Pair it with a new iPhone

Iphone

Check your health and activity settings

If you’re backing up with iCloud, go to Settings [your name] iCloud and make sure the health on.

If you back up using iTunes, encrypting the backup. To keep your content healthy and active.

tedious method

This method allows you to use the Apple Watch with multiple iPhones, but not in the way you probably want. This method assumes that you won’t switch between iPhones with any great frequency. Using this method simply requires you to pair and disconnect the Apple Watch from your first iPhone and then pair it with your other iPhone. When you want to switch back, you repeat the process in the other direction.

If you decide to go that route, know that your Apple Watch backups won’t move freely between your iPhones. If you’re restoring your second iPhone from a backup of the first one you made after splitting the Apple Watch, you can restore your Apple Watch from the backup when you switch back to your second iPhone. But assuming you don’t restore your first phone, you won’t have the same luxury of transferring the Apple Watch back to your first iPhone.

How to switch the Apple Watch to a new iPhone without backing it up

If you’re thinking about starting over on your new iPhone without a backup, you have two options.

Option one: If you don’t need any of your health data, etc. П., You can start from scratch on both devices. You will lose your downloaded apps and your health data, including all saved workouts, GPS routes, heart rate data and achievements.

Second option: if you want your uptime data, you can transfer it to your iPhone and Apple Watch with a clean install, but only if you use iCloud and iOS 11 or later. To do this, you’ll need the Health toggle switch enabled in iCloud Settings. If you have a lot of health data, you may have to wait a while before everything is synced, so make sure you haven’t deleted your old iPhone before this is done.

Once your health information is synced, follow these steps to set up your Apple Watch:

  • Follow the non-compliant repair instructions above to upset your watch.
  • Once you have finished setting up your iPhone, open the Watch app. (You can also bring your Apple Watch next to your iPhone to bring up a similar interface on the Airpods pairing screen, which will then launch the Watch app.)
  • Follow the instructions: How to set up the Apple Watch and connect it to your iPhone

How to Transfer the Apple Watch to Your New iPhone

pair, iphone

If you’re the lucky owner of one of the best new iPhones, you may be wondering what to do with your Apple Watch. Here’s how to transfer your current wearable device to your new iPhone! Here’s how to transfer the Apple Watch to your new iPhone.

Want to know how you can pair your new watch with your existing iPhone? Here’s how to set it up.

Press and hold the side button on the watch until the Apple logo appears on the screen. Bring your phone close to your wearable device until the pairing screen appears on your smartphone. Tap “Continue.”. You can also select “Set as New” in the Apple Watch app on your iPhone.

Open the Watch app on your iPhone, go to the “My Watch” tab, and select “All Watches” at the top of the screen. Tap the “i” icon next to the watch you want to unpair, then select “Pair with Apple Watch”. Tap again to confirm and wait for the watch to pair with it.

Set up your new iPhone. When asked, if you have an iCloud or iTunes backup, choose the latest backup to restore your data from your old device to your new device. Make sure your to your iPhone and Apple Watch before the date, otherwise you may not see your backup listed.

If your iPhone asks if you want to use your Apple watch, tap continue. If you haven’t been asked, you can still set up your Apple Watch manually in the next step. Help you. If your iPhone doesn’t ask if you want to use your Apple Watch.

Check your health and activity settings

If you’re backing up using iCloud, go to Settings [your name] iCloud and make sure the health on.

If you back up using iTunes, encrypt the backup. To keep your health and activity content.

How to Connect the Apple Watch to Your iPhone

Synchronizing two devices technically means pairing, but today the term is also used in the home.

Before pairing your smartphone with the Apple Watch, you must first perform the following steps:

  • recharge your watch. It comes with the original charger in the form of a washer, to which you need to lean the gadget with the magnetized side;
  • A successful synchronization will require an iPhone connection to the Internet (via Wi-Fi, but mobile Internet is also suitable). Also check that Bluetooth is activated. If not, do it in the settings;
  • check whether the iPhone has a pre-installed Watch application. many users uninstall unused or unnecessary applications to free up memory.

As soon as the watch is 100% charged, you can start the synchronization procedure. You can do it manually or automatically (more correctly called semi-automatically).

Automatic pairing with the Apple Watch Smart Gadget

For beginners this method is recommended. it is the easiest, because the pairing between the devices is done without the user’s participation, in automatic mode. Step-by-step algorithm:

  • First of all, activate the watch by pressing the button above the wheel and holding it for a few seconds until the apple icon appears on the screen;
  • the next step is to choose the language;
  • after that a message about successful connection with iPhone should appear on the smart-watch screen;
  • now you need to bring the watch to your smartwatch and a message should appear on the screen recommending you to use your phone to configure the smartwatch. The appropriate application should launch automatically. If for some reason this does not happen. open the utility manually. On its home screen, there will be just one button. “Create a pair.”. Tap on it;
  • When the devices start to synchronize, they should be in close proximity to each other. The process may take several minutes, after which a special identifier will appear on the smartphone screen. You’ll need to hold the Apple Watch up to the camera, focusing on the yellow frame;
  • Once the procedure is complete, the app will ask if you want to create a new copy of the Smartwatch on your smartphone, or if you can use a previously saved backup copy. If you are synchronizing for the first time you should choose the first option. The second is used when the watch is lost or updated. All data about the gadget in this case is saved in the service iCloud, so you can restore the information at any time without having to perform a reconfiguration;
  • now the app needs to tell you which wrist you plan to wear the watch on. Right-handed people usually wear it on the left hand and left-handed people on the right hand;
  • after that, you need to agree to the terms of the user agreement and then enter your account password;
  • then you will be offered to activate the assistant Siri (you can refuse and do it later) and turn on the geolocation tracking (this function has a number of default settings, which can be changed);
  • After that, a message will appear, recommending to send reports on Smartwatch malfunctions to the Apple Technical Support Service. You can agree or refuse, the first option is preferable;
  • one of the last procedures is to enter a four-digit numeric password. This pin code will need to be entered each time the watch is removed. Such a measure, according to the developers, will protect the gadget from theft;
  • Before the final stage, the utility will update the Apple Watch operating system to a fresh version and then offer to download and install specially adapted software;
  • The synchronization procedure is completed by the automatic setting of the parameters indicated in the previous steps, which lasts quite a long time, up to 15 minutes.

Manual pairing

The manual mode of synchronization requires from the owner a little bit more effort, but in this case the user does not need to have special skills. Strictly speaking, the pairing procedure differs from the above by only a few steps. After selecting the language and successfully synchronizing the devices, you should press the button that initiates the manual mode, then press the “i” button and you will be prompted to enter your Apple Watch serial number (you can find it on the case, it is engraved on the circle, it is a combination of digits following the word IMEI). We bring the Smart watch to the iPhone again, and after that the procedure is exactly the same as for the automatic setup.

So, you are familiar with the instructions on how to configure the Apple Watch. Rarely, but there are situations when the devices need to be unsynchronized. Let’s look at how to do it.

How To Pair your Existing Apple Watch To Your New Iphone.

Alas, Apple does not provide such a possibility. During pairing, the watch communicates only with one device. This is done for security reasons. To pair with each iPhone, you must first perform the unlinking procedure from the previous one.

No, Apple has not allowed two iPhones/iPads to be connected to one Apple Watch at the same time, it is now impossible. This watch can work exclusively with one of your devices: iPhone; iPad.