Nokia 5220 No Sim

# 06 #. show IMEI (International Mobile Equipment Identity). international mobile equipment identifier

Nokia
# 7370925538 # (valet code reset) 6230
# 746025625 # [# sim0clock #]
# 92702689 # [# war0anty #]

# 7370925538 # (valet code reset) 6230
# 746025625 # [# sim0clock #]
# 92702689 # [# war0anty #]
To access the service menu of the device, dial 3001 # xxxxx #, where xxxxx. security code, which by default is 12345. Thus, to enter the menu you will need to dial 3001 # 12345 # In this mode, for example, you can change the name of the network operator displayed in standby mode. To do this, select NAM1, scroll to the Alpha Tag sub-item, change it as desired (for example, write Vovochka and press OK. To exit the mode, turn off and on the phone.
It is possible that this code also works on other phone models (51xx, 61xx).

# 0000 #.day and version of the phone software
# 06 #.on many imei phones
# 92702689 #.something butnuyu menu-I don’t know why
# 3370 # and # 3370-on and off call quality. Like, but not all operators support this crap. At the very Nokia, the firmware was v 5.79

service code NOKIA 51205125:
In addition to the above, there is still a couple of SERVICE CODE
1) # 639 # (# NEW #) is used to add a number, i.e. you can register several phone numbers, and switch between them.

2) # 92772689 # (# WARRANTY #)
1) Serial number
2) Release Date
3) Date of reprogramming
4) The date of the last repair.
5) Enables data transfer
6) Total talk time.

3) # 837 # or # VER # phone version (not supported by all models)

4) # 9999 # or # 6120 # softa version (not supported by all models)

before changing anything in the settings
GOOD THINK IF YOU CAN RETURN EVERYTHING BACK TO THE PLACE
ESPECIALLY IN ITEM 1
It is not possible to change the operator name on all NOKIA models in the latest models, this chip is blocked by the manufacturer.
the only (almost) plus of this service code # 3001 # 12345 # is the ability to restore “FORGOTTEN” password to enable the mobile.
And the second plus. the level of the received signal is visible.
NOKIA 2110
Show EMEI Number # 06 #
Show phone software version # 9999 # or for 2110i # 170602112302 # or # 682371158412125 #
Show phone production date # 3283 #

3110
Show EMEI Number # 06 #
Shows software version # 3110 #
Restores factory settings. # 7780
Entrance to the special menu # 92702689 Commands in the special menu:
6232 OK shows the month and year of release
7332 OK shows the date of the last change in the program
7832 OK shows the date of sale (if entered)
37832 OK, you can enter the sale date of MMYY (carefully! Then cannot be changed)
9268 OK shows the serial number (IMEI)

5110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function # 3370 #
To enable the EFR 3370 # function
To reduce the battery discharge rate and enable the HR (Half Rate) 4720 # function then turn the phone off and on again.
To enable HR # 4720 #
To disable SP encodings (provided that the machine’s PIN code is enabled): When prompted for a PIN code, press “FROM”, then. “up arrow” or “arrow to down”. Click “FROM” until the display is clear. Then enter the command to change the PIN code, but do not actually change it. 04PINPINPIN # The only problem is that this procedure will have to be repeated each time the device is turned on.

6110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function # 3370 #
To enable the EFR 3370 # function
To reduce the battery discharge rate and enable the HR (Half Rate) 4720 # function then turn the phone off and on again.
To enable HR # 4720 #
To view IMEI number # 06 #
Show software version # 0000 #
Entrance to the special menu # 92702689 Commands in the special menu:
6232 OK shows the month and year of release
7332 OK shows the date of the last change in the program
7832 OK shows the date of sale (if entered)
37832 OK, you can enter the sale date of MMYY (carefully! Then cannot be changed)
9268 OK shows the serial number (IMEI)

7110
View firmware version # 0000 #
View IMEI # 06 #
Entering the service menu: # 92702689 # By successively pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2 MM / YY (release date)
3 Date of purchase (here you can enter the date of purchase if your phone is new. Remember that the date is entered once and if you entered the wrong date, then it will be impossible to fix it later!
4 Date of repair (if repairs were made)
5 Transfer date to user? ATTENTION: to exit this mode, turn off and on the device again.
Checking whether the card supports SIM-clock-stop mode (only for firmware version 5.24 or later) # 746025625 #
Enable Enhanced Full Rate Codec (EFR): 3370 # will be activated after rebooting the phone (consumes more power) Disable Enhanced Full Rate Codec (EFR): # 3370 # and EFR will be disabled after rebooting the phone
Enable Half Rate Codec: (only available for firmware version 4.33 or earlier) enter 4720 # and Half Rate mode will be enabled after rebooting the phone Disable Half Rate Codec: enter Enable # 4720 # and Half Rate Codec will be deactivated after rebooting the phone

# 06 #. IMEI smartphone (IMEI number. Consists of 15 digits, it is unique and every phone has it). This number must match the number on the box.
# 0000 #. firmware number
safe mode (“PENCIL”Power)
# 7780 #. restoration of the initial (working) settings of smart
# 7370 #. reset smart to factory settings (i.e. all software, contacts, calendar, etc. are deleted. smart becomes clean!)
ATTENTION! To use the last two codes, you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone. “PENCIL””Power butttion”
Upload to Safe:
1. Turn off the phone
2. Click “PENCIL” (and DO NOT let go)
3. Press the power button
4. Hold “PENCIL” until FULL download.
# 2820 #. a unique address for the Bluetoth module of your device (may be needed by other devices that cannot display names).
# 7370925538 #. cleanup “Wallet” (for 6600 and above. in which there “Wallet”)
3370 # (the phone should reboot) improves sound quality (using EFR), but reduces battery life.
# 3370 #. resets sound quality to normal (cancels code 3370 #).
EFR CODEC (Enhanced Full Rate)
When turned on, this function should, in theory, significantly improve the quality of the transmitted speech, but, unfortunately, it should be supported by the mobile operator. When it works, the phone’s power consumption in the talk mode is slightly increased (about 5%). As far as we know, not one of the Russian mobile operators supports this function. The principle is based on another speech compression algorithm (ACELP) and occupies a wider frequency band.
4720 #. enable Half Rate Codec (HFR)
# 4720 #. disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly affects the quality of speech, but saves the battery somewhere by 30%. Again, should be supported by the mobile operator.
# 92702689 #. access to the service menu [# war0anty #]

The secrets of NOKIA 6600 and other smartphones

# 06 #. IMEI smartphone

# 0000 #. Firmware number

# 7780 #. Restoring the original (working) settings of the smartphone

# 7370 #. Reset smartphone to factory settings (all software, contacts, calendar, etc. are deleted, the phone becomes clean)

# 2820 #. Bluetooth code (unique address of the Bluetoth module)

# 7370925538 #. cleanup “Paperwork” (for 6600 and above. and which there are”Paperman”)

Safe Mode when you turn on the phone. “Abc””Power butttion” (in 3650 “Abc”. this is “pencil”)

Download to Safe:

1. Turn off the phone
2. Click “Abc” (and DO NOT release it)
3. Press the power button
4. Hold “Abc” to FULL phone downloads.

And here is another additional way to format the phone (with the loss of all data), in that case, if you can’t even type the coveted code # 7370 # or even start the key: in the off state, hold down three keys simultaneously, the green one for answer, the asterisk and the key “3”. And now turn on tryby without releasing the keys. Formatting starts.

To use codes # 7780 # and # 7370 #, you will need to enter a lock code (default is 12345).

## 002 # cancel all redirects.

004number # enable forwarding of all calls to the entered number.

Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows Serial Phone Number (IMEI)
# 06 #

Software Version
# 0000 #

1 line. Version
2 line. Program Release Date security.
3 line. Phone type.

Warranty Codes:
# 92702689 # (= # war0anty #)
You will be asked to type “warranty code”,

The service menu will be displayed:
IMEI (International Mobile Equipment Identification)
Phone Release Date MM / YY
Phone purchase date
Repair Date
Transfer user data?

3370 #. Activation of the full-size encoding mode (Communication quality increases, battery life decreases)

# 3370 #. Deactivating full-sized encoding mode.
Note: After entering these codes, the phone will restart with the new settings.

Check if you can stop SIM Clock:
# 746025625 # (= # sim0clock #)

Codes for determining whether LOK is installed on the device or not
Your Nokia can be blocked by 4 types of locks:
SPROVIDER-LOCK. 1
NETWORK-LOCK. 2
COUNTRY-LOCK. 3
SIMCARD-LOCK. 4

To check the status of these locks, enter the line:
#pw (MASTERCODE) (y) #, where
– p = press 3 times
– w = press 4 times (in the original, vice versa w. 3 times, p. 4)
– = press 2 times
– MASTERCODE = exactly the thing that locked your device. But to check the status, 1234567890 is entered
– y = number from 1 to 4

If the phone is blocked by a Service Provider (SP) code that is unknown, then try the following:

1. Pin code request should be included;
2. turn on the phone;
3. when prompted for a Pin code, press C, then the up or down arrow;
4. Press C and hold until the display clears;
5. Now enter the command to change the Pin code, but without changing it;
04PinPinPin #
This operation must be repeated each time the machine is turned on.

Half Rate Codec:
Turning on:
4720 #. Half Rate will be activated after the phone is overloaded (power consumption is reduced)
Shutdown:
# 4720 #. Half Rate will be turned off after overloading the phone
Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of transmitted information, but loads your provider’s network more, while the duration of the conversation decreases by about 5%

Half Rate mode degrades sound quality, but unloads the network and allows the provider to miss more calls through it, while the duration of the conversation increases by approximately 30%

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (2 first digits = country code).
FAC = Final Assembly Code (For Nokia FAC = 10).
SNR = Serial Number.
SP = Spare (always SP = 0).

04 oldPINnewPINnewPIN #. Change PIN

042 old PIN2 new PIN2 new PIN2 #. Change PIN2 code

05PUKnewPINnewPIN #. Unlock PIN

052PUK2 new PIN2 new PIN2 #. Unlock PIN2

# 35 #. Check the blocking status of all incoming calls

35code #. Activate blocking of all incoming calls

# 35code #. Disable blocking of all incoming calls

# 33 #. Check the blocking status of all outgoing calls

33code #. Activate block all outgoing calls

# 33code #. Disable blocking of all outgoing calls

# 330code #. Check the blocking status of all calls

330code #. Activate block all calls

# 330code #. Disable block all calls

Nokia Code function

3370 # This Nokia code activates Enhanced Full Rate Codec (EFR). Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
# 3370 # Deactivate Enhanced Full Rate Codec (EFR).
# 4720 # Activate Half Rate Codec. Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
# 4720 # With this Nokia code you can deactivate the Half Rate Codec.
# 0000 # Displays your phones software version, 1st Line: Software Version, 2nd Line: Software Release Date, 3rd Line: Compression Type.
# 9999 # Phones software version if # 0000 # does not work.
# 06 # For checking the International Mobile Equipment Identity (IMEI Number).
# pw12345678901 # Provider Lock Status. (use the “” button to obtain the “p, w” and “” symbols).
# pw12345678902 # Network Lock Status. (use the “” button to obtain the “p, w” and “” symbols).
# pw12345678903 # Country Lock Status. (use the “” button to obtain the “p, w” and “” symbols).
# pw12345678904 # SIM Card Lock Status. (use the “” button to obtain the “p, w” and “” symbols).
# 147 # This lets you know who called you last (Only vodofone).
# 1471 # Last call (Only vodofone).
# 21 # This phone code allows you to check the number that “All calls” are diverted to.
# 2640 # Displays phone security code in use.
# 30 # Lets you see the private number.
# 43 # Allows you to check the “Call waiting” status of your cell phone.
# 61 # Allows you to check the number that “On No Reply” calls are diverted to.
# 62 # Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
# 67 # Allows you to check the number that “On busy calls” are diverted to
# 67705646 # Phone code that removes operator logo on 3310 3330
# 73 # Reset phone timers and game scores.
# 746025625 # Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.
# 7760 # Manufactures code.
# 7780 # Restore factory settings.
# 8110 # Software version for the nokia 8110.
# 92702689 # Displays. 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
# 94870345123456789 # Deactivate the PWM-Mem.
21number # Turn on “All calls” diverting to the phone number entered.
61number # Turn on “No Reply” diverting to the phone number entered.
67number # Turn on “On busy” diverting to the phone number entered.
12345 This is the default security code.
press and hold # Lets you switch between lines.

Input of all “indications” directly one behind the other. without “blanks” (these serve only the better overview).
Code
last change Function / description / information
# 06 #
12.16.03 Seriennummer / IMEI indicates (actually also a GSM is code. See further below)
# 0000 #
12.16.03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
# 2820 #
12.16.03 Bluetooth (BT) device address indicate.
xx #
12.16.03 Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
A / from key
12.16.03 Short pressing for menu for switching between profiles
Menu key
12.16.03 Long pressing for “task manager”. switching between active programs (with “C” key programs can be terminated.)
Menu quick access
01/18/04 Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm / Icon).
Autostart go around
12/28/03 When switching on of the Handys on to the pin inquiry the key “Abc” (pin) comes the whole time keeps pressed. this is to ignore (allegedly) the autoinitialization programs.
#
02/15/04 Do not switch between different lines (AS). goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
12/16/03. is according to standard set the Nokia nokia-Sicherheitscode.
0000
12/16/03. is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code / password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5 / 55. 2345
0. for a long time press
10/25/04 If one the “0” in the main menue for a long time presses those homepage of the standard WAP connection is called.

Caution. starting from here the codes are “dangerous”
# 7370925538 #
# of res wallet #
12/28/03. is to be deleted the code around the “wallet”! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the “wallet” is empty, can again be put on however with new code.
# 7780 #
01/17/04 The “original attitudes” and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various “attitudes” are away. among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth attitudes
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are “neglected” (as with distribution). still there however new bell tones, etc. are.
SMS / MMS / E Mail attitudes
Logos and spielstaende (allegedly) also deleted.
Programs, calendars and contacts, etc. not changed.
Also the sicherheitscode remains.
This putting back goes also via menu under “attitudes. general. original telephone once.”.
# 7370 #
01/21/04 Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!
This is “only” a soft format. Hard format with “green, 3, “. see below.
Green 3
01/21/04 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep “green key” (take off) at the same time pressed, “” and to “3” key and switch the equipment on (the keys thereby keep further pressed). to “Formatting” on the display appears.
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try.
“only” virtual the memory is generally cleared. genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and / or new L.G. is installed.
Mixed
12.16.03 # 92702689 #, then switch. system menu off (goes with me not)

The following code do not fold (with me also):
EFR0 # (3370 #) EFR activate (EFR = Enhanced Full rate Coding. Language optimization)
# EFR0 # (# 3370 #) EFR switch off
HRC # (4720 #) HRC switch on (HRC = helped rate Coding. Language compression)
# HRC0 # (# 4720 #) HRC switch off
SIM LOCK
01/12/04 Simlock status query: (use “” the key over “p, w” and “” indications to enter)
# pw 1234567890 1 # Provider LOCK status
# pw 1234567890 2 # network LOCK status
# pw 1234567890 3 # Country LOCK status
# pw 1234567890 4 # Sim Card LOCK status

The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and / or DCT 4 code Calculator from IMEI, etc.

Info. to Simlock: SIM LOCK makes it for the offerer / network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated. in addition the warranty can purged. I take over for it no adhesion or responsibility!

SMS Tipps
01/27/04 To Tipps cheat about SMS (with appropriate codes) are immediately in the FAQ list.
For example for the topic: SMS “retard” and / or deferred send, acknowledgment of receipt, reports.
Mark more simply
03/01/04 To Tipps cheat to the topic “mark” e.g. with SMS entrance.
Over simply to mark simply the “pin” (ABC key) hold some e.g. SMS and move then Jostick downward.
Call number transmission
01/01/04 31 #. CLIR. Calling LINE identification Restriction switches on for the general call number transmission
# 31 #. switch off the general call number transmission
# 31 # [telephone number]. with the next call suppress the own call number (thus temporary)
31 # [telephone number]. with the next call transfer own call number (thus temporary)
# 31 #. status query (of call number transmission)
# 31 [telephone number]. own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz (betreiber).)

This also partly goes with 6600 via Men: Attitudes. calls. own No. send

The following codes are not supported by most Netz (betreibern):
# 76 #. announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) COLP. COonnected LINE identification presentation
76 #. switch on
# 76 #. switch off

# 77 #. announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) Colr. Connected LINE identification Restriction
77 #. switch on
# 76 #. switch off
Call bypasses (call Forwarding)
01/01/04 Bypass code (U):
U = 21 always
U = 61 retards
U = 62 not reachable
U = 67 occupies

U = 61, 62, 67 can be parallel active

U = 21. and then no more call signaling overwrites U = 61.62 and 67! Service code (D):
Not all nets support all services
D = 10 language and fax (all calls)
D = 11 only language
D = 12 all data (speed / minutes)
D = 13 only fax
D = 14 DATEX j (active?)
D = 15 teletex (active?)
D = 16 only SMS
D = 18 all data except SMS
D = 19 all services except SMS
D = 20 all services
D = 21 all asynchronous services
D = 22 all synchronous services
D = 23 3.1 kHz GSM of language services
D = 24 all synchronous POINT ton of POINT DATA inclusive. PADs
D = 25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D = 26 DATA pack exchange on the left of inclusive. PADs
D = 27 services thru PADs
D = 29 12 Kbps digitally left

U [goal call number] D #. bypass switch on
Input without D means bypass of all services

## U D #. switch bypass off (individual bypasses and service code)
Without D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U = 61, 62, 67 and for all service codes. Thus “, not attainable, nonacceptance “occupies)

# U D #. status of the bypasses query:
Input without D queries all services and bypasses

Bypass in the speaking and / or fax box: Number in bypass procedure with D = 11 and / or 13 enter
Goal call number (e.g. D2-Netz: 49.172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.

Tap: During switched on rufumleitung “with occupied” being able “to reject” calls by one the red key during “to ring” presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: 61 [goal call number] 11 [time in sec. (5 to 30)] #

This also partly goes with 6600 via menu: Attitudes. rufumleitungen.
Knock / stops / parks / faults
01/01/04 Knocks is signaling a secondary call during a current discussion
43 #. switch on
# 43 #. switch off
# 43 #. status query

This also partly goes with 6600 via menu: Attitudes. calls. knocking.

0. reject while the discussion a knocking
1. discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y)
2. discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y)

0. caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion.
Call barrier
01/01/04 Possible only if bypass of the service code is switched off.
Check code (S):
S = 33 all outgoing transmissions
S = 331 outgoing abroad
S = 332 outgoing abroad except home
S = 35 all arriving transmissions
S = 351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S = 330 check code status outgoing arriving transmissions switch off
S = 333 check code status outgoing transmissions switch off
S = 353 check code status arriving transmissions switch off Service code (D):
Not all nets support all services
D = 10 language and fax (all calls)
D = 11 only language
D = 12 all data (speed / minutes)
D = 13 only fax
D = 14 DATEX j (active?)
D = 15 teletex (active?)
D = 16 only SMS
D = 18 all data except SMS
D = 19 all services except SMS
D = 20 all services
D = 21 all asynchronous services
D = 22 all synchronous services
D = 23 3.1 kHz GSM of language services
D = 24 all synchronous POINT ton of POINT DATA inclusive. PADs
D = 25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D = 26 data packet exchange links incl. PADs
D = 27 services thru PADs
D = 29 12 Kbps digital link

S [Passwort] D #. einschalten der Anruf-Sperre
# S [Passwort] D #. ausschalten der Anruf-Sperre
# S #. Status der Anruf-Sperre abfragen

Passwort fur Handy Sperre andern:
03 [altes Passwort] [neues Passwort] [neues Passwort wiederholen] #
03 330 [altes Passwort] [neues Passwort] [neues Passwort wiederholen] #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen. Anrufsperre.
PIN andern
01/01/04 04 [alte PIN] [neue PIN] [neue PIN wiederholen] #
042 [alte PIN 2] [neue PIN 2] [neue PIN 2 wiederholen] #

PIN entsperren: 05 [PUK] [neue PIN] [neue PIN wiederholen] #
PIN 2 entsperren: 052 [PUK2] [neue PIN 2] [neue PIN 2 wiederholen] #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen. Sicherheit. Telefon und SIM.
Universe codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen / Netzbetreibern. leider z.B. nicht im Vodafone D2 Netz (in Deutschland):
#100#. Eigene Nummer (Own Number)
# 101 #. Hlr nummer
# 102 #. Switch nummer
# 103 #. Zeit im Netz (Network Time)
# 104 #. Anrufbeantworter Nummer (Voice mailbox number)
# 105 #. Switch number
# 147 #. Letzter Anrufer (Last Caller)

# 646 #. Minutes Used: (646 spells ‘MIN’)
# 1345 # or 174 #. Vodafone prepaid balance

78. Do not disturb. nur in Nord America in GSM und CDMA Netzen moglich
79. Cancel (s.o.)

GSM codes for Nokia 5220 XpressMusic
These codes, dialed from a GSM telephone, are used to enable or disable various standard functions and services. Some of them duplicate the functions of the menu, some not.

Legend:
@ = send button (Handset, OK, YES, Navi)
= enable or activate
= active
## = disable and deactivate
# = inactive

CHANGE PIN CODE Nokia 5220 XpressMusic
Change PIN 1 04 old PIN1 new PIN1 new PIN1 # @
Change PIN 2 042 old PIN2 new PIN2 new PIN2 # @
Unlock PIN 1 05PUKnewPIN1newPIN1 # @
Unlock PIN 2 052PUK2new PIN2new PIN2 # @

PUK. code that must be provided by the operator when buying a phone or connecting. In the absence of this code, or entering the wrong PUK ten times, your phone will be completely blocked!

If the code obtained by entering this command and the code on the back cover of the phone do not match, then your phone may “Gray”.

FORWARDING CALLS FOR Nokia 5220 XpressMusic
Deactivate all types of call forwarding ## 002 # @
Deactivate all conditional redirects ## 004 # @
Activate all conditional redirects 004phone_number # @

Forwarding All Calls Nokia 5220 XpressMusic
Deactivate and Disable call forwarding to another number ## 21 # @
Deactivate call forwarding to another number # 21 # @
Set a number and activate call forwarding to another number 21 phone number # @
Activate call forwarding to another number 21 # @
Check the status of call forwarding to another number # 21 # @

FORWARDING IN CASE OF NO RESPONSE TO THE CALL
Activate call forwarding to another number if the subscriber does not answer 61 phone number # @
Deactivate and turn off call forwarding if the subscriber does not answer ## 61 # @
Deactivate call forwarding if the subscriber does not answer # 61 # @
Activate call forwarding if the subscriber does not answer 61 # @
Check call forwarding status if the subscriber does not answer # 61 # @

FORWARDING IN THE CASE IF THE SUBSCRIBER IS OUT OF THE COVERAGE ZONE
Activate call forwarding to another number if the subscriber is out of coverage area 62phone_number # @
Activate call forwarding if the subscriber is out of coverage 62 # @
Deactivate and turn off call forwarding if the subscriber is out of coverage ## 62 # @
Deactivate call forwarding if the subscriber is out of coverage area # 62 # @
Check forwarding status if the subscriber is out of coverage area # 62 # @

FORWARDING IN CASE IF THE PHONE IS EMPLOYED
Activate call forwarding to another number if the phone is busy 67 phone number # @
Activate automatic call forwarding if the phone is busy 67 # @
Deactivate and turn off call forwarding if the phone is busy ## 67 # @
Deactivate call forwarding if the phone is busy # 67 # @
Check the status of automatic forwarding if the phone is busy # 67 # @

SETTING THE NUMBER OF HARNESS BEFORE ACTIVATING A REDIRECTION
N = 5-30 (seconds)
Set the number of beeps 61 Voice Mail Number N # @
Discard previous installation ## 61 # @

BAN ALL ALL OUTGOING CALLS Nokia 5220 XpressMusic
Change barring password 03330 oldPasswordPasswordPassword # @
Activate barring of all outgoing calls 33 Password # @
Deactivate barring of all outgoing calls # 33 Password # @
Check the barring status of all outgoing calls # 33 # @

Barring All Calls Nokia 5220 XpressMusic
Activate all call barring 330 Password # @
Deactivate barring all calls # 330 Password # @
Check status barring all calls # 330 Password # @

BAN ALL ALL OUTGOING INTERNATIONAL CALLS Nokia 5220 XpressMusic
Activate barring of all outgoing international calls 331 Password # @
Deactivate barring of all outgoing international calls # 331 Password # @
Check barring status of all outgoing international calls # 331 # @

BAN ALL ALL OUTGOING CALLS Nokia 5220 XpressMusic
Activate barring of all outgoing calls 333 Password # @
Deactivate barring of all outgoing calls # 333 Password # @
Check barring status of all outgoing calls # 333 # @

Barring All Incoming Calls Nokia 5220 XpressMusic
Activate barring of all incoming calls 35PW # @ or 353 Password # @
Deactivate barring of all incoming calls # 35PW # @ or 353 Password # @
Check the barring status of all incoming calls # 35 # @ or # 353 # @

Barring All Incoming Calls When Roaming
Activate barring of all incoming calls when roaming 351 Password # @
Deactivate barring of all incoming calls when roaming # 351 Password # @
Check the barring status of all incoming calls when roaming # 351 # @
Activate call waiting 43 # @
Deactivate Call Waiting # 43 ## @
Check Call Waiting Status # 43 # @

SENDING or PROHIBITING SENDING YOUR PHONE NUMBER WHEN CALLING
Deny sending your phone number # 30 # phone number @
Allow sending your phone number 30 # phone number @
Check the status of sending your phone number # 30 #

CODES FOR SENDING / FORBIDDEN DETERMINATION OF NUMBERS FOR INCOMING CALLS
Disable caller ID on your phone 77 #
Allow caller ID display on your phone # 77 # @
Check the caller ID display status on your phone # 77 # @