My iPhone can’t connect to WI-FI

iPhone will not automatically connect to WI-FI how to fix it

If you’ve been having problems with WI-FI on your iPhone, don’t freak out because you’re not the only one having connectivity issues. and more iPhone users are reporting that their device will not connect to the WI-FI network, while some users can connect, but the bandwidth is constantly dropping.

The problem may be caused by the overheated WI-FI chip, but there is a list of other suspects that can block the connection of your iPhone. Read on and we’ll give you some tips and advice that may help you solve your problem.

iPhone not connecting to WI-FI: what to do next?

The situation when iPhone does not connect to WI-FI, causes a lot of questions for owners. It is not always possible to determine the cause, because at first glance the device is fine, the Wi-Fi module works, and the router successfully distributes the Internet. Below we consider the causes of the situation and provide steps to quickly resolve the failure.

How to enable automatic connection to the network

Going into the iPhone settings every time, activating Wi-Fi, searching for an available network and entering a password is extremely inconvenient. To avoid unnecessary movements, it is recommended to confirm the automatic connection to the network. Whenever the user activates the Wi-Fi, it will pair with one of the access points without entering the password.

All you need to do in this case. deactivate the slider next to the item “Connection request”.

After performing this simple operation iPhone will not ask which network to choose for pairing. The connection will be made automatically. However, this does not apply to the initial setup. You will still need to enter the password once, but afterwards the user will be rid of additional manipulations.

Reconnect to Wi-fi network

It is recommended to make one or more more attempts to connect the smartphone to the Internet, if iPhone does not see the network, or does not want to connect to it the first time.

My iPhone Won’t Connect To Wi-Fi! Here’s The Real Fix.

iPhone 8, as well as other versions on the desktop has a settings icon. It is necessary to go there and:

  • Select about Wi-fi.
  • Click on the name of the current connection and find the phrase “Forget this network.
  • Next, again refresh the list of devices nearby and touch the desired name.

If the difficulty could not be solved in this way, then that is not the reason. So you need to proceed further, using each of the algorithms below, based on the degree of probability of a particular problem.

Updating iOS to the latest version

If the iPad does not connect to Wi-Fi, the problem lies in the relevance of the updated version. Many product users forget about the need to update iOS regularly. This leads not only to the lack of connection to the router, but also other system problems: not enough memory, the speed of recoil, and so on.

Read more:  How to connect wireless headphones Honor

To check the presence of the current version, it is enough to look at the “gear”. You can see the availability of updates in “Notifications”. Their presence is indicated by a red indicator on the cell. To do this, you need to run the update, and wait for the installation to complete.

Keep in mind that installing the update requires free memory. The installation may be related to a new interface, additional maneuvers, new applications and, of interest to us, an updated connection.

Start by rebooting your device: turn off your iPhone and then turn it on again. Maybe this will help to get rid of the problem. If not, proceed to checking the password.

iphone, connect, wi-fi

Incorrect password

The first time you connect to a password-protected network you will have to enter your password. If you enter it incorrectly, the device will not be able to connect to the channel. To be able to re-enter the password, follow these steps:

    While in the settings of the device go to the Wi-Fi block.

Reboot your router

Very often the reason is that the network distributed by the router is no longer working. This can happen for many reasons, for example the router was overloaded by a large number of connected devices, or the signal is lost due to problems on the side of the operator providing Internet.

Make sure that the internet is working by trying to use it directly from your computer instead of through your router. If it works, then reset your router and try reconnecting to Wi-Fi from your mobile device.

Resetting router settings

If rebooting the router doesn’t help fix the problem, it’s worth trying to reset it to factory settings. It is necessary to perform only one action: to press the Reset button, usually located on the back of the router, for 10-15 seconds. If the reset was successful the router will restart automatically. After performing a rollback, the network password will reset, and you’ll have to try connecting to Wi-Fi again from your phone.

Resetting network settings

Your iPhone settings may have been messed up. They can be reset to factory settings without affecting the rest of the device’s settings, files, or applications:

    Being in the device settings, select the “Main” block.

Go to the “Reset” section, press the “Reset network settings” button

Wi-Fi module is broken

Your iPhone’s built-in Wi-Fi module is responsible for the signal reception. But it could be broken if your phone has been dropped or tampered with. Your device will notify you if the module is broken. the Wi-Fi icon will turn gray in your settings. The only way to fix the module is to take your device to a specialized service, leaving it to qualified professionals. Pay attention to your phone’s warranty period, it may not be expired yet, and you can get your iPhone repaired for free. Find more information about service centers on the official website of Apple.

Your phone may not connect to a Wi-Fi network because of an incorrect password, confused network settings, or router. The only reason you can’t fix it yourself is the module that controls the Wi-Fi network.

Read more:  iPhone 11 what color is better to choose

Disable location services

Turning it off will not disrupt your Wi-Fi experience, but it may solve your connectivity problems.

Your iPhone performs many functions designed to make it useful. One of them involves using Wi-Fi networks near you, to improve the accuracy of mapping and location services. It’s a nice little perk, but it could be the reason why your iPhone can’t connect to the Wi-Fi network. If none of these solutions have worked so far, disable this setting. This doesn’t prevent you from using Wi-Fi, just uses it to better understand your location.

  • -Tap ” Settings”
  • -Click Privacy
  • -Tap “Geolocation Services.”
  • -Swipe down and tap System Services.Move the Wi-Fi Networking slider to the “off” position

What to do if your iPhone doesn’t connect to Wi-Fi

Various factors can affect why your iPhone can’t connect to a wireless network. The following will discuss the causes of this problem.

Incorrect password

First of all if you are connected to a password-protected wireless network you must make sure that you have typed your password correctly. Usually if the security key is not entered correctly, you will see the message “Wrong network password” on the screen when you try to connect. If this happens you will need to reselect the wireless network and try again, making sure that you enter the correct password.

iphone, connect, wi-fi

WLAN failure

Often the problem with the connection lies not in the smartphone, but in the wireless network itself. To check this, just try to connect to Wi-Fi from any other device. If as a result you are convinced that the problem is on the wireless network side, it is necessary to deal with it (often a simple reboot of the router can solve the problem).

Smartphone malfunction

The iPhone is a complex device that, like any technique, can malfunction. Respectively, if the phone does not want to connect to a wireless access point, you should try to reset it.

Reconnect to Wi-Fi

If your wireless hotspot was working correctly before, but then suddenly stops working later, it could be a connectivity problem. It can be eliminated by forgetting the wireless network and then reconnecting to it.

    To do this, open the settings and select the “Wi-Fi” section.

Malfunction in network settings

iPhone automatically configures the necessary network settings, for example, those provided by your mobile carrier. There is a chance that there was a failure, which means that you should try to perform a reset procedure.

    To do this, open the settings on your phone, and then go to “Basic”.

Operating system malfunction

If none of the above methods did not help, you can go to the heavy artillery. try to perform a reset to factory settings on the phone.

    You’ll need to update the backup on your device to do that. Open the settings and choose the name of your Apple ID account. In the next window, go to “iCloud”.

Faulty WI-FI module

Unfortunately, if none of the above methods have ever helped to fix your wireless network connection problem, you should suspect that your smartphone has a faulty WI-FI module. With this type of failure, the iPhone will not connect to any wireless network, and the Internet will work exclusively via cellular data.

In this case, you should contact the service center, where a specialist will conduct a thorough diagnosis and will summarize whether the module is the problem. If the suspicion is confirmed. the problematic component will be replaced, after which the iPhone will fully work.

Use the recommendations in the article and you’ll be able to troubleshoot problems connecting your iPhone to wireless networks.

Read more:  Install on iPhone iOS 11

In addition to this article, there are 12665 instructions on the site. Add the site Lumpics.ru into bookmarks (CTRLD) and we will definitely be useful to you.

Thank the author by sharing this article on social networks.

What to do if the Wi-Fi on iPhone does not work

There are many possible reasons for this problem. And only if it is detected correctly, you can quickly fix the problem.

Wi-Fi is disabled on your smartphone

First of all check if wireless network is enabled on your iPhone.

    To do this, open the settings and select the “Wi-Fi” section.

Router malfunction

It’s easy to check: try connecting any other device (laptop, smartphone, tablet, etc.) to your Wi-Fi. д.). If all the gadgets connected to your wireless network have no access to the Internet, you should deal with it.

    First, try the simplest thing. reboot the router and then wait until it starts up fully. If this does not help, check the settings of the router, in particular. the method of encryption (preferably set WPA2-PSK). As practice shows, this very tuning item often affects the absence of connection on the iPhone. You can change the encryption method in the same menu, where you can change the wireless network security key.

iPhone may periodically malfunction, resulting in no connection to the Wi-Fi network.

    First, try to “forget” the network to which the smartphone is connected. To do this, select “Wi-Fi” in the iPhone settings.

The accessories that create interferences

For proper work of the Internet, the phone must be able to receive the signal without interference. Usually they can be caused by different accessories: cases, magnetic holders etc. д. Therefore, if your phone uses bumpers, covers (most often metal) and other similar accessories, try to remove them and check the connectivity.

iphone, connect, wi-fi

Firmware failure

If you are sure that the problem is with your device (other devices are successfully connecting to the wireless network), you should try reflashing iPhone. This procedure will allow you to remove the old firmware from the phone and install the latest version available for your specific model.

    To do this you will need to connect your iPhone to the computer with the USB cable. Then launch iTunes and put your phone into DFU (a special emergency mode, used for troubleshooting smartphone).

Faulty Wi-Fi module

If all the previous recommendations have not brought any result and the smartphone still refuses to connect to the wireless network, unfortunately we can not exclude the possibility of Wi-Fi module malfunction. In this case you should contact the service center, where a specialist will be able to make a diagnosis and exactly identify whether the module that is responsible for connecting to the wireless Internet, is faulty.

Consistently check the probability of each cause and follow the recommendations in the article. with a high probability you can fix the problem yourself.

In addition to this article, there are 12665 more instructions on the site. Add the Lumpics site.We will definitely be of use to you again.

Thank the author by sharing this article on social media.