MSI AFTERBurner how to use on a laptop. Brief acquaintance with the interface MSI AFTERBurner

Setting MSI AFTERBurner for monitoring, acceleration and cooler

MSI AFTERBurner. MSI utility that can disperse the video card from AMD or NVIDIA to maximum possible parameters, while not allowing irreversible equipment damage to the equipment.

In addition to acceleration of the graphic processor, there is also FPS monitoring, increase or decrease in GPU fans, nucleus voltage, temperature and power limitation. And in the latest version of the program, a new “Scaner” function appeared, which automatically defines the video card model and sets up stable acceleration parameters.

• Acceleration. Allows you to use GPU on maximum possibilities, avoiding irreversible equipment damage. You can subtly configure parameters such as the voltage of the nucleus, temperature, power, fan speed, the frequency of the nucleus and memory.
• Monitoring. All the parameters that can be dispersed can be monitored in a special monitoring column to understand which parameter needs to be increased or reduced.
• Benchmarking. There is a built.in “Kombustor” that provides detailed information about acceleration and how they will affect performance. Compatible with Opengl and DirectX.
• Capture video. The Predator function allows you to record games without missing a single frame and records even in format H.264. Also, it is possible to configure the limitation of personnel frequency, quality and compression types.
• Fans. When accelerating GPU, you need to consider the temperature. By increasing the speed of fan rotation, a critical overheating of the chip can be avoided. Also, if they are too noisy, and the GPU temperature is normal, then the rotation can be reduced to reduce the noise.
• FPS counter. FPS is displayed in real time of the game process. This is convenient, since you can compare the game before acceleration and after.

MSI AFTERBurner. positions itself as a safe acceleration for video cards, but this is all the same risk. I described a lot of errors on the site with a blue screen, and in some cases, it was accelerating a computer or laptop. If you encounter BSOD in Windows 10, then you will have to roll back the default rising by default.

• Drops the default acceleration settings. If you saw a critical temperature, the errors of the blue screen Windows 10, then the rapid reset by default will save you.
• Applies the settings settings.
• Saves the profile with settings. You can create several overclock configurations. For example, configure and save profile 2 as for games, and profile 1 can be created with minimal acceleration parameters when you are just on the desktop.

Download msi afterburner

Go to the official website of MSI and download AFTERBURNER by clicking on “Download AFTERBURNER“, then unpack the archive and install the program by pressing “.EXE “.

Kombustor does not go by default in the Afterburner program and it needs to be downloaded and installed separately. Go to the official Geeks3D website and download Kombustor, then install. Next, close the MSI AFTERBurner program if it was open and start it again.

The MSI AFTERBurner utility will now appear. Kombustor. Click on it to run the benchmarking settings. Set up the tests for the test and click on the “Run Stress Test” to run the test. This will give you an idea of ​​how your video card works at the base level.

These tests will help you test the dispersal settings without starting games.

How to install msi afterburner on a computer

To get started, you will need the MSI AFTERBurner program itself. Download it from the official site (link) and install it on your computer. The MSI AFTERBurner installation process does not represent anything complicated and is no different from installing any other program. Just start the installation file and click on the “Next” button.

On one of the screens, the installer will offer to choose which programs you need to install. The marks of both MSI AFTERBURNER and the RIVATUNER STATISTISTISS Server should be selected here. Since we will need both of these programs to include monitoring in games.

After the installation of the MSI AFTERBurner installation, the RIVATUNER StATISTISS SERVER installer window will appear.

In this installer, we also click on the “Next” button until this program is also established.

MSI AFTERBurner monitoring settings

After the installation is completed, we start the MSI AFTERBurner program. The appearance of this program may differ, depending on what version you have. Therefore, do not be surprised if you have MSI AFTERBURNER does not look like in the screenshot below.

In order to enable monitoring in games, you need to go to the MSI AFTERBurner settings. To do this, press the button with the image of the gear.

How to enable FPS in MSI AFTERBurner

• Open the properties of the MSI AFTERBurner program by clicking on gear.
• In the window that opens, go to the Monitoring tab Find the frame rate item.
• Activate the frame rate by setting a checkmark and mark it below show in the OED.
• Opposite the current item, select the text or schedule, which will display the number of frames per second.

In the monitoring tab, you can also enable other parameters that the user considers necessary to display on the monitor during the game. Please note that various loading parameters of a graphic nucleus or temperature are available in the MSI AFTERBurner program without an additional component Rivatuner Statistics Server. If you do not have a frame frequency monitoring settings, then make sure that Rivatuner Statistics Server has been installed with MSI AFTERBurner.

Inclusion of the necessary monitoring settings, we recommend configuring hot keys that will allow you to switch visibility during the game, show, hide the current monitoring indicators.

The last step will be the configuration of the appearance of the overlaine screen display. You can choose one of the available styles or just configure fonts and colors for yourself.

Available styles in the properties of MSI AFTERBurner. It is enough to go to the monitoring bookmark and highlighting the desired monitoring schedule click the button selection of the overlaine screen display style in the form of three points near the item to show in the OED.

In the window that opens, it is enough to choose the active style of display you like or configure the current style by changing its properties.

As well as additional settings for the display display can be found in the Rivatuner Statistics Server utility. It is enough to directly open the Rivatuner Statistics Server utility or in the properties of MSI AFTERBurner, go to the OED tab and click the button additionally.Here, in another integer, you can configure color, font, size and select the position of the text. And also many other parameters are available and the ability to immediately view the configured text parameters.

MSI AFTERBurner is a powerful tool for controlling and monitoring the parameters of the graphic adapter. It is enough for the user to download and install the MSI AFTERBurner program from the official website. The possibility of choosing the Russian language of the Inte Wee is immediately after installing the program.

MSI AFTERBurner allows you to enable games monitoring, namely, turn on the display of the number of frames per second (FPS). Previously, we considered the programs showing FPS in games, although the MSI AFTERBURner program did not fall into the list, but it can also display a meter of number of personnel per second and not only. See how to use the Speedfan 4 program.52, since it is more suitable for beginners and also control the speed of coolers connected to the motherboard.

How to set a video card in MSI AFTERBurner

Now consider the process of setting up the video card, as well as the application and preservation of its parameters. For example, try to lower the “TEMP LIMIT” parameter (maximum GPU temperature) to 70 degrees.

In order to display the “TEMP LIMIT” parameter, click on the button next to the Power Limit parameter.

As a result, the Power Limit parameter will appear another parameter with the name “Temp Limit”.

Now we move the Temp Limit slider reducing it to a value of 70 degrees, and then click on the “Apply” button in order to apply the selected settings.

All the changes made are applied. Similarly, you can change the rest of the video card parameters.

You can read more details about setting up a video card in the article:

How to save video card settings in profile in MSI AFTERBurner

After applying the settings, they can be saved in profile. This is convenient if you disperse the video card and test it with different settings or just want to switch between different operating modes.

To save the settings, press the “Save” button and select for one of 5 profiles.

After saving settings in the profile, the button with this profile will become active.

Now, in order to download old settings from the saved profile, you just need to press the button with the profile and apply the changes by the “Apply” button.

As a result of the settings from the profile will be loaded and applied.

Correctly disperse the video card

On the example of the GeForce GTX 970, they have already considered the safe acceleration of the video card. We are interested in the main parameters of Power Limit, Core Clock and Memory Clock. For light acceleration, you can leave the FAN Speed ​​parameter in the Auto position.

Twing to the right of the Power Limit slider, we remove power restrictions. The video card should not underestimate its frequencies in accordance with its declared characteristics. Now you can go directly to increasing frequencies.

For acceleration, you need to raise the Core Clock value to 20-60 MHz and apply the changes by the Apply button. Launch the stress of testing a video card or benchmark, for example, Furmark to check its stability in the acceleration. Be sure to control operating temperatures.

The experimental video card at the mark of 120 MHz hung for a while. In this case, it is better to press the Reset button to reset all the default values. It is worth reducing the acceleration frequency to 90 MHz and check the stability of the work. I think the acceleration algorithm is clear.

Capture of screenshots and videos

In the location of the settings, the capture of screenshots and the capture of the video you need to choose global hot keys. You can even configure the function of the video pre.recording (car or manually). If necessary, indicate our folder to save and format.

Inte Wee

Launch a program through a shortcut or file MSIAFTERBurner.exe, which is located in the c: \ program Files \ MSI afterburner folder, if you have not changed the standard installation path.

There are 3 buttons in the upper part: launching a stress test of the MSI Kombustor program, a program certificate, as well as information about the video card, about the processor, about the overlaine screen display server and the designated hot keys. Keep in mind that Kombustor needs to download and install separately.

The main screen of the utility is divided into 3 parts: GPU/Mem sensor (frequency and memory), the main panel with sliders and the Voltage/TEMP sensor (voltage and temperature). Below is a monitoring window, where current information is presented in the following areas:

• loading the graphic processor (%);
• loading the memory controller (%);
• Videra loading (%);
• loading tire controller (%);
• cooler speed (%);
• Coiler tachometer (rpm);
• nucleus frequency (MHz);
• Shaaders frequency (MHz);
• memory frequency (MHz);
• memory load (MB);
• loading limit;
• loading all central processors (%);
• LAMPLY OF RAM (MB);
• Downloading a swing file.

To observe all these indicators in a separate window, click the red Detach button (separate).

Below the FAN Speed ​​column is a button with a gear image. This is the program settings menu.

If you like the older cover of the intense, then we go into the “Settings”, open the Inteteis tab and put the cover you like in the section “Properties of the skins of the user integration”.

The picture shows the Default MSI AFTERBURNER V3 Skin. Big Edition.

Near the “settings” there is a button for resetting the settings of the graphic processor. The last button in this series is the option “apply” necessary for the entry into force of changes in the main parameters of the central panel.

Under the settings there is a window with information about the model of our video card and about the version of the driver. To his left, we see the Startup button. the use of all overclocking settings at starting Windows. To the right of the information window is the menu of profiles for maintaining overclocking configurations.

Central panel

Consider all the parameters of the central panel.

The main indicators here are Core Clock (MHz), video code frequency, and Memory Clock (MGC), video memory frequency. Acceleration of the video card is carried out using these sliders.

For the speed of the cooler, the FAN Speed ​​parameter is responsible, which is expressed in %. However, you will not be able to move this slider if the video adapter is not equipped with a chuler chip or controlled cooling system.

You can also put a direct dependence between the temperature and the speed of the video card fan in “Settings” → Coiler tab tab. To do this, put a checkmark at the option “Turn on the software user abstract”. On the graph, you can change this dependence by moving control gray points in different directions. This option is useful with strong acceleration, when you need to use the cooler to the maximum. In other cases, it can not be touched. In no case do not put 100 %! The cooler simply can not stand it and breaks down.

Core Voltage (nucleus voltage), Power Limit (energy consumption limit) and TEM. Limit (temperature limit) is initially inaccessible. In this example, we can unlock only Core Voltage. To do this, you need to go to “Settings” → tab “Basic” → Section “Properties of Compatibility” → Put a checkmark opposite the option “Unlock the voltage management”. Power Limit, Core Voltage and Tem. Limit can only be available if the video card supports the management of these characteristics. Our card is not one of them.

Preservation of the configuration

So we decided to stop. In order for the current frequencies and cooler speeds to always start when starting Windows, you need to click the Startup button. She will light up in red.

Next, press the profile saving button and select any of the 5 slots (cm. picture). In our case, it will be the 1st slot.

After that, go to the “Settings” menu → tab “Profiles”. In column 3D profile, our new parameters should be displayed: nucleus frequency (921), video memory frequency (2072) and cooler speed (auto). 2D profile is left unchanged.

Problems of acceleration

Some video cards may be limited or completely locked. This can be fixed as follows: in the folder with the program (C: \ Program File \ MSI AFTERBurner) we are looking for a MSIAFTERBURNER file.CFG. Open it with a notebook.

We are looking for a line unofficialoverclockingeula and write after the sign “equal” the sentence indicated in the picture. That is, we agree with all the risks that will follow after removing the restriction, as well as the fact that MSI is not responsible for our actions.

In UnofficialoverClockingMode, we set the value of 1.

Keep in mind that not all cards can remove the acceleration limit or enable voltage and energy consumption control without flashing. It also happens that acceleration succeeds only on the old version of the drivers.

Some video cards can calmly accelerate the frequency of the nucleus, but an increase in memory frequency causes serious problems. And vice versa. And on very old maps, the growth of performance can be very low, and acceleration does not make sense at all.

Preservation of acceleration results in MSI afterburner

In order for the current video cards overclocking settings to work with each launch of MSI Afterburner, you need to enable the Apply Ovecloking at System Startup option, which is at the very bottom of the program window.

You also need to go to the settings and on the “Basic” tab include the auto.loading of the MSI AFTERBurner program.

In addition, it will not be superfluous to maintain the current video cards acceleration settings in the form of a profile. To do this, click on the “Save” button, make a double click on the profile and click “Apply”.

If necessary, the video card acceleration profiles saved in MSI AFTERBurner can be activated using key combinations or automatically when starting games. To do this, go to the program settings and go to the “Profiles” tab.

Here you can specify the key combinations for each of the 5 profiles, as well as select 2D and 3D profiles. 2D profile is a profile that will work in normal mode, and 3D profile is a profile for games and other 3D applications.

Removing acceleration restrictions in MSI afterburner

Some video cards have functions that are related to acceleration can be significantly limited or even blocked. Typically, budget and mobile video cards (laptops) have such restrictions. But, in some cases, restrictions can be circumvented. To do this, you need to enable the MSI AFTERBurner program.

To do this, you need to go into the folder with a program (usually C: \ Program Files (X86) \ MSI AFTERBURNER), Find the MSIAFTERBURNER file there.CFG ”and open it using a simple text editor (notebook, NOTEPAD).

In this file, you need to find a string with the parameter “UnofficialRCLOCKINGEULA” and after the sign “=” and the span, insert the following text:

I Confirm That I am Aware of Unofficial Overclocking Limitations and Fully Understand that MSI Will Not Provide Me Any Support On IT

Thus, we agree with additional risks that are associated with the removal of dispersal restrictions, as well as the fact that MSI is not responsible for possible damage.

After that, you need to change the value of the parameter “Unofficial.aterClockingMode” from “0” to “1”.

As well as change the values ​​of the parameters “Unlockvoltagecontrol” and “Unlockvoltagemonitoring” from “0” to “1”.

After saving the file with the settings, you need to restart the MSI AFTERBurner program. It is possible that the restrictions that did not allow you to disperse the video card will be shot. But, this trick does not always work. Sometimes acceleration is rigidly blocked in the BIOS of the video card and you can bypass such a restriction only to flashing.

Creator of the Comp-Security site.NET, author of more than 2000 articles on computer repair, work with programs, setting up operating systems.

Ask a question in the Комментарии и мнения владельцев under the article or on the “Ask Question” page and you will definitely get an answer.

When I did all the acceleration procedures, leave Power Limit to maximum wages?

Yes. Without this, the video card will not be able to hold the specified frequencies.

I have a question why I do not have a TEMP Limit and Power Limit

Most likely, the video card does not support the adjustment of these parameters.

There may be old drivers for a video card or MSI AFTERBurner itself, try to update. If the video card is new, then you can try to put the Afterburner Beta, maybe the support of these functions has already appeared there.

Capabilities

To install the program, it is enough for you to have a PC working on the basis of the Windows operating system. Otherwise, any requirements are completely absent.

If we consider opportunities, there are a huge number of them, therefore, only the main among them will be listed:

• Power control of the installed graphic chip.
• Energy consumption management.
• CHIP and video memory frequency adjustment.
• Creation of several profiles for quick switching between installed settings.

Software installation

If we consider MSI AFTERBurner, how to set up a culer of a video card is an actual issue that is quite simple and quickly resolved. Further, a detailed instruction that will allow you to achieve the desired result.

Cooling speed setting

Now instructions will be presented about how to correctly configure the cooler in MSI AFTERBurner.

As for the integration, it may be different and slightly differ, but your task is to concentrate on certain points. In the lower part, find an option called “Fan Speed”. If we consider how it works by default, there is an “Auto” option there.

This indicates that the system automatically adjusts the speed of rotation of the coolers. You need to click on this “Auto” button to turn off the current mode and engage in independent setting.

To realize the plan, you will need to take the slider and put it to the appropriate level. After you achieve the desired result, click on “Apply”.

note! In order not to have problems, it is not recommended to set an indicator in the region of 100%. This will make your video card work at maximum speeds, which does not always have a favorable effect on it.

Following automatic adjustment

It is not very convenient to do everything manually, so you can make the cooler work depending on the temperature that is relevant for the graphic chip.

• In the window opened, click on the “cooler”.
• In front of you you will see a schedule for setting speed of rotation. The temperature is reflected in the horizontal strip, and the speed of rotation is reflected in vertical. Your task is to move the schedule points the way you need, and then click on “apply”.

note! You can click on the schedule and add points, which will make the work more smooth.

If MSI AFTERBURNER does not see the cooler, then you should restart the PC and try to set up again. Usually, this is a common problem only among those who did not do this action after installation.