Limiting volume in Android headphones. Example 3. Increasing volume level…

How to disable automatic volume reduction on my Android device?

Press the menu button in the upper left corner again. This time in the “Camera and Sound” section, select “Set the sound volume”. Sound volume setting block will appear on your empty page, like the sound volume block?””.

Sometimes the volume is automatically reduced due to Android protection from too high volume. Not all Android devices have such protection, because manufacturers can delete the software from the Android version, which they provide on their devices.

How can I make Android not lower the volume?

In the settings menu, select a new block. Press the menu button in the upper left corner again and select “Sound volume in the” Camera and Sound “section. When a “sound volume” block appears on your empty page, touch the “sound volume” block and perform the following actions. First, change the volume percentage at your discretion.

To do this, you need to perform the following actions:

• Enter the settings of your device.
• Find the Sounds and Vibration section and enter it.
• You will see the section “Safety of headphones“.
• Inside you can enable or disable the option to reduce loud sounds.
• If you activate it, you can choose the level of DB that you want to mark as the limit.

Increase the volume of the speaker

You need to start with the most banal actions: make sure that your phone is not disconnected on your phone. Perhaps you accidentally put the mode “without sound” or “not to disturb”.

When adjusting the volume with the help of side buttons, three sliders are displayed: ringtone, alarm and multimedia. Users often confuse these modes and lower the sound at all the function that they wanted.

If the speaker still sounds too quiet, perhaps it was damaged. To check its condition, use the test that is located in a special engineering menu. This menu is hidden from ordinary users, so you can enter it in two ways:

In any case, a gray screen with five buttons will appear in front of you:

We are interested in the section “Single item test”. As the name implies, in this paragraph you can test any specific option. We go to this section and look for the “Receiver” button, which indicates the main speaker. After pressing the button, the phone will lose the test melody, after which it will become clear to you whether the speaker works or it sounds too quiet.

To check the state of conversational dynamics, press the Speaker button

Once the engineering menu made it possible to manually adjust the volume values, but on new firmware (starting with MIUI 9.2) you can only test the state of the speaker, and understand whether it works normally, or the sound is reduced due to some technical or operating reasons.

It is curious that sometimes on the flagship devices the volume of the speaker can be reduced due to restrictions on the legislation.

The fact is that some European countries strictly control the permissible level of noise produced. Thus, Xiaomi cannot sell its smartphones on the territory of these countries if the sound of the speaker is too strong.

However, getting around this strange restriction can be very simple:

Check the volume: if it has risen, then change the time zone and use the phone as usual.

In smartphones that have the function of unlocking the face, the shift of the region may not affect the volume increase.

Quiet spoken speaker

As for the conversational dynamics, then, if you do not hear the interlocutor, first you need:

• check that during the conversation the volume sliders is raised to the maximum level;
• Make sure that the speaker is not broken and functions normally (using the engineering menu, which was described above).

If these actions have not led to anything, then you can try to make changes to the system files.

This operation requires a ROOT access, as well as confidence in your knowledge and skills.

Number 11 replace with 16, then save the file and restart the smartphone. The volume of the speaker will increase.

How to set up headphones on Android?

Computer sets: how to install a headset as an audio device by default

• Press the start, and then press the control panel.
• Click sounds and audio devices
• Click the audio tab.
• In the section “Sound playback” and “Sound recording”, select the headset as a default device from the revealing lists.
• Press the OK button to save changes.

How to change the settings of headphones on my samsung?

How to configure the sound balance of headphones in Samsung smartphones?

• 1 Put your finger up to open the application screen, or click “Applications”.
• 2 Touch “Settings”.
• 3 Scroll down and tape the availability.
• 4 Touch hearing (or hearing improvements).
• 5 Now adjust the sound balance accordingly.

Use the volume limit on Android devices

Android devices do not have built.in volume control options, but you can download special applications in the Google Play Store, which will limit the maximum volume. Try to enter into the search line “volume limiters for children” and the site will give you the programs of interest. Some applications have an option of parental control, while others do not.

If your children conquer the Internet using the Chrome browser, you can set the volume level of videos and musical compositions that they listen to. To do this, you can create a “controlled profile”. information about this function can be found in the Chrome certificate.

Find out if your TV supports parental control

If you have acquired a modern TV, you can try to search for parental control options in the settings. If there are no such options in the TV menu, look at the user guide to this model.

Despite the fact that the headphones are the most popular, monitor headphones are safer. Monitor headphones are located further from the eardrum and more comfortable for small ears.

How to disable the automatic volume level to Android safety level

On Android, depending on your system version, you can have a built.in function of a safe volume of headphones. How it works? He simply continues to imitate our music from time to time, listening to the headphones by about half the volume to protect our ears. How to disable it?

If we do not like it when someone else decides us, how we should use the phone, this is certainly annoying us. In some versions of the system, especially unofficial (Cyanogenmod), to disable the option of a safe volume of headphones is incredibly simple. However, if we have such a function included in the official software, and it is impossible to turn it off, you should use a special application that overwrites the volume settings.

Disconnect the protected volume using the settings

The first method, of course, works on CyanogenMod mods, but it does not need to be checked at the official releases of Android, in which we find the function of decreasing volume. Go to the “Settings” application and select “Sound”.

In the sound settings on the “Volume” tab, select the setting with the same name. Android will now show us all the sliders associated with the volume of sound on Android.

Under the volume strip you will find the option “Safe volume of music”. Of course, this option is selected by default, so it should be disconnected.

When the message is displayed, ignore it and turn off the protected volume, despite the warning. And he is ready. the system will not automatically turn off music during listening in headphones.

Use the “auditory apparatus” application.

The hearing aid is an application, whose task is paradoxical in our case. hearing protection. The application allows you to install two different sound levels (for speakers and headphones) and automatically switch between them, depending on whether the headphones are connected or disconnected.

How this application will help us with the problem of automatic reduction in volume? The program, obviously, takes control of the volume control and prevents the built.in automatic compression function. All you need to do is set the maximum volume level for both headphones and a loudspeaker, and he is ready.

Using the application is very simple. After its launch, we are convinced that we are on the Media tab (we are responsible for listening to music), and not in Ringer (he is responsible for the volume of the call). We choose Media and use two sliders below.

The first is responsible for the fact that the volume will be set after connecting the headphones, the second controls the volume that will be activated automatically when they are disconnected. We set the same value in both cases and touch the Enable button.

The auditory safe is now activated and controls automatic volume. Program operation and elimination of automatic sound shutdown are confirmed by several users of the LG G2 smartphone, which has a muffled problem.

To turn off the warning, you can do the following:

Set the Audio value.Safemedia.Bypass = True in the System/Build file.Properties

You need to monitor the value of settings.Secure.UNSAFE_VOLUME_MUSIC_ACTIVE_MS. and do not let him rise above 72,000,000 (20 hours). After resetting the value, you need to restart the device (or switch to another user, and then come back).

I wrote a simple application code that does this work, and reminds of the need to restart the device/shift.

Update

Device manufacturers can make changes to the platform code, and, judging by the Комментарии и мнения владельцев, some of them soften default behavior. For example, a warning may appear once, and no longer occur before the next reboot.

Turning instructions

The main tool in the fight against Wakelock’s source programs is the BetterbattyStats application, which, although paid, is worth every penny spent on it. Additional information and subtleties of working with the application can be found on our forum.

In order for the program to work without a Root-right, we will need to give it some system permissions manually. To do this, you will have to install ADB (Android Debug Bridge)-a utility for interacting with Android devices. It can be downloaded as part of the Platform Tools package from the official Android website.

Preparation of ADB. Remove the Platform Tools into any folder on the computer and go to it in the conductor. After that, open the Windows command line. To do this, click with the right mouse button on an empty place in the conductor window with a clamping shift key and select “Open the command window”. To start the console program from the Windows command line, it is enough to enter its name (in our case, ADB). If you use the PowerShell command membrane, you need to indicate a relative path to start the application, for example.Adb.

Connecting a smartphone to PC via ADB. To control the smartphone from the computer, you need to allow the ADB operation at the gadget itself. In the settings of the device, find the item “On the device”, inside which tape the “assembly number” point seven times.

A new section “For Developers” will appear on the main settings screen, in which you need to find and activate the “USB debugging” item.

To check the work of ADB in the console, enter the command

If everything is done correctly, in the list that appears you will see your device.

Immediately after entering the command, a pop.up window will appear on the smartphone, in which it is necessary to put a check “always allow debugging from this computer”, and then press the OK button.

Providing system permits. Now is the time to give the BetterbattyStats application system resolution for access to the battery. This is done by just one team that must be entered into the console:

Adb.D Shell Pm Grant com.Asksven.Betterbattystats Android.permission.Battle_stats

In the event that you installed BetterbattyStats from the XDA Developers forum, the team will be slightly changed:

Adb.D Shell Pm Grant com.Asksven.Betterbattystats_xDaedition Android.permission.Battle_stats

If everything went right, you will not see the conclusion of the team in the console (the cursor will simply move to the next line), and the inscription “There is no access to the wakels of the nucleus” when choosing the Kernel Wakelock category will disappear.

When a shutdown can harm

In fairness, we note that over many years of working on the Wakelock Google mechanism, Android was taught to take care of the battery, so the main goal for us will be partial Wakelock, caused by third.party. It is they who maliciously devour the battery charge, especially with a large number of installed programs.

It is important to understand that it is partial “alarm clocks” (PWL) that are often caused by Wakelock’s nuclei. Therefore, a thoughtless shutdown of the nuclear wagklacks, instead of the fight against partial sources, will not only not improve the autonomy of the smartphone, but can also cause a quick battery discharge. A good example: Wi-Fi disconnecting with a large number of Wakelock’s called Wlan_rx_wake will force applications that request data transmission, do it through a cellular network. Even in the absence of a connection with her, this will cause more frequent waking up the gadget. and, as a result, more energy consumption.

However, with the disconnection of “alarms” from ordinary applications, it is worth being attentive. If we are talking about a messenger or other similar program, you risk not getting an important message or notification. When performing this instruction, it is worth finding out and understand exactly what consequences will cause certain actions.

We make louder through the engineering menu.

An experienced, professional user or specialist can correctly configure the sound through the engineering menu. To do this, you do not need to install any additional applications for the adjustment of sound to the gadget.

You can go to the engineering menu either through the MTK Engineering Mode program (if you have a smartphone based on the MediaTek processor), or through a special code from the manufacturer. For different companies, codes may differ. You need to enter the code through the call menu, this is no more difficult to check the balance.

In the engineering menu you need to go to the hardware testing section. Hardware Testing. And from there already open the sound page. Audio.

In the menu that opens, you can install your parameter for each option of using sound devices. So, for example, you can make differences between the sound stream through the speakers when listening to music or when calling. Separately, you can configure the parameters for the headset. And so on. Everything is very clear there. But you need to navigate in the indicators. So this is not for beginners in the most part.

We remove the restriction of the volume.

If the user is faced with the volume limit from the Android system or from the device, then this is not a sentence. You can fight this.

You can call for the help of the Volume Boost application. You need to download, install and run it. At the moment when an application auto launcher in the background. Auto Start. is available. mark it with a tick. And that’s it. The volume will be automatically as you ask it. Want to maximize, then ask maximum.

Operating with sound volume indicators on Android devices is not difficult for the most part. But still do not bend with maximum indicators. It is not for nothing that the creators of both gadgets and software codes warn about this.

Tricks to enhance sound on Android

The external speaker solves the problem of insufficient volume of the smartphone or tablet, when other methods do not help. The speaker. a small device with a plug of 3.5 mm. is inserted into the headphone jack or connected via Bluetooth. Cost. from 700 r.

Life hack to increase the volume. while playing a video or playing music, arrange a smartphone with a dynamic towards a painted wall. The sound will be reflected from the surface, simultaneously intensifying.

Is it possible to remove the restriction of the volume

On smartphones under the control of Android, the maximum volume limit is valid for protecting the speakers of devices and eardrum of users. Increasing the upper boundary allows the engineering menu. Max item. Vol. The maximum value is 255 units. It is impossible to set a value above, and it is not required. otherwise the speakers will not withstand.

If you do not want to contact the service menu, use the Volume Unlock application:

The program does not remove the limitation, but increases the maximum value.

Test the methods of increasing volume described above and select the optimal for your device. Gently work with an engineering menu. incorrect tuning can lead to disorders of the sound of a smartphone or tablet.