JVC radio connector for connecting. Honey & tar

31.03.2023 Talmaran Gadgets

JVC radio connection diagram

But in this case, the radio will constantly consume current, and with a long simple car from several days to weeks, you may have a battery. To summarize the connection of the JVC radio tape recorder is not difficult, the main thing is to carry out all the operations neatly and according to the scheme available with the device. For safe operation of the radio, JVC, it must be connected by a multi.core copper wire with a cross section of at least 4 mm and installed on it by the fuse in A. The standard connection diagram of the car radio is the main stage of the connection of the car radio is the power connection. Independent installation of “music” in a car. We put an inexpensive set of auto.sound. Replacing a stationary radio in most people has a desire to replace a stationary radio with a built.in.

With the first point, everything is about everything is clear. What can I encounter with an incorrect connection of a car radio? You have 10 wires left. As can be seen from the scheme, the left side of the ISO connector is responsible for the power supply and control of the radio, and the right is the right to connect the speakers to it. When the installation of basic parameters is completed, you can proceed to operation. How to connect a radio.

User’s manual

It should also be noted that to install a radio tape recorder of various types, you will have to purchase the corresponding boxes. Initially, there was an attempt to collect everything according to this scheme. The main rule when replacing stationary radio with built.in are the correct selection of adapters and related connectors. In fact, there is nothing terrible here, and in this article we will figure out how to connect a radio in the machine.

Most cars produced in recent years are equipped with a special connector for cm. User Management Instructions for JVC car radios contains warnings: do not use options that distract from safe traffic on the road. The time on the jvc radio and the date can be set when it is necessary after the basic settings. User Management Instructions for JVC car radios contains warnings: do not use options that distract from safe traffic on the road. Features of the installation of a car radio by the installation method of modern car radios are two types: built.in and stationary. When connecting the radio, all sources of electricity should be turned off, and if it is impossible for each wire to be carefully cleaned, you can see and isolate the connection example in the photo below. Connect the AUX to the radio tape recorder JVC KD-G511

Wrap.cutting connectors of the car radios JVC: Consider in detail

The drainage of the JVC car radio connectors will be required by all those users who intend to carry out the installation of the apparatus independent forces. During the installation process, the scheme of the Automatic Automobiles JVC are very important, according to which the connection is carried out.

Automobiles JVC

As a rule, today no problems with the acquisition of a car radio are observed. Everyone will be able to choose their favorite model, in accordance with their individual needs.In this regard, JVC, which annually updates the line of its products, releasing new and attractive apparatus, is especially good in this regard.

Note. So, JVC/Kenwood recently submitted 4 new non.discovers created for active mobile phone users for display of customers. Elegant design, complete integration with smartphones, corporate sound, wide possibilities. these are not the only advantages of these devices.

The installation of new receivers is carried out in a standard place for the automaker’s place 1 Dean. There are 2-day devices, large in size. In both cases, the connectors cannot be dispensed with the right handout.

Features of installation and connection

JVC takes care of its consumers. The models they have manufactured by the car radio are made so that the user himself can install them.For example, the manufacturer took care of equipping his devices with a special hairpin to fix the back of the device and decorative gasket. Thus, the car radio is much easier to remove using standard hooks.

Note. Of course, models of car radios with ordinary screw fixation are also produced. They are even more reliable in some way, but do not forget that screwing the screws to a depth of not more than 6 mm.

But, again, the main thing when connecting devices in a car, these are connectors. Most cars produced in recent years are equipped with a special connector (see.What are the connectors).It is called ISO. this is a universal connector, the connection with which it comes down only to the connection of the plug. The case of some few minutes that even a schoolboy will deal with, but subject to a clear follow of the instruction.

Note. Unfortunately, such a connector appeared relatively recently. But on the early modifications of BMW, Nissan, Honda and others, there is no such connector. In this case, the connection can cause some problems if you do not know the features of the process and the drainage of the Automobile Automobiles JVC.

Standard drainage of JVC connectors of devices

As a rule, most models of the JVC car radio must be connected according to the following scheme:

KP extend from the battery. This is a 12V food;
SP responsible for the power antenna;
PM to carry out through ZZ;
The emergency responsible for the mass is easiest to transfer to the body in the most convenient place for this;
FP is a plus on the rear speaker right;
ZP is a plus on the rear speaker left;
SRP is a minus on the rear speaker right;
PSU is a minus on the rear speaker left.

KP. red; joint venture. blue; gp. yellow; emergency. black; fp. purple; zp. green; CPP. gray; PSA. white; zz. ignition lock.

Note. You should know that on JVC car radios, minus wires are painted not only in the main color, but also have a black strip. As for the GP and KP, they are often connected together. This allows you to achieve the opportunity to listen to music without the ignition key. In addition, this technique significantly affects the improvement of sound quality.

A similar scenario can be achieved if the wires are not connected to each other, but only rearrange the fuse.In particular, you can do as follows:

The fuse located at the end of the JVC apparatus is rearranged in the next nest;
To connect only the KP to the battery;
ZhP is just to be insulated.

Advice. To achieve normal playback and pure sound without distortion, you need to pay considerable attention to wires and their quality. Thicker cables are ideal for power, and more reliable connectors are for communication with speakers. The wiring that comes with devices, as a rule, is not the best quality.

In the process of carrying out operations with your own hands, there will be no superfluous viewing of the video and photo. Step.by.step instructions will also be welcome. JVC car radios are very popular today and the price is affordable.

Gu or generator

Pioneer Mosfet 50wx4 Generator in any automobile power circuit performs dominant functions. The normal functioning and operation of the machine depends on it. Reliable GU is installed in all foreign cars and models of the domestic auto industry.

For example, a GU is put on a “six” whose charge is satisfied with the need for electricity of any full.time component. If you do not overload the generating device of the “six”, then the car is able to leave many more and many kilometers

However, it is important to carry out preventive procedures in a timely manner. to monitor the tension of the belt and the condition of the brushes

Gu is connected according to the classical scheme. On the example of the VAZ 2106 generator, consider its functioning. This is marked with G-221. Represents a synchronous electromashine of alternating voltage with ELMG excitement. Inside, the VB (rectifier) with the 6th diodes is built inside.

one	The winding of the generator rotor
2	generator
3	Generator stator winding
four	The rectifier of the generator
5	accumulator battery
6	Lighting switch
7	Control battery charge lamp
eight	relay of a control lamp of the battery charge
9	VAZ fuse block.2106
ten	throttle
eleven	Thermal compensating resistor
12	Additional resistors
13	voltage regulator

A simple and understandable scheme that does not require any subtleties and specific knowledge. On the “six” GU is located on the motor on the right. It is attached to the stretch bar with a nut and to the bracket with its paws.

As you can see, the diagram shows a remote regulator. It is marked with number 13. The generator is indicated under the number 2, the fuse block is under the number 9.

Separately, I would like to consider the relay that in the scheme of the “Six generator” plays an important role. First of all, it serves in order to submit information to the driver about the state of charging. It is known to create a generating device.

The relay is made according to the same principle, like all devices that function, according to the same properties. Connection is carried out to terminal 30 generator. A separate wire goes through fuses to the ZZ (lock).

The action of the relay comes down to the following: as soon as the BS voltage is reduced (drops below 12-volt value), relay contacts open, the indicator will be involved, giving a sign to the driver.

For a better understanding of the connection scheme, it is recommended to familiarize yourself with the principles of battery charging:

As soon as the key in the ZZ is turning, an electromaster is supplied to the relay regulator through the fuse (output 15);
In the regulator, the voltage is transformed and goes further to the positive brush of the GU;
Then, through the brush, the voltage goes to the winding of the excitation of the GU;
then. on a negative brush through which the mass is displayed.

After the relay is involved or after reaching the BS of the normal value of Voltage, the gu begins to produce current with the desired value. The indicator lamp goes out, and the circuit begins to work in factory mode. But when the general voltage falls, the current is not enough, and the contacts open, which leads to burning the discharge lamp.

The constant inclusion of the charge indicator lamp indicates the incorrect operation of the gene. This happens for various reasons. First you should check the fuses: if they are in an active state, then both relays deserve attention: a regulator and a charger. If they are in order, then the malfunctions must be sought in the most generating device.

Before starting to replace the relay, it is recommended to carefully check the functioning of the regulator. The car is launched, the revolutions are held in the range of 2500-3000 rpm. After that, you need to turn off all current consumers, except for ignition. Then you need to measure the voltage at the accounts of the battery.

Charging may disappear in the following cases:

If worn out generator brushes.
In case of malfunctions of the generating device.
If faulty relay charging.
When failing of the rectifier block (diode bridge).

Thus, the installation of a remote relay regulator in return for the built-in will bring a lot of benefits. The fact is that modern chargers have much more power. Thus, modern ZU and much more complicated than the systems of the old sample.

Absolutely legal (article 12.2);
Hides from photo-formation;
Suitable for all cars;
Works through the cigarette lighter connector;
Does not interfere in the radio and cell phones.

JVC radio connectors. 404 products.404 goods

The terminal connectors are made of the highest quality plastic GSXL cable provides excellent flexibility in combination with excellent cash per conductivity of the signal connection PLUG Play without the need to cut wires, it makes the installation process quickly and convenient

Connectors for car radios “euro” ISO 2 nests Acousticity are designed to connect the car radio to the electrical wiring. The product is a special block of the standardized euro format “ISO” with wires. Consists of two detachable h.

Connectors for car radios “euro” ISO dual plug Acousticrapy are designed to connect the car radio to the electrical wiring. The product is a special block of a standard of the standardized Euro ISO format with wires and is connected to the.

Connectors for car radios “euro” ISO Doded nest Acousticrapy are designed to connect the car radio to the electrical wiring. The product is a special block, a nest of a standardized Euro ISO format with wires. Consists of two not.

Incar ‘Conken01w The standard ISO-2 connector for the Kenwood car radio, JVC

ISO adapter ASH-019 orbit allows you to quickly and conveniently connect Kenwood radio, JVC in a car with ISO euro connectors. With it you can connect the standard car connectors and a radio without interfering in the car wiring. ASH-019 adapter: ISO (dad). 16-P.

ACV AD12-1545-ISO, Kenwood connector.5303182. ACV ISO-connectors are special adapters that are designed to solve the problem of connecting a car radio to the on-board network of a car. They are equipped with black plastic connector for connecting to the main p.

Adapter from the ISO-sharing to the full-time for cars

ISO adapter for connecting a radio tape recorder with a European ISO unit to Daewoo / Ssangyong cars

The Intro Con-Ken-01 connector is designed to connect a car radio into a standard vehicle network. The wire provides a safe connection without intervention in the wiring, suitable for many models of the radio tape recorder Kenwood

The Intro ISO-002 Connector will be easy to hide behind the front panel, so the wires will not catch your eye. The connector is characterized by versatility. you can use it for any car brand and radio

The connector for connecting the LG car radio (Goldstar) to the power and audio system of the car

ISO-adapter, which allows you to quickly and conveniently connect a new CD/MP3 receiver or multimedia station instead of a standard head device in Chevrolet 06 cars. In this case, it is not necessary to cut the wires, since on the one hand the ISO-adapter is equipped with a connector p.

This device, which allows, without any intervention, connect the car radio with the ISO connector into the standard wiring of your car, while you can continue to use the standard USB, AUX entrances, and also adjust the brightness of the screen backlight. This one is additional.

Chrysler 300M 2002-2008 Chrysler Grand Voyager RG 2002-2008 Chrysler PT Cruiser (PG) 09/2001 Chrysler Voyager 2002 Jeep Grand Charokee 2002-2008 Jeep Wrangler/. 2005)

This device, which allows, without any intervention, connect the car radio with the ISO connector into the standard wiring of your car, while you can continue to use the standard USB, AUX entrances, and also adjust the brightness of the screen backlight. This one is additional.

ISO adapter for connecting a radio tape recorder with a European ISO unit to Toyota and Lexus cars. The radio is connected by the Plugplay algorithm. Disconnect the old head device and connect the new to the same connector, the necessary condition. The presence of software.

Connectors for car radios “euro” ISO Doded socket Acoustics are used to connect the car radio to the electrical wiring. Are a special block of the standardized “Euro ISO” format with wires and included in the car connector.

ISO adapter for connecting a radio tape recorder with a European ISO unit to cars

Designed to connect the car radio to the electrical wiring of the car. The product is a special block of the standardized format with wires and the car radio inserted into the connector. Consists of two detachable parts, the first is connected.

The main connector for the radio and ISO-adapter

JVC radio connectors

Connector for the Euro ISO car radio, 2 REXANT nests

Connector for the Euro ISO car radio, dual nest Rexant

Slot ISO-1, Incar Con-Son-01W car circulation connector

Sony CD- car radio connector; CDX-; MD-; MDX-; Mex-; WX-; XR-; XT-; XAV-Series / JVC KD-; Ks-; KW-Series 16-PIN (30x12mm) (Carav 15-109)

Connector for the Euro ISO car radio, dual dodger rexant

Adapter ISO Incar ISO 002 0.3m (Incar ISO 002)

ISO adapter ASH-019 orbit allows you to quickly and conveniently connect Kenwood radio, JVC in a car with ISO euro connectors. With it you can connect the standard car connectors and a radio without interfering in the car wiring. ASH-019 adapter: ISO (dad). 16-P.

Adapter for ASH-019 JVC orbit connector ISO

Chrysler 300M 2002-2008 Chrysler Grand Voyager RG 2002-2008 Chrysler PT Cruiser (PG) 09/2001 Chrysler Voyager 2002 Jeep Grand Charokee 2002-2008 Jeep Wrangler/. 2005)

ISO connector for radio tape recorders JVC, Sony (2012) 16 PIN to ISO, AURA AWU-JV02

ISO connector for radio tape recorders JVC, Sony (-2012) 16 PIN to ISO, AURA AWU-JV01

ACV AD12-1545-ISO, Kenwood connector.5303182. ACV ISO-connectors are special adapters that are designed to solve the problem of connecting a car radio to the on-board network of a car. They are equipped with black plastic connector for connecting to the main p.

The Intro Con-Ken-01 connector is designed to connect a car radio into a standard vehicle network. The wire provides a safe connection without intervention in the wiring, suitable for many models of the radio tape recorder Kenwood

This device, which allows, without any intervention, connect the car radio with the ISO connector into the standard wiring of your car, while you can continue to use the standard USB, AUX entrances, and also adjust the brightness of the screen backlight. This one is additional.

ISO adapter Chevrolet Intro ISO CHE-06

Connector for connecting the Carav 15-011: OEM: Audiovox. AEG. Clatronic. Foryou. Mystery. Prology. Elenberg (Select Models) 14-Pin connector (Female) Carav power Acoustics Sencts-Terminals made of higher-quality plastic GSXL cable about.

Audiovox / Aeg / Clatronic / Foryou / Mystery / Prology / Elenberg 14-Pin Carav 15-011 car

Designed to connect the car radio to the electrical wiring of the car. The product is a special block of the standardized format with wires and the car radio inserted into the connector. Consists of two detachable parts, the first is connected.

Connectors for car radios euro ISO 2 nests Acoustics Power 16-0501.

User’s manual

JVC car radio instructions contains warnings:

Do not use options that distract from safe traffic on the road. The main thing in automobile driving is compliance with traffic rules.
Before you start playback, it is better to reduce the volume so that the speakers are not damaged due to sharp sound changes.
The volume of the sound of the radio should not jerk sounds outside the window so that the driver can hear what is happening around.
It is not recommended to use devices that distract from driving or somehow affect the safety of movement. The car radio should not distract the driver’s attention from the movement.
With the formation of condensate on the disk, a reading error may occur. In this case, the disk must be extracted and dried.
The saved data must be copied to avoid their loss.
It is not recommended to insert metal objects into the device so that there is no close.
It is not recommended to leave the remote control panel on the dashboard from the radio.
Lithium batteries are recommended to be changed only to original ones, as they can explode.
Batteries must be stored in an inaccessible place for children and not exposed to heating in the sun or fire.

The main mechanisms and regulators on the front panel of the radio tape recorder JVC:

In the left lower or other corner there may be a disconnect button for the radio panel.
Round handle. volume control. On some models, the volume is regulated by the buttons with the designations “” and “-“.
Display. Shows the state of the radio, the name of the tracks, albums, other information.

The power is disconnected by the button with the inclusion icon or source. To do this, click and hold it. Volume adjustment occurs using VOL buttons and “Vol.””. The rest of the operation is the same as that of any audio equipment. Button with a triangle. playback; With two triangles forward and backward. “next track” or “next album”.

You can switch to the previous track and album.

The square button stops playback.

Each model of the JVC radio has its own manual. And although the general principles of using the radio, each model has features and additional opportunities that it is better to familiarize yourself with the instructions for this model.

What Do I Do with My Unused Car Stereo Wires? | Car Audio Q & A

How to set up a radio

When you first turn on, you need to configure the jvc radio. As soon as the device is turned on, it is necessary to drop the demonstration.When displaying the information “Cancel Demo”. “Press”. “Volume Knob”, you need to do the following actions:

In addition, you need to configure the radio, setting the basic parameters. The adjustment of the car radio on the basic parameters is carried out as follows:

Click and hold the button with the squares, above which the gear is drawn;
The desired element is selected by turning the volume control (or arrows in the case of a button version);
To choose an active element, you need to press the volume control handle;
Then, for exit, press the button with squares and gear over it again.

The car radio can be configured for any parameters. It is enough to choose the right value. The list of basic parameters will tell the instructions designed for the desired model. When the installation of basic parameters is completed, you can proceed to operation. In the same way we set up not only basic parameters, but also any others, if necessary.

Time setup

Setting up a car radio involves setting a date and time. To complete these tasks you need:

Press and hold the button with squares and gear.
Select CLOCK by turning the volume control, then by pressing when this menu item will be active.
Turning the volume controller, we find the Clock Adjust settings point and click the controller for entering the menu item.
Turn the clock with turning the clock and minutes to the desired values and press the regulator handle when the right value is selected.
Now you need to choose the format. turn the volume handle to the point Clock Format and click it.
By turning, select a 12 or 24-hour format and press the volume handle.
To install the date, turn the controller to the Date Set menu item.
Select the values of the date by turning the volume control, then by pressing when the necessary values are achieved.
Come out by pressing the button with a square and a gear.

The time on the jvc radio and the date can be set when it is necessary after the basic settings. For example, when traveling by car to other regions of the country.

What are the radio tape recorders?

Among the whole variety of car radios, there are only two types of devices that differ in forms among themselves.

JVC KD-R740BT Car Stereo | iPod, iPhone & Android Ready w/ Bluetooth

In the CIS and European countries, single.block or 1 DIN are more common, and for America, Japan and Korea two.block or 2 din.

It should also be noted that to install a radio tape recorder of various types, you will have to purchase the corresponding boxes.

Important! Carefully study the panel of your car, because it may turn out that only a device of a certain type can enter it.

Adapter for connection

According to European standards, all wires connected to the car radio must correspond to one ISO marking. But at the same time, many manufacturers produce various plugs and radio tape recorders of JVC. Therefore, when buying a car radio, you need to verify the presence of an ISO adapter, and in the absence of it, they will definitely have to acquire.

Modern cars of cars are equipped with adapters for the European standard, but most have no them, so the radio will have to be connected directly to the wiring.

User’s manual

JVC car radio instructions contains warnings:

Do not use options that distract from safe traffic on the road. The main thing in automobile driving is compliance with traffic rules.
Before you start playback, it is better to reduce the volume so that the speakers are not damaged due to sharp sound changes.
The volume of the sound of the radio should not jerk sounds outside the window so that the driver can hear what is happening around.
It is not recommended to use devices that distract from driving or somehow affect the safety of movement. The car radio should not distract the driver’s attention from the movement.
With the formation of condensate on the disk, a reading error may occur. In this case, the disk must be extracted and dried.
The saved data must be copied to avoid their loss.
It is not recommended to insert metal objects into the device so that there is no close.
It is not recommended to leave the remote control panel on the dashboard from the radio.
Lithium batteries are recommended to be changed only to original ones, as they can explode.
Batteries must be stored in an inaccessible place for children and not exposed to heating in the sun or fire.

The main mechanisms and regulators on the front panel of the radio tape recorder JVC:

In the left lower or other corner there may be a disconnect button for the radio panel.
Round handle. volume control. On some models, the volume is regulated by the buttons with the designations “” and “-“.
Display. Shows the state of the radio, the name of the tracks, albums, other information.

You can switch to the previous track and album.

The square button stops playback.

Each model of the JVC radio has its own manual. And although the general principles of using the radio, each model has features and additional opportunities that it is better to familiarize yourself with the instructions for this model.

How to set up a radio

In addition, you need to configure the radio, setting the basic parameters. The adjustment of the car radio on the basic parameters is carried out as follows:

Click and hold the button with the squares, above which the gear is drawn;
The desired element is selected by turning the volume control (or arrows in the case of a button version);
To choose an active element, you need to press the volume control handle;
Then, for exit, press the button with squares and gear over it again.

Time setup

Setting up a car radio involves setting a date and time. To complete these tasks you need:

Press and hold the button with squares and gear.
Select CLOCK by turning the volume control, then by pressing when this menu item will be active.
Turning the volume controller, we find the Clock Adjust settings point and click the controller for entering the menu item.
Turn the clock with turning the clock and minutes to the desired values and press the regulator handle when the right value is selected.
Now you need to choose the format. turn the volume handle to the point Clock Format and click it.
By turning, select a 12 or 24-hour format and press the volume handle.
To install the date, turn the controller to the Date Set menu item.
Select the values of the date by turning the volume control, then by pressing when the necessary values are achieved.
Come out by pressing the button with a square and a gear.

The time on the jvc radio and the date can be set when it is necessary after the basic settings. For example, when traveling by car to other regions of the country.

How to find a malfunction

A car radio, like other equipment, over time can fail and have various malfunctions. To understand how to find a malfunction in JVC RC and other radio, you need to know that there may be several main reasons:

Pollution and mechanical damage to the radio. Over time, dust and dirt accumulate in the mechanisms, which can lead to problems.
Voltage drops can cause a malfunction in electrical circuits.

High.quality repair of the car radio can only be done by a professional. Mechanical malfunctions can be eliminated independently by cleaning the radio. But if there have never been such skills, then it is better to seek help from a professional.

If it does not turn on

When the radio does not turn on, the reason may be hidden in the absence of nutrition. It is worth checking the CN701 contact, on which there should be a voltage of 14 V.

In the absence of voltage, transistors or zener diode are replaced.

Another reason when the inclusion does not occur can be the absence of a power signal.

If the buttons do not work

Buttons can break with mechanical damage or simply clog with dirt or dust. In the second case, the cleansing of the radio will help. When crashing buttons, perhaps new buttons will have to be searched on motorist forums, in services, when buying old equipment from hand. It will be easier to replace the panel, but it all depends on the situation and model of the radio.

Many sellers have long abandoned the replacement of parts and, when damaged, some details offer to replace the entire mechanism or purchase a new device. Specialized repair workshops can help out, who buy old equipment for spare parts and with their help perform repairs. The main thing is that the cost of such a repair is not close to the cost of a new device.

Sources:

https://tokzamer.ru/bez-rubriki/shema-podkljucheniya-magnitoly-jvc
https://audiojob.ru/usilitel/raspinovka-razema-magnitoly-jvc.html
https://40nog.ru/razemy-dlya-magnitoly-jvc
https://msk.compumir.ru/razemy-dlja-magnitoly-jvc
https://antiege.ru/raspinovka/razema-magnitoly-jvc.html
https://autotuning.expert/magnitola/raspinovka-jvc.html