iPhone turns on until apple and turns off

Fix iPhone Keeps Showing Apple Logo and then Turning off (iOS 14 and iPhone 12 Supported)

iPhone turns on before logo

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

The most common reasons that the iPhone does not turn on. the apple burns and goes out, are mechanical damage and software malfunctions. After heavy drops or moisture gets inside the smartphone, the display may stop working, due to which the touchscreen partially or completely stops responding. The apple often lights up, but the iPhone does not turn on, because there are problems with the hardware stuffing of the equipment.

For any problem, solutions can be found to quickly eliminate the cause of the problem. Breakdowns that are not related to damage or wear of internal elements are easily diagnosed and repaired on their own. In other cases, it is advisable to seek help from qualified specialists.

What to do if the device does not boot

If you press the buttons, you see a black screen or the Apple logo glows and your device won’t boot, you need to follow the steps to find the cause of the problem. Disassembling an iPhone without professional tools is not worth it, as there is a risk of damaging the power button or power controller.

To independently identify the cause of the malfunction, you need to perform the following actions:

  • inspect the iPhone case and screen for chips, scratches and other damage (most often the iPhone turns on before the apple and turns off after a fall, because the internal elements were damaged)
  • check the battery charge (if the battery is not fully charged, the phone will not start, so you should connect the iPhone to the network and wait 20 minutes)
  • make a complex reboot (the power button and the “Home” button are simultaneously clamped)

When charging, the device may also not respond for a long time to pressing the power button, because the power adapter is faulty. Connect the iPhone to the laptop and, after waiting for a while, try to boot the smartphone again.

  • use non-original accessories (they may give an insufficient number of amperes, which will cause malfunctions)
  • install unverified applications and software
  • charge your phone in case of strong voltage fluctuations

If the iPhone does not turn on after the fall, the apple burns and goes out, and there is damage to the case or screen itself, then mechanical and software diagnostics of the smartphone is required, followed by the replacement of the display module.

The main causes of breakdowns

When the apple is on when turned on, but the system does not start, you can independently perform the initial diagnostics and find the cause of the malfunction.

Most often, iPhone won’t boot due to the following factors:

  • malfunction of the “Power” button, power controller, display module and other internal elements (such problems occur when the iPhone is dropped)
  • incomplete battery charge (the device does not turn on further than an apple if there is not enough power)
  • defective USB cable or power adapter
  • corrosion of internal elements after moisture gets inside the phone
  • overheating of the device

It is possible to find a solution to the problem, if the root cause of what the apple lights up and goes out are not hardware problems, you can without outside help.

How to Fix iPhone Keeps Restarting Again & Again Problem | Boot Loop FIX

The “symptoms” of a malfunction can be different, for example:

iphone, turns, apple
  • smartphone turns on for a long time
  • after full discharge does not charge
  • when turned on, the logo lights up, but the system freezes and does not start
  • the screen is black, the logo is off
  • at startup, the icon appears, the system boots completely, after which the screen shows the logo and goes out

If the smartphone did not fall, all the buttons worked properly, but the phone for some reason does not turn on even after charging, most likely, the battery has worn out. Such a malfunction can be prevented by routine diagnostics of the device.

Read more:  iPhone 7 or 7 what to choose

Reinstalling the system is a comprehensive solution to the problem

The appearance of a black screen with an apple primarily indicates a software malfunction. Breakdowns of this nature occur:

iphone, turns, apple
  • after installing unverified apps
  • after specifying incorrect parameters in the settings

To restore your iPhone yourself, you need to enter it into DFU mode. If all the steps are correct, the iPhone will automatically reinstall the system and then turn on.

To enter recovery mode, you need to do the following:

  • while holding down the button, turn off the smartphone completely (the Apple logo should not light up on the screen)
  • connect the USB cable to the computer and launch iTunes (at this stage, the iPhone itself does not need to be connected to the laptop)
  • simultaneously press the “Home” and “Power” buttons (after 10 seconds, release the button responsible for turning on, “Home” continue to hold down)
  • connect your smartphone to your laptop

After a few seconds, iTunes will detect the device, after which you must release the Home button and proceed to reinstall the system.

This method is also suitable if the phone takes a long time to load, often goes dead or programs hang from time to time. Try to restore the system by flashing, if the smartphone still does not start, then professional diagnostics are required.

Important! When you turn on the iPhone in DFU mode, the device will not start and the backlight will not work. Please note the following:

  • the logo will not light up
  • the screen must be completely black
  • only after the installation of the software is finished does an apple appear on the screen

It is recommended to use original USD cables and certified programs for flashing. Analogues do not always successfully cope with software updates, because iTunes may intermittently fail during device discovery.

How to fix hardware problems

If you have followed all the above steps, but the apple still does not light up when you turn it on, most likely, the smartphone has broken down due to wear of the internal elements, after falling or getting moisture inside the phone. It is not advisable to fix hardware problems on your own, since without knowing the technical features of the iPhone, you can disrupt the operation of the motherboard.

The apple is constantly on, but the device itself does not turn on, with such hardware problems:

  • the “Home” or “Power” button has broken
  • there were problems with the power circuit (during charging, there was a strong voltage surge, which led to the system freezing or a failure in the settings)
  • the battery has worn out (smartphones do not receive enough power, so they do not turn on)
  • there was a failure in the operation of the flash memory (any of the microcircuits can fail, therefore, it is possible to accurately determine the cause of the failure only after computer diagnostics)
  • the charging controller is broken

Also, when turned on, apples glow on the screens of smartphones, but the system does not boot if the motherboard is damaged. Without routine diagnostics, such a breakdown is difficult to detect in a timely manner, because at the initial stage the devices work, but after a while the phones turn off spontaneously, and apples burn on the screens when they start.

Only experienced craftsmen can accurately and efficiently eliminate such defects. Yuda’s professional qualifications allow you to quickly repair your iPhone and any malfunctions in accordance with the manufacturer’s recommendations.

  • complex mechanical and computer diagnostics
  • repair using original parts
  • home visit at a convenient time

By ordering repairs using the Yudu online platform, you will not waste time traveling to the service center. Experts at your home will determine why the iPhone does not turn on. the apple is on, and they will fix the malfunction inexpensively.

What to do if iPhone won’t turn on after jailbreak?

Turn off your smartphone.

Hold the volume up button on the side of your iPhone.

With the key pressed, try to start the mobile device.

An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.

It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.

If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways how to remove jailbreak from iPhone. in case of the “white apple” problem, it is recommended to flash the device.

Read more:  How to remove tabs on iPhone

Re-flashing. it just sounds scary, in fact, the procedure is quite simple:

Launch iTunes and connect the iPhone to PC with a cable.

Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on an iPhone in our article on DFU-Mode.

ITunes will notify you that iPhone has been detected in recovery mode.

Click on the “Restore iPhone” button.

iTunes will download and install the new firmware on the gadget itself. You just have to wait for the completion of the procedure.

Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.

iPhone won’t turn on: apple is on and off

Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.

The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “apple” burns on the screen for a long time, then the screen just goes out.

Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also eliminate the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?

How to get rid of the “white apple” if the iPhone is not jailbreakable?

If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white apple”.

You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.

Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.

Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result speaks of a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.

IPhone Freezes When Turning On: Possible Causes

Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.

Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!

However, if the iPhone turns on before the “apple” and turns off, this may be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple“:

    Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, you should not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.
Read more:  iPhone XR camera how many megapixels

The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:

From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.

The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.

If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.

But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware breakdown, which will require you to contact the service to fix it.

The apple lights up and the iPhone turns off. what to do

The apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.

The apple lights up and the iPhone turns off. what to do

Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.

Then release the Power button and continue to hold the Home button until iTunes detects the device in recovery mode (about 10 seconds).

In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.

In the window that opens, click “Next” and “I Agree”.

Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.

It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.

After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.

What to do if iTunes does not detect iPhone in DFU mode

There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from the old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.

Also, the problem may be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:

  • iTunes.
  • Apple Software Update.
  • Apple Mobile Device Support.
  • Bonjour.
  • Apple Application Support (32-bit).
  • Apple Application Support (64-bit).

An extensive guide on how to properly reinstall iTunes is available here.

If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts functioning normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:

But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.