iPhone runs out of power and won’t turn on when charged

What to do if your iPhone or iPad is dead and won’t turn on

Apple smartphones are characterized by high performance, functionality and a fairly powerful battery. For example, the iPhone X lasts more than 40 hours when listening to music, and more than two days on standby. But recently, more and more users have begun to notice that the iPhone quickly runs out of power and heats up when charging. Many people attribute this to the release of the new iOS 11 system, which consumes more power than its predecessors. You have to charge the gadget with the new operating system several times a day and additionally put it on a charge overnight.

Sometimes iPhone is completely discharged, does not turn on, and there is no charging icon on the screen. Causes of this may include:

The gadget is discharged and won’t turn on when charged

If the gadget is discharged and doesn’t turn on during the charging process, it means that the smartphone is deeply discharged, or there is a conflict at the iOS software level. To troubleshoot the problem, you need to do the following steps:

• Press and hold Power and Home button simultaneously for 10 seconds. Press and hold the Power and Volume Down buttons on iPhone 7.

Press the Power and Home keys simultaneously for 10 seconds

• After the Apple logo appears on the gadget display, release the buttons.
• Control the process of iOS complete booting.
• If the gadget does not start, you must activate and deactivate the silent mode on the phone.

The silent mode on iPhone is activated and disabled by a special button on the phone

If after these actions the result is not achieved, the cause of the problem should be sought in the power adapter or cable.

Ipads and iPhones lose charge much faster at low temperatures. If you try to charge your product after it has been out in the cold for a long time, especially in freezing weather, the power circuit may malfunction instantly. Therefore, when you enter a warm room before plugging the device into the socket, you need to warm it up within 20-30 minutes.

For iPhone repair services

The main thing is not to panic and do not try to disassemble the device. First, check if the charger works by connecting it to another smartphone. If the device is charging normally, then it is most likely time to replace the battery on the iPhone. This can only be done in a service shop, because the design of the Apple smartphone is not disassembled.

If the battery icon appears on the screen when you connect the charger, but the gadget does not charge and does not turn on, the reason may be the iOS hangs. This happens when the battery is deeply discharged. In order to eliminate the problem put the device on charging for 6-8 hours and then try to turn it on. If the phone starts up successfully, find out how long it keeps the battery charge.

Another way how to turn your iPhone on is to restore via DFU mode. To do this, you need to connect the phone to your computer, go to iTunes and click the “restore” button. In most cases this procedure will help to turn your device on.

If all the above methods have not helped, refer to the service center for diagnosis. Diagnostics is free of charge at rem-iPhone centers.

Causes

The most common causes of iPhone 7 not turning on after discharging include power circuit failure, microcontroller failure or software errors. Troubleshooting associated with internal parts and “iron” should be entrusted to professionals. Failure in the program can be eliminated independently.

My iPhone 7 is out of charge and won’t turn on

If the smartphone does not respond to power on when connected to the charger, there was a deep discharge or a problem at the operating system level. If the iPhone 7 is deeply discharged, you need to follow the steps below:

When the display shows the Apple logo, you need to release the keys;

Enable and disable silent mode if the smartphone does not boot up;

If iPhone 7 does not turn on after a frost, what should the user do:

Go into a warm room and leave the phone there for about 30 minutes;

After that you can connect the iPhone 7 to the mains.

Apple electronics do not work well at sub-zero temperatures. Being out in the cold for a long time may cause a complete discharge of the device.

Iphone 7 does not charge and does not turn on

Lack of charging is caused by several factors: a broken battery, a broken power/charging controller or a non-original cord or power adapter. First of all you need to check the cable. It should be free of kinks and broken continuity. Also make sure to use the original cable. If there is an additional charger, you should connect the iPhone 7 to it. If the phone started charging, the old cable is broken.

If changing the cord did not help, the problem is caused by the battery or controller. These parts are only replaced in the service.

Battery replacement prices:

Iphone is charging and not turning on

The main reason why the iPhone 7 does not turn on after charging is the battery. The problem may be caused by deep discharge, if iPhone 7 does not turn on after a long period of non-use. There are several ways to fix the error:

Raise the charge level to the lower threshold. To do this, you need to plug your iPhone 7 to the mains for 6-10 hours to restore the charge. Then you can try to turn on the smartphone.

If the previous method did not help, you need to change the charger and reconnect the phone to the mains.

Enter DFU mode. You need to charge the smartphone for 6-8 hours. Install iTunes on your computer and open the downloaded program. Take the iPhone 7 off the charger and connect it to the PC, holding the Power and Home buttons. You should then release the Power button and hold the “home” key for another 15 seconds. A notification should pop up on the screen, indicating that the smartphone is ready for recovery. Press “recovery” and wait for the process to complete. You can turn on iPhone 7.

Once the phone is turned on, you need to observe it. If the charge runs out quickly, you will need to change the battery. You should also check that you are using the original power cable. Non-Apple chargers may be designed for a different amperage, which negatively affects the iPhone 7.

Software failure

When the software fails, usually only the apple is lit, and the device itself does not respond to power on. Then you need to perform a forced reboot. To do this, hold Home and Power.

The reasons

The most common causes of iPhone XR not turning on after a discharge include a failure in the power supply circuit, microcontroller failure, or software errors. Troubles related to internal parts and hardware should be entrusted to professionals. You can fix the problem on your own.

The iPhone XR is out of charge, and it does not turn on

If the smartphone does not respond to power on when connected to the charger, there was a deep discharge or a problem at the operating system level. If iPhone XR is deeply discharged, you need to follow the steps below:

When the display shows the Apple logo, you need to release the keys;

Turn on and off silent mode if the smartphone does not boot up;

If the iPhone XR does not turn on after a frost, what should the user do:

Go into a warm room and leave the phone there for about 30 minutes;

After that you can connect the iPhone XR to the network.

Apple electronics do not work well in sub-zero temperatures. Prolonged exposure to frost can cause complete discharge of the device.

Iphone XR does not charge and does not turn on

Lack of charging caused by several factors: broken battery, broken power controller/charger or non-original cord or power adapter. The first thing to check is the cable. It should not have fractures and broken integrity. You should also make sure to use the original cable. If there is an auxiliary charger, you should connect your iPhone XR to it. If the phone starts charging, the old cable is broken.

If replacing the wire does not help, the failure is caused by the battery or the controller. These parts can be changed only in the service.

For battery replacement:

Iphone is charging and not turning on

The main reason why iPhone XR does not turn on after charging is the battery. The problem can be caused by deep discharge, if iPhone XR does not turn on after a long period of non-use. There are several ways to fix the error:

Raise the level of charge to the bottom threshold. You need to plug in the iPhone XR for 6-10 hours to recover the charge. Then you can try to turn your smartphone on.

If the previous method does not help, you need to change the charger and reconnect the phone to the mains.

Enter DFU mode. To do this you need to charge the smartphone for 6-8 hours. Install iTunes on your computer and open the downloaded program. Take the iPhone XR off the charger and connect it to the PC, holding down the Power and Home buttons. Then release the Power button and hold the Home button for another 15 seconds. You should see a notification on the screen indicating that the smartphone is ready for recovery. Press “recovery” and wait for the process to complete. After that you can turn on the iPhone XR.

When the phone turns on, you need to monitor it. If charging ends quickly, you will have to change the battery. Also check that you are using the original power cord. Non-Apple chargers may be designed for a different amperage, which negatively affects the iPhone XR.

Software failure

When a program fails, usually only the apple is lit and the device does not respond to power on. Then it is necessary to perform a forced reboot. Hold down Home and Power for this.

Reasons

The most common reasons that an iPhone does not turn on after it has run out of power are a power circuit failure, microcontroller failure, or a software error. Faults related to internal parts and “iron” should be entrusted to professionals. Failure in software can be corrected by yourself.

The iPhone is out of charge and will not turn on

If the smartphone does not respond when you connect it to the charger, then it is a deep discharge, or there is a problem with the operating system. If the iPhone is deeply discharged, you need to follow the steps below:

When the Apple logo lights up on the display. You need to release the keys;

Turn on and off silent mode if the smartphone does not boot up;

If the iPhone does not turn on after a frost, what should the user do?

Go into a warm room and leave the phone there for about 30 minutes;

After that you can connect your iPhone to the network.

Apple electronics do not work well in sub-zero temperatures. Prolonged exposure to cold may result in full discharge of the device.

Iphone doesn’t charge and doesn’t turn on

No charging caused by several factors: broken battery, broken power/charging controller, or non-original cord or power adapter. First of all, you need to check the cable. It should be free of kinks and damage. Also make sure to use the original cord. If there is an additional charger, you need to connect the iPhone to it. If the phone began to charge, the old cable is broken.

If changing the cable does not help, the problem is caused by the battery or the controller. These parts can be replaced only in service.

Battery replacement prices:

Iphone is charging and won’t turn on

The main reason why iPhone does not turn on after charging is the battery. The problem may be caused by deep discharge, if the iPhone does not turn on after a long period of non-use. There are several ways to fix the error:

Raise charge level to the lowest threshold. To do this, you need to connect the iPhone to the mains for 6-10 hours to restore the charge. Then you can try to turn on the smartphone.

If the previous method does not help, you need to change the charger and plug the phone back in.

Enter DFU mode. You need to charge the smartphone for 6-8 hours. On your computer, you should install iTunes and open the downloaded program. Remove iPhone from charger and connect to PC while holding Power and Home button. Then you need to release the Power button and hold the “home” key for another 15 seconds. You should see a notification on the screen, indicating that the smartphone is ready for repair. You need to press “restore” and wait for the process to finish. After that you can turn on the iPhone.

Once the phone powers on, you need to observe it. If charging runs out quickly, you’ll have to change the battery. You should also check that you are using the original power cable. Non-Apple chargers may be designed for a different amperage, negatively affecting your iPhone.

Software failure

If there is a problem with the software, usually only the apple is lit, but the device does not respond to power on. Then you need to perform a forced reboot. To do this, hold down Home and Power.

And another way is Tenorshare ReiBoot

You can also use professional repair tools to fix your problems. Tenorshare ReiBoot is the best software that can solve the most common iOS system problems, such as iTunes freezing (going into recovery mode) and backing up your iOS device (exiting recovery mode).

These operations are done with a single key, and personal data is saved without entering a password. Tenorshare ReiBoot also solves more than 50 crisis problems that even iTunes can’t handle. Such as black screen (blue screen, crash, etc.), blackout, crash, etc. Д.), logo failure, reset and unlock. By downloading and installing the latest firmware (Restore Operating System mode), this operation can be done without knowing the password. In the standard repair mode, you will not lose your data. But if your system has serious problems and needs a “deep repair”, your data will be lost.

You need to download and install the latest version on your computer. Run the application and connect the iPhone to the computer with USB cable.

After identifying your device, press the “Start” button.

Press “Standard repair” in this mode.

After identifying the device you will be prompted to select the firmware version (by default the latest version from the official Apple website is used).

The download will take some time.After downloading the firmware, you need to click on the “Fix Now” button.

Repair process should wait several minutes. After a successful repair iPhone can be used as usual.

First things first

Memorize! The life of a Li-ion battery is about 3-4 years, or 300-400 charge-discharge cycles.

If the smartphone serves longer than this time, it’s definitely time to go to the repair shop!

Connect to the charger

Put your smartphone on charging, it’s possible that it just ran out of power. After a while, after reconnecting the cable (it is advised to wait at least 15 minutes) iPhone should give signs of life: the battery silhouette or logo appears on the screen, after that iOS starts loading.

If it does not turn on, and the screen is lit red battery icon (smartphone is connected to the charger), the charger is faulty and should be replaced. Check the serviceability of the cord and power supply on the other phone. The problem could be the non-original charger, try to look for the original kit or its MFI Lightning analogues.

We recommend that you inspect the Lightning connector, as the rectangular hole is often clogged with dust and dirt. Detailed instructions below.

Alternative Chinese kits often fail, they are short-lived, lose compatibility with the device over time, can cause iPhone spontaneous combustion, or simply split and crumble. Often the defect occurs inside the insulation, the copper strand inside can break off, and a working looking cord will stop charging your phone. The highest quality of non-original chargers are ROCK and ORICO, they do not have any complaints.

If the smartphone can not start after 15 minutes, the screen remains black, does not even turn on the backlight, or displayed an image of a socket and lightning, the battery was discharged “zero”. Most likely, you’ll have to replace your battery with a new one, but more on that below.

Do a “hard” reset

You can try “waking up” the device yourself: reset the device without disconnecting it from the charger. To do this, press the power and home buttons simultaneously (or the volume down key for 7th gen models), hold for 10-20 seconds. To force a reset of your iPhone X, press the volume key up, then down, and hold the power button down until an apple sign appears. Click here for detailed instructions for each model.

After a cold or heat wave

If you keep your iPhone in the sunlight for a long time, the battery will overheat to over 45 degrees, and will need to cool down before you can use it: a thermometer icon will appear, and the message “the temperature is high, cool the device. Until the temperature drops, the functions of the device will not be available.

Cold lower.3.5 degrees, also “turns off” the smartphone: after hypothermia you need to keep the device warm. Sometimes the cell phone immediately shuts down on its own in freezing temperatures, this is a sign of a failed battery: there is a risk that it will have to be replaced.

Restore iPhone via ReiBoot software

Tenorshare ReiBoot is one of the best solutions for iOS problems such as: black screen and endless reboot cycles (the logo may be flashing). The program offers quick and easy solutions in a few clicks. If any of the above methods do not help, but it is necessary to remove the wheel rotates infinitely, a stuck logo or just a black screen on the iPhone, do this:

Download Tenorshare ReiBoot and install it on your computer, connect your iPhone to your computer using a USB cable.

Allow your device to recognize Reiboot and click “Standard Repair”.

Download the firmware package to continue the process. 4. Run the standard repair to fix iOS 15 hangs on a black screen. 5. Done! Repair complete.

With solutions like Tenorshare ReiBoot, you can be sure that your Apple smartphone will be recovered without damaging your data. With tools and the ability to fix almost every major problem in iOS, this is one of the best recovery tools on the market.

Tips: How to avoid charging and power on issues

We hope that our methods will help you to cope with the problem. Follow our recommendations and your iPhone or iPad will hold a charge longer, and if the gadget does go dead, you won’t have any problems turning it on.