Iphone Hangs On An Apple, What To Do Step-By-Step Actions

Iphone Hangs On An Apple, What To Do Step-By-Step Actions

iPhone hangs on an apple, what should I do?

After trying to turn on, does your iPhone hang on the apple and no longer respond? This suggests that there was a serious error in the system, which the device cannot solve on its own. Be prepared for having to restore your iPhone. Below are all the possible ways to help you solve the problem.

Diagnose a problem

“Eternal reboot” of the iPhone occurs due to a failure of the standard algorithm of actions that are necessary to turn on the smartphone. Perhaps the smartphone can not access the central processor, check the memory and configure the internal components.

There are only three reasons that provoke an “eternal reboot” of the phone:

  • IOS updates, data recovery and transfer from a computer to an iPhone, and other actions during which a third-party device gains access to the phone’s core features. Perhaps the error was triggered by the program “defenders”, a faulty cable or USB port;
  • Have you done jailbreak? The risk of system errors increases at times if you use jailbreak on an iPhone. The device is more susceptible to viruses and third-party bots;
  • Hardware issues. During startup, the iPhone first checks the operability of the hardware components and, if important elements do not “respond”, the phone cannot continue to start. Thus, the apple logo does not disappear and nothing happens.

Solution No. 1. Hard reset

A hard reset helps in 99% of cases. However, user data is not saved. After rebooting, all your personal files will be deleted. We advise you not to backup data, because its contents may contain utilities and options that provoked a freeze.

To make a Hard Reset, hold down the Home button and the power button until the Apple icon disappears. Next, animated gears will appear on the screen, which indicate the start of the system rollback process.

Hard Reset will end in 5-10 minutes. Then the iPhone will turn on. You will need to perform basic phone setup again (log in to your Apple ID, set up a fingerprint scanner, etc.).

Decision number 2. DFU Operation

If a hard reset does not bring any results, you must start the DFU operating mode. updating the phone’s standard firmware. This option enables automatic diagnostics and troubleshooting of the microprocessor.

As a result, DFU will roll back peripheral software, without the proper operation of which the hardware components cannot start.

Connect your iPhone to a personal computer and open the iTunes for PC utility. Make sure the phone is turned off. Press and hold the “Power” and “Home” buttons for 8 seconds. Then release the Power button, but still hold Home until the message “iTunes has detected the iPhone is in recovery mode” appears in the main iTunes window.

Next, in the program on the PC, press the OK key to start the process of rolling back the microprocessor firmware. Do not disconnect the computer or iPhone from the PC until the end of the DFU recovery. This can lead to a complete phone inoperability.

Decision number 3. Connection of loops

Perhaps, after a recent phone repair, the motherboard cables were not connected securely. Turn off the phone and open the back cover. Then check the connection of all loops shown in the figure. If necessary, disconnect and reconnect the component using a spacer or plastic spatula.