iPhone does not respond to buttons black screen

Black screen on your iPhone

And get the best deals from verified craftsmen.

• Compare and choose the best deal
• Feedback only from interested professionals
• You won’t waste your time talking to intermediaries

Even the highest quality smartphones occasionally malfunction. Any user can suddenly encounter such a problem as a black screen on the iPhone. If your gadget won’t boot or the screen is dark, don’t rush to get upset. It may not be as difficult to repair your device as it seems at first glance. Various breakdowns can lead to a black screen, which in some cases you can fix yourself.

Scenario 1. The battery is dead

Do not forget about the most obvious possibility. Iphone battery may run out of power. There’s no harm in trying to charge the phone first. If the cause of the iPhone malfunction is a dead battery, the phone’s screen will light up and display a dead battery icon as soon as you plug in the iPhone to a wall outlet.

If it does not happen immediately, do not panic, keep charging for a while and then check whether it appears or not. If the phone is still not responding, skip to the following situation.

Connecting your iPhone to a charger

This method is even easier than the previous one, but you will need a charger and a wall charger.К. You need a charger and an outlet, so I would have to charge it with the second one. Often the iPhone will not turn on simply because its battery is dead, especially if the phone is not new or it is winter. There is such a thing as “Deep Battery Discharge,” in which the device will need to spend some time on charge to start up. So you need to connect your iPhone to the charger and allow it to charge for at least 30 minutes.

Iphone won’t charge?

When the iPhone starts charging, the battery icon appears on the screen. As a rule, 30 minutes is enough for the phone to turn on, in case after connecting to the charger, the iPhone does not turn on, and the battery icon is still lit, perhaps the cable is faulty or the charger itself.

Iphone is charging

If you plug in a faulty charger or cable, the iPhone will display a battery icon with a Lightning cable, accordingly, you need to plug in a known faulty cable and adapter.

Iphone is not charging

If charging does not start, hold on to some tips:

• First of all, look through the Lightning port of your iPhone, it is not uncommon for various particles to get there, especially pieces of cloth from clothing s. Over time, these particles accumulate and crumple, then begin to obstruct the Lightning connector to fully fit into the phone port and contacts do not touch the back of the port, respectively charging does not begin. To clean the dirt is great blowing with compressed air and an ordinary toothpick, just remember, the contacts are very “delicate” and you do everything at your own risk, so be careful not to damage them.
• Make sure that the charger and cable are working, the easiest way is to connect another working iPhone. And of course it is desirable to use the original charger and cable for charging.
• If you are used to charging your phone with a wireless charger, or a laptop USB connector, then a completely off and discharged iPhone can simply not be charged, so you must connect your phone to a charger that runs on a network of electricity.

Other artists on Yudu

Problems with the “iPhone” can manifest themselves differently, depending on the nature of the fault. The following situations are possible:

Problems with “iPhone” may appear differently, depending on the nature of the problem. The following situations are possible:

• The screen is black or has faded, the phone does not respond to button presses and touching the sensor;
• Iphone turns on, but it gets hot (the display or adapter is hot) and discharges quickly (battery lasts for several hours, even if the full charge indicator is lit and the gadget is powered on all night);
• The smartphone is charged, but you cannot turn it on. The logo blinks for a long time, iOS does not start;
• “iPhone” constantly shuts down and does it spontaneously;
• Your iPhone doesn’t turn on, but it beeps and vibrates.

If you have used the iPhone for a long time in the cold and can not turn it on. The situation is normal, since the battery is designed for only a certain temperature. Wait until the battery has warmed up to room temperature before running diagnostics.

First make sure that the battery is charged and the battery is not the cause. Connect iPhone to original charger and press “Power. Device turns on quickly in normal conditions, but if the “iPhone” has not worked for a long time, it is likely that the battery is in deep discharge mode and you need to wait about half an hour. Check if the charger is warm, if there is no dirt in the connector. The iPhone may not start because there is not enough amperage (this happens if you use cheap chargers and connect the battery to a computer’s USB port).

If you see a black screen and your phone occasionally buzzes and beeps but does not turn on, try resetting it. To do this, you need to:

• Press the “Sleep/Wake” and “Home” buttons at the same time (if you have an iPhone 7 or 7S, use a combination of “Power” and “Volume”).
• Hold it for about 10-15 seconds till the “Apple” logo will load.

A hard reset will not erase the data “iPhone” (contacts, images, video, etc.).). If the smartphone still does not turn on, you will have to act more radically: restore the factory firmware.

To do this, connect the original USB cable to the computer and open the iTunes program, then press the “Power” and “Volume” (for 7th generation models) or “Power” and “Home” buttons (for “iPhone” 6 and earlier models); release them only when the screen goes out.

After that, press Home and with the USB cable connected to the smartphone, hold the button until the iTunes logo turns on and the plug icon appears. Confirm the iOS update procedure (if you want to save your data) or restore your iPhone (if the information has already been saved on other media or in the cloud).

The process of installing the new software takes about forty minutes. During this time it will seem like iPhone is turned off. The screen will turn off, the phone will not vibrate, buzz or become very hot. Internet connection must work well during the procedure, otherwise the software won’t load.

If there is nothing wrong with iOS, firmware and applications on the iPhone, it is better to contact a specialist to find the problem.

Of course if you have the necessary tools you can disassemble the “iPhone” and, for example, connect a new battery. But without experience and expertise, you can accidentally damage other parts and, of course, violate the warranty conditions.

Connect your iPhone to iTunes and restore the system

If nothing helps, don’t despair. We have another way.

Connect the device to your computer and run iTunes to see if it recognizes your device. If this happens, you can try to restore the system. If not. The problem becomes a little more serious.

Try to boot the device in recovery mode by performing a “hard” reboot. But then, continue to hold the buttons, even if you see the Apple logo, until the device goes into so-called DFU (recovery mode).

If the device is able to boot, iTunes will pop up a message saying that the device software needs to be updated or restored.

Click on the blue “Update” button and wait for iTunes to download the latest version of iOS, and then begin the OS installation process. Note right away that if nothing happens within 15 minutes, Apple recommends that you perform the switch to recovery mode one more time.

Note: this method is also suitable if the device tries to boot but fails to reboot before reaching the lock screen. So called cyclic reboot.

Internal components breakage

Even with careful handling of an Apple-gadget the user is not insured against its sudden death, which can be caused by the failure of one of the internal components, for example, motherboard.

In this state, the phone will not respond at all to charging, connecting to a computer, or pressing the power button. The only way out is to go to the service center, where, after conducting diagnostics, a specialist will be able to put forward a verdict, what exactly has affected such an outcome. Unfortunately, if your phone is out of warranty, it can cost a pretty penny to repair.

We looked at the main reasons that can affect the fact that the iPhone stopped turning on. If you have already had a similar problem, share what exactly caused it, as well as what actions allowed to fix.

For starters

Remember ! Li-ion batteries have a lifespan of about 3-4 years, or 300-400 charge-discharge cycles.

If your smartphone lasts longer than that, it’s definitely time for a repair shop!

Plug it in to the charger

Put your smartphone on a charger, it is possible that it simply ran out of power. After a while, after connecting the cable (it is advised to wait at least 15 minutes), the iPhone should give signs of life: the screen will appear silhouette of a battery or logo, and then starts loading iOS.

If the power is not on, and the screen is lit with a red battery icon (smartphone is connected to the charger), the charger is faulty and should be replaced. Check the cord and power supply on the other phone. The problem could be a non-original charger, try to look for the original kit or its MFI Lightning analogues.

Recommend an inspection of the charging connector Lightning, rectangular hole often clogged with dust and dirt. Detailed instructions are below.

Alternative Chinese kits often fail, they are short-lived, lose compatibility with the device, can cause iPhone spontaneous combustion, or simply split and crumble. Often the defect occurs inside the insulation, the copper wire inside can break off, and a working looking cord will stop charging your phone. The highest quality of non-original chargers are ROCK and ORICO, they do not have any complaints.

If the smartphone can not be started after 15 minutes, the screen remains black, does not even turn on the backlight, or displayed an image of a socket and lightning, the battery was discharged “zero”. Most likely you will have to replace the battery with a new one, but more about that below.

Do a hard reset

You can try “waking up” the device yourself: reset the device without disconnecting it from the charger. To do this press the “Power” and “Home” buttons simultaneously (or Volume-Down Key for the models from the 7th generation), hold for 10-20 seconds. To force a reset of your iPhone X, press the volume key up, then down, and hold the power button down until an apple sign appears. See detailed instructions for each model here.

After a frosty or very hot day

If you hold the iPhone in the sunlight for a long time, the battery will overheat to over 45 degrees, and will need to cool down before you start: a thermometer icon and the message “the temperature is high, cool the device” will appear. Unless the temperature is lowered, you will not be able to use the functions of the device.

Colder than.3.5 degrees, also “turns off” the smartphone: after overcooling you need to keep the device warm. Sometimes the cell phone shuts down on its own right away in freezing temperatures, this is a sign of a failed battery: there is a risk that it will have to be replaced.

Repair iPhone via ReiBoot software

Tenorshare ReiBoot is one of the best solutions for iOS problems such as: black screen and endless reboot cycles (the logo may blink). The program offers fast and comfortable solutions with just a few clicks. If any of the methods described above does not help, and you need to remove the endlessly spinning wheel, a stuck logo or just a black screen on your iPhone, do this:

Download Tenorshare ReiBoot and install on computer, connect iPhone to computer via USB cable.

Allow the device to recognize Reiboot and click “Standard Repair”.

Download the firmware package to continue the process. 4. Run a standard repair to fix iOS 15 black screen freeze. 5. Done! Repair completed.

With solutions like Tenorshare ReiBoot, you can be sure that your Apple smartphone will be restored without any damage to your data. Thanks to the tools and the ability to fix almost all major problems in iOS, it is one of the best recovery tools on the market.

Broken power adapter

The screen may not turn on when the phone is completely discharged. If the Apple logo does not appear when you plug in the socket, and the backlight does not light up. The problem lies in the charger.

Low-quality Chinese “chargers” tend to cost less, but fail at the most inopportune moment.

It is necessary to check the connector lighning, often there clog dust and dirt, as a result of lost contact and charging the battery does not happen.

Itunes repair (data loss)

If the solution suggested in the previous part of the article proves to be ineffective, it means that there are more serious problems in iOS. You can fix them with Tenorshare ReiBoot’s “Deep Repair” feature, but it’s important to keep in mind that this will result in the loss of all personal data stored in the iPhone’s memory.

Repeat steps.2 of the previous instruction, but this time mark the second tile and click the “Deep Repair” button.

All data and settings will be deleted, so the phone will need to be set up like new by logging into your Apple ID.