Iphone 7 Plus Camera Stopped Working

Iphone 7 Plus Camera Stopped Working

Did your iPhone’s camera stop working, instead of displaying a black screen? iOS warning that cooling is required before using iPhone flash How to fix any of these problems was described in this guide.

Method 1. Switch between camera modes

Let’s start with the ways to solve the problem with the iPhone camera suddenly ceasing to work here and now. They can help to restore the camera to working condition quickly, without switching to serious measures, which can be useful if you need to take a picture urgently.

The first such method involves repeatedly switching between the camera modes of the iPhone. Switch from the main camera to the front camera several times, and then check if the main camera has worked.

Read more:  Checking Iphone 5s Spoken Speaker

Method 2: Force iPhone Restart

The problem with the iPhone camera can be either technical or software. In the second case, a forced reboot often helps to cope with it. Pinch buttons Home and Nutrition on the iPhone and hold them until the Apple logo appears on the screen of the smartphone. After that you can check the camera.

Method 3. Lightly press your finger on the main camera

And another simple way to solve the problem, which you should definitely try before moving to the “heavy artillery”. To help bring the camera back to life, you can gently tap with your finger on the main camera module.

Method 4. Flash the iPhone through DFU mode

Important! Flashing through DFU involves deleting all data from the device, so before starting the operation, be sure to create a fresh iPhone backup.

In a large number of similar cases, the procedure for flashing the iPhone through DFU mode turned out to be a salvation. It is performed as follows:

Read more:  How to Remove Everything from an Old iPhone

Step 1. Connect your iPhone to a computer with iTunes installed.

Step 2. Transfer iPhone to DFU mode. To do this, simultaneously hold down the buttons Home and Nutrition and hold them for 10 seconds, then release the Power button and continue to hold the button Home until iTunes detects the smartphone in recovery mode (about 10 seconds).

Step 3. Click “Restore iPhone“.

Step 4. In the window that opens, click “Further“And”I accept»And wait for the software to download and then restore the iPhone.

Also note that in some problematic cases, recovery through DFU to manually downloaded firmware helps. You can download the latest firmware for your device from this site. In order to select it during recovery, click on the “Restore iPhone»You need to press while holding the Shift key.

Method 5: Reconnect the iPhone Camera Module

However, even more often the iPhone camera module is slightly to blame for the problem. In this case, turning the camera off and on again helps. You can find out how to disassemble different iPhone models in the following instructions:

Read more:  Monopod For Iphone 7 Which

If you are afraid to disassemble the iPhone with your own hands, there is only one way out. a trip to the service center.

Put 5 stars at the bottom of the article if you like this topic. Follow us on Telegram, VKontakte, Instagram, Facebook, Twitter, Viber, Zen, YouTube.