iPhone 7 not working after updating

Table of Contents

How to restore your smartphone to work

If you have updated the OS of an Apple phone to the latest version, and it turns off and does not boot after the update, you should try to reanimate it on your own.

The iPhone recovery process depends on the reason for the shutdown when updating the software. First, try putting the phone on charge (it is advisable to use the original charger, since Apple products do not respond well to accessories on the left). Updating the software can take a long time and therefore drain the battery.

If the battery runs out during updates and the phone refuses to turn on, connect it to a power source for at least a day. If the problem lies in a discharged battery, the result will not appear earlier.

If the phone still does not turn on after a day of charging, you can try to restart the gadget. Hard reset iPhone is the very first procedure for various minor breakdowns. It is used if there are any minor malfunctions of Apple technology.

If the phone does not turn on, you can use a hard reset of the device. To restart your phone, you need to do the following:

  • simultaneously press the “Home” button and the power button, which is located on top
  • hold the buttons in this position for 12-20 seconds
  • as a result, the Apple logo should appear on the screen

If the screen still does not turn on after you updated your iPhone, the lock problem is likely to be found in the internal details of the gadget or in the software in which the settings were reset.

After trying all the above recommendations, and finding that after updating the iPhone does not boot even after a hard reset of the device, you should not try to start the recovery process any further.

If the breakdown, after which the iPhone does not turn on when you updated it, lies in the microcircuit, only a professional technician will be able to diagnose and repair the gadget to restore it.

The repair process consists of the following steps:

  • neat iPhone disassembly
  • diagnostics to determine the reasons why the phone does not turn on after performing a software update
  • determination of the cause of the malfunction
  • removing spoiled items
  • installation of new parts
  • flashing the smartphone if necessary
  • assembling and checking the result

Only a professional can solve the problem if the phone is locked and it does not turn on after the update.

If you are not helped by a hard reset or charging the device when updating the OS, you should immediately seek help from a professional who is ready to provide inexpensive repair services. Self-analysis and an attempt to change the original parts will only lead to even more serious damage to the gadget.

iPhone won’t turn on after update

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If your iPhone won’t turn on after a software update, you can try to restore your smartphone to work on your own. Unfortunately, almost every owner of Apple products faced the problem of a non-working iPhone after the updates.

Causes of malfunction

IOS software updates are essential for your device to run smoothly and productively. Every software has at least one error, according to the law of programming. Specialists developing the program constantly “catch” errors, eliminate them and improve the phone OS to exclude emerging and possible software failures.

But sometimes the iPhone turns off and won’t boot after the update. You should not immediately carry the gadget to the service center, you can try to start the recovery mode yourself. The reasons for this problem are called the following:

  • the smartphone is simply discharged, as the update requires a lot of energy
  • the memory chip is out of order
  • the power button broke when the device was rebooted
  • removed the binding to the location operator
  • The firmware “flew” (program collection and reset)

In some cases, you can try to solve the problem on your own, without the help of specialists. To do this, if the iPhone has updated and does not turn on, use the recommendations below for recovery mode.

Where to find a professional

If your iPhone does not turn on after updating iOS and attempts to restore the smartphone on your own did not work, you should contact an experienced wizard. Submit an application through YouDo if your iPhone does not turn on, and indicate the signs of breakage and the model of the gadget in it. Specialists will leave their suggestions.

Also check out the wizard profiles to see how much it costs to repair your iPhone if it won’t turn on after an update.

7 Ways to Fix Outlook Not Working on iPhone

As mentioned above, it is common for Outlook email on iPhone to not work, due to occasional software crashes, network issues, and other malfunctions. Just find out more about the walkthroughs as shown below.

Outlook Mail doesn’t work on iPhone. here are 7 proven solutions for you

If you have the ability to sync email with the Outlook app on your iPhone, Outlook emails are not available, or the screen freezes when prompted to sign in, Outlook does not work on iPhone. it’s a headache. What problems?

In fact, there are several factors that can lead to the problem, such as Microsoft servers, internet connection, old version of Outlook, and more. In this article, you can learn more about fixes for Outlook not working on iPhone with ease.

iphone, working, updating

re-sign in Outlook account

If you’ve changed your Outlook account, you must reset it on iPhone as well. Otherwise, Outlook Mail won’t work on iPhone.

Disable Do Not Disturb

If you have turned on Do Not Disturb for driving or other occasions, Outlook Mail will not work with other network-sensitive applications on iPhone.

reinstall the Outlook app

If Outlook still doesn’t work on iPhone, you can try reinstalling the app on iPhone. Just search and download the Outlook app from the App Store to check if everything is working.

check your iPhone mail settings

If you are unable to sync Outlook email from computer to iPhone, check if Mail Sync Days is restricted by following these steps.

restart iPhone X / XR / XS / 11/12.

Restart iPhone. it is a useful and omnipotent solution to solve most problems, including Outlook email not working on iPhone. When your emails or attachment gets stuck, just try!

The screen is black or the device does not turn on

If you see a black or other solid color screen, or if you can’t turn on your device, see this article.

Display is too sensitive or not always responsive to touch

If the display is too sensitive or does not respond properly to touch:

  • Restart the device.
  • Make sure the screen of the device is clean and free of dirt particles or water droplets.
  • Disable Lightning or USB-C accessories.
  • Remove the cover and protective film.

If a part of the display does not respond to touch, does not always respond, or even responds without touch, contact Apple Support.

The display is too dark or too bright

For information on adjusting display settings on your device, see this article.

FIX iPhone Not Working / Not Turning On After Updating To iOS 14!

The display does not respond to touch

If all or part of the display is unresponsive to touch, you may need to force restart your device. Follow the steps below.

  • On iPad models with Face ID: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Press and hold the top button until the device restarts.
  • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Press and hold the side button until the Apple logo appears.
  • IPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the Top (or Side) and Volume Down buttons until the Apple logo appears.
  • IPad with Home button, iPhone 6s or earlier, and iPod touch (6th generation) or earlier: Press and hold the Side (or Top) button and the Home button until the Apple logo appears.
Read more:  Convenient Applications For Iphone 5s Error 9

If the display is still unresponsive to touch, contact Support Apple.

Touch screen malfunctions

The cause of this glitch is currently unknown. Currently, there are a couple of types of its manifestation:

  • The touch screen completely stops working, that is, the screen does not react at all to user actions.
  • Part of the display starts to flicker and stops working.

Errors appear after installing iOS 11 and can only be cured by rebooting the device or restoring via DFU.

Force reboot device

Failure of the touchscreen after the update is a software failure, so fix it without sending it to the service center for repair. Restart your device first. If the screen still refuses to respond to touch, then it is worth performing a forced reboot.

  • Press and hold the Home and Power buttons for a few seconds (Power and volume down if you have an iPhone 7 or older). The screen should go out.

Release the buttons. If the Apple does not light up on the screen, briefly press the power key

Hard reboots are not recommended to be performed too often, so if the problem with the Touch screen persists, then you should try the following solution.

Display colors are skewed

If the colors on the display are distorted, the color filters may need to be adjusted. For information on using the Customize Display feature on your iPhone, iPad, or iPod touch, see this article.

Learn more about the display on iPhone X and later.

Way 2. iPhone touch screen not working after being dropped? Force restart iPhone

For most iPhone problems, you can easily fix them by restarting your iPhone.If your iPhone’s touchscreen is not working, you can also use this method to fix it. Because for a reset iPhone, it will return to normal, unless the hardware is damaged.

However, if your iPhone touchscreen still can’t come back from an unresponsive situation, just restart it.

First press the Volume Up button on the left side of the latest iPhones and quickly release. Then press and release the Volume Down button next to the Volume Up button.

Press and hold the Power button on the other side. When the Apple logo appears on your screen, you can release the power button.

Enter the startup password and complete the forced restart of iPhone X / 8/8 Plus.

Continue pressing the Power or Sleep / Wake button on the right side of iPhone 7. Then press and hold the Volume Down button on the left side at the same time.

Wait for the Apple logo to appear, release both buttons. Enter your PIN at startup.

Press and hold the Home button and the Power button at the same time.

Hold both buttons until the Apple logo appears on your iPhone screen. Release the buttons and wait for the startup screen to appear.

Login to your iPhone with password.

Then you can check if your iPhone’s touchscreen can work or not.

Way 1. Best Way to Fix iPhone Touch Screen Not Working Properly

The first method is also the best one we want to recommend using iOS System Recovery to fix iPhone touchscreen that stops working.

iOS System Recovery. It is the most professional recovery software that allows you to fix system problems iPhone touch screen not working, black screen, etc.

Fix iPhone Touch Screen Unresponsive, White, Black, Etc.

Get iPhone out of headphone mode, recovery mode, Apple logo, etc.

Fix iPhone Safely without Data Loss.

Compatible with iPhone XS / XR / X / 8/7/6/5/4 and iOS 12.

First of all, go to the official website and download iOS System Recovery to your computer. And then install this software according to the installation. After installation, you can run this software on your computer.

Start iOS System Recovery

Now you need to click Tools and select iOS System Recovery to enter the main recovery interface. You have to connect your iPhone to your computer via a USB cable. And then click the Start button to start iOS System Restore. Meanwhile, this professional software will detect your iPhone automatically.

Put iPhone into Recovery Mode

After this software detects your device, you need to click on the question icon and follow the guide that gives you to put your iPhone into Recovery Mode or DFU Mode. For example, if your iPhone 5’s touchscreen isn’t working, you can put it into recovery mode.

Then you need to choose the correct iOS model and other information about your iPhone. Then click the Download button to download the firmware. It will take you a few minutes to complete the download.

Fixed iPhone touchscreen not working

When the plugin is fully loaded, iOS System Recovery will automatically fix iPhone screen not responding. What you need to do is wait for the process to finish.

How to Fix iPhone Touch Screen Not Working

In the process of using iPhone, many users complain that their iPhone touchscreen is not working after updating or resetting.

It is really annoying when your iPhone screen is not responding. If it is a problem with the iPhone touchscreen itself, you should take it to a repair shop to fix the problem.

However, the problem may be caused by an app, operating system, or iPhone.

In this article, we list 3 methods to solve iPhone touch screen not working.

  • Way 1. Best Way to Fix iPhone Touch Screen Not Working Properly
  • Way 2. iPhone touch screen not working after being dropped? Force restart iPhone
  • Way 3. iPhone touch screen not working after update? Restore iPhone

Way 3. iPhone touch screen not working after update? Restore iPhone

If force restarting iPhone cannot help you solve the iPhone touchscreen not working, you can try to restore iPhone using iTunes because it will update your iPhone to the latest version from iTunes.

To restore iPhone using iTunes, follow these steps.

Note: this method also works to fix water damaged iPhone.

Download the latest iTunes to your computer and launch it. Remember to connect your device to the computer that you previously synced with iPhone via iTunes.

iTunes will detect your device and your iPhone will show up in the interface. You have to click on the “Device” tab and then select “Summary”.

If you want to back up your iPhone now, you can click on that computer and then click “Backup Now”.

After a successful backup, click “Restore iPhone” and select the backup you made earlier. If you’ve already made a backup, you can click Restore iPhone directly and then click Restore again in the pop-up window to confirm your actions.

Just wait for iTunes to restore your iPhone, download the latest iOS software, and restore iPhone from iTunes backup.

In this article, we recommend several ways for you to fix iPhone touchscreen not working. You can force restart your dropped iPhone to check if the screen isn’t working. You can restore iPhone to the latest iOS version to avoid touch screen not working after inappropriate update. Of course the best way. use Apeaksoft iOS System Recovery to fix any software-induced problems on iPhone, which can fix this problem completely.

Camera (black screen) and flashlight not working in iPhone. how to fix?

Hey! Just recently, I had to update an iPhone 5S on iOS 10 to one friend and everything would be fine, but. then I would not write this article 🙂 In general, the next day he came to me and said literally the following: “Apple is all scoundrels. They artificially make devices obsolete. they force them to buy new ones. Look, after the update my rear camera stopped working (there is now always a black screen), and the flashlight does not turn on, it constantly writes about some kind of overheating, although the device is completely cold “.

I can certainly believe that Apple is somehow being forced to buy their new gadgets (for example, adding new chips). But not as barbaric. a simple update breaking cameras. Therefore, it was decided to try to correct this ailment and. it worked! How? I’ll tell you now, let’s go!

From the outset, it should be noted that, with regards to this problem, the rear camera and flashlight are dependent on each other. The camera will show a black screen, and when the flash is turned on, it will say: “Flash is off. Cooling is required before using the iPhone flash. ” This is, so to speak, the main symptom.

So, first of all, I climbed to look and see what people write about this. It turns out that the Apple forum already has a whole thread dedicated to this ailment. And there will be enough such “lucky ones” (with the camera not starting after the update) for the whole town. True, it mainly deals with the iPhone 5, but the 5S, as well as other gadgets on iOS, are also mentioned. Here are some tips and actions we managed to spy on. after completing them, the camera worked again for some:

  • Enable or disable power saving mode (how to do this?).
  • Switch cameras (from front to back) several times. Until the black screen disappears and it starts to turn on.
  • Apply a little pressure around the camera (very carefully!).
  • Close all applications that might be using the camera and try again.
Read more:  How To Hide Sms On Iphone

If it does not help, then we proceed with the standard set of Apple technical support tips designed to eliminate any error related to the iPhone and iPad:

  • We do a hard reset of the gadget. How? The answer is here!
  • Full reset of content and settings.
  • Restoring the latest current firmware via DFU mode.

If this does not help, then you will have to climb inside the gadget.

In the event that the device is under warranty, do it yourself oh how it should not.

If the skills of assembly and disassembly are not alien to you, then we check and turn on / off:

  • Camera loop.
  • Battery.

Perhaps they just moved away after a fall or other blow. If the phone is unofficially restored, reassembled or has undergone some kind of “handicraft” repair, then very often it can be noted that there is no special film on the loops, which allows you to securely fix the loop in the connector. And at the slightest fall, it just falls out.

Even if everything is in place and it seems to you that they are firmly installed to the end, to solve the inoperative flash and black screen when starting the camera, you need to pull them out and insert them. Yes, a simple reconnection is enough in most cases.

It should be noted here that a friend bought an iPhone 5S on the market and who, how, and from what assembled it. we naturally do not know. In any case, if on the previous version of iOS this did not prevent the camera from starting normally, then after the update something went wrong and instead of the subject we saw a solid black screen.

I hope that you will not get to the point of disassembling the device and making the camera with a flashlight work in other, simpler ways. Although there is nothing difficult in the last version, you just need to act carefully and not break anything else! 🙂

Recovery via DFU

If the screen does not work after installing the iOS 11 update, and a forced restart does not help, perform a restore with the installation of iOS 10.3.3. Download the firmware for your device and start putting your phone / tablet into DFU mode.

  • Connect iPhone / iPad to computer running iTunes.
  • Press Home and Power at the same time. Hold for 10 seconds.
  • Release Power and keep holding Home. Within 15-30 seconds, iTunes will display a message stating that the device is in recovery mode. IPhone / iPad screen will remain black.

If iTunes does not show a message saying that the device is in recovery mode, then you have lost track of when you hold down the buttons. Take a stopwatch and try to enter the phone in DFU again.

After restoring in DFU mode with firmware rollback, all data will be deleted from memory. In order not to lose them permanently make a backup.

  • Select the connected device.
  • Hold down the Shift key on your keyboard (Alt / Option on Mac) and click “Restore”.
  • Select the iOS 10.3.3 firmware file.
  • Confirm installation.

Once the installation is complete, you can restore your iPhone as a new one, or get your data back from a backup made before updating to iOS 11. On iOS 10.3.3. there are no software glitches in the touchscreen, so the problem is solved. It remains only to wait for the release of the next update with bug fixes for iOS 11.

Force reboot device

The failure of the touchscreen after the update is a software error, so you can fix it without contacting a service center. Restart your device first. If the screen does not respond to touch at all, perform a forced reboot.

  • Press and hold the Home and Power buttons for 10 seconds (Power and volume down on iPhone 7 and above). The screen should go out.
  • Release the buttons. If an Apple does not appear on the screen, briefly press the power key.

Do not use hard reboots too often, so if touchscreen problems continue to appear, move on to another troubleshooting method, which is to restore the previous stable version of iOS.

Screen not working after iOS 11 update: fixing the error

Some users have faced the fact that their screen does not work after the iOS 11 update. The problem manifests itself on the iPad and iPhone and is not massive, but it is quite common, judging by the posts on various forums.

Touchscreen malfunctions

The exact cause of the problem has not yet been established. The problem manifests itself in different ways:

  • The touchscreen completely falls off, that is, the screen does not react at all to user actions.
  • Part of the display starts to flicker stops working.

Errors appear after installing iOS 11 and are eliminated only by rebooting the device or restoring via DFU.

IOS 11.0.1 update

After numerous reports of incorrect operation of iOS 11 on different devices, Apple developers promptly released the iOS 11.0.1 update, which fixes critical bugs.

In addition to healing the screen, the patch also improves device performance and increases battery life. The full list of updates and fixes is not disclosed, but judging by the size (about 280 MB) there are a lot of them.

How to solve the problem with a breakdown

With insufficient experience, the best solution would be to inspect the gadget for mechanical damage, as well as to carry out calibration. If the calibration fails, the service center staff will help. Especially if sticky liquid (alcohol, soda, etc.) gets inside the device. IPhone 7 Button Not Pressing? While the problem is being resolved, you can launch the virtual alternative using Assistive Touch. Let’s analyze the solutions in order.

Causes of problems with the Home button

  • Liquid ingress. Although the device is impervious, you should not allow the liquid to come into contact with the smartphone.
  • Falling down, pressing hard. Inadvertently, the user drops the gadget, or presses the button too hard. another reason why the Home button does not work on the iPhone 7.
  • Frost and other climatic conditions. When using your device in cold weather, the Home button on iPhone 7 stopped working? In this case, it is better to go into a warm room and wait until the phone warms up.
  • Wear. After several years of operation, the equipment may break down, as well as its components.

On my own

The key may have stopped working due to contact with dust. Also, greasy hands can also cause breakage. Apply a small amount of WD-40 aerosol to the key, touch it several times. But use a small amount of chemical and do not let the aerosol come into contact with the screen.

In many situations, standard calibration is the solution to the Home button problem. If the Home button is not working on iPhone 7 Plus, do the following:

  • Turn on any application, hold down “Power” and wait for the command “Turn off”.
  • Hold “Home” for 10 seconds to make the application quit. After that, calibration will start.

To turn on AssistiveTouch, go to Settings and then open Accessibility. Item “Interaction”, then run the toggle switch “AssistiveTouch”.

Home button stopped working on iPhone 7

Even the most tidy Apple smartphone users can run into problems. Usually, the Home button doesn’t work on iPhone 7 after replacing the display, but there are other reasons as well. Let’s analyze the main ways to solve the problem below.

There are many reasons for the home button breakdown, but most often it is due to poor handling. If in your case, after a poor-quality repair, the home button on the iPhone 7 does not work, it is worth trying several methods to solve the problem. Let’s analyze the main reasons.

Through the service center

Due to the intricacies of replacing “Home”, it is rather difficult to do it yourself. In this case, feel free to contact the service center staff. The next generation iPhone 7 scanner is motherboard-bound, making DIY repairs even more difficult. We also advise you to read the information on how to replace the Home button on iPhone 7.

Instructions for solving the problem yourself:

IPhone 7/7 Plus microphone is not working. What is the reason?

A few posts ago touched upon the iPhone 7 touchscreen, which was disabled after updating the system to iOS 11. Then, recall, non-original displays for the seventh iPhone stopped working after the update. This was solved either by rolling back to the previous version of the system, or by installing an update while the original idle module was installed. Several versions later, with the release of iOS 11.3, the owners of the sevens faced a similar problem, only this time the microphone turned out to be inoperative.

Fault diagnosis

After upgrading to 11.3, some iPhone 7 and 7 Plus users wondered why the other person couldn’t hear them during a call. And it doesn’t matter if the call was made via a mobile network or through applications like WhatsApp or Skype. During an attempt to make a call, including FaceTime, the owner of the seven sees inactive speaker and microphone buttons on the screen, which is not solved by rebooting the system.

The problem is serious because it paralyzes the main purpose of a mobile phone: it is impossible to call without a microphone. In addition, all voice assistants turn out to be inoperable, dictation of text in the standard keyboard stops working and, most importantly, Siri refuses to function. The seriousness is complemented by the impossibility of a programmatic solution to the problem: a simple update of nothing, by and large, will leave everything as before.

Read more:  Disable Iphone X Screen Recording

Other causes of microphone failure

In addition to the problems described above, the microphone may stop working for a number of other reasons. Among them, it is important to highlight: moisture ingress, falling, dust clogging and the consequences of unsuccessful cleaning. Moisture can only get on the iPhone 7 microphone in one case: if the protective membrane is damaged. It changes along with the recording device, and the whole procedure takes about 20 minutes.

If dropped, the contacts of the sensor and the board may be damaged, and due to the ingress of dust into its shaft, sound waves will not corny reach the sensor. If, however, the hole is carelessly cleaned with a tool unsuitable for this, mechanical damage may occur. Then the performance of the microphone can only be restored by replacing it with a new original.

Apple’s reaction

Apple quickly reacted to the sudden malfunction by promptly preparing instructions for service centers. According to the obtained aLGorithm, employees must first recommend the user to disconnect all wireless devices from their iPhone, after which, if this does not help, diagnose the internal parts that are responsible for playing and recording sounds.

If during the check the error “accessory is not supported” or “the device cannot find the docking station” occurs, then the user is guaranteed a free microphone replacement. If these problems do not exist, then everything is solved by simply resetting the smartphone to factory settings. The Apple documentation for such instructions does not mention the nature of the problem. It can be either software or hardware. The problem is solved only by replacing the non-working microphone with a new original part.

If your iPhone has problems with the microphone, then you should not rush to solve this problem yourself. It may be possible to replace it under warranty if the case is related to the update described above. Even if the case is not guaranteed, that is, there is mechanical damage or moisture has got on the sensor, it is also recommended to contact professionals.

disable autocomplete, iCloud and JavaScript bookmark sync

Go to Settings [your name] Safari Auto-complete and turn off all on-screen options. Then turn off the JavaScript option in the Safari preferences screen.

Go to “Settings”. [Your name]. iCloud and turn off “Safari” and “Bookmarks” sync.

Make sure you have Allowed Safari under Preferences Restrictions.

Now the problem is not working Safari should not recur.

checking user files

If Safari doesn’t work again after restarting, you should make sure your custom resource files are in order. Corrupted custom files can cause Safari and other problems on Mac.

Find Apple System Preferences Users & Groups.

Follow the onscreen instructions to create a new user, and then restart your Mac. Now try Safari again.

Tutorial to Fix Safari Not Working on iPhone, iPad and Mac

Safari. it is a pre-installed web browser for Mac, iPhone, iPad and other Apple devices. It is popular, in part because it is faster and more secure; however, this does not mean that Safari always works fine. Some people recently claimed that Safari does not work on devices.

For example, “Safari stopped working shortly after I updated the software, now it won’t open, how can I fix this?” According to our survey, this issue occurs on both Macs and iPhones for a variety of reasons. In this guide, we’ll show you a general solution to Safari not working on iPhone and Mac.

software update

If Safari doesn’t work on old iOS, try updating software for your iPhone.

Go to Settings [your name] General Software Update to check for a new update.

Click Download & Install, enter your password to verify you are the owner, and start updating your software.

restart your iPhone

Despite its simplicity, restarting an iPhone is always the starting point for troubleshooting iPhone problems.

When iPhone Safari is not working or responding, press the side button for a while to activate the shutdown screen.

Slide the switch to turn off your iPhone. Wait a few seconds and then press the Side button to turn it back on. Now open Safari again, it may work fine.

remove extensions

When Safari doesn’t work due to corrupted extensions, is there a way to remove them? Steps below. this is the answer you are looking for.

You can also go to Finder Go Go to Folder and type

Delete the folder from your Mac computer. This will forcefully remove all Safari extensions.

Now let’s try Safari on Mac.

How to fix Safari not working on Mac

When faced with Safari not working on Mac issue, you will find tips to help you fix the problem simply.


If the device has been in operation for more than one year, the iPhone was often repaired, its parts were changed, then the iPhone does not turn on after the update due to “smart” automatic diagnostics.

This system is built into the new firmware to restrict users of Apple products so that they do not install analogs of lower-cost components on the iPhone.

When updating the OS, the serial number of the microcircuit tied to the “motherboard” is checked. If the spare part is not original, the smartphone will turn off.

Why won’t iPhone 5s turn on after updating? Starting with version 5 devices, the fingerprint scanner has an identification number that is tied to a unique processor identifier. If you replace it, and the phone is not reflashed, it will not turn on.

An OS bug, due to which it is impossible to turn on the device, is not always associated with an updated firmware. Sometimes another chip is damaged that previously functioned normally.

A list of other reasons due to which the gadget does not work:

  • Battery discharged.
  • The device is overcooled.
  • The “save” mode is on.
  • System memory chip not working.
  • In the location where the user is located, for some unknown reason, the phone is not tied to the system provider.
  • The OS crashed because it was performing a factory reset or otherwise.
  • iPhone 5 after updating does not turn on due to breakage of the on / off button.

If the cause of the malfunction is simple, the user will be able to restore the operation of the device on his own. But it is better to trust the employees of the service center, especially if the smartphone is under warranty service.

What to do if iPhone won’t turn on after updating

If you have a question about what to do if the iPhone does not turn on after updating, you should investigate the reasons that caused this problem.

Hard reboot

How to turn on iPhone after update? A hard restart is required. In half of the cases, this manipulation will help “revive” SE or another model. The user needs to simultaneously hold 2 buttons: console and side, which includes the gadget. We wait 3-5 seconds.

Charging the battery correctly

What to do if iPhone won’t turn on after updating? If the charge is at zero, then the gadget needs to be recharged for at least 1 hour. Also worth doing if iPhone X won’t turn on.

In cold weather, the battery will drain quickly. In this case, the phone needs to warm up to room temperature, then it is charged. If this condition is not met and a cold smartphone is charged, the temperature difference will lead to the formation of condensation, a short circuit will occur, and the gadget will stop functioning.

If charging did not help, iPhone 6 does not turn on after the update, a hard restart will help.

Simple Fix for iPhone Problems see update in description. HARD RESTART for iPhone 7 & 8

Recovery using Apple branded software

If the previous methods did not help and the iPhone 6s does not turn on after the update, it is recommended to follow the procedure:

  • The outdated iTunes software from your PC is removed and reinstalled. We find it on the official website of the developer. There is a high probability of damage to the old version of the program by viruses, so it does not function properly.
  • We connect the device to a PC to synchronize it with iTunes when the gadget is operating in Device Firmware Update mode.
  • If iOS version 10 was installed, it is better to try version 9 as it works more stable. A return to the previous system is necessary if the phone cannot be rebooted on an updated iOS.
  • We connect the smartphone to the PC, wait for the moment when iTunes is activated.
  • The power button and “Home” are clamped and held until a window appears prompting you to restore and reset the software.
  • We select the recovery mode, we wait until the procedure is over.

It is recommended to back up all the information on the phone, because after the upgrade, the system sometimes crashes, the firmware flies, the OS needs to be reinstalled, and all data will be deleted.