iPhone 7 hearing speaker not working

Table of Contents

Clean the iphone 7 speakers with a toothbrush or tape

iphone, hearing, speaker, working

You can also use a soft bristled toothbrush for cleaning. The ports should be cleaned with light strokes. This should remove dust and dirt from the holes.

Then roll them in sequence to the speaker holes. The adhesive surface should wipe off all dirt and dust.

How to clean your iPhone 7 earpiece and earpiece by yourself. dust, dirt or water cage

The iPhone 7 debuted on September 16. Since then, various experts have subjected the smartphone to various extreme tortures.

It even turned out that, despite Apple’s promises, it is not waterproof, but despite many negative statements, the phone is on sale.

However, the latest messages, potentially unpleasant for Apple, could make the iPhone 7 unpopular.

It turns out that a fairly large group of iPhone 7 Plus users are complaining about the sound quality during phone calls.

IPhone 7 and 7 Plus users claim that the sound coming from the speaker is severely distorted. Decreasing the volume helps to cope with the problem, but this is a temporary solution.

Of course, not only does a lot of dirt accumulate in the ports of the iphone 7 / iphone 7 plus, but it can easily get into the ear or speaker (loudspeaker) speaker. In these places, dust and dirt collects, as a rule, from the s of our trousers.

Fortunately, the service is not required for you, and you can independently clean the iPhone 7 speakers from dust, dirt and even water at home.

Below are the different options for cleaning the front and bottom speaker, from simple to complex. Everyone can choose the best option for themselves.

ATTENTION: you will not believe, but there is an application that can clean the speaker. it applies the sound of a special frequency. Try it. here is the description.

Clean the speaker on iPhone 7 with compressed air

Phones attract dust much more than other objects. This is due to the electromagnetic field generated by the devices.

To get rid of dust and particles from the speaker, it is good to stock up on a can of compressed air and direct the nozzle horizontally to the holes.

Clean the iphone 7 speakers by disassembling

Dirt, dust, water and iron filings are attracted by a magnet, as well as mechanical damage.

All this affects the iPhone 7. After all, a speaker is not only a telephone receiver, where we hear our interlocutor.

It is also multimedia and speakerphone. A similar situation applies to microphones installed in the iPhone. In the latest models, it can be three or even four microphones.

If the sound is still quiet despite the highest volume, make sure the speaker grill is clean.

To do this, the easiest way is to take a cosmetic stick (for example, for the ears), moisten it with alcohol, squeeze it well, make it wet, but not wet, and wipe the speaker surface.

Sometimes the speaker works, but the sound comes out like clicks. In this case, the membrane, which is made of very thin foil, is likely to be damaged.

In older models, the membrane is rather strongly affected by external conditions. metal filings were attracted by the speaker magnet, cutting and destroying the membrane film.

In the iPhone 7, the earpiece is housed in a plastic case with an output channel, but despite this, it continues to wear out and be damaged. In case of sound quality problems, the speaker should be replaced with a new one.

There may also be another issue related to the lack of communication on the motherboard, which is achieved with the speaker flex tape, but also recording microphone sound in speakerphone and FaceTime video camera.

Unfortunately, in this case it is necessary to check the cause of the malfunction by trial and error by placing new elements and testing the device. If such a problem occurs, you should look forward to a replacement cable.

Only you are unlikely to dare to replace the train yourself. In the service, the time of such repairs should not exceed 30-60 minutes.

If it is necessary to replace the module together with the microphones, the repair time depends on the model. For iPhone 6S, including Plus models, the repair time should not exceed 30-60 minutes, but for models 7 and above, the repair time is about 2-3 hours.

Use a toothpick to clean the speaker in iphone 7

Toothpicks Are Helpful Tools In Dealing With Dirty iPhone Speakers.

Just like with everything else, you have to be careful with them, ensuring that you don’t press too hard on the thin grate.

Use the tip of a toothpick to gently wipe the speaker by dragging any dirt around the edges where you can pick it.

You should be able to chunk off pieces of dirt, although if this is difficult you can slightly dampen the tip of a toothpick.

How To Fix The Ear Speaker On Any iPhone! [Hearing Issues | Low Volume]

Be careful not to chip the toothpick, creating even more clutter on your iPhone.

Use a toothpick to gently brush into the dirt. However, you must be extremely careful when wetting a toothpick, as the liquid can very easily end up behind bars and cause irreparable damage.

Quiet speaker during calls on IPHONE 7

Very often, iPhone 7 users complain about the top earpiece. During a call, the caller / person who is calling us can be heard very quietly, despite setting the maximum volume using the side buttons.

The problem is often not with the loudspeaker but with replacing the top mesh from the loudspeaker.

It is recommended to clean the speaker mesh with a brush or compressed air at least once a month to avoid similar problems in the future.

It is very important to carry out all maintenance professionally and not damage the LCD during repair.

Contrary to its appearance, a lot of dirt can collect in the speaker. You cannot avoid this without stubs.

It happens that even the most efficient equipment fails. In the case of the iPhone 7, it sometimes gets damaged.

As a result, we do not hear the interlocutor in the telephone or voice communication. It also happens that other sounds are incomprehensible.

In this situation, you can try to diagnose and repair yourself.

How to protect your iphone 7 speaker from dust and dirt

Most of the available cases have a notch for the phone speaker, so they don’t affect the sound quality.

People who often carry smartphones in their s or keep them in dusty places can opt for a unique case.

Despite the fact that the speaker in the case is closed, the cover does not affect the quality of the music and information signals being played.

The extremely elegant Wood Cases are made from high quality woods and are available in a smooth and engraved version. Success.

Other reasons why the speaker does not work on the iPhone

If the speaker does not work well, you can take your time with the repair, because you can still talk in some way, but when it does not work at all, then the reason may be hardware. a breakdown of the loop or the element of the motherboard responsible for audio.

Alternatively, try headphones, very often they work, and when you have free time, you can contact the service.

There is a nice moment for you here. the loop or speaker changes very quickly. about 20.30 min.

So you won’t be without communication for a long time, although a lot depends on the service point itself. make sure that the service is good there, otherwise you will wait a week for the employee to find a suitable required component.

Cause of the fourth iPhone fell and the speakers do not work

If the phone is dropped into water, the speaker could easily be damaged. However, not only the speaker, but any element responsible for the sound.

The same can happen if you fell into the snow and lay there a little. the phone is warm, the snow melts water gets into the device.

Once my wife dropped it into the water (incidentally, I also dropped it into the water while fishing, but I got carried away), so not only the sound did not work or it didn’t turn on, but the phone didn’t even fit in the repair.

If someone after a fall has flooded the iPhone with water, then the sooner you need to remove the battery (the smartphone partially works even when it is turned off) in order to avoid short circuits on the board.

Read more:  How to Make Silent Mode On iPhone

The second reason why the speakers on the iphone do not work is the headphone jack

If you often use headphones, then the connector is very often damaged, while the smartphone writes headphones are connected (it may not write).

What to do. For a short time, it can solve the problem if you insert and pull out the headphone cable from the device several times.

You can also pick a match in the connector, but if you continue to use the headphones, you will soon have to replace the connector.

This is not only a problem with smartphones, but it also happens so often on TV. In the connector, the metal plate simply does not return to its original position and the device behaves as if headphones are connected.

6 proven recommendations if the speaker on the iphone does not work

In iphone 6, iphone 5s, iphone 5, iphone 6s, iphone se, iphone 4s, iphone 4, iphone 7 plus, iphone x, iphone 7, iphone 2g, iphone 8, like others, there are 2 speakers: upper and lower and sometimes it happens that 1 speaker does not work, and the second works.

over, if one ear (auditory) speaker does not work, that is, the spoken one, and the speakerphone or external (headphones) can work.

There are several reasons and most can usually be eliminated on their own without visiting specialized places.

If both speakers stop working at once, the situation becomes more complicated, but it often gives in to an independent solution.

It also happens that the speaker works quietly or badly during a conversation, for example, wheezes. we will also consider this situation below.

Sometimes you even need to get inside the iPhone 5, iPhone 6, iPhone 5s, iPhone 4, iPhone 4s, iPhone 7, iPhone 8, iPhone se, iPhone 5c, iPhone 6 plus and so on, but I hope this future will bypass you.

NOTE: Believe it or not, there is an application that can actually restore the speakers on the iPhone. here it is. Recommend to try.

The reason the fifth speaker in the iphone is working poorly or quietly

Very often, the sound quality in a smartphone is poor. Wheezing usually occurs after a fall. the membrane is damaged.

What to do? Just change the speaker. they cannot be repaired, and they are not expensive (the better the quality, the more expensive).

The speaker works quietly when dust accumulates in it or liquid is especially sweet.

What to do? Cleaning usually solves the issue. If there is dust, it can be blown out with a can of compressed air.

Also, the sound can become quieter when the resistance on the audio coil falls (sat down like a battery), then only change to a new one.

The first reason why the speakers on the iPhone do not work. it is simply turned off

Apple devices have an almost imperceptible button on the case and you can accidentally hook it. it mutes the sound (see the picture above).

What to do? Just move the button to a different position (so that the red or yellow stripe does not appear on the side) and see what happens.

Also, the sound can be turned off through the settings. the built-in do not disturb function is launched (Android also has one).

Then you will not hear if someone calls you. This is a crescent-shaped icon. make it inactive (grayed out).

The third reason why the speaker on the iPhone does not work is the Bluetooth function is turned on

Apple smartphones can route audio to a Bluetooth accessory then the speakers will not work.

What to do? Just go to the settings and turn off Bluetooth. if the sound appears, then you can turn off this function.

If it doesn’t appear, then it’s not something else, for example, the software. Then just do a factory reset.

How to do this here I will not, because here on the site there is already a ready-made instruction. here is the guide.

Speaker does not work in iphone. summarize

Summing up, we can say the following. The smartphone has a top and bottom speaker. Anyone can get damaged. The main reasons include:

  • pouring a smartphone (snow, rain, tea, beer, coffee, juice, water);
  • mechanical damage (falls: fell, dropped);
  • dust, small debris, connector
  • software failure;
  • the volume is turned off;
  • manufacturing defects.

If there are suspicions of a factory defect, then immediately bring the Apple service, just make sure that there is no non-licensed software in the iPhone. if there is a repair under warranty, you will not get it.

Also, the warranty is canceled if the device is dropped, flooded or damaged. then you can contact any service. not necessarily Apple. Success.

Why iPhone speaker doesn’t work

In fact, in terms of design features, the dynamics of iPhones are no different from any other sound sources in modern smartphones. The only thing, since the iPhone 7, Apple has added power to the top module and combined it with the one on the bottom. Thus, they achieved stereo sound and, accordingly, sound quality. In general, this does not affect performance in any way, so this point can be omitted.

Call sound cannot be heard without the bottom speakers

If the speakers on the iPhone do not work, which could be the reason:

  • the first and most obvious option is that water got in and the contacts oxidized. To hear the interlocutor or the ringtone, the speaker is protected by a usual fine mesh. There can be no sealed protection here, so it is enough to walk in the rain or put the phone to your sweaty ear to consider this as the cause of a malfunction;
  • the second reason for popularity is mechanical damage, in other words, the iPhone was dropped, and the sound disappeared. There may be several breakdown options. the sound card cable has come off, the board is cracked, etc.;
  • if the gadget has been in the sun for a long time, this can also cause a malfunction. Such sensitive equipment as the iPhone, in principle, does not like high temperatures, and the melting of the board, matrix and other components could lead to the failure of the speakers (it is noteworthy, but the melted board may have almost no effect on the operation of the device);
  • dust and debris. An underestimated problem, but often cleaning the speaker deflectors well enough and everything will work as before. True, for this you have to disassemble the phone. If it is under warranty, let the masters from the official service take care of this task;
  • malfunctions in software, glitch, viruses, incorrect settings. Although Apple is famous for its good security and intuitive interface, sometimes the lack of sound is associated with software.

Also, the seven has a double module at the bottom, compared to the six with one speaker

If your iPhone is brand new, you should contact your retailer for a replacement right away. When the speaker does not work on iPhone 6 and older, you will have to do it yourself, since since 2019 the manufacturer no longer supports them.

For your information! If the speakers are out of order, and you need to talk somehow, headphones will come to the rescue. If only the upper module is broken, you can use speakerphone or write SMS.

Apple branded headset transmits sound regardless of speaker operating state

IPhone XR speaker wheezes

You can understand that the speaker wheezes in the iPhone XR due to the presence of debris as follows:

  • Go to settings menu.
  • Go to “Basic”.
  • Go to the item “Universal access”.
  • The switch of interest is located opposite the “Hearing aid”, click on it.

If there are any positive changes, the module is most likely clogged. Cleaning the outside will not greatly improve the situation, you need to clean it from the inside.

It is not recommended to clean the iPhone connectors with foreign objects yourself.

Important! The XR proved to be just as sensitive to the Wi-Fi module. Trying to play sound without it will also be one of the diagnostic points.

Speaker not working on iPhone SE

It is known that only some models of iPhones “suffer” from some malfunctions. In the case of SE, it is recommended to turn off the Bluetooth module and check if there is sound or not. This is a common problem with this particular smartphone, in particular, when updating to iOS 12.3.

What to do if water gets into the iPhone speaker

The first thing to do if your iPhone gets wet is to stop using it and turn it off immediately. The faster you do this, the more likely it is that troubles will be bypassed.

And then the long-proven folk methods come into play on how to dry the iPhone from water:

  • put your smartphone in a jar of rice;
  • leave it on the windowsill in the sun;
  • wrap in a dry towel;
  • dry with a hairdryer;
  • put on the door of an open, switched on oven.

Resuscitation of the “drowned man” must take place in the off state

In variants with warming up the phone, you should not overdo it, but it is better not to do this at all and take it to the master, because it will not work out for sure if the smartphone is completely dry, or there is still water left, and premature switching on will neutralize all the efforts.

Note! In the App Store, you can find special applications that produce sounds at the highest possible frequencies that push moisture out from the inside. But this method can also be dangerous for the module contacts.

The iPhone 7 speaker wheezes

At the time of release, the 7th generation turned out to be very sensitive to various signals from wireless networks. Speaker wheezing can be just one of these manifestations. To accurately identify this problem, it is worth experimenting with connecting one or another standard (2G, 3G, 4G, LTE) in the appropriate settings:

  • Open the settings menu.
  • Go to the “Cellular” section.
  • Next click on “Data Parameters”.
  • Go to Voice and Data.

In case of revealing such a defect, you should change the card of the cellular operator.

Speaker not working on iPhone 5 and 5s

As for the fives, they are rightfully considered eternal. In 2020, they are already 8 years old, and they are still active. For all the time, some particularly frequent situations related to software on these models have not been identified, and due to the time, factory defects are immediately excluded.

The speakers are separated here, so if there is no sound from both modules, it is worth checking for fresh updates (they cannot be updated to the latest iOS) and scan the gadget with an antivirus.

Read more:  How to set up mail on iPhone

If the owner changed the cover and after that the sound disappeared, it is worth trying to reproduce the sound without it. Many Chinese accessories interfere with the full functioning of the smartphone. In other cases, it is worth looking for a hardware malfunction.

IPhones 5, 5S, 6 and 6 Plus are no longer supported, so software crashes do occur

Note! These models are extremely sensitive to temperature changes. Passing from cold to warm, condensation is periodically observed in the deflectors (when the iPhone is hypothermic, it shows a corresponding message).

Top speaker not working on iPhone 6

It was already mentioned above that the holes for the speakers are protected only by a fine mesh. This was the case before the 7th generation iPhones. In new models, the manufacturer began to install a small rubber gasket around the perimeter, which slightly prevents moisture from entering.

On fives and older, problems are rare, but situations when the top speaker on the iPhone 6 does not work is quite common. This is mainly due to constructive nuances. The six is ‚Äč‚Äčthinner, and the sound module is extremely close to the display surface, so oxidation of contacts is a common situation here.

What could be the reason for the breakdown

Sound problems with spoken (high) and low (polyphonic) speakers are fairly common. The main causes of malfunctions:

  • ingress of moisture due to the fall of the smartphone in the snow or flooding with liquid (tea, coffee, juice, water)
  • mechanical impact (shock, falling on a hard surface), causing damage to internal parts (loop, “ear sensor”, microphone, front camera, etc.)
  • dust and debris on the speaker or headphone jack
  • software malfunctions (especially if you install “left” programs on your phone)
  • volume is poorly adjusted
  • manufacturing defects

Problems can manifest themselves in different ways: it is hard to hear when the interlocutor speaks, the iPhone speaker rattles and wheezes, or stops working altogether.

We fix the malfunction on our own

If you stop hearing the other person or he speaks very softly, start by checking the equalizer settings. First, adjust the volume during a call, making sure the indicator is displayed on the screen. Then make sure that no other devices are connected to the phone jacks. Insert and remove the headphone plug several times. Disable Bluetooth function.

To rule out the possibility of a software problem, you should uninstall new, recently installed software and reset all settings. ALGorithm for hard rebooting the device:

  • press the “Home” and “Power” buttons at the same time
  • hold for 10-15 seconds
  • wait for the gadget to restart

If iPhone speaker still does not work (spoken or downstream), restore your system backed up using iTunes. Remember to update iOS regularly to the latest version.

Simple cleaning of hearing and polyphonic speakers from dust often helps. Before performing the procedure, remove the cover and film from the back and front panels, then use a soft-bristled brush, slightly moistened with alcohol or refined gasoline.

If you suspect a factory defect, immediately take your iPhone to an authorized service center or Apple dealer. they should change the internal parts of your model free of charge. Remember. when installing unlicensed software and careless handling, the warranty conditions are violated. Therefore, if you dropped or flooded your smartphone and damaged the speaker (hearing, voice), do not waste time traveling. It is much easier to call an experienced craftsman at home.

Speaker stopped working on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If the speaker on the iPhone does not work for you. it is completely broken or wheezes and rattles during a call. you do not have to go to the service center right away. First you need to try to find the cause of the problem yourself and fix the malfunction at home.

Where to go for help

If you’re having problems with your microphone (bottom left side) or speaker (top, spoken), save time and effort by finding a wizard on youdo.com. Yuda performers will find and fix the breakdown as soon as possible if you are faced with the following situations:

  • the speaker does not work well. it is worse to hear the interlocutor during a call after moisture or mechanical damage
  • rattling sound (when communicating through the voice speaker, when turning on the speakerphone)
  • the sound does not wheeze or tremble. it does not exist at all

Each YouDo performer has been working for many years, has extensive experience in diagnosing and repairing iPhones. Other benefits of performers:

  • leave within an hour to any area
  • provide services without days off and holidays
  • use only new and original spare parts (loops, ear sensors, upper and lower speakers, etc.)
  • repair any model, from 3 to 7

Private traders and companies registered on YouDo guarantee the quality of cleaning, soldering and installation of new components. If the speaker on the iPhone does not work (for example, it broke due to mechanical impact), order the service through Yuda. the master will change the spare part within one hour.

Speaker on iPhone is not working well

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Some users of Apple smartphones are faced with the fact that the speaker on the iPhone does not work well. during a conversation the interlocutor is almost inaudible, a weak sound when listening to music or watching movies. Most often, the cause of the malfunction is contamination of the protective membrane of the speaker and it can be eliminated by cleaning.

However, there are situations when the cause of poor sound during a conversation is damage to the internal components of the phone, and then cleaning the membrane mesh will not be enough to restore good audibility. To understand why an Apple smartphone has poor sound, you need to consider in more detail all the possible causes of the problem.

The main causes of breakdown

If the speaker on your iPhone has become quiet, you should first examine the ear canal. If dust or dirt is found, it must be carefully cleaned. If cleaning the earpiece does not work, then other causes of the failure should be considered. The most common are the following:

  • mechanical damage. poor sound of the phone may be the result of a shock, falling
  • software failure. very quiet sound or no sound at all is often the result of a firmware failure
  • moisture penetration. after moisture gets inside the smartphone, the printed track, board or other components are damaged, as a result of which the user cannot hear the interlocutor

Before deciding to replace the earpiece or earpiece, diagnose your smartphone and follow the recommendations for self-fixing volume problems.

How to fix the problem with the volume of your Apple smartphone yourself?

If your iPhone speaker isn’t working well, you can try to fix the problem yourself. It is possible that the earpiece or earpiece itself is working and the reason for the weak ringing on the iPhone is simply eliminated. Follow these steps:

  • check the iPhone volume level. perhaps during a conversation you accidentally pressed the knob and the volume became lower
  • reboot the device. a small software glitch is eliminated by a forced reboot method
  • check the sound of the iPhone without a case. sometimes it is the protective case that dampens the sound during a conversation
  • use a headset. insert the headphones into the jack and pull them out sharply

If none of the above steps helped and the sound of the subwoofer or ring is still weak, call a professional wizard to diagnose the device. The problem may be due to a broken microphone, oxidized contacts, a kinked ribbon cable, or a malfunction of other components.

Professional smartphone repair

If the sound on your iPhone starts to drop and you are unable to fix the problem on your own, seek help from experienced technicians registered on YouDo. Private technicians will replace the bottom speaker on any Apple device in a short time. The advantages of working with private craftsmen are as follows:

  • inexpensive iPhone repair of any model at home
  • replacement of broken components with original parts
  • departure at a convenient time for you
  • minimum cost of services

As soon as you notice that the sound of the phone has begun to drop and the call on the iPhone is almost inaudible, urgently call a specialist. The wizard will quickly determine why the sound is weak and, if necessary, replace the iPhone speaker with a guarantee for all work performed. Experts know perfectly well why the speaker on the iPhone does not work well, so they deal with the problem in a short time.

Way 5: restart your iPhone

Resetting your iPhone to factory settings means returning your iPhone to its factory state, which allows you to fix settings and troubleshoot related issues if the iPhone speaker is not working.

Go to Settings General Reset.

Select Erase Content and Settings, enter your password and click the Erase iPhone option in the pop-up window.

Set up your iPhone as a new device after restarting iPhone.

Note. This will erase your data and settings on your iPhone, so you’d better back up first.

iPhone recovery using iTunes

If your iPhone speaker is not working due to the phone freezing, then you will not be able to reset the iPhone in the Settings app. You can restore iPhone from iTunes backup as below.

Connect iPhone to computer with USB cable and open iTunes on your computer.

Click the Device icon in the upper left corner after your iPhone is recognized.

Navigate to the left side, and click the Restore iPhone button. Click the Recover button to start recovering your device.

FoneLab iOS System Recovery

FoneLab allows you to transfer iPhone / iPad / iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal without data loss.

Way 7: clean your iPhone speaker

Even the smallest particles of dirt, dust, or debris can be harmful to your iPhone. They can affect the volume and cause your iPhone speaker to not work. Therefore, it is important to keep all parts of the speaker clean by using a cotton swab to easily clean the speaker.

why is the iPhone speaker not working

Generally speaking, there are two reasons related to iPhone speaker not working.

First, if the software is malfunctioning, your iPhone may not be sending the correct signals to the speaker. As a result, the speaker does not work at all. The good news is that most software problems can be fixed.

When it comes to hardware issues, that’s a different story. Your iPhone speaker is one of the most vulnerable components on an iPhone. If it’s damaged, your iPhone speaker won’t work completely. In this case, you will have to fix it in the Apple Store.

Read more:  Where Did The Photos From The Iphone Go?

FoneLab iOS System Recovery

FoneLab allows you to transfer iPhone / iPad / iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal without data loss.

When you find your iPhone speaker is not working, download and install iOS System Recovery on your computer. Launch it and your iPhone will be detected as soon as you connect it to your computer with a USB cable.

Click the Start button on the interface to start troubleshooting. Select Standard Mode or Advanced Mode based on your iPhone’s situation, and confirm the information on your device.

Then click Optimize in Standard Mode or Repair in Advanced Mode to download the appropriate firmware. Once downloaded, the software will fix the problem such as stuck in headphone mode.

make sure the iPhone is not stuck in headphone mode

If your iPhone speaker doesn’t work after using headphones, your handset may get stuck in headphone mode. How do you get out of your iPhone’s headphone mode? FoneLab iOS System Recovery is the desired tool to recover iPhone from DFU mode, recovery mode, Apple logo, headphone mode and more.

  • Fixes software issues on iPhone, including headphone mode and more.
  • Repair iPhone in Recovery Mode or DFU Mode.
  • Keep your data and settings on your iPhone intact.
  • Compatible with all your iPhones running iOS 13/12/11 and earlier.

Way 1: make sure the iPhone is not quiet

The Mute button is on the top or side of the iPhone. If you see orange, it means your iPhone is in Quiet Mode. Move it to the other side and adjust the volume using the Volume Up and Volume Down buttons. Then your iPhone speaker should work fine. As for the latest version of iOS 13, you can find Quiet Mode On or Quiet Mode Off On-Screen Alert.

Speakers and fluid

Water or other liquid is categorically contraindicated in any technique. Until Apple indicates that the iPhone is IP68 compliant, it cannot be considered fully protected. Indeed, if liquid gets inside the device, the warranty repair will be refused.

You cannot clean iPhone speakers with any liquid.!

Even the oldest iPhone can handle a few drops of rain or small splashes. You just need to quickly remove moisture with any soft cloth.

  • use any dry wipes and rags to wipe monitors or glasses;
  • wipe off the liquid with a dry kitchen or toilet towel;
  • blot a drop with the corner of your clothes if nothing more suitable was found.
  • use paper napkins, towels or toilet paper (wood particles in the composition can leave small scratches);
  • wipe it on clothes (you can touch the body with a zipper or a button);
  • try to blow off or shake off the drops (water can get even deeper inside the device, and the wet smartphone itself can slip out of your hands).

serious precautions are needed after severe wetting. Wipe down the housing and openings immediately as described above. Now you have to wait until the moisture trapped in the connectors dries.

Never dry the device with a hairdryer, in the sun or in a heating device.

So you can easily ditch the battery, overheat the elements that are sensitive to temperature changes, destroy the glue and sealing substances inside the case.

If the iPhone turns on after drying, it’s too early to rejoice. You will have to make a visit to the service center. Even the smallest amount of moisture in the case, when dry, can leave a deposit of salts, impurities and other particles on the elements.

Over time, this plaque will corrode and destroy the components of the device. Then it will only get worse, you can get to expensive repairs or the device is recognized as completely unrepairable.

It’s better to spend half an hour of time and drop into the service center, so you will be calm that everything is in order with the iPhone inside.

Banal cleaning

The most common cause of sound degradation is dust and dirt getting into the process connectors. It gets there when worn in s or a bag. Sometimes it can be seen with the naked eye.

To remove dirt yourself, you need to be very careful.

  • use a toothbrush to remove dirt and debris;
  • try to remove dirt with a soft brush;
  • try to remove dust with tweezers.
  • use a variety of liquids and sprays to clean the speakers;
  • use needles, paper clips, toothpicks;
  • blow off the device yourself or use compressed air cylinders.

Any liquid can get inside and cause irreversible processes from oxidation of contacts to failure of parts and components of a smartphone.

Sharp objects can damage the protective structure and the speakers themselves, as can compressed air.

Even on an iPhone 7 with a waterproof case, you shouldn’t use harsh cleaning agents (liquids, cleaning agents, compressed air). In addition to the chance to damage the speakers, you can also break the waterproof insulation layer.

Checking the settings

First, the most basic set of measures for diagnosing sound quality.

Make sure that Do Not Disturb (Settings. Do Not Disturb) and Silent Mode (switch on the side of the iPhone) are disabled.

Reboot iPhone and set the sound level to maximum.

Disable Bluetooth if other accessories are paired with it.

We check the sound in the standard applications Music and Phone or a problematic program, where we noticed a deterioration in sound.

MYTH: Many people think that European iPhones have quieter sound to meet EU standards. Yes, European smartphones have such a limitation (Settings. Music. Volume Limit), but it only concerns the sound volume in the connected headphones.

Why the iPhone has become quieter

It is unpleasant when, after a certain time, you begin to notice a deterioration in sound quality. Speakers can wheeze, hiss, produce noise and clicks. This applies to both the earpiece on the front panel and the external one on the bottom of the smartphone.

What else could there be

It happens that the sound of the speakers deteriorates for another reason, dust or moisture is not to blame here. Speakers can be damaged if iPhone is unsuccessfully dropped on a hard surface. Even if no impact marks are left on the outside, components inside may be damaged.

The speaker may turn out to be defective at all. For the first few months, it regularly produces a sound, and then it gives up abruptly and begins to wheeze.

In both cases, it is better not to postpone the matter in a distant box and take the gadget for diagnostics.

And if you fumble in iPhones and Macs, have experience in a service center. contact the guys at FruitFix, they are just looking for smart craftsmen.

Why does not it work?

All iPhone models are equipped with an earpiece and a polyphonic one for playing music and ringing. For example, if the sound does not work on the iPhone, you need to understand which one has become unusable. There are many reasons when a speaker on an iPhone breaks down, here are the most common:

  • Water got into the polyphonic or earpiece speaker
  • Mechanical damage to the phone
  • Overheating and subsequent peeling of the microcircuit responsible for encoding the audio signal, it may be because of this that you lost sound on the iPhone.
  • Falling iPhone from a great height on a hard surface, as a result, again a problem with the microcircuit.
  • Software bugs iOs, applications, or common system glitches

As a consequence of the speaker not working on the iphone 5, the sound on the iPhone does not work But it is necessary to clarify, since the upper and lower loudspeakers are installed in the phone, each is responsible for the reproduction of different sounds. To find out which of them has become unusable, especially if water gets into the phone, we carry out the simplest tests, by analogy with microphones.

Symptoms of a Top Speaker Malfunction

  • Sound is not played during conversation
  • Noises, crackling, distortion of the voice when talking
  • You can hear me in the FaceTime app, but I can’t hear the other person.

How to troubleshoot?

Only the simplest and most obvious problems can be eliminated on your own when the conversational or lower speaker does not work.

  • Examining the iPhone case for contamination
  • We remove the cover and clean the microphone holes and the non-working speaker on the iPhone (which one is not working, we took it apart in the previous section)
  • We clean the nets, covering from dust and dirt, technical holes
  • We insert the working headphones into the 3.5 mm jack located next to the charger and carefully remove it. We repeat the procedure up to 10 times, perhaps the audio codec is frozen.
  • We are trying to restart iPhone, how to do it read in the article How to restart a frozen iPhone.
  • In the most difficult case, we reset the settings to the factory settings. This erases all applications and user settings, in 10% of cases, the problem lies precisely in this.

Broken sub speaker

After you have received an understanding of the problem, you need to try to fix them yourself, without the help of paid masters from service centers. If, when communicating with the interlocutor, you hear crackling, interference and stuttering, most likely there is something with the connection, but not always. This may be caused not by the fact that the conversational or music speaker does not work, but a problem with the audio codec, a small microcircuit, in the bowels of the phone.

What to do if speaker on iPhone is not working properly?

According to statistics, 25% of users face this problem. With the release of new models from Apple, the problem when the speaker does not work on a seemingly reliable device like a tank will only get worse.

Question answer

Most likely, the liquid got into the device, and this is already more difficult to eliminate, read about this in the article what to do if the phone falls into water?

The same as with water ingress, read here. But in this case, it will be much more difficult to clean everything, get ready to replace the loudspeaker or speaker.

Yes, it will do, the methods will work successfully for iphone 4s, iphone 5s, iPhone 6 and even for the 7 series.

iPhone 7 Upper Ear Speaker Not Working (How To Fix)

This is a question for technical support, no comments here.