iPhone 7 display button on screen

Table of Contents

How to fix the problem. the sensor is pressed by itself

Tenorshare ReiBoot is a free program that will solve all freezes and problems associated with iOS 11/12, including freezes when updating, freezes on an Apple, freezes in recovery mode, freezes in DFU mode, constantly reboots, screen unexpectedly glitches and does not turn on and much other. All in all, Tenorshare ReiBoot allows you to fix freeze on iPhone XS / XR / X / 8/7 Plus / 7 / SE / 6 Plus / 6s / 6 / 5s / 5.

The iPhone display is pressed by itself. Tenorshare reiboot

First, you need to download and run the program on your computer. And connect the device to the computer via a cable.

By clicking “Enter recovery mode”, you can fix the smartphone screen itself is pressed using recovery mode.

Next to get the device out of recovery mode and solve iPhone 6 spontaneous display presses. you need to hold down the “Exit recovery mode” button

Besides, the program can fix other problems, iPhone stuck on Apple. the display is unresponsive, the battery is running low, the sensor has stopped working, iOS 11 has turned the iPhone / iPad into a brick, the iPhone is disconnected, connect to iTunes, reset the iPhone to factory settings. You can conveniently use this program on Windows and Mac.

There are several ways to make the iPhone or iPad display behave correctly and not live its own life. You can install it yourself without a third-party application.

Keyboard buttons pressed. reboot

A hard reboot is the easiest way to push by itself. You need to press and hold the Power and Home buttons together at the same time; for iPhone 7, you need to hold the Power and Volume buttons until an Apple appears. Then release the two buttons while your gadget reboots. iPhone lives its own life and does not respond to pressing. this breakage is resolved!

iPhone 5/6/7 itself presses the screen and buttons

The phone randomly began to press itself at the top of the screen. I removed the film, everything went, pasted another one, it seemed to work again, then again, the same, then the upper part of the screen about 1 cm stopped responding to touch. I disassembled and found out if you do not lean the sensor against the screen, then it does not press itself. Tell me how to solve the problem, maybe someone had a similar or similar situation?

Users on iPhone, iPad and iPod are offended by the fact that the touchscreen itself is pressed on the screen and buttons, and after updating to iOS Beta, the touch stopped working. Today we will find out why the iPhone sensor hangs and is pressed by itself, and how to fix this nuisance for iPhone 5/6/7.

Fix sensor working by itself via iTunes

Flashing is a common way to fix the problem with the touchscreen by restoring iPhone, iPad. But all information will be erased, before this action, a backup was made in advance.

Using iTunes, the first thing to do is connect your iPhone to it. And it should open the main page of managing your iPhone, iPad. You can see on the top plate with information “Restore” by clicking it. And iTunes automatically updates the device to the latest version. After restarting the iPhone, the screen will stop working by itself.

If all does not help, then you need to contact the service center and replace it with a new display. And I would like to receive useful advice, do not hesitate, write to us!

Virtual Home button on iPhone screen

Sometimes you can see a virtual Home button on the screen of iPhones and iPads. This button is called. AssistiveTouch, it is an auxiliary element of the iOS operating system. Often used as a replacement for the physical Home button and other iPhone buttons. Looks like a white circle in a dark square with oval corners.

When this virtual button is turned on and used on the screen:

  • Used by people with disabilities.
  • If one of the physical buttons located on the iPhone case fails or starts to junk, then this button is often turned on, and thus displayed on the iPhone display.
  • After the physical button was repaired in a service center, or made in a workshop, then out of habit, some people continue to use the Home button added to the screen.
  • There are people who install an on-screen button on the iPhone, just for convenience, for example, it is more convenient for someone to remove the Control Center (to quickly turn on the Internet), some use this AssistiveTouch to soft restart the iPhone, etc. In general, until you try it yourself, you will not understand whether you need it.
  • Wouldn’t be surprised if someone just doesn’t want to expose normal buttons to wear.

What is Assistive Touch. Which iPhone models support

The ability to bring the Home button to the screen, first appeared in the iOS 5 firmware, respectively, based on this post, it becomes clear that you can make a virtual button on the screen in the following models:

  • iPhone 3gs
  • iPhone 4, 4s
  • iPhone 5, 5s, 5c, 5se
  • iPhone 6, 6s, 6 Plus
  • iPhone 7, 7s, 7 Plus
  • iPhone 8, 8s, 8 Plus
  • iPhone X (especially relevant)
  • Other new models

Once the Home button is on the screen, you need to know the basics of how to use it. In standby mode, the button is semi-transparent, when dragged and used, it darkens, when you press on the screen. 3D Touch (not in all iPhone models) increases in size.

After switching on, press the Home button on the screen, a widget with substitutes for physical buttons and icons with additional features will appear, by climbing on them you can select the necessary functions, we managed to rotate the screen to its normal position. How to customize your personal widget and other settings, see here. Setting up AssistiveTouch.

Now you know what Assistive Touch is.

Displaying the Home button on the iPhone screen. where and how

Using the instructions below, you will be able to display a virtual button on the display:

  • Launch the standard Settings application and select. Basic
  • Looking for. Universal Access
  • Choosing. AssistiveTouch
  • Turning on the green marker. AssistiveTouch

We just put the Home button on the iPhone screen, now you can drag it to any edge or corner of the display, thus placing it in a convenient place for you.

How to remove virtual button from iPhone screen

Some iPhone owners with a button pulled out on the display cannot turn it off and can only solve the problem by completely resetting or flashing iOS in iTunes. But if you don’t need the button on the screen, you don’t use its functions, then this button can be disabled in the AssistiveTouch settings:

  • Settings. General. Accessibility. AssistiveTouch. turn off the AssistiveTouch switch

The button will no longer appear on the iPhone screen.

Transferring a button to the screen and its settings, calibrating

You can display the “Home Button” button on the screen of a smartphone or tablet with an iOS operating system in the “Accessibility” section, where Apple developers have collected a colossal number of technologies and functions that make life easier for users with disabilities (and some parameters of other technologies, such as 3D Touch, Siri and Face ID). You can get to the section through the settings:

    To be more precise, through the “Basic” menu item;

In the opened “Accessibility” it is important to find the thematic panel “Interaction” and go to the AssistiveTouch settings;

First of all, the function will have to be enabled by moving the slider to the active position;

The final touch is to configure the required set of features by looking into each set of parameters;

  • For example, in the “Top Level Menu” they are allowed to change the number of available icons, and the location of the buttons, and the sections to open. Anyone can set up access to Siri and the transition to control points and other sections. If there is too much of everything, the changes made allow the “Reset” button of the same name;
  • Also, developers from Apple propose to configure how to interact with the button. if a single press opens the menu, then if you double-click, you can quickly block the device or immediately call SOS;
  • If for some reason the AssistiveTouch icon at rest looks too bright and strongly interferes with interaction with the operating system, then it’s time to configure the “Visibility at rest” option. 40% is usually sufficient;
  • By the way, here you can come up with your own gestures to interact with the system. The technology works fine, but problems may arise with the settings. the system is not able to count all touches correctly.
  • Using AssistiveTouch with 3D Touch

    On iPhone 6s and up, the virtual key responds to 3D Touch presses. AssistiveTouch will perform different actions depending on the degree and strength of the touch. What kind? Depends on the settings. All gestures can be configured in the same “Basic” menu, in the “Accessibility” panel.

    From the extensive list of available actions, you can choose any. even multitasking, even quick commands or a screenshot. For unknown reasons, developers do not allow adjusting the depth of touch. only one action with 3D Touch is selected at maximum pressure (no “half” or “light” touch will work, which is a pity. so the range of powers would become even wider!).

    Why display the home button on the screen what is AssistiveTouch?

    The virtual Home button, as an auxiliary part of the iOS operating system, performs several tasks at once:

    • Simplifies life for users with disabilities;
    • Allows, at least for a while, but to abandon the physical button located on the iPhone or iPad case, in cases when it breaks down, junk or malfunctions, needs repair or does not affect the system during use;
    • Provides access to Siri, Apple Pay and additional menus without using the Power button located at the top or right;
    • Helps to keep the device in its original form, literally refusing to interact with the case. Surprisingly, it’s easy to relearn how to interact through the screen. And, as practice shows, in Asian countries, “Power” or “Home” are saved from constant wear and tear. Is it really possible to save oneself from having to pay for repairs. that is another question. It is unlikely that Apple equipment, if properly used, will not withstand 3-4 years of stable pressing of the buttons located on the case;
    • AssistiveTouch is available on all Apple smartphones starting with iPhone 3GS.
    Read more:  Full Reset Iphone 6 Forgot Icloud Password

    We display the home button on the iPhone screen and set it up in a few seconds

    AssistiveTouch is a kind of Apple technology control center that allows you to translate the “mechanical” interaction with a smartphone or tablet into a touch-based view. You don’t have to worry about the buttons. and block the device, and “shake” and scale. from now on, each individual action depends solely on the pre-configured menu of gestures. Bring home button to iPhone screen is easy.

    AssistiveTouch features

    The virtual button located on the screen is almost omnipotent. it opens access to the voice assistant Siri, locks and rotates the screen, change the sound volume, put your smartphone or tablet in silent mode, take a screenshot and display an extensive multitasking panel, watch recent notifications. Each individual action is located in pre-designated thematic sections, which, of course, can be changed and customized at the first request.

    If the listed possibilities are too few, then you should immediately turn to the settings and expand the powers of the screen assistant. even imitation of some interactions with the device will not be a problem. so, for example, with one click you can depict shaking or spreading your fingers to zoom out or enlarge the image.

    How to remove a button from the screen

    If AssistiveTouch technology has ceased to bring at least some benefit, then it’s time to return everything to its previous state, repeating the instructions already described above almost exactly, changing only the position of a kind of checkmark from “green” to “gray”:

    iphone, display, button, screen

      Go to “Settings”, open the “General” menu;

    Find “Accessibility”, and then, by scrolling to the “Interaction” section, find the already familiar item;

    The last step is to deactivate the slider, save the changes;

  • And one more thing. it is not at all necessary to return everything to the original settings, perhaps AssistiveTouch will still come in handy in the near future, and all gestures, taps and technology will remain in an already optimized and perfected order.
  • Touch interaction in AssistiveTouch

    Recently, developers from Apple allow you to come up with and add your own screen gestures that perform certain and pre-prepared actions (some complex combinations, unfortunately, are not yet allowed. you cannot start several applications at once or initiate a complex aLGorithm of actions, users only have the basics “, Such as vertical scrolling, swipes and taps in certain areas).

    Gestures are created in the AssistiveTouch settings menu. it is there, in any sequence and for any time you want, that you can “assemble” a new action by drawing a line, circle or triangle on the screen. It all depends on the specific goals that the gesture and fantasies must fulfill. When the work on the gesture is completed, the resulting movement can be added to the “Favorites” item, which is called by the usual, one-time touch of the virtual button. From there, gestures are reproduced at any necessary moment (in fact, the system only simplifies monotonous actions, you should not wait for complex aLGorithms from a standard screen assistant. through AssistiveTouch you cannot create a bot capable of mining experience and gold in any MMORPG. you can only dream of this ).

    When needed

    The first step is to understand in what situations it is necessary to display the Home button on the screen. It’s no secret that this control element in the smartphone is provided in the form of a separate physical button. It is made of glass, so some believe that the component will not work for a long time on the iPhone.

    How to display the Home button on the iPhone screen: tips and tricks

    In today’s world, many people buy Apple products. For example smartphones. They are called iPhones. This device offers the owner a variety of control options. Here’s how to display the Home button on the iPhone screen. Why might this operation be required at all? These questions are actually easier to answer than they seem.

    Programs

    Now, in order about each of the options. You should start with programs. This method is not used very often in practice, but it does take place. Eliminates many problems.

    How do I display the Home button on my iPhone? To do this, you need to download, install and run a special program. Nothing else is needed. The performed actions display the Home button.

    Which application will help bring your idea to life? Best is to use Menu Button Emulator. It does not require additional costs. As already mentioned, with its help, you can easily deal with the task at hand.

    Withdrawal methods

    An important nuance is the choice of the method for bringing the Home button to the smartphone display. Modern subscribers can act in several ways.

    • use specialized programs;
    • use system settings.

    For older versions of iOS, only the first sentence is relevant. Therefore, if the subscriber is thinking about how to display the Home button on the iPhone screen, do not be afraid of third-party programs. But in new versions of iOS, hardware settings are mainly used.

    Smartphone settings

    How to quickly display the Home button on the iPhone screen? This can be done using the mobile phone settings. It should be noted that this scenario is relevant only for iOS 7 and newer versions of operating systems. In early builds, only additional applications will help.

    How to display the Home button on the iPhone screen? It is enough to use an option called Assistive Touch. She displays a small Home button on the display of the gadget, which begins to work together with her physical interpretation.

    To use this technique, you must:

    • Turn on your mobile device. Be sure to wait until the gadget is fully loaded.
    • Go to the “Settings” section. “Basic”. There you need to open the “Accessibility” menu.
    • Find and click on Assistive Touch.
    • Switch the switch to “On”.

    That’s all. Now it is clear how to display the Home button on the iPhone screen. You can remove this control in the same way. Nothing difficult, incomprehensible or special.

    In practice, it is the second scenario that occurs most often. After all, the bulk of users use iOS 7 and above.

    How to press the Home button on the iPhone screen

    Now, a few words about how to press the Home button using the iPhone screen. To do this, you need to click on the floating button of the “Assistive Touch” function. As a result, a menu of several items should appear on the screen. Among other things, there will be a Home button. Click on it and your iPhone will react as if you pressed a hardware button on the body of the device.

    If suddenly your menu does not have a Home button, then return to iPhone Settings and open the section “General. Accessibility. Assistive Touch. Top Level Menu”.

    Here you can customize which options are available in the Assistive Touch menu. To add a Home button, click on any of the available options.

    And in the list that opens, select the “Home” button.

    Here you can also reset the “Assistive Touch” settings or increase the number of available options.

    How to enable Home button on iPhone screen

    If you want to display the Home button on the screen of your iPhone, then for this you need to go to the settings and turn on the “Assistive Touch” function there. To do this, open the “Settings” application and go to the “General” section.

    Next, you need to open the subsection “Universal Access”.

    And go to the “Assistive Touch” settings.

    Here, at the very top of the screen, you need to activate the switch, which is responsible for turning off and on the “Assistive Touch” function.

    After enabling the “Assistive Touch” function, a floating round button should appear on the screen, which will look something like the screenshot below.

    The appearance of this button means that the “Assistive Touch” function is enabled and can now be used to control the iPhone without using hardware buttons, such as the Home button.

    How to display the Home button on the iPhone screen

    The breakdown of the Home button is not a common phenomenon, however, when this happens, the user is practically deprived of the opportunity to fully use his iPhone. Indeed, without this button, it is impossible to return to the home screen, close applications, switch between running applications and perform many other operations.

    The surest solution in such a situation is to contact the service center. But, there is not always time and money to repair your favorite gadget. Sometimes you need a phone right now, but it doesn’t actually work. In such a case, there is a temporary solution. You can bring the Home button to the iPhone screen and press it using the touchscreen.

    You can use this method on any iPhone model that has been updated to iOS 5 or higher. And these are such models as iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

    What else you can do with Assistive Touch

    Assistive Touch is a feature designed primarily for people with disabilities. As already mentioned, with its help, you can display the Home button on the iPhone screen and press it without using a real hardware button on the case. But apart from this, “Assistive Touch” provides a lot of other possibilities. For example, you can use it to:

    • Open the list of notifications or Control Center;
    • Emulate the use of gestures and device shaking;
    • Control the sound volume;
    • Enable screen lock;
    • Turn on screen rotation or orientation lock;
    • Take screenshots;
    • Manage multitasking;
    • Use the camera as a magnifying glass;

    How to display the Home button on the iPhone screen

    Sometimes iPhone and iPad users need a virtual home button. This button is called Assistive Touch. As an accessory to the iOS OS, it often comes to the rescue when the physical Home button or some other button fails.

    This tool is used in such cases as:

    • The owner of the gadget is a person with disabilities;
    • There is a problem with any button on the case (in most cases, such incidents occur with the Home button);
    • After repairing the physical button, the owner of the iPhone or iPad already uses Assistive Touch out of habit;
    • Some people put a virtual Home button on the screen for convenience, someone prefers to quickly go to the Control Center in this way or use it for a soft reboot of the system, here it is a matter of taste;
    • There are cases when the user uses a virtual button in order to avoid wear and tear on regular buttons.

    How to set home button on iPhone screen

    Setting up a virtual Home button does not take much time. Follow these guidelines, which include:

    • Go to the “Settings” menu, then select the “General” item, then go to “Universal Access”;
    • Select the Assistive Touch item and enable the virtual button using the slider, which will turn green;
    • Now the shortcut we need has appeared on the screen, which will allow us to use all the necessary functions. Assistive Touch also allows you to move the button to a convenient location on the iPhone screen.

    How do I use Assistive Touch? Which iPhone models support this feature?

    The system allows you to customize the home button in versions of iPhone from 3gs up to iPhone X.

    When the Home button is activated, you should familiarize yourself with its basic functionality. In rest mode, it is translucent, and when dragged, it becomes noticeably darker, thereby allowing the user not to pay attention to it in moments when there is no need for it.

    If you click on Assistive Touch, a window will appear with all its functionality, among which you can select the most necessary.

    How to remove the virtual Home button from the iPhone or iPad screen

    Sometimes the user of an Apple gadget can get confused and instead of disabling this function in the settings menu, he decides to completely reset the settings or is completely flashing iOS. To disable the Home button, you need to take the following simple steps:

    • Go to the “Settings” menu, select the “General” item;
    • We select “Universal access, then” Assistive Touch “, after which we disable this function using the slider, which, when deactivated, will turn gray.

    How to Get Home Button on iPhone Screen

    • From now on, the Home button is missing on the screen of your iPhone.

    Although the virtual button “Assistive Touch” can completely replace the physical button “Home”, this does not mean that you can wait to repair the device. If the gadget is under warranty, the user should go to the service center immediately. otherwise he runs the risk of saying goodbye altogether to the hope of free elimination of the defect.

    Read more:  How to make an iPhone for a kid

    If suddenly the Home button breaks and stops responding, you can continue to use your iPhone or iPad by displaying the virtual Home button using the Assistive Touch function.

    There are several reasons why the Home button on an iPhone or iPad might not work. Older iPhones and iPads (up to the iPhone 7) have physical buttons that wear out over time, while the iPhone 7 has a touch button that won’t work without skin contact. Whatever the reason, if you’re having trouble with the Home button or just don’t want to use it, you can turn on the little-known Assistive Touch feature to bring the Home button to your iPhone or iPad.

    How to set up quick access to “Assistive Touch”?

    You can adjust your iPhone so you don’t have to navigate through the settings to launch Assistive Touch. Here’s how to do it:

    Go to the “Accessibility” section in the main settings of the gadget and scroll the screen to the very end. Below you will see the subsection “Keyboard shortcuts”.

    iPhone 7 / 7 Plus: How To Enable Touch Screen Home Button (Assistive Touch) For iOS 13

    In the subsection “Keyboard shortcuts” check the box next to “AssistiveTouch”.

    After that, you can call the “Assistive Touch” menu launch button by triple pressing the physical “Home” key and hide it in the same way.

    How to use Assistive Touch?

    First of all, you need to place the function menu start button in a convenient place. You can move it along the screen frames by holding it with your finger. You can’t place a key in the center of the screen.

    Having decided on the location of the button, click on it. You will see a menu like this:

    At the bottom of the menu there is a virtual Home button displayed on the screen. The functionality of the virtual button is 100% consistent with the functionality of the physical one. in particular, a long press on it will launch Siri.

    There are other options in the Assistive Touch main menu:

      Notification Center. allows you to call the screen with notifications. The traditional way to bring up this screen is by swiping from top to bottom. Voice control is another way to “wake up” Siri. Control Center. Allows you to display a menu for quick control of some of the iPhone’s functions. Pressing this key actually replaces the bottom-up swipe. Favorites. Through “Favorites”, you can activate gestures that the user has created independently. To start creating a new gesture, go to “Favorites” and click on any of the squares with a “” inside.

    Also in the main menu “Assistive Touch” there is a button “Apparatus”. By clicking on it, you will be taken to a submenu, where you will find on-screen keys that allow you to perform actions such as locking / rotating the screen and changing the volume of the device.

    With the help of “Assistive Touch” you can even take a picture of the iPhone screen. for this, in the function menu, go along the path “Apparatus”. “” and click on the “Screenshot” button. It is worth photographing only static images in this way, because the on-screen element is triggered with a significant delay.

    On devices running iOS 9, the “Assistive Touch” main menu is customizable. In particular, users are able to increase the number of icons in the main menu up to 8 pieces.

    How to remove the Home button from the device screen

    To remove the button from the screen, you must follow steps 1-4 from the previous instructions, and then turn off the AssistiveTouch function. Done, the button will automatically disappear from the screen.

    Disable AssistiveTouch

    If the Home button on the device is broken and there is no way to fix it, you can bring it to the screen. This can help a lot when using a faulty phone or tablet, but it is still not very convenient, since the button will have to be constantly moved around the screen. However, you can remove it at any time by deactivating AssistiveTouch.

    Until the user goes to the workshop to repair the broken Home button, he can control the device using software emulation of this key. The virtual Home button is very convenient and will definitely not fail.

    On iPhones, there is only one physical navigation button. the Home button, which is located in the middle below the screen. This key allows you to minimize applications, call the virtual assistant Siri and perform many other necessary actions. It becomes almost impossible to control the gadget without the “Home” button. but what if it is out of order??

    Fortunately, Apple has provided the ability to display the Home button on the iPhone screen. You will learn how to do this by reading this article.

    How to display the home button on the iphone screen

    Apple devices have a great feature that can help many users. bringing the physical Home button to the phone or tablet screen. This function is able to fully replace the main Home button when it fails.

    How to display the virtual Home button on the iPhone or iPad screen

    • Go to Settings.
    • Click Basic.
    • Click Accessibility.
    • Click AssistiveTouch in the Interaction category.
    • Press the toggle switch to turn on AssistiveTouch.
    • A small rounded rectangle with a circle in the middle will appear on the screen.
    • Click on it to launch AssistiveTouch controls.
    • Among these controls you will find a virtual Home button.

    When you need to display the Home button on the screen

    The need to display the Home button on the screen of an Apple device may arise for several reasons:

    • The main button is broken, worn out. This happens with used phones and tablets. So if there is no way to take the device to the service for repair, then one thing remains. move the button.
    • Also, this function can be used in the event that you want to stop using the physical button so as not to break or damage it.
    • Breakage is optional: perhaps, for some reason, it is more convenient for the user to press the button on the screen than on the case.

    How to use Assistive Touch?

    First of all, you need to place the function menu start button in a convenient place. You can move it along the screen frames by holding it with your finger. You can’t place a key in the center of the screen.

    Having decided on the location of the button, click on it. You will see a menu like this:

    At the bottom of the menu there is a virtual Home button displayed on the screen. The functionality of the virtual button is 100% consistent with the functionality of the physical one. in particular, a long press on it will launch Siri.

    There are other options in the Assistive Touch main menu:

      Notification Center. allows you to call the screen with notifications. The traditional way to bring up this screen is by swiping from top to bottom. Voice control is another way to “wake up” Siri. Control Center. Allows you to display a menu for quick control of some of the iPhone’s functions. Pressing this key actually replaces the bottom-up swipe. Favorites. Through “Favorites”, you can activate gestures that the user has created independently. To start creating a new gesture, go to “Favorites” and click on any of the squares with a “” inside.

    Also in the main menu “Assistive Touch” there is a button “Apparatus”. By clicking on it, you will be taken to a submenu, where you will find on-screen keys that allow you to perform actions such as locking / rotating the screen and changing the volume of the device.

    With the help of “Assistive Touch” you can even take a picture of the iPhone screen. for this, in the function menu, go along the path “Apparatus”. “” and click on the “Screenshot” button. It is worth photographing only static images in this way, because the on-screen element is triggered with a significant delay.

    On devices running iOS 9, the “Assistive Touch” main menu is customizable. In particular, users are able to increase the number of icons in the main menu up to 8 pieces.

    How to display the Home button on the iPhone screen?

    Until the user goes to the workshop to repair the broken Home button, he can control the device using software emulation of this key. The virtual Home button is very convenient and will definitely not fail.

    On iPhones, there is only one physical navigation button. the Home button, which is located in the middle below the screen. This key allows you to minimize applications, call the virtual assistant Siri and perform many other necessary actions. It becomes almost impossible to control the gadget without the “Home” button. but what if it is out of order??

    Fortunately, Apple has provided the ability to display the Home button on the iPhone screen. You will learn how to do this by reading this article.

    How to enable “Assistive Touch”?

    Assistive Touch allows you to display the Home button on the iPhone screen. This function is intended for people with disabilities, but it is more often used by owners of gadgets with faulty physical keys.

    The Assistive Touch function is especially popular among Chinese users. in the Middle Kingdom, almost half of iPhones are controlled “from the screen”. Practical Chinese argue that this method of control is not only more convenient, but also prevents wear and tear on the physical buttons.

    How do you set up Assistive Touch? It is enough to perform a few steps:

    Go to “Settings” and follow the path “General”. “Accessibility”.

    In the “Accessibility” section, find the “Interaction” block. It will have a subsection “Assistive Touch”. go to it.

    iphone, display, button, screen

    Toggle the Assistive Touch slider to the active position.

    A translucent square with a white circle inside will appear on the screen. the menu launch button.

    This means that the “Assistive Touch” function is activated and you can control the gadget without resorting to physical keys.

    “Assistive Touch” can be enabled on any Apple device with iOS version higher than 5.0.

    How to remove the Home button from the iPhone screen?

    Deactivation of the “Assistive Touch” function is performed in the same way as activation. You just need to follow on the iPhone along the path “Settings”. “General”. “Accessibility”. “Assistive Touch” and switch the toggle switch of the same name to the inactive position.

    The square with a white circle inside will disappear from the screen.

    How to set up quick access to “Assistive Touch”?

    You can adjust your iPhone so you don’t have to navigate through the settings to launch Assistive Touch. Here’s how to do it:

    Go to the “Accessibility” section in the main settings of the gadget and scroll the screen to the very end. Below you will see the subsection “Keyboard shortcuts”.

    In the subsection “Keyboard shortcuts” check the box next to “AssistiveTouch”.

    After that, you can call the “Assistive Touch” menu launch button by triple pressing the physical “Home” key and hide it in the same way.

    Although the virtual button “Assistive Touch” can completely replace the physical button “Home”, this does not mean that you can wait to repair the device. If the gadget is under warranty, the user should go to the service center immediately. otherwise he runs the risk of saying goodbye altogether to the hope of free elimination of the defect.

    How to unlock iPhone without pressing a button?

    How to unlock iPhone or iPad with one tap without pressing the Home button (for iOS 13 and newer)

    • Open the “Settings” application;
    • Go to the section “Accessibility” → “Home button”;
    • Activate the “Swipe to open” option.

    How to display the Home button on the iPhone 7 screen?

    Displaying the “Home” button directly on the screen of the iOS device!

    • Go to the iPhone or iPad settings. open the main ones. universal access.
    • Almost at the very bottom of the list, we find the item. AssistiveTouch, go into it and activate the function by moving the slider.

    How to customize the home button on iPhone 6?

    • To customize accessibility shortcuts, go to Settings Accessibility Shortcuts and choose the features you use most.
    • To use the quick command for accessibility, press the Home button three times.

    How to Display Home Button on Samsung Screen?

    How to set the application screen button

    • Go to the “Settings” menu.
    • We select “Display”. “Main screen”.
    • We find the item “Application screen button”.
    • Select “Show Application Screen Button”, and then click “Apply” at the top right.

    How to disable the home button on the screen?

    How to remove the home button from the iPhone screen?

    • Go to “Settings”.
    • Item “Universal access”.
    • Further to the item “Touch”.
    • Find the item “AssistiveTouch”.
    • Turn it off.

    How to add a home button to your screen?

    We go along the path “Settings”. “System”. “System navigation”. Open the navigation button settings. Now you need to move the toggle switch to the inactive position, after which “Home” will no longer appear on the screen of the Android device.

    How to lock the screen on iPhone?

    If you haven’t already turned on AssistiveTouch first, go to Settings. General. Accessibility. AssistiveTouch. Next, in the AssistiveTouch menu, find 3D Touch. In the list that opens, select Lock Screen. Done!

    Read more:  Setting up Airpods pro on iPhone

    Home Button Advantages and Disadvantages

    The home button on the iPhone 8 and other touchscreen versions of the smartphone has both pros and cons. The benefits include:

    • significant reduction in the likelihood of breakage of the mechanism, thanks to the installation of a touch key.
    • there was an option to adjust the force of pressing, which makes it possible for any user to adapt the operation of the Apple phone to their preferences.

    The disadvantages include the fact that the touch button on the iPhone 7 works only from interaction with the skin of the fingers without gloves. This can be difficult for users living in the northern regions.

    How to customize the Home button on iPhone 7, 8

    The home button on iPhone is the most used key. Every user should know how to customize the home button on iPhone 7 and other iPhone models. This is what will be discussed.

    To use your smartphone comfortably, the home button on the iPhone 7 must be properly configured. This procedure allows you to select the optimal intensity of the touch response.

    New features of the Home touch button

    Apple phone models, starting from version 7, have been significantly improved. They have a special design, where the home button on the iPhone, unlike previous models, is tactile. It is complemented by a Taptic Engine that generates sensory feedback rather than mechanical feedback. Now, when touched, the vibration of the iPhone 7 home button is triggered. Depending on the strength of the impact on the key, the user can unlock the screen, open the list of “Quick Actions”, “Reminders”, “Messages”, etc.

    How to customize the response of the Home button on iPhone 7 and 7 Plus

    The tactile response can vary significantly. In order for the smartphone to correctly notify the user, it is necessary to set up the home button on the iPhone 7. The “Home” sensor detects the force of pressing and reacts to this by calling the voice assistant Siri, unlocking the screen or other option.

    If the smartphone is supposed to be used in conjunction with a case, then before setting up the home button on the iPhone 7, you should put on a plastic or other decorative element. This, as well as the type of surface where the phone is located, affects the recognition quality.

    To change the response mode you need to:

    • open “Settings”;
    • subsection “Basic”;
    • select the item “Home button” from the list;
    • iOS will offer 3 different options as numbers. Choosing, for example, 1, you need to check if it fits. To do this, touch the Home key and the sensor responds with an entry-level vibration. Decide on a convenient response type based on preference.

    Keep in mind that setting up the home key on iPhone 8 affects screen unlocking, taking screenshots, multitasking, etc. Next, in the upper right corner of the display, select the “Finish” button to save the settings.

    Double-tapping the home button on iPhone 7 moves the home screen down for a couple of seconds and lets you easily open even the most distant icon.

    How to unlock iPhone without pressing a button?

    How to unlock iPhone or iPad with one tap without pressing the Home button (for iOS 13 and newer)

    • Open the “Settings” application;
    • Go to the section “Accessibility” → “Home button”;
    • Activate the “Swipe to open” option.

    How to set up a double click on the Home button?

    First select the home key to view the setup options menu. Select Double Tap. Then choose whether you want to assign an action, app, or shortcut to double-tap.

    How to customize the home button on iPad?

    • To customize accessibility shortcuts, go to Settings Accessibility Shortcuts and choose the features you use most.
    • To use the quick command for accessibility, press the Home button three times.

    How to customize the home button?

    How to adjust the sensitivity of the Home button?

    Go to Settings and click Accessibility. Click Tap and choose 3D Touch and Tactile Touch. Depending on the device, only 3D Touch or Tactile Touch may be displayed. Turn on the function and select the sensitivity level using the slider.

    How to customize the home button on iPhone 7?

    To do this, open Settings → General → Accessibility → Home. Here you can select such double or triple tap options as “Slow” or “Very slow.” May 15, 2016.

    How to change button press on iPhone 7?

    To change the tactility of the Home button in the iPhone 7 smartphone, go to “Settings”, tap “General”, then. “Home button” and select one of the three proposed options (buttons “1”, “2” and “3”).

    How to customize the home button on the screen?

    The “Home” button can be deactivated from the quick settings panel, for which we open the curtain with a swipe from above, find the “Navigation button” icon here and press, after which the icon will change color.

    5KPlayer

    The utility is more difficult to install, however, it has an important plus: there is no paid version and all functions can be used immediately after downloading. Even the item about registration, which the program will ask for during installation, can be skipped.

    When launched, it will require permission to access the network. You have to agree. And then everything is standard: screen replay starts on the phone, and 5KPlayer is selected in the list.

    Reflector

    Let’s move on to paid programs. The first one. Reflector, costs 13 dollars, but there is an opportunity to try it for free for 7 days. The main advantages are ease of installation and configuration, as well as the ability to password-protect the connection.

    What is needed to display the image?

    If the picture from the smartphone screen needs to be displayed on a computer running Mac OS, then it is enough to have a standard charging cable for the iPhone. In other cases, you need the appropriate software, and you also need the phone and the computer to be in the same Wi-Fi network. The main plus is that you don’t have to keep your smartphone next to your PC.

    In any case, the computer will not be able to interact with objects on the phone screen: this restriction was introduced by Apple to prevent unauthorized access to the device.

    How to Cast iPhone Screen to Windows and Mac OS Computer?

    For the convenience of recording video from the screen of a smartphone running iOS, or for viewing content, it is better to display the image from a mobile device on the computer display. Since Apple’s operating system is proprietary, not every program is suitable for this. However, there is a whole list of applications for both Windows and Mac OS, among which everyone can choose the most suitable one. Let’s take a closer look at how to broadcast video from the iPhone screen to a computer, and what you need to do.

    LonelyScreen

    Instructions for using the program are described in the following

    The latest free solution that doesn’t have many features. In fact, there are only two of them: displaying an image and recording it. The installation also needs permission to access the firewall. Also, some antiviruses may react negatively to the application, so it is recommended to add it to the list of exclusions.

    Displaying an image from the screen on Windows

    There are several programs that allow you to perform this operation. Let’s consider each separately.

    Mirroring360

    Another paid program with a one-week trial period. Unlike competitors, it is possible to broadcast directly to the Internet. For safety, access to this online broadcast is carried out via a special link.

    ApowerMirror

    This program has two versions. The free has a slightly curtailed functionality, but for an ordinary user it is more than enough. The program is simply installed on your computer, then you need to register and select the “iOS” tab. Further, on the mobile device in the control point, the screen repeat is selected, and in the list you need to find the computer.

    Home button on iPhone: where it is, how to display it, what to do if it doesn’t work

    Modern smartphones are made with a minimum of buttons. and more preference is given to touch control. Today you will be presented with the Home button on the iPhone. What is this control? What functions is he responsible for? Where is the button located? What if it stopped working? The answer to all these questions is much easier than it might seem at first glance. Even an inexperienced iPhone owner can figure them out.

    Functional

    What can the Home button on iPhone be used for? It has a wide range of uses. There are several options for pressing the button. one, two and three. Depending on this, the command executed on the smartphone will change.

    For example, on iPhone, using this button you can:

    • unlock the device;
    • close the program, application or game;
    • go to Recovery Mode;
    • launch widgets of a smartphone or tablet;
    • activate one of the standard programs;
    • open a menu showing multitasking applications (in the latest iOS versions);
    • enable and use voice control (triple tap).

    The first 4 points are the same for all iPhone models. The rest of the functionality depends on the installed operating system. Often, users themselves can set in the gadget settings, for which the “Home” button on the iPhone will be responsible. Therefore, it is difficult to say exactly why it is used. It is enough to remember that with its help you exit the programs, unlock the device and switch to Recovery Mode.

    What is the button

    It is important to be aware of which mobile device control you are talking about. Home button on iPhone. this is one of the few keys that can interest the user. It is the most functional device control element.

    It is noted that the Home button is used on a smartphone more often than others. It supports a variety of options. They will be discussed further. This control is mainly used to unlock the iPhone or to exit the game / program.

    Location and Description

    Where is the Home button on the iPhone? Every owner of the device should know about this. It’s not hard to guess what kind of smartphone control we are talking about. The studied button is located at the bottom of the gadget, on the front panel, under the screen. It is made of glass and has a round shape. The button itself usually has a small square, but it may not be. It all depends on the iPhone model. The control is present in any “Apple” product.

    If it doesn’t work

    As already mentioned, the mentioned control is used constantly in practice. Therefore, sometimes the owners of “Apple” products complain that the Home button refuses to perform its functions. Fortunately, Apple has made sure that all the controls on smartphones and tablets are robust enough. In most cases, breakdowns are repaired quickly and easily.

    So, if you want to make the Home button on the iPhone working after some kind of failure, you must:

    • Clean the control and lubricate it. It is best to use special lubricants and alcohol for this purpose.
    • Calibrate the button. To do this, any system application (say, a calendar) opens, after which you need to hold down the button to turn off the smartphone until the functional menu appears. Next, the Home button is clamped. Keep it until the menu disappears.
    • Correct the position of the connector. The gadget is connected to a 30-pin cord, after which you need to lightly press the place where the wire is connected to the iPhone.

    All of these tips will help bring the Home button back to life if a system crash has occurred. In case of hardware damage, the control element will have to be replaced. It is advisable to seek the help of specialists. They will replace the button without any problems and return it to work.

    Output on display

    But there is one more trick. It will help you use the control you are learning without its physical form. The Home button on the iPhone screen is not uncommon. Every modern owner of “Apple” products can display it and use it if necessary. Usually this function is applied on new iOS. There is a special function for displaying a button on the screen. It’s called AssistiveTouch. It is suggested to enable it in a few clicks.

    precisely, to display the Home button on the device display, you will have to:

    • Open “Settings”. “Basic”. “Universal access”.
    • Find AssistiveTouch. Click on this line.
    • Move the function pointer to the “On” position.

    This is the simplest and fastest solution for bringing your idea to life. A graphic image of the Home button will appear on the screen, which can be used along with the physical interpretation of the element. Nothing difficult, incomprehensible, or unusual. If the Home key is displayed, it can be dragged to any place convenient for the owner.