iPhone 7 burns apple and won’t turn on

iPhone 6/7/8 / X / 12 won’t turn on lit apple on and off, how to solve?

Sometimes a glowing apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few probable reasons for the appearance of this trouble. Today we’ll look at the most common iPhone won’t turn on problems and try to find a solution.

The reasons why the apple burns but the iPhone does not turn on

Before referring to the instructions, you need to understand what caused the iPhone to not turn on and the apple on the black screen burns. The following reasons are listed:

Sometimes the battery is discharged, the phone is completely discharged, so an apple appears. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on.

The phone freezes when you turn it on, probably because the Power button is broken. Occurs when disassembling an iPhone.

The device does not boot further than an apple. a problem with the power supply of the device. This often happens with phones during network jumps when charging.

Charging controller is broken, there was a power outage.

Problems with the power supply circuit of the device. The device lay on the charge during a strong power surge.

Problems with the motherboard, while the phone itself may even boot sometimes and even work for a while. True, the glowing apple on the iPhone screen will appear more and more often until it stops starting normally at all.

What to do if the iPhone does not turn on and the apple hangs

An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be pressed and held for 10 seconds. If the reboot does not help, then an update or flashing of the device will be required. To do this, run iTunes on your PC.

Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you must hold HOME and. Volume)

Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.

A notification will appear on the computer screen that the device is in recovery mode

Step 4. Now just click on the Restore button Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

DFU mode

If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.

There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you decide “the apple is on but the iPhone won’t start”.

Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.

We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.

Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Ready!

Useful software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when standard system methods do not work.

If the iPhone does not turn on, but the apple is constantly on

Another unpleasant situation that often occurs among users of the iPhone 4S, iPhone 5S. an apple flashes on and off on the screen. In this case, do not test your nervous system for strength. Most likely, there was a failure restoring iPhone from a backup. What should be done in this situation? The recovery mode and the computer on which you first need to run iTunes will help you. Then connect the USB cable, but for now only to the computer. Your next action is to turn off the iPhone completely, getting rid of the apple, which is still burning and extinguishing. To do this, you need to hold down the “HOME” and “POVER” buttons. Next, hold down “HOME” and connect the USB. This should be done until the iTunes logo appears on the screen and next to it. the image of the plug. You will see an inscription on the screen that the recovery mode is working. All that will need to be done in the future is to click the “Restore” button.

Read more:  What color to take the iPhone 11

What to do if iPhone is stuck on Apple logo

The ReiBoot program from Tenorshare is a special application designed to eliminate all errors and operating system failures on iOS devices. The unique advantage of the program is the minimum effort from the user: you just need to make a couple of clicks of the computer and the seemingly insoluble problem will be eliminated from your iPhone.

So, let’s look at the same few clicks that you need to make in this program. First, download the software from the Tenorshare website and install it on your computer. Next take the following steps.

Step 1 Run the utility on your PC. Connect iPhone to computer with USB cable and unlock it.

Step 2 In the program window, select the “Enter recovery mode” option. Wait until the iTunes icon appears on the screen of your iPhone.

Step 3 After that, in the program window, click on the “Exit recovery mode” option that has become available. After that, your iPhone will be restarted normally and available for use.

As you can see, the instruction is very simple and does not require any special knowledge or special effort. With all this, the result cannot but amuse. 100% return of iPhone functionality in a matter of minutes. But apart from this function, the program has a number of other features that may interest you and encourage you to have this utility in your own “desktop” programs.

  • The program supports all iOS devices: iPhone, iPad, iPod, including not so long-released models, such as iPhone 11.
  • The utility is compatible with all versions of iOS, on a computer it works with both Windows and Mac.
  • Can be used to fix many different iOS system crashes and errors: over 50 different system bugs in total.
  • A unique feature of the utility is the ability to fix the device system without losing the data stored on it. an indispensable feature in a situation when it is unrealistic to make a backup copy.
  • In addition to updating the system, the program allows you to perform the reverse operation. Downgrade system, just as quickly and efficiently.
  • The program can also help in case of problems with tvOS.
  • User-friendly interface, ease of use, tips accompanying the user in the process, make the implementation of the utility pleasant and comfortable.
  • The availability of the program installation expands the circle of potential users.

Update 2020-05-21 / Update for iPhone 11

Hard restart when iPhone won’t turn on and apple is on

Turn it off and on again. this method almost always helps not only when the iPhone breaks down, but also with PCs, routers and mobile accessories. The process for starting Hard Reset depends on your iPhone model.

Did it help? Recommend it to your friends! 3. Hardware problems

Unfortunately, the reasons that the iPhone does not cut in and the apple on the screen is glowing are very often obstacles with the hardware internals of the phone. And then flash it. don’t flash it, but it won’t work anyway. What can serve as a prerequisite?

Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.

The iPhone does not turn on but the apple on the screen is on. What to do?!

Popular phones from Apple, whatever one may say, this is the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, difficulties may happen. both hardware and software. One of the frequent events that can happen to them is when the iPhone does not turn on, but the apple burns after pressing the Power button.

People call this unpleasant problem a “white apple”. In fact, this is a certain state of the iPhone, which is characterized by the display of the company logo (a bitten glowing apple) on the screen when you try to turn on the phone. With all this, the upcoming download of the device does not continue. With all this, he does not react to anything and, as usual, does not turn off. How to be? The most common thing you can experience doing is a Hard Reset. But, let’s take our time and consider all the options in order.

So, what can be done to restore the phone’s working capacity if the iPhone is not cut in, the apple is on fire ?! There are such methods:

Blog about modems, routers and gpon ont terminals.

DFU mode

If your iPhone does not work, even after the one tested above, there remains another way. to return the iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.

There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you solve “the apple is on fire but the iPhone won’t start”.

Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to a computer (or Mac) using a USB cable.

We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.

Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Ready!

Suitable software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the most common and fastest way. And it will help when standard system methods do not work.

What to do if the iPhone does not turn on and the apple hangs

The usual way to solve the problem is to reboot the device using the Home and Power buttons, which must be pressed and held for 10 seconds. If rebooting does not help, then an update or flashing of the device will be necessary. To do this, run iTunes on your PC.

Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you need to hold HOME and. Volume)

Read more:  Iphone Does Not Find Bluetooth

Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.

A notification will appear on the computer screen that the device is in recovery mode

Step 4. For now, just click the Restore button Before returning the iPhone to industrial options, the computer will need to download the latest version of iOS from Apple’s servers. With all this, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is not stable or slow, the process may never end. Connect to a faster Wi-Fi connection.

What to do if iPhone won’t turn on after jailbreak?

Turn off your smartphone.

Hold the volume up button on the side of your iPhone.

With the key pressed, try to start the mobile device.

iPhone 7 / 7 Plus: How to Fix Black Screen/ Wont Turn On/ Blank Display

iphone, burns, apple, turn

An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.

It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.

If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways how to remove jailbreak from iPhone. in case of the “white apple” problem, it is recommended to flash the device.

Re-flashing. it just sounds scary, in fact, the procedure is quite simple:

Launch iTunes and connect the iPhone to PC with a cable.

Fix iPhone 7 or 7 Plus Stuck on Apple Logo or Boot Loop Issue Quickly

Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on an iPhone in our article on DFU-Mode.

ITunes will notify you that iPhone has been detected in recovery mode.

Click on the “Restore iPhone” button.

iTunes will download and install the new firmware on the gadget itself. You just have to wait for the completion of the procedure.

Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.

IPhone Freezes When Turning On: Possible Causes

Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.

Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!

However, if the iPhone turns on before the “apple” and turns off, this may be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple“:

    Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, you should not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.

The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:

From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.

The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.

How to get rid of the “white apple” if the iPhone is not jailbreakable?

If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It’s very simple: if the call is in progress, then the gadget loading is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white apple”.

You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.

Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.

Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result speaks of a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.

iPhone won’t turn on: apple is on and off

Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.

Read more:  How to Create Id On Iphone 5s

The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “appleburns on the screen for a long time, then the screen just goes out.

Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also eliminate the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?

If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.

But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware breakdown, which will require you to contact the service to fix it.

Hardware problems

Unfortunately, the reasons that the iPhone does not turn on and the apple on the screen is lit are very often problems with the hardware stuffing of the phone. And then flash it. don’t flash it, but it won’t work anyway. What could be the reason?

Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.

Discharged battery

Banal utterly, but one of the most common reasons. The user is sure that the phone’s battery is charged, but it is almost completely discharged. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on. By the way, this is also possible in the event of a charger malfunction. The user thinks that the device is charged, but he just finally sat down. Try charging from a computer via a USB cable.

Equipment setup

Software crash

If you have recently installed any application before, digging through the settings or tried to jailbreak, then with a high degree of probability we can say that this is exactly what will cause a failure and the appearance of a glowing apple. Very often the so-called “Hard Reset” helps. reboot the phone using the Home and Power buttons, which must be pressed and held for 8. 10 seconds. In more than half of such cases, the iPhone then boots up and works successfully. The main thing. do not forget to disconnect it from the computer or charger before that. Did not help? Then you should try to reflash the device. To do this, you need to launch iTunes on your computer, and then connect your iPhone to your computer with a USB cable. then turn it off by holding the Home and Power buttons. You need to hold it until the screen turns off, after which you need to release the Power button, but do not release Home. This will put the iPhone in DFU mode. The screen will be black, but a message should appear on the computer that the device is in recovery mode. Let go of the “Home” button. In the iTunes application, click the “Restore” button, after which the process of downloading and installing the new firmware on the phone will begin.

After this procedure, you will receive a “clean” device, without settings and additional programs, and the burning apple on the iPhone should disappear.

iPhone won’t turn on and apple is on. what to do?!

Tablets and smartphones from Apple have long won the reputation of being fairly reliable devices. And the iOS operating system did not give any particular reason for criticism. Nevertheless, sometimes problems do happen. electronics, whatever one may say, are capricious thing. One of the frequent occurrences is that the iPhone does not turn on and the apple on the screen burns. On this, the phone freezes and you will not be able to turn it off in the usual way. There are quite a few probable reasons for the appearance of this trouble. Let’s try to figure them out and, if possible, try to fix it ourselves.

iPhone won’t turn on and apple is on. what to do ?! : 79 Комментарии и мнения владельцев

Hello! Updated to iOS 11, iPhone 7. The phone sat down, after which it does not turn on, only the apple is on iTunes does not see it, it does not enter dfu mode. What could be??

Alena. That is why it is not worth diving into the 11th version yet. Try to unplug, charge to the end, and re-enable.

Marina. how did you take him from a non-working service??

The phone just burns apples and everything Reboot goes badly, this phone is needed

Hello iPhone 5 s, the phone turns on, the apple appears and then disappears and everything is just a black screen, but the screen is highlighted, which may be Hard Reset did not help in DFU mode does not enter help. Thanks in advance

Good evening! Such a problem, I have an iPhone 6, sat down the phone, put it on charge, the icon pops up and goes out, I can’t restart.?

So it does not show what is charging, although when you connect it to a PC, it sees iTunes.

For good reason, you need to charge it, and then try to restore it through iTunes from a backup (if you did it, of course)

Natalia. if nothing was done to you at the service center. how can I do something to you without seeing the device at all? Try to refer to an authorized service.

hello iPhone 6 an apple appears and the screen is backlit, nothing else to do?

If the advice from the article did not help, bring it to the service. Nothing else to do.

is it possible to restore iPhone in 2 way without backup?