iPhone 6s hangs on an apple

Power button does not work

The power button consists of two elements: a film switch and a plastic pusher, it is he who sticks out of the case and you press it with your finger. When enough dirt accumulates between the pusher and the button, the pusher cannot reach the button and the iPhone will not turn on. First, let’s try to wash away the accumulation of dirt with rubbing alcohol, medical grade or isopropyl alcohol. In no case do not take vodka, eau de toilette, glass cleaner for this operation. In addition to alcohol, these liquids contain a fair share of water, it will remain inside the device and cause corrosion.

  • Pour alcohol into a syringe (5 ml is enough) and putting a needle on it, drip onto the power button. After 8-10 drops have seeped under the button, press it several times, vigorously but not roughly. Dripping alcohol again. Repeat the procedure three to four times. If the reason for the inoperability of the button was contamination, it will begin to respond to pressing after the first call.
  • If manipulations with alcohol did not help, the membrane switch itself is faulty and it must be changed.
  • Disassemble the iPhone as in the instructions above. In the upper part of the case, unscrew the screws that secure the headphone jack, power button, volume rocker and mute switch.

How to fix problems

All faults are traditionally divided into hardware and software problems. To fix software errors, we need a USB cable and a computer.

For the treatment of iron, the list will be much wider:

The battery is out of order and needs to be replaced

If you do not contact the service center, the chances of purchasing an original battery for replacement are zero. When buying a battery, be sure to check it for leaks, swelling and corrosion. If possible, check the voltage with a tester.

Why iPhone won’t turn on: make a diagnosis

Outwardly similar symptoms can be the result of completely different malfunctions. The correct diagnosis is 90% success, so below we will analyze in detail the possible options for breakdowns.

The device hangs on the “apple” after a factory reset

To get your iPhone back to normal, you need to do the following:

  • Turn off the device by long simultaneous pressing of the “Power” and “Home” buttons
  • Put iPhone into DFU mode: Press and hold the Home and Power buttons; keep the buttons pressed for 10 seconds; release the Power button while continuing to hold the Home button; hold the Home key until iTunes detects the new device in recovery mode (approximately 10-15 seconds).

iPhone does not turn on, lights up “apple” and goes out

A white “apple” glows on the screen either continuously until the battery is discharged, or the device is cyclically rebooted every few minutes. This can happen for the following reasons:

    A swollen battery will deform the device board. This malfunction is more typical for the third generation iPhone, where the battery is installed between the “trough”. the bottom of the case and the motherboard. Deformation of the board leads to breakdown of contacts and, as a result, the device “hangs” on the splash screen. After replacing the battery with a new one, normal operation of the device may or may not be restored. If we get lucky.

The device does not respond at all

iphone, hangs, apple

If your iPhone 8, iPhone 8 Plus or iPhone X does not respond at all to your actions, it just freezes and shows a static picture or just a dark screen, you need to restart.

In this case, you should not lose any data that you worked on if the corresponding software has an autosave function. And there will definitely not be an iPhone reset.

On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.

If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.

If you are using an iPhone 6s, 6s Plus, or older models, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.

Smartphone freezes on apple while loading

It happens that the iPhone seems to start, but its loading stops at the Apple logo. an apple. But this mainly happens on test firmware and with other risky manipulations.

First. Connect your device to your computer and open iTunes.

Second. When the device is connected, perform a forced reboot.

  • On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.
  • If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.
  • If you are using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.

Never release the buttons described above when the apple appears. the Apple logo. Keep holding them until the recovery screen starts. Let go and exhale.

Third. Select “Update” when prompted to perform a repair or update. iTunes will try to reinstall iOS without erasing your personal data.

ITunes will first download a fresh copy of iOS for the device. You just have to wait for the completion of the procedure or try to perform it again if something goes wrong.

iPhone 8 or X won’t turn on or freezes on apple. What to do?

Many of us are well aware of how to deal with the problems that can arise with the long-familiar iPhone. However, Apple has changed a lot in the iPhone 8, iPhone 8 Plus and iPhone X.

In this article, we will try to figure out what to do if your iPhone 8, iPhone 8 Plus or iPhone X do not respond to actions, do not turn on at all, freeze on an apple.

Device does not start after restart

If your iPhone 8, iPhone 8 Plus, or iPhone X still won’t turn on after the forced restart procedure, it might be discharged. Yes, you didn’t even notice it.

In this case, connect the device to a wired charger (this is preferable) or put it on a wireless station and leave it for an hour. In a couple of minutes this will appear:

If the charging screen does not appear for an hour, or if a screen for connecting to a power source is displayed, do not despair. Just check the connector, USB cable and power adapter.

First, make sure 100% that all connectors are securely connected and not damaged or clogged with dirt. Try a different cable or power adapter. If it is dull. to the service.

Please note that in winter the battery can run out very quickly due to low temperatures. over, it may not provide the required power, and the device will simply turn off.

Of course, everything written above is also true for the iPhone 7 and below. There are simply no nuances other than the lack of support for wireless charging in this case.

What to do if all else fails

As a result, after all the procedures described above, you should see the familiar lock screen of your iPhone 8, iPhone 8 Plus, iPhone X or older iPhone that you are so used to:

However, on rare occasions, you may not succeed. Yes, this happens sometimes with the iPhone. And there are plenty of reasons for this outcome:

  • There is something wrong with the display if it stays dark but you hear alert tones and feel vibration.
  • There is something wrong with the display if it stays black, but you hear a beep when you plug your iPhone into a charger.
  • There is something wrong with the touch, if the display works, but does not respond to your gentle and not strong pressing.
  • What’s wrong with the buttons if you can’t force restart the device or even just press them to do so.
  • Something is just wrong if the device stuck on the screen with an apple and is not recognized by iTunes.

As a result, you need to go to the service. But his choice is a topic for a separate material. Better, of course, in the official one, but it is long and expensive. Unofficial, but dangerous for iPhone.

Common way to solve reboot problem on apple is DFU Mode

We can restore the gadget when iTunes does not recognize your device. But with these methods, all data will be erased.

For iPhone 6S, SE and below, please do this:

First we connect the device to the computer, turn on iTunes.

Press the Home and Power buttons at the same time, hold for 12 seconds, then release the Power button, but continue to hold the Home button until the iPhone is detected in iTunes.

Next, press the “Recovery” button in the program and wait patiently while the iPhone reboots. If the above methods cannot solve the problem, try using Tenorshare ReiBoot.

For iPhone 7 and iPhone 7 Plus, please do this:

Press and hold the side button and volume down at the same time.

After 8 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.

In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.

For iPhone 8, iPhone 8 Plus, and iPhone X, please do this:

Press and quickly release the volume up button.

Press and quickly release the volume down button.

Press and hold the side button until the screen turns black, then press and hold the side button and volume down.

After 5 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.

In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.

If this method fails to fix the problem, try using Tenorshare ReiBoot.

Why iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 hangs on the apple and turns off?

Everyone knows iPhone X / 8/7 / SE / 6s / 6/5 / 5s often have problems. Especially, when updating the firmware, it may not start, but show an apple, then either with one strip. What is causing this? Maybe the firmware is not compatible with your device. Or the problem is that the malfunction is caused by system crashes.

What to do if apple is on on iPhone but won’t turn on

Do not worry, now we offer 2 ways to get out of the restart on an apple: enter the iPhone into DFU mode, or to the service center, the most effective method is Tenorshare ReiBoot.

iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 keeps restarting on apple

For iPhone and iPad, after updating to iOS 11 and iOS 12, a problem arose, it often appears. it constantly reboots on an apple. Several situations can be distinguished: iPhone hangs on an apple and a blue screen; iPhone restarts on apple and red screen; iPhone hangs on an apple and restarts; iPhone does not turn on, lights up apple and turns off; iPhone does not turn on; Apple burns and restarts; iPhone does not turn on Apple flashes, etc.

Read more:  How to Make an American Apple Id Account

If you come across one of the above, you can fix them in the following ways.

An effective and fast way to solve the reboot problem on apple. Tenorshare ReiBoot

Click the button and download the Tenorshare ReiBoot software from the official website for free. Install the utility on your computer (there is support for Mac and Windows).

Before restoring, you need to put your phone into recovery mode to see the device. Press and hold the Home and Power buttons at the same time, and then release the buttons until the connection to iTunes appears on the screen. Connect your iPhone to your computer using a USB cable. Then run Tenorshare ReiBoot software on PC, it will automatically recognize your device.

Click on the active Fix Now button. And select “Next”, the firmware will load.

Note: Users should make a backup before getting started. Tenorshare ReiBoot does not theoretically bring any data loss, but Tenorshare recommends backing up beforehand to prevent accidents.

After downloading, click “Start Repair”. A system restore is in progress and your phone will then reboot. The device will be ready for use. And your problem will be solved.

If the solutions did not help, then you should contact the service center. After replacing the screen or battery, the device restarts.

Tenorshare ReiBoot provides all users with five ways to enter and exit “recovery mode” for free. This will definitely fix some of their problems.

With such a review, using the Tenorshare ReiBoot tool, you can solve not only this problem when the iPhone freezes in headphone mode, but also others that may arise after updating iOS 11. For example, if your iPhone turned into a brick after installing the new iOS 11, or freezes on a call (during an incoming call). There may also be a situation when the phone is frozen on the cord and the iTunes icon, a black or blue screen, the display does not respond to touch. You can download the Tenorshare ReiBoot program for free on the official website of the developers.

iPhone hangs on the “apple

IPhone freezes during boot are usually software related. This can be either a one-time failure that can be eliminated by a repeated reboot, or serious damage to the operating system by viruses or user actions that cannot be easily dealt with. Often this phenomenon occurs after updating the operating system, if during the installation process any file was incorrectly copied or was missing. Sometimes the reason is the device freezing in the installation of programs from an unknown source. Poor-quality software can not only ruin the mood of the user, but also damage the files of the operating system of the smartphone.

If your iPhone hangs on the “apple” and refuses to continue further loading, it is better to entrust the repair to a specialist. The fact is that trying to fix the problem, it is very easy to irretrievably lose all the data that is in the phone’s memory. In addition, without having special knowledge and a set of tools for diagnostics and repair, there are more chances to harm the device even more than to repair it.

Name of workPricesPerformance time
Phone repair when hanging on an apple or loading from 1000 rubles. 1 day

Yesterday I tried to turn on the phone all day, but the matter did not progress beyond the Apple logo. What to do, carry to the workshop or are there other options? The phone did not fall, did not break. IPhone 5s Model.

The specialist’s answer: Julia, you shouldn’t torture yourself and your phone. If one or two reboots did not help, then most likely further manipulations will be completely useless. Most likely the problem lies in the software. Contact the service center and you will surely be helped.

My iPhone 4c has stopped at an apple and is not responding to any of my actions. Doesn’t even turn off. How to be?

The specialist’s answer: Press and hold the “Home” and “Power” buttons simultaneously for 10 seconds. After that, the device should restart. If this does not happen, additionally press the power button (briefly). If after a forced reboot the situation repeats. contact the service center.

DFU mode on iPhone and iPad

If the computer does not see the connected iPhone, you need to put it into a special Device Firmware Update mode or DFU mode. This is a special mode for updating and restoring firmware on Apple devices when standard methods do not help. It’s easy enough to enable Forced Recovery, but the process is slightly different on different iPhone models. How to enable DFU-mode on your device can be found on the official Apple technical support website.

If you did everything correctly, iTunes will automatically recognize the iPhone in recovery mode and a special notification will appear on the screen.

iTunes detects iPhone in DFU mode

Then follow the instructions on your computer screen. The process is very similar to the regular firmware described above.

iPhone hangs on the logo: causes and solutions

And so, if you are faced with a problem when your iPhone does not boot, hangs on an apple or asks to connect it to iTunes. firstly, do not panic. The problem is solvable in 90% of cases and is quite simple. You may even be able to restore the phone to work on your own.

First of all, pay attention to what preceded the iPhone freezing on the apple and no longer turning on. Perhaps the phone was being updated, perhaps it was dropped on the floor or liquid got on it. All of these can affect the performance of your iPhone and lead to the problems described above.

The main reasons for iPhone freezing on an apple:

  • “Crooked” installed firmware;
  • Installed custom firmware. jailbreak;
  • Defective iPhone battery;
  • Failure of some of the elements of the motherboard: flash memory, processor, modem.

Almost all of these problems are solvable and repairable, except for the processor blade. It cannot be replaced with a new one and is very difficult to reball. In this case, it will be quite problematic to repair a smartphone. In other cases, when the problem concerns the software, restarting the device or flashing the iPhone almost always helps. If the problem concerns hardware, then you will probably have to seek help from a service center, for example, fixlab.com.ua, which specializes in complex repairs of motherboards for smartphones, tablets and laptops.

IMPORTANT.

If you choose “Update iPhone”, then all personal information will be SAVED on it. But updating the iPhone that hangs on the apple is not always possible. Sometimes you have to perform “Restore iPhone” which leads to the complete destruction of all information on the iPhone. You can only recover deleted information if you have backed up iPhone before.

  • If everything went right and without interruptions, then your iPhone will turn on with the updated firmware and you can continue to use your favorite gadget.
  • If an error appears during the recovery or update process, we recommend contacting one of our service centers. Where comprehensive and always free diagnostics of your iPhone will be carried out. As soon as possible, we will establish the true problem and determine the best ways to solve it by agreeing on the timing and cost of repairs with you.

    Self-service iPhone recovery via iTunes

    “Hard” rebooting different iPhone models

    First, try to force restart your smartphone. As a result, all non-critical errors will be fixed, the cache memory of the device will be cleared and your smartphone should boot normally. You can see how this is done on different iPhone models in the picture above or you can read in our article on this topic.

    If the reboot does not help and the smartphone still hangs on the apple, you need to go to more radical methods. flashing the iPhone. Follow the instructions below exactly and you will probably be able to independently get the iPhone out of the state when it hangs on an apple or constantly reboots.

    • To get started, download and install the latest version of iTunes on your computer.
    • After that, use the cable to connect the iPhone that “hangs” on the apple. It should be automatically detected by the system and iTunes.
    • Then follow the instructions and prompts of the iTunes program to “Update” or “Restore” iPhone. iTunes will independently select and download the latest firmware version for your iPhone model and install it.

    How to Get iPhone / iPad Out of Recovery Mode

    Force restart device

    IPhone won’t boot. hanging on an apple. Easiest way to develop iOS 14 stuck on Apple logo. this will reboot the device, although a little trick will not significantly fix this problem most of the time. Anyway, there is no harm in force restarting your iPhone.

    Press and quickly release the volume up button.

    Press and quickly release the volume down button.

    Press and hold the side button until the Apple logo appears.

    On iPhone 7/7 Plus: You need to hold down the Power and Volume Down buttons for about 10 seconds. You can release the buttons when the Apple logo appears on the smartphone screen.

    IPhone 6 and earlier, iPad, or iPod touch: Press two buttons at the same time. Home (round under the screen) Power (on and off).

    Without releasing them, wait until the iPhone or iPad turns off.

    What to do, iPhone or iPad stuck on apple after iOS 14 update. 3 ways

    Not everyone can successfully download and install iOS 14 on their iPhone and iPad. Some users have encountered issues during the update process. The most common problem is iPhone is frozen on apple and won’t recover normally after iOS 14 update. Don’t worry about it, still not so bad. Here are 3 ways you can fix to fix the problem. iPhone stuck on Apple logo without data loss when upgrading to new system.

    Restore iPhone via iTunes

    If you have created a backup previously or just don’t mind losing iPhone files, you can restore your iPhone via iTunes. How to put iPhone into recovery mode.

    Connect your device with a USB cable to your computer and open iTunes (in case it doesn’t open automatically when connected). Click Restore iPhone. “,” Restore iPad. ”Or“ Restore iPod touch. “

    Note. If iTunes doesn’t recognize the iDevice, you first need to manually put it into recovery mode:

    Force restart the connected device by following the instructions, but do not release the buttons, when the Apple logo appears, wait for the “Connect to iTunes” screen.

    IPhone X, iPhone 8, or iPhone 8 Plus: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the side button until the Connect to iTunes screen appears.

    On iPhone 7 or iPhone 7 Plus: Press and hold the Side and Volume Down buttons at the same time. Keep holding them until the Connect to iTunes screen appears. On iPhone 6s and earlier, iPad, or iPod touch: Press the Home and Top (or Side) buttons at the same time. Keep holding them until the Connect to iTunes screen appears.

    In recovery mode, click “Recover” on the pop-up window to restore from the backup.

    Fix iOS 14 No Data Loss Issue with Tenorshare ReiBoot

    If the two options above don’t work for whatever reason, as the buttons don’t work, the iPhone cannot enter recovery or DFU mode manually, you don’t have a previously saved backup, etc. There is a completely good tool. Developed by the Tenorshare team, Tenorshare ReiBoot allows you to restore an iPhone that is hanging in an apple with a few simple clicks, without having to restore your iOS device, without using the Home or Power buttons, and without losing any files. It is fully compatible with all Apple device models: iPhone XS / XR / X / 8/8 Plus / 7/7 Plus, iPhone SE, iPhone 6s / 6s Plus / 6/6 Plus, iPhone 5s iPad Pro (9.7 inches). iPad Pro (12.9-inch), iPad Air 2 / Air, iPad mini 4/3/2 / mini, iPad 4/3/2, and iPod touch. It is very easy to use for beginners.

    Read more:  How To Open Rar On Iphone

    Download the program and connect the device to the computer using a USB cable.

    The program will gain access to the device, then the “Enter recovery mode” button is displayed. Press this button and start to enter recovery mode.

    After successfully entering Recovery Mode, you can click Exit Recovery Mode to save your iPhone from the need for recovery and successfully restart it.

    If the above methods did not help solve the problem, click the “Resolve All Freezes” button, and then you will get to the recovery page, click “Fix it now”.

    IPHONE 6S STUCK AT APPLE LOGO FIXED BY U2 IC

    Now you will be “Download Firmware Package” interface, click “Download” button to download the firmware package online.

    After the firmware package has been successfully downloaded, click the “Start Repair” button to start the system restore.

    Besides. it can help you completely solve various freezes (stuck on a black screen / during power on / on a blue screen of death), with an iOS system (stuck in DFU mode / in recovery mode / in the HOME button) and with an error (iTunes crashed when syncing / device update / restore) on iPhone / iPad / iPod touch without data loss or damage.

    If rebooting your device, updating the firmware, and even performing a factory reset didn’t work, the issue might be hardware related. In this case, it is best to contact a service that specializes in repairing Apple products.

    Fix iPhone Stuck on Loading Screen without Data Loss

    If you are looking for the best solution to fix this problem without losing your phone data, we recommend Tenorshare ReiBoot. This utility will help you fix any iOS crashes on your device, including freezing during iPhone startup, freezing at the Apple logo, recovery mode, black screen. endless download mode and other iOS problems. To correct your device using Tenorshare ReiBoot, download and install it on your PC, then follow the instructions.

    Open the ReiBoot software and then connect your iPhone to your computer using a USB cable. The program will immediately detect your device. Select the “Fix operating system” option in the Main Menu.

    Click on “Start” and download the required firmware package to your device. Click on “Download” to start the process.

    Why is my iPhone stuck during the boot process ?

    Understanding the cause of the problem means that it can be avoided in the future. Here are the most common causes of iPhone freezing on the loading indicator:

    Your device may malfunction as a result of the unstable version of iOS you are using. If the iPhone freezes when booting immediately after updating the iOS system, then the reason most likely lies in it.
    Hardware problems

    There might be a technical problem. If your device has been exposed to water or any component of the equipment has been damaged, its performance can be seriously impaired, which leads to various problems, for example, the device freezes during the boot process.
    Malware attack

    Probably the most common cause is a virus attack. Malware and viruses can affect the settings of your device and provoke this and many other problems.
    Problems in boot settings

    Errors in iPhone boot settings can also prevent iPhone from working properly and cause this problem.

    Using recovery mode

    If rebooting doesn’t help, you can try restoring your iPhone in recovery mode. Attention! All device data and settings will be erased. To put iPhone into recovery mode, follow the instructions below.

    Launch iTunes on your PC, and then connect one end of the USB cable to your computer.

    iphone 6s stuck on apple logo PP_0V9 LDO 3 and PP3V0 TRISTAR problem

    Press and hold the Volume Up / Down button (Home button for iPhone 6 and later) for a few seconds. Without releasing the button, connect the other end of the cable to your device.

    Release the button, then the iTunes icon will appear on the iPhone screen.

    iTunes will automatically detect your device in recovery mode. Click “OK” to start the process. Check if the problem is resolved.

    Restart iPhone

    Rebooting the device is the simplest and, at the same time, quite effective way to fix any error. Therefore, it is better to start with her. Below are the restart methods for different iPhone models.

    For iPhone X / XR / XS / 8/8 Plus: Press and release first the volume up button, then the volume down button, and then press and hold the side button until the Apple logo appears.

    For iPhone 7/7 Plus: Simultaneously press and hold the Volume Down and Power buttons until the device restarts.

    For iPhone 6 / 6s and earlier, iPad: Press and hold the Home and Power buttons until you see the Apple logo.

    What to do if iPhone stuck on black screen while loading

    Whatever provoked this error, the main task is to eliminate it; otherwise, you would not be reading our article now. Well, you’re in luck. One of the ways, or maybe all of the following, will return your device to working condition.

    What to do if iPhone freezes during the boot process

    Have you picked up your iPhone, but all you see is the loading screen? If you see an Apple logo or a spinning boot indicator on a frozen black iPhone screen, it may be nearly impossible to use the device, let alone fix it. No matter how annoying this situation is, it occurs quite often. This news is good news, as it means that there are still ways to fix this error. This article provides some of the most effective solutions for iPhone freezing while loading. But before we start, let’s look at the causes of this problem.

    IPhone repair at a service center

    If none of the above solutions helped you get rid of the stuck iPhone loading indicator, you should contact an Apple service center. If the device is still under warranty, the repair will cost you free of charge. To avoid long queues, make an appointment by phone in advance to hand over the device for repair.

    Restore iPhone in DFU Mode

    If the recovery mode option didn’t work, you may need to put your iPhone into DFU mode. To do this, follow the instructions.

    • Connect your iPhone to PC and launch iTunes.
    • Press and hold the Power button and the Home button (iPhone 6s and earlier) or the Volume Down button (iPhone 7) on iPhone at the same time for about 8 seconds.
    • After 8 seconds, release the power button while continuing to hold the Home button or Volume Down button until the message “iTunes has detected an iPhone in recovery mode” appears.
    • Release the Home button or the volume down button, after which the screen of your iPhone should turn completely black. If this does not happen, repeat the whole process again.
  • Restore iPhone with iTunes.
  • For iPhone 8, 8 Plus and X, press and quickly release the Volume Up button, then press and hold the Side button until the screen goes black.

    Method 3 Enter DFU mode

    Using this method will delete all information from the iPhone. If you’ve already created backups, you can download them later from iCloud.

    DFU or device firmware update allows you to connect to iTunes and bypass automatic updates. This allows you to change the iPhone firmware to any version.

    We wrote about this method for iPhone X / XS / 11 earlier. Using this mode, you can restore the firmware of the device.

    How to enter DFU mode on iPhone with TouchID (physical button):

    • Connect your iPhone to PC with iTunes.
    • Press and hold the Home and Power buttons at the same time. You need to hold for ten seconds.
    • Then stop holding Power.
    • Keep the Home button pressed for another 10 seconds.
    • If your screen is blank, your iPhone is in DFU mode.
    • Now, when you launch iTunes, you should receive the following message: “iPhone has detected iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes “.
    • You can restore your phone to factory settings or upload a backup.

    To exit this state: you need to hold down Home and the power button.

    How to enter DFU mode on iPhone with TouchID (touch button. From iPhone 7/7 Plus):

    • Connect your iPhone to PC with iTunes.
    • Press and hold the Volume Down and Power buttons at the same time. You need to hold for ten seconds.
    • Then stop holding Power.
    • Keep the Volume Down button pressed for another 10 seconds.
    • If your screen is completely blank, your iPhone is in DFU mode.

    To get out of this state: you need to hold down Power and Volume Down.

    • Connect your iPhone to PC with iTunes.
    • Hold down the Volume UP button for a few seconds. Letting go.
    • Then press the volume down button. Letting go.
    • Then click on Power until the screen goes out.
    • When the screen goes out completely, press the volume down button again.
    • We hold until the screen turns off completely and this will mean that your phone is in DFU mode.

    The Apple logo should not be in DFU mode! If it appears, then you did something wrong. Repeat your steps one more time.

    You can get out of this state if: press Volume Down and Power.

    Why iPhone freezes on apple

    There are many reasons why your iPhone can turn into a brick with an eternally rebooting apple.

    Some of the most common are:

    • Incorrect iOS update
    • Error in the system application
    • Low battery
    • Poorly performed jailbreak process
    • Processor problems
    • Poor repair
    • Falls / hits
    • Contact with moisture
    • Installing beta versions of iOS
    • Overheating / overcooling iPhone

    Next, we will take a closer look at the main reasons that can lead to the fact that your iPhone is constantly restarting and how to fix this problem without harm to your iPhone.!

    IPhone hardware problems

    Let’s start with the unpleasant. If your iPhone was prone to drops, shocks, contact with water or poor-quality repairs, after which, in fact, a problem appeared in the form of a permanent apple on the screen. you need to contact a service center.

    The cause of the breakdown may be a faulty / outgoing cable, damage to the iPhone processor or its other components. Apple iLab Service Center Wizard will help you fix such problems.

    What to do if iPhone stuck on apple and won’t turn on

    Is your iPhone stuck on an apple and you don’t know what to do? We have prepared instructions to help you get out of this unpleasant situation.

    A white / black screen and an apple with a constant reboot is probably one of the most frightening pictures for an iPhone owner. Although, if you understand and know how to act in this situation, then you will understand that everything is not as bad as it seems.

    Follow our instructions and you will undoubtedly be able to fix the problem with the frozen apple on the screen of your device.

    IOS / app or jailbreak issues

    Apple has highlighted the need for users to responsibly update their iPhone many times.

    • Have enough memory on the device to update;
    • Create a backup before updating;
    • Charge your iPhone at least 50% or put it on charge;
    • Provide a stable Wi-Fi connection;
    • When starting the update, you cannot restart or interrupt the download.
    Read more:  Find Out Your Forgotten Apple Id

    IPHONE 3, 4, 5, 6, 6. 6s, PLUS: SOLUTION TO FIX “APPLE LOGO STUCK” ON SCREEN

    Many users ignore these facts, install low-quality beta, carry out the jailbreak process, and then suffer from the fact that the iPhone freezes on the “apple” and does not want to work. I do not recommend doing this.

    What to do if iPhone is frozen on apple

    But, if you’ve screwed up a little, there is still a safe chance to bring your iPhone back to life without going to a service center. Read about it below.

    Method 1 Force reboot

    • Hold down the Home button and keep it pressed for 10 seconds
    • After the screen goes out, press the Power button again until the Apple logo lights up.
    • The phone will restart on its own and the logo will disappear, if there was no serious system damage on the device.

    For iPhone with TouchID (iPhone 7 to iPhone 8)

    • Press on Power and volume button.
    • Everything goes out, the Apple logo appears again.
    • Then turn on the device again.

    For iPhone with FaceID (and iPhone SE (2020)):

    • Click on the Volume up button.
    • Then press the volume down button.
    • After that, hold down Power for 10 seconds.
    • iPhone should restart.

    Please note that you will need to enter your device PIN to continue using it.

    Method 2 Enter iPhone Recovery Mode

    IPhone recovery mode involves resuming the firmware of the device. All procedures are done using iTunes.

    Here’s how to use recovery mode:

    • To get started, you need a PC with iTunes installed and a USB-A to Lightning or USB-C to Lightning cable.
    • Connect your iPhone to PC.
    • Open iTunes on PC.
    • Press and hold the Home and Power buttons at the same time.
    • Keep holding the buttons even after the recovery menu appears.
    • Release buttons, connect iPhone to iTunes / Finder.
    • Hold down the power and volume down button.
    • Keep pressed until the recovery screen appears.
    • Connect to iTunes / Finder for recovery.

    For iPhone 8 and later:

    • Press the Volume Up key for a few seconds.
    • Repeat with Volume Down.
    • Then pinch and hold Power.
    • Release when your iPhone connects to iTunes.
    • You should see the following message: “The iPhone has a problem that needs updating or repairing.”.
    • After that, click “Restore” and wait for the download.

    Using Recovery Mode if iPhone won’t turn on

    In order not to lose information on the iPhone, you can try using the recovery mode, aka Recovery. This method will be most effective if the problem occurs after a failed system update. The smartphone will reinstall iOS without erasing your personal data.

    • Connect iPhone to Computer Using Lightning Wire.
    • If you have an iPhone 7 or older, press the Power and Volume Down buttons at the same time. If the older iPhone is the Home and Power key.
    • Wait for the notification that the smartphone is put into recovery mode, and follow the advice on the PC screen.

    How to Hard Reset iPhone without Button

    New iPhones don’t have a Home button. Namely. on the iPhone X, iPhone XS / XS Max, iPhone XR, iPhone 11/11 Pro / 11 Pro Max. But even for them, you can perform a forced reboot if the iPhone does not turn on, and the apple is on.

    The process is a little more complicated than for older models.

    • Press the volume up button and release it.
    • Then press the volume down button.
    • Hold the power button and hold it until the screen goes out (the Apple logo disappears), and the device starts to reboot.

    How to Force Restart iPhone with Home Button

    Older iPhones are still equipped with a Home button. these are all devices from the first iPhone to the iPhone X. The most popular of them are: iPhone SE, iPhone 5 / 5s, iPhone 6 / 6s / 6 Plus / 6s Plus, iPhone 7/7 Plus, iPhone 8/8 Plus.

    • If you have a sixth iPhone or an older model, to restart, you need to hold down the Home button and the power key for about 10 seconds until the apple icon disappears from the screen. Also it shouldn’t blink.
    • If you have an iPhone 7 or older, press and hold the Volume Down and Power buttons at the same time until the white manufacturer logo disappears.

    During the reboot, the phone will restore all disturbed processes and start up normally. Remember that after this you will need to enter the password from your Apple ID account.

    What to do if iPhone is frozen on apple

    After updating or rebooting, it may happen that the iPhone freezes on the apple and does not turn on. How to solve this problem and start the smartphone again, read our article.

    The long-awaited iOS 13 update has recently been released. we talked about its main features in a separate article. Sometimes an upgrade carries not only cool features, but also a bunch of bugs. Sometimes installing an update leads to the fact that the smartphone freezes at the boot screen and does not want to turn on. Also, this problem may occur after restarting the device. Sometimes iPhone freezes when connected to PC or unsuccessful Jailbreak. what is it, read here.

    Less commonly, the problem occurs due to the hardware. usually after an unsuccessful or self-repair. To prevent such a sad outcome, we advise you to use only the advice of Apple Authorized Service Centers.

    Fortunately, in many cases, everything is easy to fix on your own without contacting a service. We will show you a few proven methods that will help revive the iPhone, which turns on and off before the apple.

    Hard restart when iPhone won’t turn on and apple is on

    Turn off and on again. this method helps in most cases, not only when iPhones break down, but also with PCs, routers and mobile gadgets. The process for starting Hard Reset depends on your iPhone model.

    Recovery via DFU mode

    In case your iPhone does not turn on, the apple burns and goes out when you reboot, there is a special firmware update mode, it is also the DFU (Device Firmware Update) mode. When it is a forced rollback of the system, error diagnostics and emergency device update.

    If the option with reboot and recovery did not help you, then DFU will become a kind of “plan B”. We still do not recommend starting with it. try Hard Reset and Recovery first, and if nothing works, proceed to recovery via DFU.

    DFU mode works mostly on older iPhones. Here’s how to turn it on.

    • Connect iPhone to PC using iTunes.
    • Press the Power and Home buttons at the same time, as if rebooting, and hold them for ten seconds.
    • Release the Power key, but hold Home until iTunes displays a message that the smartphone has entered DFU mode.
    • Follow the on-screen instructions to reset iPhone settings.

    Unlike the Recovery mode, the DFU works with the screen off, on which no icons are displayed. All data will be deleted from the iPhone during the firmware update; you will have to re-enter your Apple ID and adjust the iOS settings. To avoid losing important files when you reset your device, save them in advance to another medium or in the Apple cloud. We wrote more about backup in a separate article.

    Contact service

    If the tips above didn’t work for you, it might be a hardware issue. Have you recently repaired your iPhone with a questionable service? Or maybe they tried to replace something inside the device themselves, but after the repair there were extra parts left?

    If you bought a gadget recently, you can contact Apple support and take advantage of the warranty. If the device is more than a year old, you should find a reliable service center and show the device to specialists. Read more about iPhone repair. on the manufacturer’s official page.

    Apple on iPhone: what to do if your smartphone freezes or restarts on the boot screen

    Sometimes iPhone owners are faced with an unpleasant phenomenon. the Apple logo appears on the screen and the device stops showing signs of life. Typically, this happens after installing updates or crashing applications. iPhone freezes or restarts “on apple”, making it impossible to continue using it. What to do in this case, we will tell you below.

    Refresh iPhone in Recovery Mode

    If a hard restart doesn’t work, try updating your iOS in Recovery Mode. This method allows you to reinstall the operating system without changing the data stored on the device. However, it is only effective if the logo screen appeared as a result of a glitch during the iOS update process. If the problem is related to the hardware “stuffing” of the device or jailbreak, this method will not help.

    To update iOS in recovery mode, you need a desktop computer with the latest iTunes and a USB cable.

    On iPhone 7, you can activate recovery mode by simultaneously pressing and holding the power button and the volume down control until the smartphone turns off. Then, on your smartphone, hold down the volume down button and while continuing to hold it, connect the iPhone using a USB cable to a computer with iTunes installed. After about 10 seconds, the iPhone will display the iTunes logo with the cable, and iTunes will display a notification on the computer that the iPhone has been detected in recovery mode.

    On earlier iPhones, recovery mode can be activated by simultaneously pressing and holding the Power button and Home button until the smartphone turns off. Then, on your smartphone, hold down the Home button and while continuing to hold it, connect the iPhone using a USB cable to a computer with iTunes installed. After about 10 seconds, the iPhone displays the iTunes logo with the cable, and iTunes on the computer displays a notification that the iPhone has been detected in recovery mode.

    The above steps will allow you to update your device’s firmware. If the logo screen does not disappear, try all over again, but select “Restore”. Please note that in this case, all iPhone settings will be reset to factory settings (all data will be deleted). You can restore them from backups.

    What to do if the logo screen does not disappear and the iPhone is still not working

    If rebooting your device, updating the firmware, and even performing a factory reset didn’t work, the issue might be hardware related. In this case, it is best to contact a service that specializes in repairing Apple products.

    Factory reset (flashing) iPhone in DFU mode

    You can get rid of the logo screen by performing a factory reset in DFU mode. In this case, all data on the device will be lost, so make sure you have all the necessary backups before proceeding.

    We talked in detail about how to enter the iPhone into DFU mode in this article.

    If the problem is jailbreak and you can’t uninstall the tweak or app, a factory reset in DFU mode is most likely the only option.

    Force restart iPhone

    Sometimes a forced restart of the device helps to get rid of an apple on a dark screen. iPhone 7 and newer models can be rebooted by simultaneously pressing and holding the power button and volume control for 10 seconds.

    To reboot older models, press and hold the Power and Home buttons for 10 seconds.

    We talked about the reboot in more detail in this article.