Ipad Disconnected Connect To Itunes

Table of Contents

How to unlock iPhone or iPad by guessing the lock screen password

The main feature of this method is that when it is used, all information is saved on the device, which is especially useful in the absence of device backups in iTunes or iCloud. There is also a significant drawback. From time to time you will have to reset the number of attempts in iTunes so that the system does not block the device.

To do this is quite simple, you need to connect your smartphone or tablet to a computer with iTunes installed (you can download it on this page at the very bottom). The timeout specified on the iOS device will be reset automatically, however, it is important that this device has already been connected to this computer before. Otherwise, iTunes will ask for permission to access the device.

Ipad Disconnected Connect To Itunes

When you click on the “Continue” button, the system will wait for a response from a smartphone or tablet, which you, for obvious reason, cannot perform.

In other words, you can reset the counter on the iPhone or iPad screen only on the computer with which this iOS device was previously synchronized.

“The iPhone (ifpad) is disabled. Connect to iTunes “: How to Unlock iPhone (iPad) After Entering the Lock Screen Password Wrong Repeatedly

Naturally, the lock screen passcode, like any other security feature, limits the number of attempts to gain access to the device. Depending on the version of the iOS operating system installed on the iPhone, iPad or iPod Touch, after a series of attempts to enter the wrong code, the screen displays “iPhone is disabled. Please try again in one minute “,” iPhone is disabled. Please try again in 60 minutes “,” iPhone is disabled. Connect to iTunes ”, etc. So, let’s conditionally divide the solution to the problem into two methods. Brute force and password reset.

Iphone (iPad) is disabled. Try again through. Or connect to iTunes: How to unlock?

Many users often encounter problems related to the lock screen passcode. The message “iPhone is disabled” appears if, for example, a child has repeatedly made an incorrect entry or the user has simply forgotten the digital code after a long period of using another device. The situations are different. But, there may be only a few solutions, consider the most relevant of them.

How to unlock iPhone or iPad via iOS recovery (flashing)

If there is no such computer (described above) or the data stored on the device is of no interest and the user is satisfied with the installation of the current current version of iOS, then the system can be restored, which will automatically reset the lock screen password.

You will find detailed instructions on how to restore iOS (flashing) in the article “How to flash an iPhone.”. In this case, only restoration in “DFU Mode” will help.

What to do when iPad is suddenly locked

  1. Use Find My iPhone as soon as possible with your own Apple ID password on iCloud.com or any other iPhone / iPad.
  2. If it works, then you can solve this problem yourself by unlocking the iPad and quickly changing the Apple ID password.

If the extortionists are serious about their bad business by changing the password, then before paying the scammers to unlock the device, contact Apple technical support. As a rule, they help to unlock in such cases, if you prove that the device is really yours. To do this, you need to present a photo of the device box with a clearly visible serial number and a receipt from an official Apple dealer about the purchase of the device.

Unfortunately, there are times when, for some reason, you may be denied support, or the box and receipt have not been saved. Then there are two less honest options:

  • Find a photo of a check and a box on the Internet and use Photoshop to make a “correction” of the serial number to your own, and then contact Apple technical support. on this at.
  • Contact a professional Internet service through which such issues are resolved, where for very immodest money they will remove the block from the iPad, which is locked. However, you will be calm, and the scammers will not receive a dime!

Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.

PC has a backup of your iPad without password

If the iPad has previously connected to iTunes, then you can try to unlock it by resetting the password using the recovery procedure:

  1. Connect the device to the computer where the iPad was previously connected and launch the iTunes program.
  2. Right-click on the device icon in the left column. Select the “Restore” command, specifying the most recent backup.

Ipad has never connected to iTunes before

If during connection appears: “iTunes could not connect to iPad because the device is protected by a passcode. You must enter a passcode on the iPad before the device can be used with iTunes ”, then to unlock the tablet, you must do the following:

  1. Disconnect USB from iPad.
  2. Turn off the device by pressing and holding “Power” for a couple of seconds until a red slider is visible. Move it. Wait for iPad to turn off.
  3. While holding the Home button, connect the cable to the tablet. Ipad should turn on.
  4. The “Home” key must be kept pressed until the tablet display shows: “Connect to iTunes”.
  5. When iTunes displays a message that iPad is in recovery mode, press “OK” and “Restore”.

If you can’t unlock your iPad in this way, you can try to “restore” it in DFU emergency mode.

  1. Connect your iPad to your computer. Open iTunes.
  2. Hold the Sleep / Wake button for 3 seconds.
  3. Without releasing the Sleep / Wake button, press and hold the Home button for 10 seconds.
  4. While holding the Home button, release the top Sleep / Wake button. The computer should detect a new device “Apple Mobile Device (DFU mode)” and install the driver on it.
  5. As soon as step 4 is completed, iTunes will detect the iPad and it can be unlocked by completely updating the software.
Read more:  How To Record Screen On Ipad

ATTENTION! It is important to know that after restoring your iPad, all information on the device will be deleted!

Tips to help you avoid crashing your iPhone

2. Ipad blocked by scammers

Example of a fraudulent message

In addition to the “forgotten password” option, some Apple technology users are faced with remote blocking of the tablet by fraudsters. You, completely unexpectedly, may see a message of the following type on the screen: “Your device is locked. To unlock, write to the mail. “Options for such messages can be very different.

How is this possible? It’s very simple. Ransomware hacks Apple ID. To protect your iPad from such scammers, it is better to use a mailbox on a more reliable service, for example, Gmail, to register. Apple strongly recommends setting more complex password options. Even “forces” users to make a secure code when they enter the iPad control page.

If you are the victim of a scam like this, the first step is to make sure the iPad is indeed locked. Often, scammers crack the Apple ID password, but are too lazy to change it to a new one. Thus, there is a great chance of unlocking the iPad without assistance.

You may also be interested in

If iPad or iPhone is disabled, connect to iTunes and reset passcode counter

The iPad is disabled. 6 attempts. Blocking minute, 10. Connect to iTunes

Greetings, dear friends. In the life of almost every forgetful iPhone, iPad and iPod touch user, an unpleasant situation can happen with a forgotten password set on the lock screen. Details of protection using a passcode can be found in the instructions. “How to set a passcode on iPhone”. The exact same password is set in the iPad and iPod touch.

If the password set on the lock screen of the iPhone or iPad is forgotten, we begin to remember it, and try to enter various options. As soon as we enter the wrong passcode six times, a message appears on the screen of the device: “Repeat the iPad is disconnected after 1 min”.

When we entered the ninth incorrect password, we saw on the iPhone display:

“IPhone is disabled, please try again after 60 min.”

We conducted all today’s experiments on iPhone and iPad devices with iOS 7.1 firmware. In some firmwares, if the passcode is entered incorrectly, the device increases the shutdown time for the iPhone or iPad, forcing the user to wait even longer for subsequent entries of the forgotten passcode. But there are firmwares in which there is a certain number of attempts, after which a message appears:

“IPhone is disconnected connect to iTunes”

If you are faced with a similar problem, maybe you forgot this password yourself or the children accidentally turned it on, then you should not be upset, because today we will consider two options for the development of possible further events.

If not brute-force, then reset password on iPhone or iPad

If your iPhone or iPad is disabled or has not yet been disconnected, and asks for a password, then you can simply take and reset this screen lock password, the only drawback of this method is that if you do not have a pre-made backup, then all the information in the iPhone will be lost. This second method may be needed in the following cases:

  • If you’ve tried method number one, i.E. Tried to guess the password by constantly resetting the counter, but your idea was unsuccessful and the iPhone (or iPhone tablet) still asks for the password. But you deliberately made the decision to reset this password, having lost all the accumulated information on it, since you do not have a backup copy either in iTunes or in the iCloud cloud service.
  • If you have a backup (backup) that you did not delete during iTunes cleaning. And they didn’t even try to guess the password, but just decided to reset it along with all the iPhone information. Remember, if your backup is encrypted, you will definitely need an encryption password when restoring information.

Resetting the security password for the lock screen set in the iPhone or iPad is performed by the recovery method, while the device is manually entered into Recovery Mode or DFU mode. The method has already been discussed here. “If you forgot the password in iPad and iPhone.” So, do not hesitate, follow the link and try. We carried out our experiment to reset the passcode counter on devices (iPad tablet and IPhone phone) with iOS 7.1 firmware, while the function to find iPhone (iPad) was not active, there was no password for restrictions either.

In our situation, we exceeded the number of password entries (10 or more attempts) and in the phone with the inscription: iPhone is disconnected, connect to iTunes, we managed to reset the counter and start entering the forgotten password again. The password could not be found, I had to reset.

How to put iPad into recovery mode

To put the tablet into recovery mode, you must connect it with a cable to a PC running iTunes. After that, perform a few simple manipulations:

  • Hold down the “Home” button and the lock button on the iPad at the same time, holding them for 10 seconds;
  • After 10 seconds, without releasing the “Home” button (!), release the lock button and wait another 10 seconds;
  • Itunes launched on the PC will display a message stating that the gadget is connected to it in recovery mode. Then release the Home button;
  • Click the “Restore” button in iTunes on your PC.

The device will be reset to factory settings. All that remains is to select the current backup in iTunes and “upload” it to the device.

Ipad disconnected connect to itunes

Today we were given an ipad on which the inscription burned:

“IPad disconnected connect to itunes”

This problem occurs when you tried to enter the password several times and your ipad or iphone is blocked and the inscription appears

“IPad is disconnected repeat after 1 min.”

In our case, this inscription appears on the sixth incorrect attempt to enter the password.

But if on the 9th attempt we do not guess the password, then the inscription on the screen changes to:

“IPhone is disabled, please try again after 60 min.”

Ipad is disconnected connect to iTunes what to do

Once I had to solve a problem with an error on iPad. Disabled: iPad connect to iTunes. Naturally, just connecting to a computer with iTunes did not solve the problem. For a solution, you need to enter the DFU (Device Firmware Update Mode) mode. A special mode in which all information and data from the device are deleted, i.E. The operating system is installed from scratch. What to do with the data? You ask. You can restore them from previously made backups (backups).

Immediately I will make a reservation that this device has not been exposed to third-party intervention. Jailbreak, this must be taken into account, since if you restore the iPad in DFU mode, the latest firmware will be installed on which jailbreak may not yet be available.

To enter DFU mode:

1. Open iTunes, connect iPad to computer.

2. Press and hold the Power button for 3 seconds.
3. Without releasing the top Power button, press the HOME button for 10 seconds
4. Without releasing the HOME button, release the Top Power button while continuing to HOLD the HOME button for 10 seconds.

Read more:  How To Install Instagram On Ipad

For those who do not understand what buttons are in question, the image below.

A window will appear on the computer / laptop monitor informing that a device is found in recovery mode. Click “Ok”.

After that, in iTunes, click “Restore iPad”.

We read and agree to the License Agreement.

At the top of iTunes you will see the update download indicator.

If the download is delayed and a window appears stating that it was not possible to connect to the iPad, do not click anything, just wait for the update to download. After that, you need to re-enter DFU mode on the iPad (described above) and click “Refresh iPad” in iTunes.

As a result, in iTunes you will see the installation of the new firmware.

After that, you will receive a “clean” iPad. Now you can restore all data from the backup.

Ipad is disconnected connect to iTunes what to do

You may also be interested in

Disconnecting the iPhone during a call: finding and eliminating the cause

Resetting the attempt counter

If you amuse yourself with the hope of remembering the password, but ten attempts are not enough for you, then in order to enter a combination of characters on the device again and again, you need to reset the attempts counter.

To do this, connect to your computer using the USB cable that comes with your mobile device. To avoid conflicts and problems, connect your iPhone to the computer from which you previously synchronized with the device. Otherwise, iTunes may not see the iPhone and the method will not work.

Sometimes, a simple connection to a computer may be enough to reset the counter, but if in your case everything is not so, then proceed to the next step.

  1. Run iTunes on your computer;
  2. When the program detects the connected device, right-click on the iPhone and select the “Synchronize” command;
  3. After the synchronization process has started, you need to stop it. To do this, click on the cross at the top of iTunes. If an arrow appears instead of a cross, then it should also be clicked to complete the synchronization process.

So, the counter has been successfully reset. Now you can again try to enter the combination of characters, which is your password to log into the iPhone. And even if the device is disconnected again, connect to iTunes, start the synchronization process, and this can be repeated until your problem is solved.

If iTunes cannot detect the device in normal mode, then you can try to solve this problem in another way.

Forgot iPhone password? Restoring access

If the owner of the iPhone has suddenly forgotten the password, most likely he will try to find it in his memory and start entering various combinations of characters that come to mind. After the user enters six incorrect combinations, he will see a message on the device that the device is turned off, and re-entering the combination of characters can be repeated in one minute.

If the user enters an incorrect combination of characters nine times on the iPhone, the device will be turned off and it will be possible to repeat the operation only after one hour.

Such a result of an incorrect password entry can be expected if the iPhone has the seventh version of the operating system. If the smartphone has other firmware installed, the device lock time may increase. After entering the password incorrectly 10 times, the screen will show that the device is disconnected, connect to iTunes.

If a similar situation has occurred on your iPhone: you forgot your password, or one of your relatives, nephews or children tried to enter your device without your permission, without knowing the password, and now it is locked, do not panic, this problem can be solved.

Restoring from a backup

This method can be called effective only in one case, when you have a backup copy of data saved through iTunes and in this version of the copy your iPhone is not password protected. And if this copy is also more or less fresh, then you are doubly lucky, you can safely proceed to restoring an iPhone from a backup, the process of which is described in detail in the above link, so we will not duplicate information here, feel free to go and start reading from the item “Process flashing in action “.

If your copy is also password-protected or you do not have a copy at all in iTunes, then the recovery process will not help you in any way and there is disappointing news for you. You will have to reset your iPhone and all the data on it, this is the only way to return the device to life.

Factory reset and reset iPhone

Not the most ideal option, the loss of all data is not buzzing, but since you are reading these lines, your case is completely deplorable. The reset process is described in a separate article, but before you leave this page, take a few tips:

  • Use iFunbox to save your photos and. Despite the phone lock, the program will be able to extract this data.
  • When notifying iTunes that you need to disable the “Find iPhone” function before zeroing, use the remote wipe for your iPhone, follow the link to read the section of the article “Deleting data using iCloud”.

So we have completed describing all attempts to recover and bypass a forgotten password on an iPhone, in conclusion, if you have iOS 7 installed, then the following may be useful to you, which demonstrates logging into the system using an OS vulnerability. You can use this to create a backup in iCloud, for example, thus when you restore your iPhone to reset your password in the future, you will have a copy of at least some data.

Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.

Reasons for the error: “iPhone is locked, connect to iTunes

Before deciding what to do next, you need to figure out the reason for the message that the iPhone is turned off, so connect to iTunes. This situation can easily arise as a result of repeatedly entering an incorrect password, for example, if:

  • You yourself have forgotten or changed it;
  • Someone from your family or friends confused the smartphone and tried to unlock it with their password;
  • An outsider wanted to access the device in your absence.

To prevent the device from blocking, you need to try to enter the password correctly and not exceed the limit of attempts. And of course, do not give it to strangers and children who may accidentally block access.

Accordingly, the options for solving the problem of how to unlock it, if the software says that the iPhone is disabled, connect to iTunes, depend on knowing the current password. It also matters whether you followed the backup procedure before the problem occurred. If in both cases the answer is no, then you can say goodbye to the data on the smartphone. Using the method recommended by the manufacturer will completely erase the contents of the device’s memory. This is done for security reasons so that random persons cannot view personal information on any device.

Read more:  Sony Xperia Disconnected Sim Card

A more gentle option, like unlocking the iPhone, if it is disabled and says, they say, connect to iTunes, is available if you have a backup. In this case, important data can be recovered.

How to fix the error: “iPhone is locked, connect to iTunes”

Apple technology, despite all its reputation, can also fail, baffling the user. over, while showing tips that your iPhone is locked, connect to iTunes: how to unlock it and prevent similar situations. We will analyze in this article.

Reset attempt counter

In some cases, when the device tells you to connect to iTunes to unlock your iPhone, you just need to follow this advice. If simply connecting to a computer with iTunes is not enough, try starting the synchronization procedure. It is not necessary to complete this process to the end, you can stop it with a cross or an arrow, if one appears. After that, try again to enter the password from the device.

How to unlock via hard reset iPhone

If the iPhone is locked and does not connect to iTunes. For example, the synchronization was not performed or was performed on another PC that has no access. The option with a full reset remains. The password will be destroyed along with other information.

First, you need to connect your smartphone to your computer, as in the previous method. Can be used with any PC or laptop with iTunes.

Then forcibly restart the machine. In new versions (8, X and subsequent), you need to quickly press the volume up and release, then just as quickly press the volume down once, then hold down and do not release the side button. Recovery mode should turn on.

For 7 and its Plus version, you need to hold down the volume down and side key.

Finally, in earlier versions, press the side / top key and “home”.

After that, a choice of options should appear.

You need to click on “Restore” and wait for the completion of the procedure. Then set up your iPhone as if it were a new device.

Keep in mind that all actions in this mode are allocated 15 minutes. If the program does not meet the deadline, you will need to forcibly restart the smartphone again.

Finally, there is another way how to unlock an iPhone without iTunes. Contact a service center. The procedure will be the same as in the options described above, the only difference is that you do not need your own computer, plus a consultant will help you.

Restoring from a backup

If the copying process was in progress, you can connect to Aityuns via a computer as usual, and then restore data and access to the mobile phone itself (you need the same PC).

Connect the devices with a cable and turn on iTunes. The program will display the smartphone icon. If you have set up automatic synchronization, wait while the application copies the data. You can also start the process manually if you click on the desired item in the device menu and then click the “Synchronize” button.

Next, you need to use a special button to restore. The program can warn about an outdated OS version. In this case, you need to update iOS to continue. Then you need to choose to restore from a copy.

Select the appropriate copy by date or size. If you used an encrypted save password, you will need to enter it to decrypt a previously saved copy.

On the device itself, you will also need to specify recovery from iTunes.

After that, wait until the end of the process. The password is cleared and you can use the device again.

Possible problems

If the iPhone is turned off, it says connect to iTunes, but when connected to a PC it only vibrates 3 or more times. You probably have problems with the cable or computer. Check it on another PC, using a different cord, or try restarting your smartphone. If these measures do not help, you should contact the service.

Method 2. Unlocking iPhone via Find iPhone

One of the most widely used methods to disable iPhone without fixing iTunes is Apple’s Find My iPhone feature. If you remember your Apple ID and passcode and Find My iPhone is enabled on your device. It allows you to track the device, as well as perform some remote manipulations with it, including erasing all information from the device. In order to unlock an iPhone without a password, you must:

Log in to your iCloud account from a web browser in the list of all devices select the iPhone or iPad whose password you want to reset Click “Erase iPhone” or “Erase iPad“.

How to unlock an iPhone with or without iTunes

If you’re unfortunate enough to have your iPhone completely disabled, don’t worry; below we will share the three main ways to unlock a disabled iPhone X / 8 / 8Plus / 7 / 7Plus / 6s / 6 / 5s / 5 via iTunes or without iTunes.

Method 1. Via iTunes to remove password

If you’ve ever synced your iPhone with iTunes, you can restore it. Including passcode from iTunes. In this case, the data on the device and its password will be erased.

Step 1. Connect your device to the computer that was synchronized.

Step 2. Open iTunes. If you are prompted to enter your password, use a different computer that also synchronized your device.

Step 3. Wait while iTunes syncs your device and creates a backup. After syncing and backing up complete, click “Restore [device]”.

Step 4. Click “Recover from iTunes Copy”. Then select your device in iTunes. Look at the creation date and size of each backup and choose the most appropriate one.

If you’ve never synched with iTunes or set up Find My iPhone in iCloud, you’ll need to use Recovery Mode to restore your device. Connect your iOS device to your computer and open iTunes, make a forced restart, select “Restore”.

What to do if iPhone is disconnected, connect to iTunes?

You received messages “iPhone is disabled, try again in 5 minutes” or even “iPhone is disabled. Connect to iTunes ”? If you enter the wrong passcode five times in a row, your iPhone will automatically turn off within 1 minute and an error message “iPhone is disabled” will appear on the screen. And if you enter the passcode by mistake 10 times, your iPhone will shut down completely and you have to restore it with iTunes.

Method 3. Password forgotten how to unlock iPhone via Tenorshare 4uKey tool

Tenorshare 4uKey. Is an iPhone unlock tool that allows you to unlock your iPhone / iPad without a password. This is the Most Effective and Easy Way to Fix Disabled iPhone without iTunes Backup.

Download and Install Tenorshare 4uKey on PC / Mac before we get started.

Step 1. Launch Tenorshare 4uKey and connect iPhone / iPad to computer via USB cable.

Step 2. After 4uKey recognizes your device, you can press “Start” to remove the iPhone passcode.

Step 3. Before unlocking iPhone password, download the latest iOS firmware from the Internet.

Step 4. When the software is downloaded to your computer, you can click “Start Unlock” to start restoring iPhone without passcode.

Step 5. The whole process takes a few minutes. Please keep your device connected to the system recovery process.

Step 6. When the iPhone passcode is successfully removed, you can set up your iPhone as new, including passcode, touch ID, and face ID.

2019-07-25 Update / iPhone Update Problems and Solutions