Invalid Asus account or password
Change WI-FI password
Instructions can be viewed in the format
Immediately after plugging into the outlet, the routers begin to distribute free WI-FI, which is available for connection. This is for quick connection and installation.
After connecting your Asus router for the first time, it is recommended to change the default password. To do this, enter the address of the admin panel 192.168.1.1 or 192.168.0.1 in the browser. Then you should enter the control panel using the standard username and password. Next, select the category “Wireless network”.
For dual band routers, select one of the signal configurations. 2.4 GHz or 5 GHz. After that, you need to set the “Authentication Method” parameter. Recommended type for maximum protection against hacking. WPA2-Personal.
Then, in the “pre-key” field, you must enter an 8-digit combination of characters containing Latin letters and numbers. The last action is to press the “Apply” command. After that, the WI-FI network will be temporarily interrupted. You need to go to her
What you need to know?
Features of setting and replacing default values for an Asus router:
- in order to enter the router interface, you need to know the username and password;
- if one of these indicators is lost, then a reset of all settings is required. This means that the device must be configured from scratch, and access to the network will be lost even for a local connection;
- You can make a replacement even without connecting any devices via WI-FI. This requires only a computer and a network cable.
When setting up the Internet for the first time, customization couriers change the default password in Asus routers to the serial number indicated on the box (S / N). For subsequent reconfigurations, it is recommended to use S / N as a password for equipment and WI-FI.
It is important to know that it is necessary to change the password of the Asus router when connecting locally. A computer or laptop must be connected to the router, with the help of which the changes will be made. The cable connects to any of the LAN ports on one side, to the connector on the computer’s network card, on the other side.
How to Unlock ASUS Laptop Forgot Password
Next, in the address bar of the browser, you need to specify the IP address of the device, enter the default login and key. The IP address and other factory data for accessing a specific model can be seen on the sticker at the bottom of the router. In most cases, the default address is 192.168.1.1. You should be aware that Asus wireless routers use a web interface, this allows you to configure the modem using any of the browsers.
Entering the settings is described in the following
To reset the existing settings, press and hold the Reset button on the back of the router for 10 seconds.
Many people do not understand the difference between resetting a router and rebooting it, thinking that they are the same thing. However, these are different things. To reboot the router, you just need to turn it on and off. A reset will result in the loss of all parameters and bringing them back to the factory settings. After resetting the data to the factory settings, it becomes possible to use the default secret code and set a new one.
If you forgot the password from entering the settings of the router
This happens most often. Each router’s control panel is password protected. There you need to specify a username and password. This is necessary to protect the settings so that everyone who connects to your network cannot access them.
If the router is new, not yet configured, then the default password and username are used. In most cases, these are admin and admin. Or there is no protection at all. We set or change this password already in the process of configuring the router. I always advise you to do this in my instructions. And there is even a separate article on changing / setting the admin password.
So, we changed this password, set up the router, and forgot it. And then we urgently needed to go into the settings, and we do not remember the password. On the authorization page, we indicate some kind of username and password, but nothing happens, the page just reloads, or we get a message that the password is incorrect.
ASUS : IP, username, password login of router | NETVN
That’s all, we can’t get into the settings. If you cannot remember this data, and perhaps you did not change the password, then you will have to reset the router settings. After that, we will go to the control panel using the factory settings, which are indicated on the bottom of the router, on the sticker.
To reset the settings, you need to hold down the button for about 10 seconds, which is usually signed as: RESET, WPS / RESET, Sros, Default. It all depends on the model of your router. The button can be recessed into the body, and you need to press it with something sharp. The router must be powered on. This button looks something like this:
After returning to the factory settings, to enter the control panel, use the data that is indicated on the router itself. If the factory data is not indicated there, then there is no password by default.
If you have any difficulties with resetting the settings, then on our website there are detailed instructions for most manufacturers. If you don’t find, write in the Комментарии и мнения владельцев, I will give a link.
If something did not work out, just write, we will try to solve your problem.
The Asus router has a factory IP address, as well as a standard username and password. To enter the settings, you should use the standard IP: 192.168.1.1. Username and password: admin.
It is recommended that you change these settings to protect your data. In this case, it is advisable to set complex combinations consisting of 7-8 characters and containing numbers, English letters, including uppercase ones, and special characters: @, #,%, etc. For an Asus router, the default password may be needed when setting up the network.
Connecting to the network after a factory reset
Routers are compatible with almost all Russian Internet providers. To connect, the main thing is to find out the communication protocol used by the operator in advance in technical support. Most of the major Russian providers use the PPPoE protocol. You need to select it in the router menu in the “WAN connection type” field.
Changing data from the web interface
To change the data from the web interface, you need to go to the “Administration” section using the default login and password. The “System” tab is selected, new key values are entered into the corresponding fields and confirmed. At the end, the data is saved by clicking the desired button at the bottom of the page.
If there is no local connection, changing the secret code or login can be done in an alternative way. via WI-FI. To do this, from any device, you can connect to the wireless network broadcast by the router and make the necessary settings.
I have repeatedly come across a situation when somewhere on a visit, when trying to connect to a Wi-Fi network, the owner said that he did not remember the password from the router (router). In response to “go to the settings and see” he looked at me in bewilderment, not understanding how to do it. And such cases are not uncommon.
People who are far from IT often do not understand the situation. We spent the Internet, installed a router, wrote down the network password somewhere on a piece of paper. and then there is no need to remember it. After all, smartphones, tablets, laptops of all households are connected to the network automatically, and you do not need to enter anything every time. And many people do not even know about the existence of the web interface of settings.
But what should you do if you find yourself in a situation where you have forgotten your router password and you need to connect to the network? This happens, for example, after buying a new smartphone or laptop, resetting an old device to factory settings, etc. There are several ways to remember the router password, recover it or change it.
If you forgot your Wi-Fi password and cannot enter the router settings
This is the first option in which we do not remember the password from our Wi-Fi network. And we may not be able to connect to it. And in the settings of the router, we need to go in order to see, or change the password.
- Firstly, we have very detailed instructions on what to do if you forgot your Wi-Fi password. You can view the password on your computer (if you have one). just remember it. Connect to the wireless network and go to the control panel.
- Secondly, you can go to the router settings from the device that is currently connected to your Wi-Fi. And already in the settings of the router, see the forgotten password, or change it.
- Thirdly, we connect to the router via a network cable, and go to the control panel. In this case, we will not need a Wi-Fi password at all. If you do not know how to connect to the router via cable, then here is a detailed instruction on the example of TP-LINK.
password recovery through router settings
This recipe helps if you forgot the password from the router, but you have access to it from another device. In this case, you need to go to the web interface of the router settings from a device connected to the network and open the wireless network menu. It’s easy to do.
Open a browser on the connected device, enter 192.168.0.1 or 192.168.1.1 in the address field (different routers differ). In the form that opens, enter your username and password, which are usually the same: admin and admin.
In the window that opens, you will see the router settings menu. Find the item responsible for the Wi-Fi settings in it. On my Asus RT-N11, you can open the network settings on the main screen (an icon with the image of a router) or in the “Advanced” menu, item “Wireless 2.4 GHz”. The names of the menu items on other routers and firmware may differ, but the section we need always contains in the name “Wireless network”, “Wi-Fi”, or “WLAN”, etc. words.
Go to the Wi-Fi settings menu on the router. Find the item responsible for protecting the network (may be in the “Security” tab, etc.), find the sub-items responsible for choosing the type of encryption and key. By default, the password field is hidden by asterisks, but there may be a “display” button next to it (it is indicated by an eye icon for me).
If everything went well, you will see the router password for accessing Wi-Fi. If there is no “display” icon, you need to enter a new network password. In order not to forget next time, it is advisable to write it down and save the leaf with the code.
password recovery using WPS
The first method is only suitable if you have another device connected to the router. If it is not there, but there is physical access to the router, you can try to connect to it via WPS. WPS (Wi-Fi Protected Setup) is a special standard for connecting to a router in semi-automatic mode, without a password.
First, inspect your router for a WPS button. It can be located both in the front and in the back and is usually signed. On my Asus RT-N11, this key is on the back, near the wired Ethernet connectors.
Open Wi-Fi settings on your smartphone or tablet. Go to the connection settings, find the “WPS Connection” item, activate it. The machine will switch to waiting for a connection.
Press the WPS button on your router. Do not hold it for too long, as this may lead to a reboot or reset of the router (more on that below). Once connected, the machine should connect to the router’s network without entering a password.
If the connection is successful, then you need to follow the instructions from the previous method. Go to the router settings (192.168.0.1 or 192.168.1.1, admin / admin), find the wireless network parameters there, check the security password or set it again.
Add a password to your local Windows 10 account via the Settings app.
Please note that this method cannot add passwords to accounts other than the account you are currently signed in to. If you would like to add a password to one of your local accounts, refer to the instructions in method 2.
Open the Settings app by clicking the icon in the Start menu or by pressing Win I on your keyboard.
Click on Accounts and then select Login Options.
Click the Password section, click the Add button to open the Create Password dialog box.
Enter your new password, enter your password again, then add a password hint if necessary, then click Next.
When you see the following screen, you need to click the Finish button to add the password to your local Windows 10 account. From now on, you will need to enter the password to log into your Windows 10 account.
Some notes
Note 1. When creating a password, make sure it includes at least one uppercase letter, a lowercase letter, a number, and a special character for added security. Please do not use easily guessed passwords such as 123, 12345, administrator password and passwords, as these are very commonly used passwords.
Note 2: Remembering strong passwords is not easy, especially if you use a unique password for all of your accounts. If your password is strong and not easy to remember, create a password reset disk so you can sign in to Windows 10 even if you’ve forgotten your account password. Alternatively, you can use this free password recovery tool to reset or recover passwords without booting Windows 10.
Note 3: you can add a password to the local account even if you are logged into your account with a Microsoft account, but you must have administrator rights on the PC.
How to add a password to a local account in Windows 10
When you create a local user account during Windows 10 setup or after Windows 10 installation, the Windows operating system allows you to set a password for the local account. But if you haven’t added a password to your account or one of your local accounts on your PC and want to password protect your account now, you can do so.
Note that standard account owners cannot add passwords to their accounts, but only administrators can.
add password to local account in Windows 10 through control panel
Please note that if you add a password to an account that is not associated with the account you are signed in to, your account will lose EFS encrypted files, personal certificates, and saved passwords for websites or resources. network.
Click User Accounts. In the next window, click User Accounts again.
Click Manage Another Account. Click Yes if you see a prompt to manage user accounts. If you are logged in as an administrator, you will be prompted for a password to continue.
Click on the local account that you want to password protect. This will open Change Account.
Enter your password, confirm your new password and add password options (optional), then click Create Password.
Disable password prompt on login in user account settings
The first way to remove the password prompt when logging into Windows 10 is very simple and does not differ from how it was done in the previous version of the OS. It will take a few simple steps.
- If your system is logged in not by a password, but by a PIN code, first disable them using both parts of this instruction: How to disable the request to create a PIN code and remove the PIN code in Windows 10.
- Press the Windows R keys (where Windows is the OS logo key) and type netplwiz or control userpasswords2 then click OK. Both commands will bring up the same account setup window.
- To enable automatic logon to Windows 10 without entering a password, select the user for which you want to remove the password prompt and uncheck the box next to Require username and password. If there is no such mark, the solution is described here: What to do if there is no item Require username and password in Windows 10.
- Click “OK” or “Apply”, after which you will need to enter the current password and its confirmation for the selected user (which can be changed by simply entering another login). Attention: if you are using a Microsoft account and the method does not work, try again, but in the upper field, instead of the username, enter the associated email address (E-mail).
In the event that the box is not marked “Require username and password”, go to Settings. Accounts. Sign-in options and check if there is an item “Require Windows Hello sign in for a Microsoft account”. If there is, disable and re-enter the automatic login settings. If not, run Command Prompt as administrator (how to do it) and enter the command (by pressing Enter after it):
After executing the command, close Command Prompt and restart your computer. Then repeat the steps described above. the item to disable the password prompt should appear. Also, the “Require username and password” option will be unavailable if your computer is currently connected to a domain. However, it is possible to disable the password prompt using the Registry Editor, although this method is less secure than the one just described.
How to disable password when waking up from sleep
You may also need to remove the Windows 10 password prompt when your computer or laptop wakes up from sleep. For this, the system provides a separate setting, which is located in (click on the notification icon) All parameters. Accounts. Login parameters. The same option can be changed using the Registry Editor or the Local Group Policy Editor, which will be shown below.
In the “Login required” section (on some computers or laptops this section may not be available) set “Never” and after that, after waking up from sleep, the computer will not ask for your password again.
There is one more way to disable the password request in this scenario. use the “Power supply” item in the Control Panel. To do this, opposite the current scheme, click “Configure power scheme”, and in the next window. “Change advanced power settings”.
In the additional parameters window, click on “Change parameters that are currently unavailable”, then change the value “Require password on wakeup” to “No”. Apply the settings you made. Not on all systems in the power supply parameters you will find such an item, if it is absent, we skip this step.
How to remove login password using Windows 10 Registry Editor
There is another way to do the above. to use the registry editor for this, however, it should be borne in mind that in this case your password will be stored in clear text as one of the Windows registry values, so anyone can view it. Note: below we will also consider a similar method, but with password encryption (using Sysinternals Autologon).
First, launch the Windows 10 Registry Editor by pressing the Windows R keys, type regedit and press Enter.
To enable automatic logon for a domain, Microsoft account, or local Windows 10 account, follow these steps:
- Change the AutoAdminLogon value (double click on this value on the right) to 1.
- Change the DefaultDomainName value to the domain name or the name of the local computer (can be viewed in the properties of “This computer”). If this value is not there, you can create it (Right mouse button. New. String parameter).
- If necessary, change the DefaultUserName to a different username, or leave the current user.
- Create a string parameter DefaultPassword and specify the account password as the value.
After that, you can close the registry editor and restart the computer. logging into the system under the selected user should occur without asking for a username and password.
How to enable automatic login to Windows 10 using Autologon for Windows
Another easy way to disable password entry when logging into Windows 10, and to carry it out automatically, is the free Autologon for Windows program, which is available on the official page https://docs.microsoft.com/en-us/sysinternals/downloads/autologon.
If, for some reason, the ways to disable the password at login, described above, did not suit you, you can safely try this option, in any case, there will definitely not be something malicious in it and most likely it will work. All that is required after starting the program is to agree to the terms of use, and then enter the current username and password (and the domain, if you work in a domain, is usually not needed for a home user, the program can automatically substitute the computer name) and click the Enable button.
You will see information that automatic login is enabled, as well as a message that the login information is encrypted in the registry (that is, in fact, this is the second method of this tutorial, but more secure). Done. the next time you restart or turn on your computer or laptop, you will not need to enter your password.
In the future, if you need to re-enable the Windows 10 password prompt, run Autologon again and click the “Disable” button to disable automatic login.
How to completely remove Windows 10 user password (remove password)
If you use a local account on your computer (see How to delete a Microsoft Windows 10 account and use a local account), then you can completely remove (delete) the password for your user, then you will not have to enter it, even if you lock the computer with the keys WinL. To do this follow these steps.
There are several ways to do this, one of them, and probably the easiest one, is via the command line:
- Run the command line as administrator (for this you can start typing “Command line” in the search on the taskbar, and when you find the desired item. right-click on it and select the menu item “Run as administrator”.
- On the command line, use the following commands in order, pressing Enter after each one.
- net user (as a result of this command, you will see a list of users, including hidden system users, under the names under which they appear in the system. Remember the spelling of your username).
(however, if the username consists of more than one word, also enclose it in quotes).
After executing the last command, the user’s password will be deleted, and there will be no need to enter it to log in to Windows 10.
How to turn off the prompt for a password when you wake up from sleep in the Registry Editor or Local Group Policy Editor
In addition to Windows 10 settings, you can disable the password prompt when the system wakes up from sleep or hibernation mode by changing the corresponding system settings in the registry. There are two ways to do this.
For Windows 10 Pro and Enterprise, the easiest way is to use the Local Group Policy Editor:
- Press the WinR keys and in enter gpedit.msc
- Navigate to Computer Configuration. Administrative Templates. System. Power Management. Hibernation Settings.
- Find the two options “Require password when waking up from sleep” (one for battery power, the other for mains power).
- Double click on each of these options and set “Disabled”.
After applying the settings, the password will no longer be prompted when exiting sleep mode.
There is no Local Group Policy Home Editor in Windows 10, but you can do the same using the Registry Editor:
- Go to the registry editor and go to the section (in the absence of the specified subsections, create them using the “New”. “Section” item of the context menu by right clicking on the existing section).
- Create two DWORD values (on the right side of the Registry Editor) named ACSettingIndex and DCSettingIndex, the value of each of them is 0 (it is like this right after creation).
- Close Registry Editor and restart your computer.
Done, the password will not be asked after Windows 10 wakes up from sleep.
How to remove password when logging into Windows 10
The instructions describe several ways to remove the password when entering Windows 10 when you turn on the computer, and also separately when you wake up from sleep mode. This can be done not only using the account settings in the control panel, but also using the registry editor, power settings (in order to disable the password prompt when waking up from sleep), or free programs to enable automatic login, or you can simply delete the password user. all these options are detailed below.
In order to follow the steps below and enable automatic sign-in to Windows 10, your account must have administrator rights (this is usually the case by default on home computers). At the end of the article there is also a video instruction, which clearly shows the first of the described methods. See also: How to set password on Windows 10, How to reset Windows 10 password (if you’ve forgotten it).
Sign out of your Google Account on Android?
How do I sign out of my Google Account on Android? Everyone who has a smartphone tied to the Android OS knows how important it is to set up a Google account on the phone in time. But it happens that the account starts to fail: the data is not updated, the contacts are not synchronized, then something else will happen. Why this account is needed is not worth writing. After all, the one who has already created it knows why he once needed it. Let’s go straight to the problem of how to log out of the Google Account on Android?
As a rule, there are no problems with linking mail to the phone. You just need to connect the gadget to the Internet, enter your password and login, then activation occurs, and all the necessary data will be added, contacts that were tied to the mail.
Trouble with a gadget occurs when a person does not know how to exit a Google account. The problem is so acute that sometimes a person thinks about completely deleting the account. Not worth it, because there are easier methods. When entering any of your data, do not worry that they will fall into the eyes of third parties. Everything is safe and you can safely use this method to return the gadget to its former speed and performance. It is necessary to do so
- Connect the gadget to the network;
- Find the “Accounts” tab on your phone. Go here;
- A list will be offered and in it you need to select the next item. “Google”;
- Next, “Accounts” and deactivate;
- Find the “Accounts” group and enter it;
- In the group, find an item called. “Account settings”;
- A list will appear in which you need to find the tab. “Delete account”, click on it.
Why is this happening? Simply because you can’t just log out of your Google account without deleting everything at once, along with that account. But, you can save all important information before deletion, transfer them to another resource, deal with the gadget and return everything back.
You can change your Google account password using a personal computer. This method will also help resolve the issue of how to sign out of Google Account on Android. It’s easy enough to change your email password. But, immediately it is worth knowing that the entered data will be visible to other people, however, if they are entered as an addition to other information that will be needed to fill out a personal profile on the page. That is, the following will be visible: Date of birth, Link to profile and social. networks, Information about me. Later, you can turn off this function and no one will know anything about you.
So, to use this method, you should proceed in this order:
- Enter such a query into a search engine. google.com. Go to this site;
- Take a look at the upper right corner, there you will find the avatar you uploaded. Click on it;
- A tab called. My Account will appear. Go here;
- A new tab with profile settings will appear. Here you need to find an item called. Security and Exit. Go here;
- Scroll through the menu and find an item called. Passwords and Account Login Method. In this tab, you can change when the password was last changed;
- Find an item in the tab. Password. Press and wait when prompted, enter a password that is valid from your Google account;
- Then you will be redirected to a page where you can change the password;
- Enter a new password, click on save new settings and connect the gadget to the network to update and deactivate your Google account.
The method is the most radical, but it is better to use it when other methods have been tried and they did not help. A full reboot and reset of all settings on the phone will help deactivate the Google account, and all data will be deleted. Absolutely all contacts and data, settings and records. everything will be deleted from the phone! The device will be clean, as if it was sold a minute ago. Therefore, before using this method, it is necessary to throw off all important information on an external drive: messages, phones, records, passwords, videos, photos Do not forget anything, because later, it will be impossible to return something.
So, it was decided to resort to a radical method. resetting the settings. You need to do this:
- The smartphone must be fully charged;
- Open a tab on the phone. settings;
- Find a group. system and devices;
- Go to the item called. Advanced;
- Go down to the very bottom of the proposed list;
- Find the tab. Restore and Reset, click on it;
- The system will require the owner to confirm this action;
- As soon as the user clicks on. OK. all settings will be erased, the system will reboot and the smartphone will be clean and functional.
- After rebooting, you can enter the saved information into the smartphone.
So, now it becomes clear that by registering in the Google system, filling out an account entry, confirming all actions, the user allows one more thing: he can be admitted into the account and not released again
No, the system will not do anything wrong with the user’s data, just registering is much easier than deleting the account later. However, there are at least three methods described above, from which you can choose the most convenient and more, without wondering how to sign out of your Google account on Android? The main advice, which works in all three ways. do not press the OK button until you understand what exactly you are confirming.!
Deleting your Google account and all user data (resetting the device to its original state)
This option is applicable in the following cases:
- If the owner does not remember his account password and cannot recover it.
- If the above methods of deleting an account do not work correctly or the function is blocked by a malicious program.
- Before selling a gadget and in other similar cases.
You can remove all accounts and all user information from your phone in different ways. The easiest way to do this is through the menu of the same application “Settings”. In my example, the reset button is under “Personal Data”. “Backup”.
On other firmwares, both the subsection and the button may have a different name and be located in a different place. In particular, on Samsung it is located in the “General” menu and is called “Backup and reset”, on some Lenovo. in the “Restore and reset” section (the “Factory data reset” button). On other devices. elsewhere. Check this in the user manual.
After pressing the reset button, Android will warn you that all apps, settings and accounts will be completely removed from your tablet or phone. If you agree, click “Reset settings” again and wait about 5 minutes. After restarting, you will get a pristine device.
If the device is protected by a password that you do not remember, you can perform a reset in a couple of other ways:
- Through the Recovery menu (Wipe Data / Factory Reset option). How to get to this menu, read the instructions for the device.
- By long pressing the recessed Reset button located on the phone or tablet case. On some models, it is hidden under the back cover.
An even tougher method of deleting an account, when absolutely nothing helps, is flashing the device through a computer, which is similar to reinstalling Windows on a PC. After that, of course, there will be no user data and applications either.
Warning: some tablets and phones are so tightly tied to the owner’s account that they require authorization under it even after a reset and flashing. And it is very, very difficult to bypass this request (there is no single solution, it is different for each brand of device). Therefore, as long as you have access to your Google account information, write down your login and password in a notebook or file on another device and store it in a safe place.
Standard way to delete an account, recommended by Google
This way is built into the Android function. It will suit you in the following cases:
- You have decided to transfer your gadget to the possession of a loved one and you are not embarrassed that he will get access to your data, contacts and applications, since you trust him.
- You need to delete your account to fix some glitch on your device.
- You want to log in under a different account.
You don’t have to worry about the data on your tablet or smartphone. After the demolition of the account, all information belonging to it. applications, files, contacts, personal settings, etc., will remain in place. If that suits you, let’s go:
- Launch the Settings app (Settings).
- Go to the “Personal” section. “Accounts and sync”.
- In the column on the right, select the desired Google account (Gmail email address).
- Tap the menu button in the upper right corner of the screen and select the “Delete account” option.
- Confirm consent to the deletion, enter a password, if necessary, and after the operation is completed, restart the device.
ways to delete Google account on Android
Something went wrong and the account is not deleted
Several times I had to deal with such an error. when trying to delete the only Google account on Android (the owner of the gadget), the operation hung and did not complete until you manually stop it. The account remained in place.
One of the solutions turned out to be extremely simple. It is for the case when you want to log in to the device under a different account, make it the owner, and delete the old one.
- Launch the Gmail app by tapping this icon.
- Open the menu hidden behind the “hamburger” button in the upper left corner of the screen and click “Add account”.
- If you already have another Gmail account, click Existing. If not, “New”. If you choose the second option, follow the instructions for registering a mailbox that you will receive next.
- Next, go to the settings of the “Mail Gmail” application again. Now there are 2 users. old and new. One (usually the old one) is loaded as the main one, the second is simply present in the list. Switch to the user you just added by tapping their icon.
- After that, click “Account Management” and repeat the operation of deleting the old one. Most likely, this time there will be no problems. The second account will remain the only one and will become the owner of the device. All files, contacts, settings and applications of the old account will be in place.
On different gadgets and in different versions of Android, certain points of this instruction may not work as described. But the principle is the same everywhere.
For those who have root rights
Those who managed to obtain superuser rights on their device have one more opportunity to demolish their Google account than others. You can simply delete the accounts.db file where Android stores account information. To do this, you need a file manager with access to protected service data, such as Root Explorer, and nothing else.
So, start Root Explorer, go to the / data / system folder (on separate firmwares. to / data / system / users / 0 /), open the accounts.db context menu with a long touch and select “Delete”.
How to find out the login and password from the Asus router?
1 Go to the router settings menu. To do this, open a browser and write 192.168.1.1 or 192.168.0.1 in the address bar. Enter your password, usually admin, admin. (you can look at all this data at the stickers that are pasted on the router).
How to connect to a router if you forgot your password?
Password recovery through router settings
Open your browser and go to your router’s settings page. Typically, this is http://192.168.0.1. Find the Security Settings menu. In the “PSK encryption key” section, the current password from Wi-Fi must be specified.
What is the IP address of the Asus router?
To access the settings of Asus routers, the address is used. 192.168.1.1 (although I don’t know how it is with the new models, maybe something has changed). The username and password are the data that must be specified when logging into the control panel. The standard User Name for Asus routers is admin.
How to check the operation of an Asus router?
- Disconnect all signal cables.
- Turn on the router. Find the “Reset” button on the case, press and hold it for 10 to 19 seconds. If you hold down the button for more than 20 seconds, the router will switch to emergency mode. Resetting the settings will be indicated by flashing, changing the number or order of LEDs.
How to reset username and password on an Asus router?
Press this button with something thin: a pen, a toothpick, something else and hold it for 15 seconds. When you see that the WPS indicator on the router starts flashing, release the button and wait about a minute until the router reboots with factory settings.
How to connect to an Asus router via the Internet?
[Wireless] How to enable web access from WAN on Asus router? (ASUSWRT)
- Go to the Administration section.
- Open the System tab.
- Check Yes in the Enable web access from WAN field. By default, the access port from WAN is used: HTTP “8080”.
- This option allows you to configure the Internet through a router.
Find your router account?
As a rule, it is indicated in the accompanying documentation or glued on the nameplate, which is stuck on the router stand. Most often, the default username and password are admin.
How to find out your username and password from the router?
It is usually located on the bottom of the case, or on the back wall. This sticker contains the IP address (usually 192.168.0.1 or 192.168.1.1), and below the default router login and password, that is, which are used in the initial configuration for authorization.
Invalid Asus account or password
If you are not yet a member of the Asus program. please register by following the Join Member link.
As soon as you successfully register with Asus. the system will send you a letter confirming that you have become a member. To activate your account, please follow the link https://vip.Asus.com/member/forget_activecode.aspx.
Attention! The confirmation email is only used to activate your account. You will need to use the password you selected during registration to enter the member’s website.
If you have not received a confirmation email from Asus, please go to the Asus Member Confirm section and follow the “Forget Verified Code” link. In this case, the system will send you a confirmation email again. If in this case you have not received a confirmation letter, please do the following:
Please make sure your email is functional. If you use a free e-mail server, the letter from Asus might not reach you. You can try using a different email address for registration. You can also check if letters from Asus reach your mailbox. by following the link send a test mail.
If the above measures did not solve this problem, please send an email from your registered mailing address to asusmember_activereg@csc.Asus.com.tw and in the subject line indicate: Asus Member Account Active of the letter may be empty. We will try to solve this problem and contact you about activating your account.
Attention! Please, specify exactly the subject of the letter, otherwise your letter may be regarded as spam and ignored.
Please make sure you are already a member of the Asus program. If you have not registered yet, please follow the Join Member link.
Please make sure that you have activated your account. You can learn how to activate your account by following the link How to activate your account.
Please check if you entered the correct password? Correct login password. the one that you chose during registration, not the one that you received in the confirmation letter from Asus.
4.If you have forgotten your password, please follow the link https://vip.Asus.com and select Forgot Password to receive a new password.
How to register a product
After activating your account, you can register the product in two ways:
After activating your account, you can register the product in two ways:
How to find out the login and password from the Asus router?
1 Go to the router settings menu. To do this, open a browser and write 192.168.1.1 or 192.168.0.1 in the address bar. Enter your password, usually admin, admin. (you can look at all this data at the stickers that are pasted on the router).
How to change the password for entering the Asus router settings?
In the settings go to the Administration tab. In the New password field, you need to specify a password to protect the settings. Enter the password twice and click the Apply button. After that, to enter the settings, use the new password.
What is the password for the Asus router?
In order to get into the web interface of the router, you need to open your Internet browser and type http://192.168.1.1, User Name admin in the address bar. Password. admin (provided that the router has factory settings and its IP has not changed).
How to find out your username and password from the router?
It is usually located on the bottom of the case, or on the back wall. This sticker contains the IP address (usually 192.168.0.1 or 192.168.1.1), and below the default router login and password, that is, which are used in the initial configuration for authorization.
How to reset password from Asus router?
Note: if you have forgotten the username or password from entering the router, please reset the parameters. 2-1 Click [Administration] [Reset / Save / Load Settings]. 2-2 Click [Reset] to reset the router to factory defaults.
How to connect to an Asus router via the Internet?
[Wireless] How to enable web access from WAN on Asus router? (ASUSWRT)
- Go to the Administration section.
- Open the System tab.
- Check Yes in the Enable web access from WAN field. By default, the access port from WAN is used: HTTP “8080”.
- This option allows you to configure the Internet through a router.
Where is the router account?
As a rule, it is indicated in the accompanying documentation or glued on the nameplate, which is stuck on the router stand. Most often, the default username and password are admin.