Installing ottplayer on Samsung smart TV
PlugAccess
The technology is the fastest among all of the above. For its implementation, you will need two conditions:
- PlugAccess support by home router.
- Regular flash drive (must be formatted).
If you have all this, you can start setting up:
- insert a removable drive into the router;
- one of the lamps should blink on the tethering device. When the flashing stops, you can remove the card from it;
- insert the flash drive into the TV and leave it there until the connection is made.
OTT-Player
This player is convenient when watching IPTV, it allows you to record videos, stop broadcasting, decode some signals of paid channels, create playlists that can be opened on any other device. To install, you need:
- Register on the site
- Activate mail
- Go to your personal account
- On the main page, click “How to watch”
- Select device
- Select player
- Make settings following the further instructions in your personal account
Peers TV
- opens access to more than 150 channels;
- watching films, TV series;
- it can be synchronized with a smartphone;
- a convenient player in which it is comfortable to control the viewing (pause, rewind, etc.).
Ott player on Samsung TV
How to connect the Internet to a TV for IPTV
Any IPTV setup on a Samsung Smart TV should start with its internet connection. This can be done in several ways:
- wire from the router;
- via Wi-Fi;
- using WPS;
- using PlugAcces.
Each method has its own nuances, so we will consider step-by-step instructions for each of them.
LAN connection
When it is not possible to use the distribution from the router or the TV does not have a Wi-Fi function, a regular LAN wire comes to the rescue. You will need to cook and do:
- cable of the required length;
- insert it with one end to the router, the other to the output on the back side of the TV with such a connector.
Next, you need to go to the settings menu and select:
- item “Network”;
- “Network settings”, “Start”;
- after that, in a new window, click: “Cable” in the “Connection type” section;
- the TV will connect to the network automatically.
It is recommended to prepare a password for the router in advance and then proceed with the configuration, which will take place in the same settings menu.
- in the “Network settings” section, specify the type “Wireless connection”;
- there will be a search for available networks, determine your own among them;
- specify a password.
After completing the setting, the screen will display a message about the successful completion of the operation.
Which TV models support IPTV
All Samsung TVs above the fifth series and released after 2010 can support digital TV. You do not need to buy any additional set-top boxes for this.
You can check a specific device according to a small diagram. To do this, you need its code series (indicated by the manufacturer on the back of the case).
It is better to write out the code on a piece of paper and compare the resulting letters with the decoding. Let’s take a look at the example of Samsung UE42ES7507. In this case, each value has its own meaning:
- the first two letters. type TV (U. LED), and place of manufacture (E. Europe);
- diagonal size (42 inches);
- year of issue. Each letter characterizes a certain year, the calculation starts from 2008. its letter A, then 2009. B, etc. In our example, there is E, that is, it was made in 2012 and such a TV supports the IPTV application.
- the next number indicates the series, it must be greater than 5.
When the check has been completed and it turned out to be sure of your Smart TV, you can start setting up.
Applications for viewing IPTV channels
To expand the capabilities of IPTV for Smart TV Samsung, you can download some applications that allow you to diversify the existing content, as well as watch: television, online movies and much more.
Among Samsung users, the most popular widgets stand out:
- OTT-Player;
- ViNTERRA.TV;
- Peers TV;
- SS IPTV.
Using WPS
- open the network settings, in the “Connection type” section, set WPS or PBC;
- at this moment, press the key with the WPS signature on the router.
The devices should connect to each other and the connection will be completed.
Where to download and how to install?
- The Simple Smart IPTV application works perfectly with any Samsung Smart TV models, the main thing is that the model series is not lower than “D”.
- Although the settings interface for different models is different, the essence of the actions when installing the program is the same, except for the “J” models.
- The sequence of actions to install the TV player “SS-IPTV” on the TV consists of the following steps:
Owners of J-Series models will need to do the following:
The application is now ready to use. After launching it, you can download playlists and enjoy watching high-quality interactive television broadcast.
Peers.TV application
Peers.TV is a convenient opportunity to watch digital TV and enjoy your favorite programs and TV shows at a time convenient for you.
To install the Peers.TV application, do the following:
Setting up OTTPlayer on Samsung Smart TV
The setup of the player in question on different devices is not so different, although it would be unfair to say that there are no differences at all.
They exist and are fundamentally important, of course, if the user is interested in watching his playlist normally.
Setting up this application takes little time, so users can simply follow the instructions and download a playlist in a few minutes to check if the system is working.
You do not need to restart the widget, the binding is automatic, so the user only needs to correctly carry out all the above procedures and after half an hour use the endless possibilities of the player in question. The main thing is that the program is working and the installation is correct.
Philips
The installation of standard widgets can be done through the App Gallery application, which is located on the main page of Smart TV. If you want to install a widget from a third-party developer, you need a USB flash drive.
The installation of widgets, the files of which are uploaded to the root of the drive, will start automatically. After the installation is complete, you will find the applications in the SmartTV menu.
Instead of a flash drive, you can use ForkPlayer to install third-party widgets. We have already told you how to install this application on Samsung and LG. Instructions for Philips:
Some Philips TVs run Android OS, so there is no problem installing applications, including third-party ones. widgets are added in the same way as on a phone or tablet.
Where to download and how to install OTTplayer for Samsung Smart TV
Smart TV is a technology without which a modern TV cannot be imagined. It allows you to enjoy watching your favorite TV programs, use the Internet and turns a standard TV into an analogue of a computer, albeit not with such a powerful technical potential.
In addition, users are specifically looking for smart TVs to customize additional functions on it. For example, install the OTT widget to watch not standard TV, but use more modern technologies, which require a good Internet connection to connect.
Then the user on his Smart TV will be able to watch various TV programs by downloading them as a playlist, and use other functions that are practically unavailable on a standard satellite or digital receiver. Of course, at first glance, this player may seem complicated, but in reality it is not. It opens up a lot of possibilities, so feel free to download it. It is the best player for online TV at the moment. Just imagine. a huge number of cool channels are formulated into a playlist and are available from any gadget where OTTplayer is installed.
- The application in question has not yet received the popularity it deserves, but we think that this problem will be solved over time.
- Already, many are trying to download OTTplayer for Samsung Smart TV in order to use online TV, which has recently become quite popular, as users finally appreciated its advantage.
- Watching online channels is a much more profitable and cheap way to enjoy your favorite programs, but without overpaying. So, by connecting the widget to Samsung TV, we get the following:
Get over 200 IPTV channels in Full HD quality from 4.5 per month. Including sports 50fps and strawberry. Connect! https://www.ottclub.cc
In general, the OTT player is one of the best options for installing on a Smart TV, of course, if the TV is connected to the network, and the owner knows how to manage channels or has a desire to learn.
Like any application, you need to download the player first. But on the Internet, there are two instructions that say that this is how you can get the application to work.
But users claim that they have a lot of problems, and sometimes the widget does not work at all.
There can be many reasons, but if you go back and remember that there are two instructions for installing the application in question, then maybe this is the case? What if one of them is not working? Let’s start by looking at the shortest and simplest one:
As a rule, after that, the program will already be on your TV, and when the setup is done, it will work in the desired mode. Below is another instruction, which, in fact, receives many complaints, therefore we do not recommend using it:
- Open the site ottplayer.es. this is the main page of the application, and register there;
- Download and unpack the webOS_OTTPlayer.zip archive to the root of the USB flash drive;
- Go to the TV and log in from your registered account to the page;
- Insert the drive with the file into the USB port of the TV;
- A message will appear indicating that the new device is connected.
The further procedure is as easy as shelling pears and consists in activating the file. But as already mentioned, this method is very unreliable and almost always does not give the desired result.
That is why it is better to download the widget in the first way. so there is a full guarantee that it will work, and the player can be used to watch TV content via an Internet connection.
Setting up IPTV on Samsung Smart TVs
Pre-read the codes for labeling TVs on the Smart TV setup page!
To watch IP-TV and WebTV on Samsung Smart TVs, use the OTT-Player applications. ViNTERA.TV, Peers.TV or SS IPTV.
Ottplayer for Samsung Smart TV: instructions for downloading and installing the widget
Smart TVs from Samsung are becoming more and more popular.
To get the opportunity to enjoy the benefits of Smart TV, it is not enough just to connect it to the global network and sign a contract with a provider, but you also need to be able to install special programs.
- Install Simple Smart IPTV
- Where to download and how to install?
- Loading playlists
- ForkPlayer
- How to download and install?
- Installing third-party widgets on Smart TV (for example Samsung, LG and Philips)
- Samsung
- LG
- Philips
- Setting up IPTV on Samsung Smart TVs
- OTT-Player app
- ViNTERA.TV application
- Peers.TV application
- SS IPTV (Simple Smart IPTV) App
- Where to download and how to install OTTplayer for Samsung Smart TV
- Setting up OTTPlayer on Samsung Smart TV
- OTTPlayer on Samsung Smart TV for Ukraine
- Setting up and installing ott player for Smart TV
- How to configure OttPlayer parameters
- Additional service features
Where to download and how to install OTTplayer for Samsung Smart TV
Smart TV is a technology without which a modern TV cannot be imagined. It allows you to enjoy watching your favorite TV shows, use the Internet and turns a standard TV into an analogue of a computer, albeit not with such a powerful technical potential. In addition, users are specifically looking for smart TVs to customize additional functions on it. For example, install the OTT widget to watch not standard TV, but to use more modern technologies, which require a good Internet connection to connect. Then the user on his Smart TV will be able to watch various TV programs by downloading them as a playlist, and use other functions that are practically unavailable on a standard satellite or digital receiver. Of course, at first glance, this player may seem complicated, but in reality it is not. It opens up a lot of possibilities, so feel free to download it. It is the best player for online TV at the moment. Just imagine. a huge number of cool channels are formulated into a playlist and are available from any gadget where OTTplayer is installed.
How to install OTT player on Samsung TV
Like any application, you need to download the player first. But on the Internet, there are two instructions that say that this is how you can get the application to work. But users claim that they have a lot of problems, and sometimes the widget does not work at all. There can be many reasons, but if you go back and remember that there are two instructions for installing the application in question, then maybe this is the case? What if one of them is not working? Let’s start by looking at the shortest and simplest one:
As a rule, after that, the program will already be on your TV, and when the setup is done, it will work in the desired mode. Below is another instruction, which, in fact, receives many complaints, therefore we do not recommend using it:
- Open the site ottplayer.es. this is the main page of the application, and register there;
- Download and unpack the webOS_OTTPlayer.zip archive to the root of the USB flash drive;
- Go to the TV and log in from your registered account to the page;
- Insert the drive with the file into the USB port of the TV;
- A message will appear indicating that the new device is connected.
The further procedure is as easy as shelling pears and consists in activating the file. But as already mentioned, this method is very unreliable and almost always does not give the desired result. That is why it is better to download the widget in the first way. so there is a full guarantee that it will work, and the player can be used to watch TV content via an Internet connection.
OTTplayer Features for Samsung Smart TV
The application in question has not yet received the popularity it deserves, but we think that this problem will be solved over time. Already, many are trying to download OTTplayer for Samsung Smart TV in order to enjoy online TV, which has recently become quite popular, as users have finally appreciated its advantage. Watching online channels is a much more profitable and cheap way to enjoy your favorite programs, but without overpaying. So, by connecting the widget to a Samsung TV, we get the following:
- The service will be available not only on Samsung Smart TV, but also on other devices where the player is installed and on which there is access to the Internet. Of course, there, too, you will need to go through the registration procedure, but this should not take much time, especially if this path has already been done on TV;
- You can use your favorite playlists anywhere in the world, of course, not forgetting that this place must have the Internet and devices with a player installed on it. If at least one of these components is absent, then television will have to wait;
- A huge number of manufacturers who have foreseen that users will appreciate the OTT technology and want to see the player in question on their devices. Therefore, there is such a variety of subscriber devices on the market that they work with various OS from Apple and Android to Microsoft;
- Requirements for guaranteed network bandwidth are reduced, since information is transmitted in segmented small streams. Of course, despite this, the network must be constant, otherwise the widget will not work, despite the fact that the configuration was done correctly;
- Low due to small infrastructure and lack of additional equipment.
Get over 200 IPTV channels in Full HD quality from 4.5 per month. Including sports 50fps and strawberry. Connect! https://www.ottclub.cc
Setting up OTTPlayer on Samsung Smart TV
The setup of the player in question on different devices is not so different, although it would be unfair to say that there are no differences at all. They exist and are fundamentally important, of course, if the user is interested in watching his playlist normally. Setting up this application takes little time, so users can simply follow the instructions and download a playlist in a few minutes to check if the system is working.
- Start OttPlayer;
- At the first start, the system will require you to enter registration data. Remember, you entered them when downloading the player and registering on its official website ?;
- When the widget starts, you need to go to the “Settings” section and fill in the “Username” and “Password” fields. It is important that the registration data completely coincide with those indicated on the site, otherwise you will not be able to connect the TV of the considered format to the TV;
- In the same section, you can configure additional functions, and then just press the confirmation of the procedure, otherwise the changes will not be saved, and you will have to repeat the procedure;
- After successfully passing the first authorization, the new user will be prompted to attach a new device or select a device that has already been registered. If you choose the second option, then you need to carefully review the list that will be displayed in front of the user on the site;
- Using the site, download and link the playlist to the new device. In this case, we are talking about a TV, so you can choose a playlist with the largest number of channels, use paid or free resources. it all depends on the user’s preferences and financial condition.
You do not need to restart the widget, the binding is automatic, so the user only needs to correctly carry out all the above procedures and after half an hour use the endless possibilities of the player in question. The main thing is that the program is working and the installation is correct.
detailed instructions on Installing widgets on Samsung Smart TV 2015 (J Series), can be found here.
IMPORTANT: All installation methods described below lead to the removal of all previously installed
custom widgets with red stripe “user”
For the “H” series, the instruction looks like this
Press and hold the B (green) button until the menu appears or press the Menu button if it is on the remote
2. In the Menu, select Smart Hub. Account. app. Sasmsung. Login
3. (once) select the “Login” button on the screen
4. (once) enter in the ID field the word: develop (exactly as it is written), uncheck the box and click Next
5.select the button on the Develop screen
6. press the Smart Hub button, select the top panel, to enter the full SmartHub
7. On the icon of any application (except for those recommended above), press and hold the Enter button for 1 second, a context menu will appear
8. (once) select IP Settings, press the Keypad button on the remote control, enter the first digits of the IP address (for example 192) of the server (see server on the computer), then press the OK button, repeat the entry for all four numbers
9. (once) repeat step 7, select Start User App Sync
10. close the message that appears and the context menu with the Return key.
11. if there are no problems, the installed widgets will appear in a few seconds (!), Perhaps they will be on the second screen, as indicated by the “My App (1/2)” button, click on the button with the Update icon next to them to see them.
Installation for series “E” 2012
We enter the Smart Hub, press the red button A of the remote control. In the field Samsung account, enter the login: develop. The password will be substituted by itself. Press the button “enter”. A portrait of a man with the inscription develop will appear in the lower left corner.
Press the Tools button on the remote control. the Service section will open. select: Settings. then: Developer. check the box I Accept. OK, then click. Server IP addresses. (IP Address Setting)
Next, go to the Synchronization of user applications. Enter. The synchronization process is in progress with the indication of the appropriate scale. after the end: exit the Smart Hub and go back in. Installed applications will appear at the end of the list.
For the “F” series, the instruction looks like this
Creating a new user “DEVELOP”
Create a new user in the TV set
Press the button on the regular Menu remote control (or the Misc button on the touchscreen, use the arrows to move to the Menu button on the on-screen remote control)
Select the menu item “Smart Functions”
We choose “Uch. app. Samsung “, select” Login ”
Enter “E-mail”: Develop
Enter the “Password” including the exclamation mark: sso1029dev!
We put a tick “Remember password”
Click “Login”
Exit the menu
Advice: On the point: Enter “E-mail”: Develop. typed the user: develop (not with a capital letter, did not accept with a capital letter).
Further, about the password: the password field was not active for me, remember the password too, so after entering the develop user, if the password field is not active, we immediately press enter and log in under the develop user.
Next, I’ll add something that was not in the instructions in the header:
– Go to Smart Hub
– Next, go to the Additional Applications item (located at the bottom)
– Then go to the Settings item (in the upper right corner)
– Go to the IP settings menu
– Enter the address (we are looking on the Internet or 89.238.91.17)
– Press enter
– Then go to the Synchronization line (also in the settings, located below) and see the widget loading scale.
And most importantly, before all these operations, make sure that TheDark SmartTV Server is ready to work. Otherwise, it will give an error during synchronization.
For the “C” series, the instruction looks like this
Creating a new user “DEVELOP”
Create a new user in the TV set
Press the Internet @ TV button on the remote.
Find and open the “Settings” menu.
Create a new user.
Select the user type: “develop”
Set PIN code: “PIN code”
Installing / updating widgets
Turn the TV on and off. And log in as a new user:
Go to Internet @ TV
Press the red button A to enter.
Select the develop user and enter the PIN selected in the previous paragraph.
Click “OK”
Add new IP address:
Login under develop
Open the “Settings widget” menu
Select the “Developer” option
Select “IP Address setup”
Enter IP. (we are looking on the Internet or 89.238.91.17)
Update the list of widgets:
Login under develop
Open the “Settings widget” menu
Select the “Developer” option
Select “Synchronize user applications”
Confirm your choice.
Click “OK”
Instructions in PICTURES for creating a new Develop user on Samsung Smart TVs (H, F, E, D)
IMPORTANT: All installation methods described below lead to the removal of all previously installed
custom widgets with a red stripe “user”
Installation for series “H” 2014
Press the MENU button on the remote control. If the remote control is touch-sensitive, press again, select the menu.
Enter the login develop. Leave the password blank. If it requires a password, enter sso1029dev! (With exclamation mark)
Select any application and hold the OK button on the remote for a long time until the Additional menu appears. Installation Select IP
Select any application again and hold the OK button on the remote for a long time until the Additional menu appears. Select Start User App Sync
After all the actions taken, we exit Smart-TV, otherwise the widgets will not appear.
HOW TO CONFIGURE OTTPLAYER SMART TV Samsung 2019
For series “D” so
Creating a new user “DEVELOP”
Create a new user in the TV set
Press the button on the SMART HUB.
Press the red button A to enter.
Create a user named: develop
Set PIN code: PIN code (6-digit number)
Click OK. You are in “Develop” mode
Installing / updating widgets
Press the blue button “D”
Select the last line “Developer” and click “OK”
Then go to “Server IP” and enter IP. (we are looking on the Internet or 89.238.91.17)
Then click “Synchronize”.
Widgets will be installed
Exit the installation to the menu.
press the red A button and exit the Develop user.
Now it’s important! We must leave Smart-TV, otherwise the widgets will not appear.
We go back and go to the end of the list. installed widgets appeared there.
Creation of author and distributor certificates. Way
Go to Tools. Certificate Manager.
Next, click on the Plus icon.
Put a tick on TV and click Next.
Enter an arbitrary name for the certificate.
Enter arbitrary Author name and Password, remember them or write them down, you may need it in the future. After clicking Next, a window will appear asking you to log into your account, click OK.
Enter the details of the account that was previously created on the Samsung website.
After a successful login, just click Next.
Next, enter the Password, you can be the same as previously created, leave everything else as it is.
If everything was done correctly, a window will appear with a message about creating certificates. Be sure to save the certificates in a different place, it is possible you can get them only once on the TV, the folder with the certificates is located in Drive: \ Users \ Username \ SamsungCertificate.
Installing and configuring the Tizen SDK
First of all, download and install everything you need on your computer. Download and install Java. after it download Tizen Studio with IDE installer. Be sure to download the appropriate 32 bit for your Windows. X86 or 64 bit. X64.
Launch the downloaded Tizen Studio installer, agree to the license, change the installation path if necessary and click Istall. After the installation is complete, click Finish. Package Manager will start, if this did not happen then go to the folder that you installed tizen-studio \ package-manager and run package-manager.exe or PackageManagerV2.jar.
Click install opposite Tizen SDK tools.
Next, click on the Extension SDK tab and click install opposite Extras.
While the Tizen Studio packages are being downloaded and installed, go to the Samsung website and register.
After registration, we find out the IP address of the computer. We go to the Network and Sharing Center. Local network connection (or wi-fi). Intelligence. Your address will be in the IPv4 line.
Moving on to the TV. We go to Smart Hub, then to the Applications section and press the numbers on the remote control 1-2-3-4-5 one by one. In the window that appears, select ON and press Enter, enter the IP address of the computer in the empty field and then click on OK.
After that, the TV will ask to restart. For a more accurate result, turn it off from the remote control and unplug it for 30 seconds.
Turn it on and go to Applications again, the Developer Mode should appear.
We enter on the TV into our previously created account on the Samsung website. Click on the plus sign and enter your data.
Now we find out the IP address of the TV, press the Menu button and go to the Network. Network status, select IP Settings and see the address.
We return to the computer, wait until the installation of Tizen Studio is completed and run it, it is located in the folder where you installed, tizen-studio / ide / TizenStudio.exe.
After downloading it, click on the TV Connection icon, click on Plus, enter an arbitrary Name, the IP of the TV that you learned earlier and click Add.
Installing applications on Samsung Smart TV T, R, N, M, Q, K and J series running Tizen OS
In this article, we will consider the installation using the new development environment Tizen Studio, the previous article with the Tizen SDK is outdated, since it was removed from the official site. This installation method is suitable for any device with Tizen OS, Samsung Smart TV T / Q (2020), R / Q (2019), N / Q (2018), M / Q (2017), K (2016) and J (2015) ) series. On J series, after restarting the TV, the application is deleted.
Creation of author and distributor certificates
Go to Tools. Certificate Manager.
Next, click on the Plus icon.
Without changing anything, click Next.
Without changing anything, click Finish and OK.
Creating a project in Tizen Studio and installing applications on the TV
Click on the project creation icon, select Template and click.
In Custom, select TV-Samsung v3.0 or TV-Samsung v4.0, depending on which one you have available, click Next.
Enter an arbitrary Project name and click Finish.
Download and unpack the application for Tizen TV GetsTV or Others. Open the archive with the application files and drag it into the project, agree with everything.
Next, right-click on the project name and select Run As. 1 Tizen Web Application. If everything is done correctly, the application will start on the TV.
