Insert SIM card on Xiaomi redmi 7

What to do if the tray does not open (stuck or bent)

Often owners of Xiaomi smartphones are faced with a situation where the tray does not extend at all when pressed, or appears a couple of millimeters and does not pull out completely.

This usually happens if the SIM card inside the case is caught on the internal parts. Perhaps it was not properly cut to micro- or nano-format, or inserted the wrong side.

Some users try to make a “sandwich”: they paste together the chips from the SIM card and memory card in order to use cellular communication and increase the memory of the phone at the same time. In fact, such homemade gadgets often lead to problems with the tray.

Regardless of the cause of the problem, the stuck slot needs to be removed somehow. There are a few recommendations on this subject:

  • if you use a standard paper clip, try to put a little more force (smartphone will not hurt, and the tray may well move further);
  • do not poke the hole with a needle or pin, since they may pierce internal parts and cause serious damage to the device;
  • if the tray is slightly extended, try to put something thin (a blade, a piece of foil) into the slot, and gently wiggle the construction.

As a rule, as a result of such actions the slot does detach from the case.

Sometimes the contacts inside the smartphone bend, or the tray itself bends. In this regard, do not press with a paper clip or pull the slot as hard as you can: parts can simply break.

At last, the last way to cope with the problem is to disassemble the phone. An ordinary user is unlikely to be able to do this, so it’s better to contact a service center so as not to make the situation worse.

Quite a common problem of old firmware versions is impossibility to activate SIM card in Russian. So try to change the system language to English. The procedure is as follows:

  • First, you need to log out of your Mi account. To do this, go to the Settings section of the Mi Account Exit
    insert, card, xiaomi, redmi
  • Now change the language: Settings Advanced Settings Language and Input select English
  • Log back into the account and the sim should activate
  • Change the language back to Russian

In some cases you may need to reboot your smartphone after these manipulations.

How to insert the SIM-card into Xiaomi phones

The SIM-card is an electronic chip, which is an identifier of a subscriber in the cellular network. The SIM is your identifier in the network. With your SIM card data, the cellular operator knows what phone number you own, what data plan you have and where you are. Yes, the operator knows where you are because the phone is always connected to the cellular network. The operator has the exact coordinates of each tower of the cellular network, so he can roughly figure out where any subscriber who is connected to the network. Of course, the accuracy of determining your location is very low, with an accuracy of more than 100 meters, however, this is enough for most tasks.

It’s thanks to the SIM card that you insert into Xiaomi, the phone becomes yours, t.е. it receives calls, message and Internet traffic that is intended for you and not your neighbors.

How to insert SIM card into Xiaomi or Redmi?

So, you finally bought your new smartphone from Xiaomi or Redmi, now it’s time to put your SIM card in it. Let us tell you how to do it right. Relevant for most of the company’s smartphones, including the Redmi 8, Redmi Note 8, Redmi Note 8T, Redmi 7A, Redmi 9, Redmi Note 9, Redmi Note 9 Pro, Redmi 8a, Mi 10, and so on.д.

Take the smartphone in your hands and find the tray on one of the side edges. This is what it looks like in our example (Redmi Note 8T):

Then take the paper clip that is included.

And lightly press. If it doesn’t work, put a little more effort.

If you did everything correctly the slot will show up and then you have to take it out with your hands. Remember how it is positioned in its seat.

As you see, in our example there are two separate SIM card slots. If you have two sims, insert both (NanoSIM format). If one, insert one. The first slot is the one closest to the memory card slot, although this does not play a special role you can use the second slot.

Now gently take the tray with the SIM card and insert it into the seat exactly as it was before.

If everything is done correctly, you will be prompted to enter the pin code from the SIM-card, if it is enabled on it, or you can immediately call your friends and family just wait for the communication signal to appear in the status-bar.

If the SIM-card has a different size, it is easiest to go to a salon of your operator and change the SIM-card new kit usually supports all three popular sizes of SIM, you do not have to cut anything.

Most Xiaomi smartphones have support for two SIM cards. You can install in Xiaomi both micro-SIM and nano-SIM.

The smartphone also has the ability to insert a memory card instead of nano-SIM, then in this case you can only use a micro-SIM and memory card.

Clever people on the internet have invented a way to use two SIM cards and a memory card, called “Sandwich”. It is not always possible to cut the nano-SIM properly and it does not always fit.

Before you insert the sim card into Xiaomi, prepare a paper clip to remove the tray. (it is in the box with the phone). It is better to work above the table with another flat surface so that you can easily find the dropped out card or slot. If you have lost the part, you can use an ordinary paper clip (without the plastic cover) and unscrew it first.

Do not insert needles or other sharp objects into the hole in the slot; this could damage the mechanism.

  • Insert the thin end of the paperclip into the hole beside the SIM card slot.
  • Press lightly until the tray extends slightly beyond the housing.
  • Pull out the paper clip, and then gently use your fingers to gently pull the slot all the way out.
  • Insert the SIM card or flash drive into the appropriate slots. due to the special shape of the case it is impossible to install them incorrectly.
  • Push the tray back into place until you hear a slight click.

Xiaomi supports MicroSD memory cards, when using drives below class 10, the system may give a warning that the flash drive is too slow for this device.

To put the cards in Xiaomi Redmi Note (or other model) is recommended only when the smartphone is turned off.

Xiaomi redmi note 7 how to insert sim card and sd memory card

How to cut the SIM card yourself

Before inserting the SIM card into the Redmi, it’s important to make sure it fits.

If the card is larger than necessary it must be trimmed. It is easier and safer to do it in any branch of the mobile operator, the more so that the procedure is often free, but also to reduce the size of the SIM itself is also possible:

  • Put the tray of the phone to the card and use a needle to mark the contours of the cut, taking into account the location of the chip;
  • Carefully cut out the desired part along the marked scythe line;
  • try the result on the slot; if it turned out to be slightly larger, adjust its dimensions with a fine sandpaper or nail file;
  • Put the tray back in place and turn on the gadget. if everything has been done correctly, the display will show the mobile operator’s logo.

Gestures

To activate the function, you need to enter the “Settings Menu”, then “Unlimited Screen” and switch to the “Fullscreen Gestures” window.

Control icons, menus, keyboard input using gestures:

  • Tap the display: open an app, select a menu item, press a button, or enter a character using the on-screen keyboard, tap.
  • Tap and hold: to access options, tap and hold the item for more than 2 seconds.
  • Swiping: Swipe left or right on the desktop or apps screen to view other panels. Swipe up or down to scroll through a web page or list.
  • Pinch: spread your fingers apart on a webpage, map, or image to zoom in, and vice versa to zoom out.
  • Move: Tap and hold an item to move it.
  • Double-tapping: double-tap on a Web page or image to zoom in.

Important! Gesture customization feature available on Miui 9.5 firmware.

Review of Xiaomi Redmi 7A is not a shameful budget maker for 2 SIM cards and memory card

A thorough review of the smartphone Xiaomi Redmi 7A 2/32 gb and 2 SIM cards plus memory card. Not an embarrassing smartphone for a hundred bucks and in 2019.

How to choose a smartphone for 2 SIM cards and memory card or why Xiaomi Redmi 7A?

So, I needed a budget smartphone for 2 SIM cards memory card. Or rather I didn’t need it, my older brother ran out of his previous smartphone. My brother is in his not-young age, so not-young that retirement is on the horizon. But the reality of the world is that whether you’re 16 or 56 you’re going to need a Vyber/Telga, chrome and access to the Internet from your smartphone. I would also like a smartphone to live longer and cost less.

In general, my brother does not know anything about smartphones and asked me to pick up something similar. Given the trust placed in me, I had to choose something that is not_shameful and immediately discarded the choice of homtoms and duggs as a class of technology.

over, my brother also lives in the village and if you start to lag that proximity sensor or suddenly some sim card starts failing, the firmware flies down, there will not be a man around to fix the situation. I wanted a smartphone that would probably behave decently. Also rejected models on MTK, I wanted a Qualcomm Snapdragon, even if it will be a younger generation.

Let it be slow, let it be without a top-end camera and a super-powerful processor, but it will not let me down. Not overpaying for obviously unnecessary features like wireless charging or even fast charging. than that! I used to give my brother all sorts of pawerbanks and cables under the micro-USB, so here installed connector will even be a plus =)

Since 2 SIM cards and previously fitted memory card for 64 is available (on it a hundred years ago rolled up a few discographies of various Kino/Nautilus/BG and the like), wanted exactly 2 SIM card memory and not a combined slot. That eliminated the Xiaomi 6A.

As a result, for such criteria and a hundred dollars was chosen Xiaomi Redmi 7A 2/32 GB.

The funniest thing is that I recently bought a flagship from Xiaomi Xiaomi Mi 9 6/128GB and in some ways Xiaomi Redmi 7A it excels: mentioned above 2 SIM card memory; display not Amoled, but also not shimmit eyes will not be so tired when reading at low brightness; fm radio works without headphones (true, catches only a couple of stations); back cover is not glossy, as in the majority of smartphones Total. In general, this depressing trend of making all smartphones with powerful iron shovels and with a strikingly slippery back cover is depressing. I turned it in my hands and all caught himself thinking how much nicer it fits in your hand compared to the MI9! 3.5 audio jack is!!

Set in Xiaomi Redmi 7A rather Spartan charging 5 volt 2 amp cable micro-USB and paper clip. About the instructions there is not much point to recall.

Speaker at the bottom right, on the right side of the button and audio jack on top.

On top of the screen Xiaomi Redmi 7A light event indicator! Near the camera / speaker and proximity sensor. And the most interesting thing is the SIM tray for 2 SIM cards and a separate memory card!

Software Xiaomi Redmi 7A and system power

The first power on and immediately comes an update is excellent! Everything runs on the Miwi, and if before there was a Xiaomi in the use of any features are absent here. Same customizable curtain, same split screen, same settings menu. Fresh Android 9 Pie and very not even zero probability of support in the foreseeable future, because 7A is still a fresh model!

The last screenshot from CPU-Z surprised me at all so many sensors would be more appropriate to see in some smartphone of the above average price category, but not in the ultrabudget Xiaomi Redmi 7A

A multitouch for 10 touches only stands! In fact, in the budgetary is for 2-3-5 touch sensors, and then try to hit where it is necessary from the first time. You open a web page and try to scale everything properly to get to the right element. And the more touch recognizes, the more comfortable it is to work with.

The overall power all the same is not impressed and this is the fate of the middle segment somewhere in 2017. In 2019 smartphone Xiaomi Redmi 7A looks frankly weak. The situation is saved by the absence of the need to play top games or engage in any serious tasks. But I still tried it!

Games on Xiaomi Redmi 7A smartphone (PUBG and World of Tanks)

There were pleasant discoveries, there were unpleasant ones. Or rather, as the unpleasant expected. PUBG is run by default on low quality settings and I hoped that I would be able to play on rush mini-maps with fast respawns when graphics are not so important.

Say, so play PUBG Xiaomi Redmi 7A in principle is realistic, but it’s hard to win. All the more reason to enjoy the process. The battery consumption of a couple of percent for 5 minutes of play.

Redmi 7A and World of Tanks is another matter. Run the game on low (not ultra-low, where pixels are the size of half the screen!) and got very even playable (stable 60 fps!). Battery consumption is similar, details in the video.

Xiaomi Redmi 7A cameras and photo capabilities

Here, too, everything is ambiguous. In daylight the old module (I think it was in the previous year’s budget models) can give decent pictures. And if you do not plan to shoot photographic masterpieces on your smartphone camera, then fine. You can pick on the details and the color rendition, but is it worth it to do in the niche of budget smartphone?

I took selfies on the front camera at 5 megapixels and took them perfectly. And even if there is no blurred background, I was afraid it would be much worse.

Redmi 7A smartphone battery, charge and consumption and FITS

No surprises in terms of charging it charges at 1.5-1.7А. I started with 10%, ended up with a little less than 100% and the current gradually decreased.

Synthetic discharge showed a slightly increased figure usual smartphones at 3,000 mAh show in the test on the first screen somewhere around 5-6 hours, and here still 8.5 hours of continuous load to discharge from 100 to 20. It turns out at 3-4 hours of screen activity two days of battery life, and if you consider the circumstances of use will be 3-4 days. GPS does not lag, cold start in a minute and the number of satellites caught is quite at par.

Testing 4g showed better results than my wired internet in the house.

Still there is a possibility of a double 4g, podi for areas with unstable communication. FM radio without headphones in general I was amazed why the flagships from Xiaomi it can not, and some bum budget can? Where is the justice in this world?

Well and the most important feature 32 built-in 2 SIM card and with the ability to install applications on the memory card!

Below is a short video review of Xiaomi Redmi 7A, there will be an installation of two SIM cards and memory cards. There will also be a demonstration of the volume level, because there are increased indicators in this regard. There will also be a demonstration of no problems with flickering screen and really a lot of cool things in this smartphone. And I have not snagged all sorts of FACE ID, which I just do not need here and do not matter. Equally unclaimed would be a fingerprint scanner or dual or triple camera.

In general, I warmly recommend Xiaomi Redmi 7A as a budget friendly 2 SIM cards and memory card. What was the price and not expensive, and behaved decently, and did not have what is known to be a failure of design elements. The only bottleneck in the 2 GB RAM for tasks akin to seing or correspondence in messenger especially and do not consider as a minus, I think a few years will suffice them for not demanding tasks and just to draw a picture in the browser.

Xiaomi Redmi Note 7 User Manual:

Soon you will learn how to use Redmi Note 7, the first power on and set up the device.

How to turn on

You need to press the power key to turn the phone on.

If it is the first power-up, you will see the name of the graphical shell MIUI and its version. After will be the basic setup:

  • Select the Russian language;
  • connect to the Internet;
  • Accept the terms of the agreement;
  • insert the SIM card;
  • enable/disable Google services;
  • Smartphone unlock setting;
  • additional settings, turn on update automatically;
  • Choose the theme, this is the last step.

Now you know how to set it up correctly the first time you turn it on.

How to insert the SIM card

To do this, you’ll need a clasp wrench from the box. Find the hole in the left face, gently press with a paper clip and remove the combo tray for the SIM card. Next, insert the SIM carefully into the tray, and the tray back into the smartphone. Done. The video will show you how to do it visually:

How to charge properly

  • Use only original charger.
  • Try to put it on charge when the charge level is 15-20%.
  • Charge to 80% or more every time.

How to remove ads

To disable ads in the MIUI graphical shell you need to perform a series of actions in several applications. To answer this question requires a whole article, read here.

How to take a screenshot

Swipe down to invoke the notification panel and select the Snapshot (image with scissors). Screenshots are saved in the gallery by default.

How to enable NFC

Despite the rather high specifications smartphone does not support NFC.

How to set up the camera

An overview of all the camera settings and tricks on Xiaomi devices running MIUI 10: filters, HDR, flash, modes and manual settings (white balance, lighting, Focus, shutter speed and ISO).

Now you know how to use and configure Xiaomi Redmi Note 7. Have a pleasant and comfortable use to you!