Infinite Reboot Iphone 5s Nand
The iPhone does not turn on and asks to urgently connect it to itunes, what should I do?
The army of smartphone fans is increasing day by day, the more devices are used every day, the more problems arise with them. In today’s article, we will analyze the situation when an iPhone (of any model) asks to connect to itunes and does not turn on.
The problem is frequent and well-known to servicemen, not eliminating it takes about half an hour of work and 1500-2000 rubles of money. In order not to spend the family budget, we will try to turn on the iPhone on our own, at home.
There are many reasons, it is difficult to systematize them, but several popular ones can be distinguished:
- The firmware flies. it is because of this that the iPhone 5, 6, 7 models do not turn on, the aityuns and the lace are on. We will consider how to reflash the device in the next section.
- A hardware error, as a result of which some system files were deleted or corrupted, again, flashing will help. Masters call it “iPhone hangs on a cord.”
- An error may occur after falling on a hard surface.
- Water entering the device.
What to do if the iPhone seems to load, but does not turn on, displays a “cord” and asks to connect to itunes? Consider the options for solving the problem below.
To turn on a broken iPhone, follow the instructions clearly. If you don’t understand something, at the end of the article there will be a instruction on how to turn on an iPhone of any model through the official itunes software, if it does not turn on. The instructions apply to all models of Apple smartphones, 4, 5, 5S, 6, 6 plus, 7, 7 plus.
- Download the program called iTunes (link) from the official Apple website.
- Install iTunes and download the firmware itself for your iPhone model.
- Turn off the iPhone and connect to the computer using the standard cable from the kit (can be replaced with a good copy).
- For 5 seconds, hold down the “HOME” and “POWER” buttons together, wait about 10 seconds.
- After 10 seconds we release “POWER” (it is also a lock), but leave “HOME” pressed!
- After a while, Aityuns will display a message about the DFU mode, now we are starting to restore the firmware.
- In iTunes, we find the “Restore” button and holding “Shift”, press it.
- In the window that appears, select the previously downloaded file with the extension ipsw, confirm the selection.
- The firmware recovery process has begun, now we are waiting for completion.
It must be remembered that when flashing all data will be erased. If you do not have a backup copy or you stored all the photos on a dead device, without using iCloud, it will not be possible to restore them. In this case, you should immediately contact authorized service centers, they will help, but they will ask for good money for the work.
If errors occurred during the flashing process, for example, a warning appears with error No. 9, then the situation is much worse. Most likely, an important chip inside the phone is damaged, it is unlikely to be able to fix it on its own.
In this case, you will have to contact the repair masters, since without special equipment it is not realistic to solder the microcircuit.
Although our craftsmen have learned to do this, I’ll leave a about re-soldering the microcircuit with my own hands, suddenly someone will come in handy.
It happens that other types of problems arise when the iPhone does not turn on, the camomile spins on the screen and nothing happens. Most likely you will have to reflash the device, but first we’ll try to make a hard reset, it will suddenly help. Do not be alarmed, there is nothing complicated and terrible, you won’t even lose data, as if you still decide to reflash the iPhone.
Instructions on how to make a hard reboot, if the iPhone does not turn on, the iTunes icon and cable appear on the screen
- Hold the lock button and the home button
- We are waiting for the order of 5-10 seconds
- It is likely that glitches of the phone will disappear
- If it does not help, look at the previous section, and repeat everything according to the instructions.
After several attempts, the smartphone did not come to life? In this case, the best solution is to turn to experienced professionals, although this will not be free, you protect yourself from the risk of completely “bricking up” an expensive device. What to do when the iPhone 5 s does not turn on and in an ultimatum form requires connecting to it, you now know, carefully read and watch the, in 90% of cases this will solve the problem.
instruction. iPhone 7 hangs on iTunes lanyard after updating iOS 10, what should I do?
For many iPhone 7 users, a USB cable and iTunes icon will appear on the screen after upgrading to iOS 10 / iOS 11, usually in this case it is considered that your device has already entered recovery mode.
After a series of “Unknown Errors”, it came to a black screen with an image of a cord and an aytyuns badge; the service said that the problem was with the board.
Or your iPhone 7 had a problem with the black display where the cord and the icon in the form of the iTunes logo appeared, after a forced reboot, the phone generally does not respond to anything and does not turn on and does not charge. This article is written, what to do, iPhone 7 hung on the iTunes lanyard after updating iOS 10 / iOS 11?
Tenoshare Tenorshare ReiBoot, a free program will solve your problems, iPhone 7 is in recovery mode and after updating iOS 10 / iOS 11 hangs on the icon, connect to iTunes, Tenorshare ReiBoot will help you exit recovery mode, and your device will reboot after a few minutes.
First, download and install Tenorshare ReiBoot on your computer. Connect your iPhone / iPad / iPod touch to your computer using USB cables. Then Tenorshare ReiBoot recognizes your device in recovery mode, click the “Exit Recovery Mode” button. Wait a moment and the device will reboot safely. In this process, do not disconnect the device.
Solve Hang on iTunes logo in iTunes
The way to get rid of the black screen with the cable and iTunes is to recover in iTunes, But it will erase all the contents, so create a backup before using it.
- Download and install iTunes on your computer.
- Open iTunes, connect the device to the PC using the USB cable.
- Wait until the image of the iPhone with the cable connected appears on the screen.
- Click the “Restore” button in iTunes. the device will start working again, as usual.
The usual way is to force a reboot, but after a forced reboot, which is used to exit the normal recovery mode, iPhone 7 still continues to load a black screen on which we see the cord and iTunes again and again.
This situation means that the iPhone 7 fell into the so-called “recovery loop” mode (Recovery Loop). Getting into Recovery Loop can occur for various reasons, for example, as a result of errors after updating or restoring iOS 10 / iOS 11 firmware.
Then you need to fix the operating system.
- Click the “Solve All Freezes” button, and then you will get to the recovery page, click “Fix Now.”
- Now you will be the “Download firmware package” interface, click the “Download” button to download the firmware package online.
- After the firmware package has been successfully downloaded, click the “Start Restore” button to start system recovery.
In words, with the help of Tenoshare Tenorshare ReiBoot, it is safe and easy to solve all the freezes, in particular, the cord and the aytuns appear after updating the iOS 10 / iOS 11. If you have other questions, contact us, we will respond within 24 hours.
Cord and iTunes icon on the screen of iPhone and iPad. Recovery Mode or Recovery Loop?
Friends, occurrences USB cord and iTunes icon on the screen of iPhone phones, iPad tablets and iPods are quite common.
In general, it is generally accepted that if a cord and an icon in the form of the iTunes program logo appear on the black display of one of these devices, it means that the Recovery Mode is running.
But not everyone knows that cable and iTunes, in addition to Recovery Mode, can mean Recovery Loop, which is different from recovery mode.
In order for you to be able to make an accurate diagnosis, determine the mode in which your iPhone (or other device) is located, displaying a USB cable and Aityuns, we will write down the results of our research acquired as a result of using these mobile Apple devices. And maybe at least someone our meager knowledge will help solve their problem and restore the phone or tablet.
Recovery Mode. Normal
It is entered into the normal recovery mode of the iPhone or iPad using simple actions, the sequence of these actions is described here. “How to enter the iPhone in RM”.
To exit the normal Recovery Mode, we simply left the iPhone for a while, it rebooted itself and exited recovery mode. To immediately exit recovery mode (so as not to wait), we simply forcibly rebooted the iPhone.
It turns out that from the normal recovery mode, unlike others, it is quite easy to exit using a reboot.
Recovery Loop Mode. Obedient
There are cases that after a forced reboot, which is used to exit the normal recovery mode, the iPhone still continues to load a black screen, on which we see the cord and iTunes again and again. This situation means that the iPhone is in the so-called “recovery loop” mode (Recovery Loop).
A phone or tablet in this mode is often driven by iTunes. Getting into Recovery Loop can occur for various reasons, for example, as a result of errors when updating or restoring iOS firmware.
The recovery loop can occur as a result of a software, hardware or household failure (for example, accidentally unplugged the cable), once we put the iPhone into Recovery Loop mode when we tried to downgrade the iOS firmware from 7 to 6th.
Why did we add the word “Obedient” in the subtitle? Yes, because you can still get out of the obedient recovery loop and return the iPhone to working condition without losing information, for this we used the TinyUmbrella program, some users with TinyUmbrella had difficulties, and we found a more convenient way to exit Recovery Loop using the program RedSn0w. There are other programs to exit the loop. iReb and RecBoot.
Recovery loop mode. not obedient
If your iPhone or iPad falls into a naughty Recovery Loop, then, as a rule, not only a forced reboot is powerless, but also the redsn0w, iReb, TinyUmbrella and RecBoot programs cannot also take the iPhone out of the recovery loop.
As a result of using the programs mentioned above, the iPhone continues to display the USB cable and iTunes logo after a reboot.
In this case, we did not succeed in avoiding the loss of information stored on the iPhone, but it is good if you also made a backup copy earlier.
If you caught a naughty recovery loop, then you only need to connect your iPhone to iTuens and try to flash it. Sometimes it is not possible to flash the phone in this mode, then they enter it into DFU mode and try to flash it again.
As a result of the firmware, the iPhone erases all the information, and we restore it from the backup made earlier. It happens that after flashing the iPhone or iPad they ask to enter someone’s Apple ID and password, but this is a completely different story.
On the screen of the iPhone, the cord and the iTunes icon what to do
If a lace appears on your device’s screen on a black background and the iTunes icon is at the top of the screen, it means that one of the two modes is currently running on the iPhone — it is Recovery Loop or Recovery Mode.
Recovery mode. This is a special recovery mode on any iPhone, designed for emergencies when the smartphone cannot boot and finds software errors.
If, after checking, the phone restarts and again shows the cord and the iTunes icon, then the device has switched to Recovery loop, or, as it is called in another way, “Recovery loop”.
To understand what mode your phone is currently in, you just need to restart your smartphone. If after rebooting it works correctly, then this is the usual mode of file recovery (Recovery Mode).
But, if your device still after the reboot returns to its previous state, then the phone is in loop mode (Recovery Loop).
You cannot exit it with any buttons, you can use special programs or take it to a service center so that the wizards do it.
How to exit Recovery Loop mode
For this, specialized programs have been developed. These are TinyUmbrella, RecBoot and Redsn0w. All products can be downloaded for free on official sites. We consider in detail each of them.
TinyUmbrella. Connect your iPhone via USB, after installing the program. Run it. Put your device in DFU Mode.
As soon as the phone is switched to this mode, the Fix Recovery tab will become active in the program window. Click it and in the window that appears, confirm the action by clicking the “Yes” button.
Within a few minutes, your phone should automatically reboot and return to its previous working condition.
redsn0w. Download and install the application from your computer. Connect the iPhone via the USB cable and run the program. Click on the Extras tab.
In the window that appears, click on the Recovery Fix tab. Next, put your smartphone in DFU Mode. The program will automatically detect the DFU, and fix all errors.
Within a few minutes, the phone will be restored to its previous working condition.
RecBoot If you can’t restore your iPhone using the above programs, then use the small RecBoot utility. Download files from the official site and install on the computer.
Connect your phone via a USB cable and wait until the program detects the device. Next, click on the Exit Recovery tab. Wait for the device to reboot and return to its previous state.
If you do not know how to put your smartphone in DFU mode, carefully read the recommendations below. DFU mode on all generations of the iPhone is turned on the same way:
You need to connect the iPhone to the computer via a USB cable and hold the Power and Home buttons simultaneously for 10 seconds. Then release the Power button while continuing to clamp Home. Hold until the phone sees the computer in DFU mode.
If you are unable to restore the device using the described software tools, use iTunes. But keep in mind that in this case all data from the iPhone will be deleted. Connect the device in DFU mode to the computer, open iTunes, wait until the device is detected by the system.
Click the Restore tab and Confirm the action, then wait for the end of the procedure. Once the process is complete, your iPhone will reboot and work correctly. But it will not be possible to remove cracks from the screen, only replacing the screen on the iPhone 6 plus with the help of service center engineers will help.
They will also help you and restore the iPhone, exit various recovery modes.
Hello! iOS 10 is already available for download and installation, although at the time of writing, only as a version for developers.
However, absolutely any iPhone or iPad user can install the beta version of the new software and try all the new iOS 10 chips “for free and without SMS”. And this user will almost certainly encounter various problems before or after updating to iOS 10.
And this means that it’s time to write an article on how to deal with various errors that will bring us (unfortunately!) A new version of the operating system. Let’s go!
A few important points and links to articles that may come in handy:
Error “update update installation” iOS 10
It does not matter which firmware you are trying to install. beta or final, most often the inscription “update installation failed” indicates that there are currently problems with Apple servers.
What to do in this case? Check if everything is normal with them and just wait until the influx of people wishing to download new software subsides. As a rule, this does not last long (a day or two).
Also, most questions like “Why can’t I put iOS 10?” Are perfectly answered by this article.
Error 14 when updating to iOS 10 via iTunes. how to fix it?
Some users who update via iTunes are faced with “Error 14” and, as a result, the inability to install new software.
Here’s what you need to do to fix it:
- Back up your iPhone or iCloud.
- Restore official latest firmware (do not use backup copies!).
- Update on iOS 10.
- Now you can return data from the backup.
Apple itself, in addition to standard recommendations for resolving this error (check USB ports, wires, update iTunes) also recommends updating on a computer with Xcode installed.
Endless Verification Update
During an attempt to install iOS 10 via a Wi-Fi network, iPhone or iPad hangs on the message “Update Check” and that’s all Absolutely nothing happens!
What can be done:
- Check your internet connection.
- Again, pay attention to how Apple servers feel there (the link is a little higher).
- Reset network settings.
- Make a forced reboot.
Most often, the inability to check for software updates before installing on iPhone and iPad is due to Internet problems. So this is what you pay close attention to.
Account lockout and password reset does not work
The error is that after updating to iOS 10 beta, some users are faced with the fact that Apple ID was blocked on their device for security reasons.
The user is invited to go to the site to recover the password. However, there they are met by a “server error” and “your request cannot be processed in the near future”.
over, as it turns out, this is due to two-factor account authentication.
What to do to prevent this error and how to fix it?
- Disable two-factor account authentication before updating (do not forget to enable after!)
- If the error has already occurred. we restore using iTunes via DFU to stable software (not beta!). a link to how to do this is at the beginning of the article.
The article will be constantly updated and I sincerely hope for your help, dear friends.
After all, I’m unlikely to be able to independently track absolutely every problem, and I can easily miss something important. Therefore, be sure to write in the comments those errors that you encountered after updating to iOS 10.
And we, the whole community, will try to solve your problem if possible. we will show you what actions can be taken in this or that case!
P.S. Well, you need to put a “like”. let’s tell everyone that iOS is far from faultless! Powerful “1” to ensure that Apple does not “squint”! 🙂
Support.apple.com/iPhone/restore on iPhone screen. what to do
Recently, many users of apple products are faced with the appearance on the screen of a requirement to connect to iTunes, support.apple.com/iPhone/restore also pops up at the top.
This point is also called “Endless recovery mode”, since the device practically freezes. To date, this bug most often occurs on iPhones models 5, 5S, 6, 6S.
This conditional error can appear quite spontaneously, or in the process of restoring or updating a device with a jailbreak. Let’s understand in detail what kind of inscription this is and how to remove it.
Endless recovery mode in iPhone
How to remove from the screen?
So, to solve the failure, you just need to restart your device. The very inscription support.apple.com/iPhone/restore is the address of the official resource where you can get additional information about the problem and, accordingly, its solution.
By the way, this inscription began to be indicated after last year’s iOS updates.
Let’s point by point describe how to do it right:
- In general, to restart on iPhones (6S, 5S and earlier), iPad and iPod Touch, you need to simultaneously hold down the Lock and Home buttons.
We hold them for about 10 seconds, after the start of the Apple logo should appear on the screen.
If rebooting does not help
If a simple restart does not help you, and the smartphone still requires a connection to Aityuns, then the only way out is to reinstall your iOS (naturally, you should immediately upgrade the software version). But before you get down to business, check the following:
- The computer must have iTunes of the current version. To check this, in the top menu, click on “Help”, there click on “Check for Updates.” Then everything is simple. follow the prompts.
- We connect your device to the computer. Important (!). always use the original USB-cables, they are always included.
- After the connection, the message “There was a problem with the iPhone [its name], which needs to be updated or restored,” appeared.
- We select the “Update” option, since in this case your iOS will be reinstalled and personal data will be saved.
And here’s another visual instruction explaining how to enable your frozen iPhone through the ReiBoot program. To start a “dead” device, you need the Pro version, but there is a trial period.
These methods in most cases should solve the problem of endless recovery mode with the support page support.apple.com/iPhone/restore.
If you still do not succeed, it is better to write technical support. There, experts will surely help you in online mode, explain the situation in more detail and take into account all the nuances.
If you have questions about these methods. write in the comments.
On the iPhone screen iTunes cord
The appearance on the black screen of the iPhone of the iTunes cord and the icon of this service, as a rule, indicates a software or hardware failure.
Very often, the cord appears after the user made an attempt to update the operating system or roll it back, and at that time some kind of failure occurred.
A mistake when flashing the mobile phone yourself is one of the most probable reasons for the connection cord appearing on the iPhone screen. If the problem is software, then it is quite simple to solve on your own.
It is enough to download and install iTunes on your computer, connect the phone to the computer through the wire and in the iTunes program window that appears, click the “update” button if it is available (data is not erased during the update) or the “Restore” button (this procedure leads to the complete loss of all user data on the device).
The second common reason for a splash screen with a cord for connecting to iTunes is a hardware malfunction.
If you have completed all of the above and in the process of restoring iTunes software an error message is displayed, then in 95% of cases this indicates a hardware malfunction and you must contact the service center. Here is a short list of iTunes errors and what they might be related to:
Error 1 or error 50. indicates problems with the modem part of the phone.
Error 3194. usually occurs when you try to restore your phone with software of an old version that has already ceased to be signed in iTunes.
Error 9 is a very abstract error and can occur for a wide variety of reasons, ranging from the plume of the front camera to the faulty processor.
Error 40. most often indicates that the problem is related to NAND-memory.
Error 4005. just like error 9 can occur for many reasons.
Error 4013. has a wide range of causes. Suppose on iPhone 5s this problem occurs due to a malfunction of the Flash file system, and on iPhone 6s most often this error occurs due to problems with the modem processor.
Error 4014. most often indicates problems with RAM.
This is not a complete list of errors that may occur when restoring P.O. the list is very wide and by mistake it is impossible to say with one hundred percent accuracy what failed. Requires professional, hardware diagnostics. (ed. not fortunetelling # 128578; )
Also, from recovery mode, if it was not started by the system due to an unsuccessful update, you can try to exit by forcibly restarting the phone (press and hold the Home and Power buttons).
If the cord does not disappear even after a restart, then it is obvious that your iPhone has switched to Recovery Loop mode (recovery loops). In this case, the iTunes cord will appear on the screen even after a hundredth reboot. Such a problem, not being a specialist, is extremely difficult to solve.
It’s best not to waste time and risk your smartphone and go to the service center, where experienced specialists will help you for ten minutes.
Some “experts” advise using special programs, such as TinyUmbrella and RecBoot, to exit the “loop”.
We warn the owners of the iPhone that the use of any software to resolve this error can lead to a complete loss of data in the phone’s memory.
In the event that after restarting the operating system you again see the iTunes splash screen, the most appropriate solution would be to visit a specialized workshop.
What to do if iTunes does not see the iPad or iPhone
Hello everyone, dear readers. In today’s post, I will tell you what actions to take if the computer (Windows XP. 10; OS X) does not see your Apple iPhone or iPad device. If there are several reasons why such an unpleasant situation occurs. iTunes does not see the iPhone or iPad, I highlight four:
- The most common mistake. why the device remains “invisible” for iTunes software. is an outdated version of the program. Apple forbids the work of the new version of iOS with older versions of iTunes. As I said above, outdated software is the most common and obvious problem;
- The second problem is that you did not click on the device when you connected it to the computer via USB, the “Trust this computer” button. In this case, the iOS operating system simply blocks access to Windows XP. 10 or OS X;
- Mechanical damage. This can also be, for example, when you connect your iPhone or iPad to a personal computer (Windows XP. 10; OS X), using a damaged USB cable;
- Other reasons if iTunes does not see the iPhone or iPad. Of course, the three previous reasons can not cover all the problems associated with the visibility of the iPhone or iPad. There may be a hundred different reasons. In this section I will give you some tips on what to do in this situation.
So, below, in the relevant sections, I talk in detail about what actions need to be taken in certain cases in order for iTunes to begin to “see” your Apple mobile iPhone or iPad device.
This problem is solved very quickly and easily, follow these steps:
- Launch iTunes. The iPhone or iPad device at this time to the computer (Windows XP. 10; OS X) is not necessary to connect, you can do it later, after the update;
- In the top menu of the program, you need to select the “Help” item, and in this item find the update section and click it;
- After the above steps, the program will check for updates for your version of iTunes. If updates are found, you will be prompted to install them;
- Agree to install updates and update the program, then restart the computer (Windows XP. 10; OS X).
After all the above steps, reconnect your iPhone or iPad to a personal computer (Windows XP. 10; OS X), to iTunes and check if the problem is resolved. If not, then move on to the following methods.
No trust in the computer
Your iPhone or iPad may block iTunes access to gadget files and data, i.e. when connecting, you did not click the “Trust this computer” button. The problem is solved as follows:
- First of all, you need to make hidden files and folders visible; to do this, go to the Windows XP. 10 control panel and in the upper right corner select the item. large icons, then the section. folder settings;
- Next, the “View” tab and select to display hidden files and folders;
- Now delete the contents of the C: ProgramDataAppleLockdown folder (if you are using Windows 7-10) or the C: Documents and SettingsAll UsersApplication DataAppleLockdown folder (if you are using XP).
- Go to the command line and select “Go to folder”, then enter / var / db / lockdown;
- Delete all contents of the opened folder.
If none of the methods help, then make sure that the USB cable with which you connect your iPhone or iPad to your computer (Windows XP. 10; OS X) is not damaged.
Checking this is very simple: if the connection to the computer is an indicator in the upper right corner will be green and the image of lightning will be to the right of it.
If the indicator is gray and there is no lightning, then there is no connection.
Check the cable for operability by connecting it to the mains.
There may be another hundred reasons why this problem occurs and iTunes does not see the iPhone or iPad.
What to do if iTunes does not see the iPad or iPhone Link to the main publication
What to do before upgrading to iOS 11
iOS 11 will be available on September 19th. It will make your device even more convenient, functional and flexible to configure. And we will help prepare for its update.
Before installing iOS 11, check the list of compatible devices below to make sure your device supports it.