I forgot the password on my phone how to unlock my iPhone
Forgot the password on the phone how to unlock the iPhone
What to do if you forgot your iPhone password. A question that may baffle any Apple product owner. Solutions to the problem. In the material of RIA Novosti. RIA Novosti, 24.12.2020
MOSCOW, Dec. 24. RIA Novosti. What to do if you forgot your iPhone password. A question that can puzzle any Apple product owner. Solutions to the problem are in the RIA Novosti article.How to unlock iPhone via iTunesSpecial software for Apple product owners can help with a forgotten gadget password. No need to consult a specialist or go to the service center.If you forgot your iPhone password, it’s enough to:C help remote service iCloud is installed on your phone and wireless data transfer is enabled, you can restore the gadget with the help of your personal account, when you forgot your iPhone password. This requires:After the process will reset the settings and the question “how to recover the password on the iPhone” will disappear by itself.Reset the wrong attempts counterIf you have set up synchronization with your computer through iTunes, then you can unlock your iPhone by resetting the wrong attempts counter. This method is suitable if the password is not forgotten and till the next attempt to enter it, the screen shows hours and days instead of minutes.The sequence of actions is as follows:Note that if you have not previously synchronized your iPhone with a PC, you will not be able to reset the counter.The recovery mode to unlock iPhone, if you have forgotten the passwordClear your phone settings in Recovery Mode. This is another answer to the question, what to do if you forgot your iPhone password. In Recovery Mode gadget will perform rollback to restore point.This will require:Important: If error 3004 appears when installing the new firmware, close all browsers and make Internet Explorer your default browser.Note that the recovery mode is launched differently for iPhone 8. Smartphone should be turned off and connected to the PC, then quickly press and release the volume up button and then do the same operation with the volume down button. At the end you need to press the “Power” button and Recovery Mode will start.To install new firmware through DFU mode on iPhone if you have forgotten the password, you can also launch the iPhone through DFU mode. But in this case it will revert to the factory default state and you will have to restore your data from scratch.You will need:Example of how to put iPhone X in recovery mode DFUThe iPhone of model 10 with a forgotten password can be restored as follows:After that you can perform the same steps as in Recovery Mode: install new firmware.What to do if nothing helps?If you do not have access to a computer with authorized iTunes, you can use third-party applications to restore a locked iPhone, such as iMyFone LockWiper or 4uKey. The first one performs a recovery via DFU mode, replacing iTunes, and the second one allows you to reset your iPhone to factory settings and install the firmware without iTunes.If all else fails, you’ll need to turn to a professional. The service center knows what to do if you forgot your iPhone password. During the visit, you must have the documents confirming the ownership of the iPhone. Only in this case, the experts can tell you how to unlock the iPhone if you forgot the password.Why the iPhone can be lockedBlocking the iPhone is possible if:
The main ways
Iphone lock can be removed in different ways. Some of them are unofficial, but for such manipulations can remove the device from the warranty. So we will start with the official methods, which are not always on the surface.
How to unlock iphone when forgot password
Right away we want to warn you against online scammers. Now there have ravened a huge number of “miracle sites” promising to sell for 100-200 a miracle program to unlock the phone. Don’t be fooled by this, even an Apple employee won’t help you. The corporate structure is built in a way that nothing is tied to one person. If you will restore access through the official technical support (about this below), you will understand it.
Using third-party software
Tenorshare 4uKey is a great tool to unlock iPhone, will help unlock iOS. Full list of functions can be found on official site of developer. There you will also find the installation distribution of the software. Software is available in Russian. To bypass iPhone or Apple ID activation blocking we recommend 4Mekey.
After downloading and installing the software, follow the instructions:
- Run the program and connect your iPhone /iPad to the computer via a USB cable.
- After the PC recognizes the smartphone, click “Start” to remove the iPhone access code.
- Before unlocking the password on your iPhone, download the latest iOS firmware online.
- When the software loads on your computer, click “Start Deleting” to start restoring iOS without the access code.
- The entire process takes a few minutes. Please keep your device wired to your computer or laptop until the system is fully recovered.
The iOS system is set up to lock and deactivate your device on its own. Lockout is activated after 10 unsuccessful attempts to enter the password or fingerprint. All personal data is deleted from internal memory. This is done to prevent fraudsters from accessing the user’s personal information: photos, videos, documents, payment data, etc.Д.
To restore access (including password code) and iTunes data:
- Connect your mobile to PC with the included lightning cable and enter iTunes.
- To force restart of X, XS and XR, iPhone 8 and 8 Plus. Quickly press volume up key, then immediately press volume down. Immediately after that, press the side button until the recovery mode appears on the gadget’s display.
Iphone 7 and 7 Plus smartphones: press the side button and volume up button at the same time.
The phones of the younger versions of the iPhone 6s: Home button pressed and the top or side button pressed.
- In the menu that appears, select the “restore phone” item.
- If the user has previously made backup copies, the system will offer to restore from them. Confirm action.
After the manipulation you can reconfigure the smartphone and use it fully.
The next option is the recovery mode. However, it only works if the user knows the Apple ID for the device and has access to iCloud, to which the device is tethered. Be careful! If you enter inaccurate information while “Find Phone” is active, the iPhone will simply “brick”. The method is suitable for versions from 6 to XR:
- Turn the device off and connect it to a PC.
- Select “Recovery Mode” in the new menu.
- Launch iTunes and press “OK” button, then press “Restore iPhone. If the notification about checking for updates appears, press “Check” button.
- On the next screen tap “Repair and update”.
The program will warn you that all data will be deleted from your smartphone. Now you need to select the iOS version to install, then confirm the user agreement and wait for the firmware to be downloaded. Do not unplug your gadget until the update and restore are complete. Some versions of iOS weigh over 3GB. Downloading new firmware may take up to 30 minutes if you have a slow internet connection.
Installing new firmware via DFU mode
Special low-level DFU (Device Firmware Update) mode is used for debugging the phone without loading iOS graphical shell. It is used when other soft reset procedures have failed. First you need to enter DFU mode. The input algorithm will be slightly different for different iPhone models:
For 6 and 6S version: press 2 “Home” and “Power” buttons for 10 seconds.
After starting DFU mode, your mobile’s screen will be black, without the apple icon. On iTunes you will see a message about checking for updates. After that the system will prompt the user to update the firmware. Usually it goes automatically.
- Connect your phone using a USB cable.
- Press Volume Down and Side Key at the same time. Press and hold them for 10 seconds until the screen goes dark. Then release the side key.
Next, you need to install fresh firmware by analogy of work through “Recovery Mode”. It’s worth downloading a verified IPSW file from the Internet beforehand. Otherwise the smartphone will offer to find the update itself. This can lead to long waits and repeated crashes, suspension of the interface and the system.
Reset the wrong attempts counter
If you are sure you remember the password, but have exceeded the number of incorrect attempts to enter, you can try to reset the counter.
(2021) Forgot Your iPhone Passcode? Here’s How You Can Regain Access!
Important note: Before the recovery procedure, the smartphone must be synced with iTunes at least once.
There are two ways to reset the counter: simple and complex. In the first case, the user simply leaves the cell phone to “rest” for 15-20 minutes. After that, enter the code again. But it also happens that all attempts have been used to.
Unlock iPhone X with recovery mode
If you’ve never performed a sync with iTunes and iCloud “Find My iPhone” is enabled, put your iPhone X into recovery mode and restore it to iTunes. Another great way to unlock iPhone X without a password or Face ID. Here’s how to do it:
Start iTunes and connect your iPhone X to your PC with a USB cable.
Quickly press the volume up button, then quickly press the volume down button. Then press and hold the side button until the recovery mode screen appears.
You should see a message in iTunes asking you to restore or update your device. Click “Repair” and iTunes will try to repair the device and install the latest firmware version.
After that your iPhone X unlocks and you can configure your device.
We all know that technology develops at a fast pace and gives us a world of possibilities in all areas of life. Among all the good things that technology offers us, mobile devices (like the iPhone) occupy a significant place.
You might find yourself in a situation where your iPhone is locked because your child has entered the wrong password or PIN a few times. It happens that a person himself forgets his own password from his device and cannot remember it. Or your smartphone screen is broken and there’s no way to enter your password, even if you know it. There are several ways to unlock your iPhone, but it’s important to choose the best one. So you don’t damage your device and lose important data. How to Find the Right Solution? It’s good that you are interested in this, because we have the answer for you.
In this article, we will tell you how to unlock iPhone without password in different ways.
Unlock iPhone without password / iTunes / iCloud. 4ukey (recommended way) unlock iPhone without password using iTunes (only for synced device) use iCloud to unlock iPhone (Find iPhone function must be enabled) ⦁ bypass lock activation via 4MeKey
Unlock iPhone without password / iTunes / iCloud. 4ukey (recommended way)
Tenorshare 4uKey is a great option if you want to unlock your iPhone without entering a password. With this powerful solution you can effortlessly bypass the need to enter a password. Your screen is broken, you forgot your password, or the system is locked because you tried to enter the wrong password. 4ukey will effectively help in such situations. This software is able to remove the protection of six or four digit passcode, Touch ID or Face ID from your iPhone. It supports the latest version of iOS and will instantly unlock your login password. With this tool, you can also reset your iPhone to factory settings without using a password.
Download Tenorshare 4uKey on your computer from the official website and run it after installation. Connect your iPhone to your computer with a Lightning cable and let 4uKey detect your iPhone. Click “Start unlock” in 4uKey.
Now you need to press “Download”. Download the latest iOS firmware for your iPhone.
To unlock your iPhone, click “Start Unlocking”. Wait for the process to complete.
Now that you’re all set, you can reset your iPhone password as you would for a new. You need to reconfigure Face ID, Touch ID and password settings. You can restore your iPhone with an iCloud or iTunes backup.
You can then close the program, disconnect your iPhone from your computer, and set it up as a new.
If you have forgotten your Apple ID, you can also use 4uKey to unlink your iPhone to your Apple ID.
How to unlock iPhone without a password using iTunes (only for a synced device)
Another way to unlock your iPhone without a password is to use iTunes. However, this method can only work if your device is already synced with iTunes. In addition, this method will delete all your data from the device along with the password. Therefore, it is recommended to back up the data from your device to iCloud or iTunes beforehand.
How to unlock iPhone without password using iTunes:
Connect your iPhone to the pre-trusted computer on which you previously synced your device. 2. Start iTunes and wait for it to recognize your iPhone. Click the device icon, and then click the “Summary” tab. 3. Click the “Restore iPhone” button in iTunes.
Using iCloud to unlock iPhone (“Find iPhone” must be enabled)
In addition to iTunes, there is another way to reset the iPhone password. Note that if you want to use iCloud, you must turn on “Find iPhone”. This way, you can easily unlock iPhone without a password.
Go to the iCloud website.Com and log in to your account. After that, select the “Find iPhone” option.
Click on “All Devices” and select your iPhone in the device list.
Click “Erase iPhone” and confirm the action by clicking the “Erase” button. All of your iPhone data along with your password will be erased and your iPhone will reboot without the need to enter your password or PIN code.
Bypassing the activation block via 4MeKey
Lock iPhone activation is a feature that allows you to use your factory restored iPhone only after entering your original Apple ID and password. The professional Tenorshare 4MeKey utility can help you bypass this blocking.
⦁ Download, install and run 4MeKey on your PC or Mac. Attach your locked iPhone to it and confirm that you trust the device. Select “Remove iCloud activation lock”.
Restore without saving information. Reflashing
The whole process is complicated, but if you follow the instructions carefully, unlocking iPhone 7, 7 plus will not take much effort. Choose the site you want to download from very carefully, as it is much easier to put a virus on your phone and break it than to flash it.
- Download the firmware that matches your resolution gadget to your PC.IPSW.
- Open the explorer and the downloaded document with resolution.IPSW, then move it to the iPhone Software Updates folder.
- Turn on iTunes, press ctrl “Restore iPhone”. Click on the downloaded file in the window that pops up and wait for the firmware to finish. Unlocking iPhone 7 will happen along with clearing all the data from the device.
How to unlock iPhone 8 and 8 Plus via iTunes
The safest way to keep the integrity of data on your smartphone. Unlocking iPhone is possible if you have previously synced the gadget with iTunes. It is important to use the computer or laptop with the program installed, to which the smartphone has already been connected. The method is ineffective if the person accidentally found the iPhone 8. How to unlock your device will explain a detailed algorithm for resetting the password on your iPhone 8 or 8 Plus. Connect your phone to your PC, start iTunes and follow the instructions.
- Log in to the program.
- Wait for devices to sync. Then activate the backup function.
- When you’re done, select “Restore Device”.
- The iPhone 8 or 8 Plus setup screen will appear. Choose “Restore from iTunes Backup.
- Choose a backup of the right size and date. Once the settings and data are restored, set a new screen lock password.
Reset iPhone via iCloud
This is a pretty radical method. It will erase all of your iPhone data, including passwords. You will need to reconfigure your device. If you decide to use the method, be sure to back up your data as described here.
- Open iCloud on your computer.
- Enter your Apple ID and password and, if necessary, confirm that you trust this browser.
- Choose “Find iPhone.
- Find your device on the map and open the information about it by clicking on [i].
- Press “Erase iPhone”.
- Next, confirm the action and follow the prompts on the screen.
How to unlock iPhone with the special program (only after jailbreak)
If your favorite phone has been hacked by you or a previous owner, all the methods above do not work for you. You will install the official firmware. You will need to download a separate program for this called Semi-Restore. It will not work if you do not have the OpenSSH file and Cydia store on your phone.
Download the program at https://semi-restore.Com/ and install it on your computer. 2. Connect your device to your computer with a USB cable. After a while the program will recognize it.
Open the program window and press “SemiRestore” button. You will see the process of clearing your devices data and password as a green bar. Wait, the mobile may reboot.
When the tea crawl comes to an end you will be able to use your phone again.
Unlocking it after jailbreaking
Official methods are not suitable for jailbroken iPhone users. Installation of official firmware will lead to the loss of your smartphone functionality, so you will need to use third-party tools for unlocking. Let’s see the process using SemiRestore utility as an example, which you need to download and install on your PC.
- Connect your iPhone to PC with the cable.
- Open the SemiRestore app and wait for the smartphone to be recognized.
- Once the devices are paired, tap the “SemiRestore” link on the side of the screen.
- Wait for the cleaning process to complete.
While the device is recovering, the iPhone screen will turn off and on. This is a normal process. But you will have to do the setup again, though the jailbreak will not disappear from the smartphone.