How to Update Xiaomi Redmi Note 4

If your Xiaomi Redmi Note 3 Pro already has the international official firmware from Xiaomi, and you want to update it, then the easiest solution will be to use the application preinstalled on your smartphone. To do this, download the file with the firmware for the Recovery in zip format to the smartphone’s memory and save it in a folder called “Downloaded_rom”. On the device’s desktop, find the shortcut that launches the updater. “Updater”. and click on it. If there is no such shortcut, then find the item in the phone settings “Update”. In the window that opened, click on the button with three dots at the top right, and then select the file with the firmware. To do this, find the file that you previously saved in the smartphone’s memory and open it. The gadget will scan it, and then the device will flashing, after which it will be rebooted. This may take some time, so you have to wait.

The advantage of this utility is that you can always enable the update check in automatic mode, as a result of which your Xiaomi Redmi Note 3 Pro will always have the latest firmware of the latest MIUI.

But this method is strictly forbidden to use this method when you want to change the type of firmware (for example, from stable to developer), or do an update from the Asian version of the firmware. Then you need to use other methods, which we will discuss later.

How to Update Xiaomi Redmi Note 4

Update in recovery mode

There is one important point here, having learned about which you most likely will have a question “Why my Xiaomi Redmi Note 3 Pro is not updated”: It is not possible to implement this method on some Xiaomi with MTK processors and on gadgets with an unlocked bootloader. This is due to the fact that there are some differences in the recovery interface. It often happens that when updating the software you need to make a full reset to the factory settings, and therefore be very careful when giving your consent to this or that action. Download the firmware for your phone. So, rename the firmware archive to “Update” and save it to the smartphone’s memory. be sure to the root. Then reboot the phone in recovery mode in one of the ways:

  • Click on the desktop “Updater” (Update), then on the top right to the button with dots and select “Reboot to Recovery”;
  • Turn off the phone. Press and hold the volume up key with the power button for about 5 seconds at the same time until the recovery mode starts.

In this mode, you can control the volume up and down buttons, and the choice of action is confirmed by pressing the power button. With this, you need to select English from the list of languages, and then click “Install to SystemOne” in order for the Xiaomi Redmi Note 3 smartphone to start the update. After the process completes, reload the gadget by selecting “Reboot to SystemOne”.

MIUI update in Fastboot

To implement this method, you need an unlocked bootloader. How to do this, we described in other articles, so now we will not focus on this moment.

So, suppose the bootloader is already unlocked. Turn off the smartphone and start it in Fastboot mode by holding down the power key and volume down button.

Disabling driver digital signature verification. For windows 8

  1. Push button combination WinI. Come out to the right “Parameters”.
  2. Clamp Shift and click “Shutdown”.Reboot.
  3. After rebooting, a window will appear. “Choice of action”. Choose “Diagnostics”.“Extra options”.“Download Options”.Reboot.

After the reboot, we will see the “Reboot Options » press “F7” and wait when the Windows reboots.

For windows 7

When you turn on the computer, after the BIOS boot phase, we often click “F8”. A menu will appear. “Additional download options”. Choose “Disabling Mandatory Driver Signing”.

P.S: F8 does not always work the first time, so if it doesn’t work out, you can either repeat it 2-3 times, or resort to an alternative method.

Download and install the driver.

Create a folder on your computer, naming it as you like (most importantly, the name should be written in Latin letters), and unzip the firmware for fastboot into it. Then run the MiFlash program (27 Mb), click “Browse” and find on the computer the folder where the firmware was unzipped. In addition, just below the line, check the box for the desired update mode item.

Connect your smartphone to a PC or laptop via a USB cable, and then click on “Refresh” in a programme. In the event that the drivers are correctly installed, the connected COM port will be displayed there.

To start the process, press the key Flash and expect from 5 to 10 minutes. all the necessary components are updated. When this process is successfully completed, you will see a green bar in the progress bar, and then the gadget will reboot itself, and if there are problems, the program will also let you know about it with the corresponding message.

We hope this article helped you find the answer to the question “how to update Xiaomi Redmi note 3 pro firmware.” If the smartphone does not update, or you just have any questions or suggestions. write in the comments, we will answer you!