How to untie Airpods from iPhone

disable automatic ear detection

This is another feature you should try disabling to check if your Airpods perform better without it.

  • Open Bluetooth Settings on your iOS device.
  • Press i next to Airpods, then turn off Auto Ear Detection.

This feature should automatically forward audio to your Airpods as soon as it detects they’re in your ears, but it’s worth checking to see if anything is playing.

Unplug your watch

This issue can be related to pairing with both Apple Watch and Airpods, so you can try disconnecting your watch and see if the problem persists.

If you have other Bluetooth gadgets, turn them off too, in case something causes a conflict.

turn off WI-FI on your iPhone

We don’t know why this would matter, but some users found that after turning off Wi-Fi on the iPhone, the sound related error stopped. This could be due to sources of Wi-Fi interference, which we will look at in the next step.

Use only one AirPod

There are reports that indicate that the problem occurs less frequently if you only use one earbud, so you can leave it in the case to charge.

Alternatively, you can configure your AirPod to only use one AirPod microphone.

  • Open the Airpods case, go to Settings “Bluetooth” on your iOS device and select “Airpods”.
  • Tap i and select “Microphone” from the list of options.
  • The default option here is Automatic, with both Airpods providing a microphone. But you can change this to Always Left or Always Right.

How to fix Airpods that disconnect from iPhone

To prevent loss of AirPod Bluetooth connection, review the list of possible causes and fix them one by one.

Are they out of power? Did you accidentally turn off Bluetooth or select the wrong audio output? Is it a physical problem with one earbud, does ear detection work, or does the Airpods just need to be cleaned? Finally, we can check for sources of interference.

Why do my Airpods keep disconnecting?

You may not want to hear this, but there are many reasons why Airpods disconnect from iPhones and other Bluetooth devices. It could be a hardware issue, a signal quality issue, or an issue with a specific version of iOS.

AirPod disconnects were tiresomely common in 2016 and 2017 with iOS 10.1, and then re-emerged in 2018 after the iOS 11.2.6 update. This issue has occurred for the third time since the iOS 12.1 update and is likely to recur in the future. Report issues to Apple and look for fixes in future updates.

How to Disconnect/Forget, Reset, and Reconnect Airpods Pro (iOS 13)

Disconnection issues are usually related to phone calls: the caller complains that they can’t hear you well or can’t hear you at all, or you find that your Airpods are disconnected when you were in the middle of a call. Less commonly, you may encounter an issue when playing music or connecting to car bluetooth.

The problem could be with sensors inside the Airpods that detect if they’re in your ears, or with microphones. or it could be due to Bluetooth interference. Whatever the reason, we hope one of our fixes below can help you fix the AirPod disconnect issue.

Clean your Airpods

Since it is possible that your problem is due to dirt, you can clean them.

This is a delicate procedure because you do not want to scratch or mark the case or damage components. We have detailed advice on how to clean Airpods in a separate article.

2 min

Are your Airpods disconnected from your iPhone during phone calls or while streaming music? You are not alone. Airpods have suffered from connectivity issues since their launch in 2016.

User comments on Apple’s support forums suggest that AirPod connection issues are fairly common. But these issues can be fixed, and in this article, we’ll show you how to sort the set of Airpods that keep disconnecting from the iPhone.

Remove Apple Watch or Airpods

To uninstall Apple Watch or Airpods, make sure they are offline and then remove them from Find My iPhone on iCloud.com.

Note: You can also uninstall Apple Watch by following the instructions in Remove iOS device, Apple Watch, or Mac you no longer have. Later, you can restore Apple Watch from iCloud or iTunes backup.

Tap all devices, select an offline device, and then tap Remove from account.

untie, Airpods, iphone

If you don’t see remove from account, click all devices again click the Remove button next to the device.

If your Apple Watch or Airpods come online again, they will reappear in Find My iPhone. If a device appears, disable it in Bluetooth settings on all devices.

Removing an iOS or Mac device

On an iOS device: Go to [your name] iCloud Settings, then turn off Find My [device]. Enter your Apple ID password, then tap turn off.

On your Mac, choose the Apple System Preferences menu, click the iCloud icon, and then uncheck Find My Mac. Enter your Apple ID password, then click Continue.

Note: You can also remove a device by disabling iCloud completely on that device. Disable iCloud Disable all iCloud features on the device.

How to unlink Airpods from Apple ID

If you no longer use an iOS device, Apple Watch, Airpods, or Mac, you can remove Find iPhone from Find iPhone on iCloud.com or your device. When you delete a device, it is removed from the Find iPhone list of devices, and if your device is running iOS 7 or later, lock activation is also disabled.

Before giving away or selling your iOS devices, be sure to Erase Content and Settings (under Settings General Reset Erase Content and Settings). Erasing content turns off Find My iPhone and Activation Lock. See the article on the Apple Support site for what to do before you sell, give away, or change your iPhone, iPad, or iPod touch. For more information on what to do before selling or transferring Apple Watch, see, sell, give away, or protect your lost Apple Watch Apple Watch User Guide.

Note: Apple Watch Airpods and remain in Find iPhone until you delete all devices that are paired with them.

Removing an iOS, Apple Watch, or Mac device you no longer have

If you don’t have an iOS, Apple Watch, or Mac device because you donated or sold it, you need to remotely wipe it before you can uninstall it. With Apple Watch, you must have watchOS 3 or later to uninstall Apple Watch.

Click “all devices”, select the device you want to erase.

iOS devices or Apple Watch: Enter your Apple ID password or your relative Apple ID password. If you are not using a trusted browser, answer your security questions or enter a verification code that is sent to other devices. If you are using your own computer and want to skip the verification step in the future, click the Trust button. If you are using a different computer, click I do not trust.

Mac: Enter your Apple ID password or your relative’s Apple ID password. If you are not using a trusted browser, answer your security questions or enter a verification code that is sent to other devices. If you are using your own computer and want to skip the verification step in the future, click the Trust button. If you are using a different device, click Don’t trust.

Since the device is not lost, do not enter a phone number or message.

If the device is offline, remote erasing will not start until the next time it is connected to the network. You will receive an email when the device is removed.

Apple Pay is disabled for your device. What credit or debit cards for Apple Pay, Student ID Cards, and Express Transit Cards will be removed from your device. Credit, debit and student cards will be removed even if the device is offline. Express transit cards will be removed the next time the device goes online. See the Apple Support article to use a wallet on your iPhone or iPod touch.

When the device is erased click Remove from account.

All your content is erased and someone else can activate the device.

How to rename Airpods copy?

  • Open the Airpods case and go to Settings → Bluetooth on your iOS device;
  • Click on the “i” icon next to the headphones in the list of devices and select “Name”;

How to reset Redmi AirDots headphones?

First, turn off your headphones. Press and hold the touchpads / buttons on each earbud and release when the red indicators light up. The next step is to keep your fingers on the headphones again for about 30-50 seconds. During this time, indicators will behave differently.

How to untie Airpods from Icloud?

How to disconnect icloud from Airpods if you no longer have access to your phone?

  • Press the button on the headphone case for 5-10 seconds
  • Wait until the indicator stops blinking
  • All bindings will be erased, it was a factory reset

How to change the name of Airpods is not original?

Instructions on how to change the name of Apple Airpods wireless headphones. Go to Settings. Bluetooth. (open the lid of the charging case and wait for the message “Connected” to appear on your iphone opposite Airpods). click on the i in the circle. change the old name to the new one. click Done. Done.

How to reconnect Redmi AirDots?

  • Press the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made.

How to reflash Airpods?

Connect the case to a charger or USB port on your computer. The iPhone should be close to the case. 4. Wait about 15 minutes for the iPhone to download the firmware update, verify it and send it to Airpods.

What to do if you find Airpods?

How to disconnect Airpods from someone else’s phone?

Go to the Bluetooth Settings menu and click the i icon next to your Airpods. Then tap “Forget this device” and tap again to confirm.

How to untie Airpods from someone else’s iCloud?

How to reset Airpods?

  • Before starting the procedure, you must place the Airpods in the case.
  • Press and hold the setup button on the back of the case until the status light blinks amber several times and then turns white. It will take about 10-15 seconds.

Can you track Airpods?

Starting with iOS 10.3, Find My iPhone lets you find missing Airpods. If Find My iPhone is already set up on an iPhone, iPad, or iPod touch that is paired with Airpods, the service is automatically enabled for the headphones.

How to connect Airpods to a tablet?

  • Open the Bluetooth settings screen on your device with which you intend to use Airpods.
  • Open the cover of the Airpods charging case, while the headphones themselves should be in the charging case.
  • There is a small button on the back of the charging case, press and hold it for a few seconds.

How to connect Airpods to TV?

  • Turn on the set-top box together with the TV.
  • The next step is to go to the Apple TV settings menu, find the Remotes and Devices tab.
  • Enter the Bluetooth menu, wait for your Airpods to appear in the device list, and connect to them.

How to reset Bluetooth headset settings?

Resetting Studio or Studio Wireless

  • Press and hold the power button for 10 seconds.
  • Release the power button.
  • All of the battery level LEDs will blink white, then one of them will blink red. This will be repeated three times. When the flashing stops, the headphone reset is complete.

Make sure you are using the correct iOS version

If this pair of Airpods has never been connected to your iPhone or iPad before, you should make sure the device meets the minimum system requirements. To communicate with first-generation Airpods, iPhone or iPad must be running iOS 10 or later. And to communicate with the second generation headset, you will need at least iOS version 12.2. To check which version of iOS is installed on your iPhone or iPad:

Go to the “General” section and select “About this device”.

In the “Software update” section, you can check the available update and, if necessary, install it.

Unlink Airpods, or how to factory reset your headphones

If the first or second generation Airpods won’t charge, can’t connect to the device, or have some other issue, you might need to reset your headset. The same steps apply to both the wireless charging case and the standard case with a Lightning connector.

If none of the above tips helped, try resetting your Airpods and reconnecting them to your iPhone or iPad.

Disconnect Airpods from iPhone or iPad. To do this, launch the “Settings” application on your mobile device and select the Bluetooth section. To the right of the Airpods line, click the “i” button, and then. “Forget this device”.

Place the Airpods in the case, close the lid, and wait at least half a minute. The lid can now be opened.

Press and hold the setup key on the back of the case until the status light blinks amber several times and then turns solid white.

Reconnect your Airpods using the standard procedure for connecting them wirelessly to different devices.

How to reset (untie) Airpods if they won’t connect to iPhone, iPad, or Mac

It can be very upset when simple and familiar things that are required to “just work” don’t do it. Your Apple Airpods should connect quickly and seamlessly to your phone, iPad, and other devices. An unusual situation for users is when things turn out differently. Airpods do not connect to iPhone, iPad or Mac.

If you have already done all the usual steps to connect a wireless headset to your iOS device or Mac, but it did not help, then here is what you can do to restore the functionality of such a bundle.

Airpods won’t connect to iPhone, iPad, or Mac

There are a few simple steps you can take to help your Airpods work most of the time.

  • Make sure your Airpods are charged. To do this, place the headphones in the case and connect it to a power source via USB for 1-2 hours.
  • On the iPhone or iPad you want to connect to, check if Bluetooth is turned on. To do this, open Control Center by swiping down from the top-right corner of the screen, or from bottom to top on older iPhones. There is a Bluetooth icon, which should be blue in case of activity. You can also check this using the Bluetooth menu of the “Settings” application.
  • Restart the iPhone or iPad you are trying to connect to. Most often, problems like this are solved by restarting the device.

If your Airpods don’t want to connect to Mac (MacBook, iMac, etc.)

If you’re having an issue connecting Airpods to Mac, then the troubleshooting steps are basically the same as for iPhone with iPad. First, make sure that the correct version of the operating system is installed on your computer.

Airpods of the first version require macOS 10.12 Sierra or newer to communicate, while the second generation requires macOS 10.14.4 Mojave or newer. To check the version of the software installed on your PC, choose About This Mac from the Apple menu (logo  in the left menu bar).

In order to check available updates, open the “System Preferences” application and select the “Software Update” section and, if updates are available, install them by clicking the “Update Now” button.

If the version of the operating system meets the requirements, then follow the same steps as in the case of the iPhone or iPad (instructions above). If this does not help, then reset the Airpods settings. For this:

On your Mac, turn off Airpods. To do this, hold down the ⌥Option (Alt) key while clicking on the Bluetooth icon in the menu bar.

In the device section, select Airpods and click Uninstall. Confirm this action.

Place the Airpods in the case, close the lid, and wait at least half a minute. The lid can now be opened.

Press and hold the setup key on the back of the case until the status light blinks amber several times and then turns solid white.

Now try reconnecting your Airpods using the standard procedure for connecting them wirelessly to different devices.

What to do if I find an Airpods case but not the headphones?

You can use the found case with any Airpods, your own or not. but!

Your Airpods case can be identified by its serial number. If you have a check or box, the previous owner will (in theory) be able to file a claim with you. And in the case of an accepted statement of theft, they also expose you as a thief, adding the headphones themselves (they say, they were in a case, but now they are not).

If I were you, I would leave the cover where it lay.

And so the second case is suitable as a local charger for Airpods. For example, alone at home, alone at work, and you no longer need to carry with you.

What to do if I find both the headphones and the Airpods case?

First, try connecting them. but not completely. Take out your iPhone, hold down the button on the case and wait for the animation on the smart screen. The full name of the accessory will appear after it.

Typically, the headphones are called Airpods (Apple ID account name).

Ask people around them if they have lost their headphones. Just do not give it right away, ask the person’s name and what brand and model the headphones were. If everything matches, you just did a very good job. and a huge respect from everyone.!

Secondly, wait at this place for 10-15 minutes. Perhaps the owner will come back and start looking for headphones through Find iPhone. If the headphones suddenly squeak in your hands, then that’s it, just wait for someone to approach you. Again, great respect for this.

If both options did not lead to anything, go ahead and carry out the letter of the law with a song. And wait 6 months.

? I found Airpods. They are mine now?

You are walking down the street. There is one Airpods on the ground. someone has lost it. The owner is not around and you have picked up a find.

Suppose the real owner is not announced. How to make found Airpods your own so that no one gets to the bottom?

It turns out that it is very easy to do, but according to the law, on the contrary.

How do you know who owns Airpods??

Headphones are not tied to people like smartphones. Identifying them is not easy. There is a visible serial number. Or scratches, damage that the past owner knows by heart.

Where to find the serial number of Airpods: in the charging case only. Open the cover and look up at the inside of the notch for the right earphone.

Separate earbuds. left and right. have no visible serial numbers.

What to do if I find Airpods but not a case?

Try searching online flea markets or contacting an Apple Authorized Service Provider for a paid replacement. details here.

Insert the found headphones inside the case, then pinch the white button on the back. Take out your iPhone, confirm the connection, and that’s it. Now these are your headphones.

One “but”. In the Bluetooth menu, these headphones will be called as they were called by the previous owner. To rename them, just click on the button opposite and set any other name.

What about the law? What am I, now a thief?

It may very well be. By simply picking up Airpods off the floor and using them, you are legally in a vulnerable position.

How To Reset your Apple Airpods. Hard Reset

According to the law of the Russian Federation, the person who finds someone else’s thing is obliged, in order:

Notify or attempt to notify the owner, or his representatives and related persons

In public places (transport, institutions, transport). notify or transfer the thing for storage to the owners of the public place or its representatives

If it is not possible to notify the owner and his representatives, write a statement about the find to the police or local authorities (this is important!)

If within 6 months the real owner has not contacted and has not declared a desire to pick up the find, it becomes the property of the finder.

Without writing a statement about the find to the police, you are deprived of the main proof of your innocence. Without such a statement, you can “hang” a theft case in the event that the rightful owner turns to the police for appropriate purposes.

Remember that the term of transfer to your property. 6 months. begins to be counted not from the moment of finding, but from the moment of filing a corresponding statement to the police. If you have not acted or cannot provide evidence of persistent attempts to find the owner, you are legally not entitled to the find, and the owner will be able to withdraw it at any time.

Right to compensation: the finder of the thing has the right to receive monetary compensation in the amount of up to 20% of the retail value of the thing. At the same time, there is no right to compensation if you did not file a report with the police about the find or tried to hide it.

In the case of the found Airpods, you can safely ask the owner for compensation of 2500 rubles. But only after reporting to the police. Otherwise, you risk becoming a suspect in a theft case.

Sorted it out, now specifically about the situation.

P.S. How to find lost Airpods if you haven’t gone far?

Open the proprietary Find My iPhone app. Find your Airpods in the list of devices and select the Play Sound option.

Listen carefully and walk around the area where you might have lost your headphones. When the iPhone finds them nearby, the headphones will emit a subtle squeak, which you can try to find your Airpods.

Also check the map showing the last known location of the Airpods.

If your Airpods are completely discharged, they won’t beep and won’t be found in the app. And if the headphones are found by someone and paired with another iPhone, iPad or Mac, then they will de facto cease to be your property.

So be careful and try not to lose sight of the Airpods. Well, if you find it, then remember that they are yours so far only in dreams. But according to the law. no.