How to unlock the iPad if you forgot Apple id

Three ways to unlock the iPad without password (2022)

Want to know how to unlock the iPad without using a password? Then you are on the right page. If you have problems with unlocking iPad, don’t worry. This article will discuss several options for how you can unlock your own using various procedures.

To protect the owner’s confidentiality, Apple has developed for its devices the use of use after entering incorrect passwords. This means that if you forgot your password, consistent unsuccessful attempts to unlock your iPad will lead to disconnecting your iPad.

Good news is that you can still access your device. Below are several ways to unlock iPad without password.

How to reset the Apple ID password through e.Mail

In the address bar of the browser, dial the IFORGOT address.Apple.Com. 2. Enter the Apple ID, the password from which you need to restore and click.

On the next screen, select the option “I want to drop a password” and click on.

Further, as a method of reset (restoration) of the Apple ID password, select the option “Get a message by e-mail” and click continuing.

Open the email box to which the Apple ID is tied, click on the link “Rate the password”.

On the page opened, enter and confirm the new password and click on the Password button. The password should contain at least 8 characters, have capital and lowercase (small) letters and at least one digit.

How to reset the code of the iPad using a computer MacOS or Windows

You will need to use a personal computer that is running MacOS or Windows. In the second case, make sure your operating system has a version of at least Windows 8, and the iTunes application is also installed (download). To connect your “apple” tablet to the computer, you need a branded complete cable or any other compatible. The computer must be connected to the Internet.

If neither you nor your close friends have a computer, then you can seek help for any Apple Store retail store or an authorized service center of this manufacturer.

Restore access to iPad

When unlocking the iPad, the system does not give any tips if the user cannot remember the password. Therefore, you have to resort to restoration from the backup of Tunes and ICLOUD or throw a tablet to factory settings with the loss of all information.

Icloud

The iCloud service will work only if the “Find iPhone” function is activated and the device has access to a mobile Internet or Wi-Fi, that is, it is connected to the network. For this method we need a computer.

Please note that as a result, all the data will be erased from the device, including the Parol code for blocking. However, if the function of creating backups of iCloud in the settings is enabled, then later the user can restore all the information with its help. Read more about this function in the method 3 of the next article.

Full discharge

If the user does not have backups of iCloud and iTunes, you can resort to dumping the device to factory settings. Over, all data will be lost.

• Open the iTunes program, connect the iPad to the computer.
• Hold the power button and the “home” button until the screen goes out. After that, continue to hold the “home” button and wait until the ITUNES program has an appropriate inscription that the tablet should be restored. Click OK.

Itunes

This method is similar to the method 1 from this article. It differs only in that here we will use the backup iTunes, which is created every time the device is connected to the computer and synchronizes with it. It can also be created manually. To begin with, we will need to take steps from the article below to create a backup in the program itself.

After the backup copy is created, you need to load it to the iPad.

If the iPad includes the “Find iPhone” function, then go to the method 1 of this article, since it must be turned off to restore from the ITUNES backup copy.

How to unlock the secret code for iPad icloud found my iPad

If you can’t remember the password for the iPad, but you turned on the “Find My iPad” function, you can unlock the iPad via iCloud.

You must make sure that the blocked iPad is connected to the Internet.

Step 1 Go to the website www.Icloud.Com in the browser of your computer. Enter your Apple ID and password.

Step 2 click Find the iPhone. At the top of the screen, click on all devices and select your iPad from the list.

Step 3 click wash iPad. After that, all contents and settings will be removed, including the iPad password. Then you can unlock your iPad and install it as a new iPad or restore an iPad from a backup file file.

Third.Party software

Delete the Apple ID account from the iPhone, the password of which could not be restored, can be using third.Party software. In the example, then we will use the 4ukey product from Tenorshare, which allows us to solve not only the problem of interest to us, but also remove the passwords of the screen lock and screen time.

• Download the program at the link specified above, install it and run it.
• Use the “Unlock Apple ID” in the main window.

Note: if the phone is not recognized by the program, click on the link “device connected but not recognized” located in its right corner. Follow all the proposed recommendations, then repeat the previous actions.

“Locator” disconnected

Tenorshare 4ukey software in automatic mode will unlock the iPhone, while your personal data will not be deleted.

The procedure will not take much time. After the notification shown below appears, click on the “complete” button, close the program and turn off the phone from PC.

“Locator” included

In the case when the indicated function is active, the further algorithm of action is determined by the IOS version.

To delete the account, you will need to reset iPhone settings. Instructions on how to do this will appear in the 4ukey integration, we will additionally duplicate it.

Without disconnecting the phone from the computer, open its “Settings” and go to the “Basic” section.

The necessary conditions for deleting an account on old iPhones using the software in question is the availability of the shuttle password on the screen of the screen and two.Factor authentication. If these functions are inactive, first you need to configure them.

Run the iPhone “settings” and go to the “Touch ID and Code-Parol” section.

Upon completion of this procedure, the Apple ID account will be removed from the device. Consistently use the points “Unlock using the password” and “Use the device password”, then enter the password from the lock screen that was installed and used earlier. 4ukey window can be closed by pressing the “Fully” button.

How to reset iPad to factory settings without password using iTunes

However, the use of iTunes is one of the easiest ways to reset iPad settings without password. In addition to listening to your favorite tracks, iTunes can also be used to back up or restore your iPad.

Before connecting to iTunes, you must transfer the iPad to recovery mode. Follow these instructions and find out how to reset iPad settings without password.

Step 1: Launch the updated version of the iTunes/Finder application on your computer and connect the iPad to the computer using a USB cable.

Step 2: Activate the recovery mode on your iPad.

On the iPad with the “Home” button: press and hold the “home” button and the power button until the connection icon to the iTunes/desktop appears on the screen.

On the iPad without the “Home” button: press the volume increase button, then switch to the volume decrease button, continue to press the power button until you see the connection icon.

Step 3: Then iTunes automatically identifies your device using the following hint. Click on the restoration of the button.

Circle lock

If you fail to remove the lock, let’s try to get around it. About 100%, the working method was written by Security Research Labs Ben Shlabs. He was quoted a huge number of times, confirming that the method really works. You can’t call it simple, but you can try. Conditions: you do not know either the blocking code or the Apple ID with a password. Nothing.

• Using the control point on the lock screen, activate the aircraft mode or pull out the SIM card from the slot to break the connection with the network. So you will get time to select a password.
• Choose a four.Digit password (10,000 options) or make a fingerprint imprint of the previous owner, if possible.
• After unlocking the screen, follow the setting path. Icloud. Account. Write down the data driven into the “Apple id” field. This is the Apple ID to which the device is tied, it remains only to learn the password from it.
• Go to the Password recovery site from Apple ID in the browser on a computer. Enter the Apple ID and click “Next” to proceed with the password restoration.
• Connect the iPad to the Internet via Wi-Fi for a few seconds.
• Run the mail client, open the letter from Apple and copy the link to access restoration. Immediately turn off the Internet.
• Run the browser on the computer and enter the link received on the iPad.
• Enter the new Apple ID password.
• Go to the iCloud settings on the iPad and delete the old account by entering a new password. The “Find” function will be disconnected, and with it the activation lock was removed.
• Reset the settings and content, and then set up the device as new by specifying other Apple ID data.

The instructions may well use attackers, but if you know the method, you can protect yourself from them in case of loss or theft of iPad.

Using the Doulci service

If you can’t get into the system’s integration, because you found activation blocking only after resetting the settings, you will have to use another method. Bypass using the Doulci service. Open the Hosts file on a computer with installed iTunes. Insert one of their lines into it:

Then connect the iPad to the computer in DFU mode.

You can read in detail about the input/output of the DFU mode here.

When the device tries to connect to the Apple servers to check the activation, recording in the Hosts file will redirect it to a hacker server. On Doulci servers, the activation request will be processed, after which the lock will be removed, and you can go to the iOS working screen.

This method cannot be used for iPhone and iPad with a SIM card, since after such a bypass they will remain with the functionality of the iPod: they can be listened to music and watch the video, but the devices will not connect to the mobile network. With the iPad without GSM, nothing will happen, it will work the same way as he acted before blocking.

Another minus. The owner of the Doulci servers receive information about the device, including the serial number and other individual identifiers, as well as access to personal information. So before using this method, think well and clean the cloud storage from information that no one should see.