How to turn on two Xiaomi headphones

Xiaomi

Each headset Xiaomi AirDots is equipped with a special touchpad, which is located outside of each device. This allows you to quickly connect the headset to the phone. The process of connecting the device to Android and iPhone is the same.

Sequential steps on how to connect wireless headphones to your smartphone:

  • Take both devices and press the panels simultaneously until a purple-red flicker appears. This process will reset your previous settings.
  • Put the headphones back in the charging case. There the headset should synchronize. The right earpiece is activated first, as it is considered the main one. Its readiness for use is signaled by a pale purple blinking.
  • Then go to the Bluetooth settings on your phone. There you need to select the necessary headset for the connection, which is usually labeled “Mi AirDots BASIC_R” (this name can be changed by yourself). Next, you need to connect your smartphone to the right earphone, and it will connect to the left device.

turn, xiaomi, headphones

Increase the life of the Xiaomi headset by connecting only one earphone. The procedure is quick and does not require any special skills. This requires you to select the left or right device in the Bluetooth settings, which is labeled “Mi AirDots BASIC_L” or “Mi AirDots BASIC_R” respectively.

At first, the indicator will search for a pair, as evidenced by the corresponding blinking of the indicator. But after 15 seconds, the blinking will slow down, and one earphone will start functioning on its own. Next, the device will connect to the phone.

Phone does not see the headphones

Quite a common problem. This can happen especially if you use them infrequently.

So, problems with the lack of connection can be divided into two categories:

The mechanical problem is the connector itself. In this case, the cable can’t catch the connection to the device, which means something is interfering with it.

It can be dust, dirt, debris, filth, crumbs or even water.

If you were holding the phone while it was snowing or raining, it is likely that this is the reason for the lack of connection.

To solve this problem, take a cotton swab or toothpick (only as a last resort, as it can damage the contacts, be sure to gouge the tip a bit when using it) and clean the connector in a circular motion. You can also turn the phone upside down and try to shake out all the remaining debris.

Carry out cleaning only with the phone turned off, so as not to have a short circuit!

Once the procedure is completed, place and pull the plug of the headphone inside several times. The problem should be solved. If Xiaomi phone constantly sees headphones, this method will also work.

And to prevent the recurrence of such a problem, carry your phone only in clean s and bags or buy a special plug for the headset jack.

Mi True Wireless Earphones 2 Basic. Review

Instructions for Xiaomi Mi true wireless earbuds basic

This new brand of wireless headset from Xaomi entered the electronics market this spring (2019). The presence of Bluetooth makes it possible to sync the device with your cell phone. In order to connect the device you need to perform some actions. This is what this Xiaomi Mi true wireless earbuds basic manual is written for.

The headphones come on sale covered with a special film. You will need to remove the protective cover before using them. Then the gadget should be placed in the docking station to charge its battery. While the battery is being filled with electricity, the indicator is red. When it changes to white, the device is ready for use. You can now remove the headphones from the case. After a couple of seconds, they are activated. The left device is automatically connected to the right one, which is confirmed by a white light.

The next step is to activate the Bluetooth app on your cell phone and find available gadgets. Find Mi True Wireless EBs Basic_R and click the icon in the list that appears, thus confirming the pairing operation. As a result, the contacts of the connected devices are exchanged. You will then see the status of the headset and the charge status of its battery. Now the headset is completely ready to use. In the future, the gadget will connect automatically, provided that Bluetooth is enabled on the smartphone.

How to connect the wireless earbuds to your phone

The Mi True Wireless Earbuds Basic headphones have buttons on them. We can use them to control playback and answer phone calls. But first you need to connect the headphones to your smartphone.

  • Take both earbuds out of the case;
  • Press the buttons on them synchronously and hold them for about 10 seconds ;
  • The indicators on the headphones should turn red. Now we press both buttons again to turn them on. It is enough to hold the buttons for about 2-3 seconds until the indicators turn white;
  • When only the right one blinks white, it means that the headphones are connected to each other and ready to pair with the phone;
  • Open your smartphone settings and look for Bluetooth;
  • Even if only the Mi Earbuds on the right side appear in the Bluetooth device list, both headphones will actually connect;
  • Select a device by name from the list.

Once connected, you no longer need to go through the process of connecting the Mi True Wireless Earbuds Basic to your smartphone again. If you only want to turn on the right or left earpiece, you need to reset. To do this, press and hold the button until a red light appears. Then press the button again for a few seconds and find the earpiece in the list of devices.

Setting up the Xiaomi AirDots headphones on your phone: instructions

There is no control panel on the wireless headset, which provides the ability to adjust the playback volume, frequency balance. If you want to improve the sound quality, the Xiaomi AirDots 2 headphones setup is only available through a third-party app.

Use the following algorithm:

  • In the Google Play store download the equalizer. For smartphones with Android 9 or higher.0 and above will fit Pie app, for OS 8 and below. Equalizer FX.
  • If Equalizer Pie is installed, start the program, and in the window that opens activate the “Automatic Gain Control” option.
  • Moving the sliders adjust the balance between the left and right earpiece.
  • In the “Equalizer” window, by moving the sliders, adjust the frequencies. You can also use a pre-installed profile. To do this, go to the application settings and select a preset according to the music style that the user is listening to.
  • For Equalizer FX the setting is almost the same. There are fewer effects in the application but it is also possible to adjust frequencies, customize your own profile or use a preset. In the application settings, it is recommended to enable the “Global audio output” function

Attention!

Third-party equalizer may conflict with the pre-installed MP3 player. In this case, it is recommended to download a third-party player from Play Market.

How to connect AirDots Pro 2 headphones to your smartphone?

It is worth noting that the headphones have different names Mi AirDots Pro 2, Mi Air 2 and Mi True Wireless Earphones 2, but they are the same kind of headphones with names for different markets.

  • Place both headphones in the case and close it.
  • Press the side button for a few seconds until the light on the case lights up. You only need to do this procedure once to activate the headphones, as they are supplied switched off from the factory.
  • Now press the side button again for a few seconds until the indicator on the case starts flashing.
  • The headphones are ready to pair.

In the list of available devices we find Mi True Wireless Earphones 2. Tap on this name and accept the pairing request where you can allow contact sharing. Regardless of the version of the headphones for the global market and the Chinese market, the name in the list of available devices will look exactly like Mi True Wireless Earphones 2.

After a successful connection, device status and charge level information will appear in the paired devices menu. The headphones are connected and ready for use. In future use, Xiaomi Air 2 headphones have an automatic pairing function, so next time they will connect to your phone (if your phone has Bluetooth enabled) as soon as you open the case with the headphones. You no longer need to take the headphones out of the case. Auto-connect function is supported only from MIUI 11.

You can check the charge of the headphones in the Smart Bluetooth background menu when pairing devices. The function displays full information about Mi Air 2: case charge and each headphone charge separately in percentage.

The following functions are assigned to the touch control buttons by default:

When a call comes in, double tap on either earbud to answer the call.

Double-tap the left earpiece to call the voice assistant.

Double-tap on the right earphone while listening to a track. pause/playback.

  • Charge the headphones.
  • Remove both headphones from the case and pick them up.
  • Press the buttons (mechanical or touch, it depends on the model) for about 5 seconds.
  • Press the headphone buttons again simultaneously and hold them for about 20-50 seconds.
  • Place the earbuds in the case for 10 seconds.

However, most often the sound source does not support the Multipoint function, in which case there is only one solution and it applies only to the computer. You can’t connect 2 pairs of headphones to your phone or TV.

  • Open the Bluetooth settings in Windows 10.
  • Then click on Add Bluetooth or other device and in the new window click on Bluetooth.
  • It will search for Bluetooth devices.
  • When the laptop or PC finds the headphones, just press on the headphones.
  • The headset will be displayed in the Bluetooth settings.

Instructions for Mi true wireless earbuds to pair with each other:

  • Place the headset in the case;
  • Take out and then press the buttons on the headphones and hold for at least 15 seconds.;
  • When the indicator light appears, the synchronization is reset and a new pairing occurs between the devices.

Place the headphones in the charging case, then press the function button for 2 seconds. The light on the charging case will flash, indicating that the headphones are waiting to be connected. 2. Turn on Bluetooth on your device, then find and connect to the “Mi True Wireless headphones”.

  • Place the headphones in the case.
  • Touch the touchpad area on both headphones at the same time and hold for 7 seconds.
  • When both headphones light up white light, the headphones are reset.
  • Indicators flash white ready for a new connection.