How to turn on two Xiaomi earbuds

Table of Contents

Xiaomi AirDots how to connect both earbuds to the phone?

The stylish Xiaomi Air dots wireless headphones are compact, lightweight and functional. The unique device can work uninterruptedly for up to 4-5 hours. The main thing is to know how to properly connect both Xiaomi headphones.

How to connect both Xiaomi earbuds?

Each Xiaomi AirDots earbud is equipped with a dedicated touchpad located on the outside of each device. This allows you to quickly connect the headset to the phone. The process of connecting the device to Android and iPhone is the same.

Consecutive steps on how to connect wireless headphones to a smartphone:

  • Take both devices and hold down the panels at the same time until a purple-red flicker appears. This process will reset the previous settings.
  • Place the earbuds back in the charging case. There the headset should sync. The right earphone is activated first, since it is considered the main one. Its readiness for use is indicated by a pale purple blinking.
  • Then go to Bluetooth settings on your phone. There you need to select the headset you need to connect, which is usually designated “Mi AirDots BASIC_R” (you can change this name yourself). Next, the smartphone needs to be connected to the right earpiece, and it is already connected to the left device.

How to turn the Xiaomi Mi True Wireless Basic Earbuds On and Off

turn, xiaomi, earbuds

You can increase the operating time of the Xiaomi headset if you connect only one earphone. The procedure is fast and does not require any special skills. To do this, in the Bluetooth settings, you need to select the left or right device, which is designated “Mi AirDots BASIC_L” or “Mi AirDots BASIC_R”, respectively.

At first, the indicator will search for a pair, which is indicated by the corresponding flashing of the indicator. But after 15 seconds, the flickering will slow down and one earbud will start functioning on its own. Next, the device will connect to the phone.

How to pair Xiaomi AirDots headphones?

In some cases, it is not possible to connect two Xiaomi headphones at once. Usually this situation occurs when the left device loses the right one, which is the master in this pair.

How to connect a wireless headset to each other:

  • Disconnect two devices. To do this, you will have to simultaneously hold down the touch panels on the devices. The shutdown is indicated by a red color on the indicators.
  • Turn on your headphones. To do this, hold down the touchpad again for half a minute. First, the indicator will light up white, and after 10-20 seconds a red-white light will appear, which will flash a couple of times.
  • Reset the settings. You will have to hold the touchpad again. The system should go out for a few seconds, then blink a couple of times, after which you will have to adjust the operation of the headphones again.
  • Charge your headset. In the charging case, the devices will start syncing. After that, take out the headphones and connect to the phone.

Xiaomi wireless headphones have some operational features that will have to be taken into account when connecting and setting up devices. When the headset is discharged, the indicator is red. Full charge is indicated by white light.

The touchpads will help you turn on, turn off, set up the headset, but you can’t adjust the volume with them. To find out the percentage level of charge, you will have to go to the Bluetooth settings.

Switching devices off and on is accompanied by Комментарии и мнения владельцев in Chinese. This is a normal process, so there is no need to worry about possible breakdowns. Headphones do not turn off automatically when removed from your ears.

The average operating time of the headset is 2-5 hours. Much depends on the air temperature (the colder, the faster the devices lose their charge). To fully charge, you need to put the devices in the charging case for 40-50 minutes.

To pause the music, you need to “hit” the body once. Double tap will help you connect with the voice assistant. If you need to take a call, press it twice. A single tap will help you drop an incoming call.

What to do if Airpods work separately?

Close the lid, wait 30 seconds, and then open the lid. Press and hold the setting button for a few seconds until the status light flashes white. Reconnect your Airpods by placing them next to the device and opening the lid. Follow the instructions on the screen of your device.

How to connect Airpods to Xiaomi?

There is a small button on the back of the charging case, press and hold it for a few seconds. As soon as the indicator between the earbuds flashes white, release the button. Airpods will appear in the pairing menu on your device, select them and follow all further instructions.

How to pair headphones with each other Redmi AirDots?

Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if they are there.

How to find the second Xiaomi earphone?

How to find a lost earphone via Bluetooth?

  • Go to settings.
  • Find the item “Bluetooth → Bluetooth headset → Headphones and speakers”.
  • Find your device in the list.
  • Click “Connect”.
  • After connecting, give the command to emit a signal. this way you will quickly find them.

How to find a discharged earphone?

  • The blue dot indicates the device that is being used to locate missing Airpods.
  • A green dot means Airpods are online.
  • Gray dot means Airpods are off, out of power, in a case, or out of range.

Why Airpods won’t connect to my phone?

If Airpods won’t connect, press and hold the setup button on the back of the case. Hold the setup button until the status light flashes white, then amber, and then solid white. If you still can’t connect, reset your Airpods.

How to connect Airpods to each other?

Place both Airpods in the charging case and keep using (the charging case is used for initial syncing with your device and recharging the earbuds). Place both Airpods in the charging case, plug the case into a power source, close the lid and wait 10-20 minutes.

How to use Xiaomi AirDots wireless headphones

4 hours. And if you listen to the tracks alone, then the device’s performance will increase by 1 hour. The Bluetooth headset connects in the same way. both to the iPhone and to Android.

  • Hold the touchpad of one earbud.
  • The phone settings will display “Mi AirDots BASIC_R” or “Mi AirDots BASIC_L”. whichever you choose. For example, the left one. While he is blinking often, it means he is looking for the right one. After 15 seconds after activation, it will blink less often. from this moment, the earphone is activated as an independent device. It’s ready to pair with your phone.

And yes! The sound of the AirDots babies is what you need. With bass too. But only if you choose the right ear pads that come with the kit. They should fit snugly into the ear canal. A sure sign of “your” size. when “ears” are not felt when worn.

How Xiaomi Wireless Headphones Work

When you take the earpiece out of your ear, the music doesn’t stop like it does with Airpods. The devices are disconnected only in the case, and are connected back to the phone when they are taken out:

  • put only the left one in the case, it will turn off, and the right one will work;
  • remove the right one. both will turn off.

Headphones work with voice assistants Siri, Google Assistant, Alice. The controls are intuitive:

  • 1 touch. pause or answer a call;
  • double. call the voice assistant. The only thing that is inconvenient: when you want to fix the earpiece and inadvertently press the touch panel, the music will stop;
  • holding one or more seconds. canceling the call;
  • double tap during a call. mute the microphone.

How to connect Bluetooth headphones to your phone

The Xiaomi AirDots feature is the touch panels on the outside of each earphone. They can be used to connect Xiaomi wireless headphones to the phone.

  • Press and hold both earbuds until you see a double purple-red blinking. This is a signal that you have reset the settings.
  • Put them in the charging box for a while, take them out and wait for the devices to “find” each other. As soon as this happens, you will see a pale purple blinking of the right earbud. He is in charge.
  • Go to the Bluetooth settings of your smartphone. Available devices will display the designation “Mi AirDots BASIC_R”. These are your headphones. The phone will connect to the right one, and that will connect to the left.

Sometimes AirDots sync separately. The reason. the left “ear” “loses” the right.

Read more:  How to get the watch out of the Xiaomi 4 case

4 things to do if one wireless earbud doesn’t work.

  • Unplug the two earbuds: hold down both touchpads until the red lights turn on.
  • Hold for 30-50 seconds: first, the white indicator will turn on, then, after 10-20 seconds, it will light up in red-white. The indicator will blink 2 times.
  • Continue to hold until they flicker a couple of times and go out for a few seconds. Then they flicker a couple more times. this means that the settings have been reset.
  • Now put the “ears” in the case and take out both of them shortly. The left one will look for the right one, synchronizes with it, and you can connect to the phone.

How to charge wireless headphones

Xiaomi AirDots charges the case, and it itself is powered by micro USB. Not 1.5 hours. as the manufacturer assures.

45 minutes. The case is equipped with a 350 mAh battery, it is enough for three recharges.

  • If the diode does not flicker and glows red, the battery is charging.
  • White color indicates 100% battery charge.

Watch the video review of Mi AirDots, their problems and solutions

Leave your opinion and wishes to the article “How to connect Xiaomi AirDots wireless headphones”

How to connect 2 Mi True Wireless headphones?

Automatic connection. Take both earbuds out of the charging case at the same time and wait 2-3 seconds until they turn on automatically. When the indicator on the right earbud starts blinking white slowly, you can find “Mi True Wireless Earbuds_R” in the Bluetooth settings on your device.

What to do to make both headphones play?

To turn on the pairing mode, you need to hold both headphones, or rather their touch panels located on the outside, for a few seconds, until the white indicators light up. After that, only the right earphone will start blinking. this means that the earbuds are available for pairing with your device.

How to pair between headphones?

To enter the headphones into pairing mode, you must first turn them off and then turn them on again (by holding the buttons for 2 seconds) and after turning on continue to hold the two buttons until the right earphone emits a signal and starts flashing blue. May 13, 2019.

How to use Redmi AirDots headphones?

How to connect both Redmi AirDots headphones to the phone

  • First, the user needs to hold both devices until the indicator turns purple-red.
  • Then you should put the headset in the case and wait a couple of seconds for “ears to find each other”.

How to connect a second Airpods earphone?

  • Go to the Home screen.
  • Open the case that contains the Airpods and place it next to the iPhone.
  • The iPhone displays a setup animation.
  • Click “Connect”.
  • If you have Airpods Pro, read the on-screen instructions.

How to connect a second earphone Redmi AirDots?

  • Press the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made.

How to reset Redmi AirDots?

How to reset AirDots to factory settings

  • Press and hold the buttons on the headphones to turn them off.
  • Now press the keys again for 30-50 seconds until the indicators turn white, then wait for the indicators to flash white and red after another 5-20 seconds.
  • Place the headphones back in the case.

How to sync Mi True Wireless?

Instructions for Mi true wireless earbuds to pair with each other:

  • place the headset in the case;
  • remove and then press the buttons on the headphones and hold them for at least 15 seconds;
  • when the indication appears, synchronization is reset, and a new pairing occurs between the devices.

How to reset Bluetooth headphones?

To restore factory settings, press and hold the function button for 10 seconds while the headphones are turned off. all Bluetooth pairing information will be deleted.

How to connect 2 Mi True Wireless headphones?

To connect, remove both earbuds from the charging case at the same time and wait 2 seconds until they turn on. After switching on, the left earbud automatically connects to the right one, the indicator of which starts flashing white. Moving on to the smartphone. Turn on Bluetooth and search for available devices.

How to connect Airpods to Xiaomi?

There is a small button on the back of the charging case, press and hold it for a few seconds. As soon as the indicator between the earbuds flashes white, release the button. Airpods will appear in the pairing menu on your device, select them and follow all further instructions.

How to pair Redmi AirDots?

  • Press the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made.

What to do if AirDots work separately?

If, after the reset, the phone began to see the left and right headphones separately, you need to connect only the right one to the phone, and when it starts playing sound, you will need to press the power button on the left. it should connect to the right one. If it doesn’t work the first time, try resetting again.

How to pair headphones?

Activate pairing mode on the Bluetooth headphones. Press and hold the power button or ID SET button. When the indicator starts flashing quickly, release the button. Bluetooth headphones enter pairing mode.

How to sync Redmi headphones?

Unplug the two earbuds: hold down both touchpads until the red lights turn on. Hold for 30-50 seconds: first, the white indicator will turn on, then, after 10-20 seconds, it will light up in red-white. The indicator will blink 2 times. Continue to hold until they flicker a couple of times and go out for a few seconds.

How to connect two Xiaomi headphones?

Press the buttons on both earbuds until a red light appears. Place the headset in the charging case. Next, take the headphones out of the case and wait until they pair up. Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.

How to output audio to two devices simultaneously?

Stereo mixer in Windows 10: outputting sound to two devices at the same time Open the sound options (by clicking on the corresponding icon in the tray with the right mouse button) and go to the sound control panel. In the “Sound” window, check that the “Speakers” device is in the “Device by default” status.

Is it possible to connect wired and wireless headphones at the same time?

If you are lucky, all headphones and audio source support the Multipoint function, then you can try connecting 2 pairs of wireless headphones to one source at once, in which case you do not need to worry about anything else. you will not be able to connect 2 pairs of headphones to your phone or TV.

How to connect 2 pairs of Airpods to a laptop?

Make sure Bluetooth is turned on. Place both Airpods in the charging case and open the lid. Press and hold the setting button on the back of the case until the status light flashes white. Select Airpods in the list of devices and click the “Connect” button.

Is it possible to connect two pairs of wireless earbuds to one phone?

If you are lucky, all headphones and audio source support the Multipoint function, then you can try connecting 2 pairs of wireless headphones to one source at once, in which case you do not need to worry about anything else. you will not be able to connect 2 pairs of headphones to your phone or TV.

Review and headphones Xiaomi Earbuds / Review and connect

How to connect 2 QCY earphones?

  • We hold both headphones in the off state, hold, after which they turn on, blink and turn off, continue to hold, they turn on again and blink three times, release, then they turn off again
  • Turn on with a short press, wait for pairing
  • Checking if it should work

How to make to connect two headphones to a computer?

Go to the computer settings or to the control panel, select the “Hardware and Sound” section, configure the sound transmission using a virtual cable. Start “audiorepeater” by connecting VAC to all used headsets via Bluetooth. Click on the signal source (Wave In) by selecting “Line1 Virtual Audio Cable”.

How to connect both Redmi AirDots earbuds

Wireless headphones have become fashionable not so long ago, but they are conquering the market at a tremendous pace. Xiaomi was no exception and entered the race with two popular models to choose from: Xiaomi AirDots and Redmi AirDots (from the sub-brand). These inexpensive devices are perfect for music and movie lovers. The presence of a charging case and the modern version of Bluetooth 5.0 will allow you to enjoy high-quality sound for 12 hours.

How to connect both Xiaomi AirDots headphones?

Each of the earbuds of the headset is equipped with a touch panel. It is on the outside and helps you manage your playlist, settings and multimedia.

To sync Xiaomi AirDots headphones and a smartphone, follow these steps:

  • Touch the touchpads on the earbuds and hold your fingers until a purple blinking appears. Thus, the settings are reset.
  • Place them in the case for mutual synchronization, and immediately after that, take them back out. In this case, the right one will flash in a pale purple color.
  • On your smartphone, start searching for devices in the Bluetooth manager.
  • Find the right earbud in the list, it is designated as Mi AirDots BASIC_R. Synchronization with the left is automatic.

If everything is done correctly, the headset will work normally.

Reset

A common problem is when one earphone cannot connect with another and, as a result, there is no sound in the channels. To fix the problem, you need to do a hard reset.

  • Remove pairing with smartphone.
  • Remove both earbuds from the case, hold down the buttons for 5-7 seconds until a red backlight appears.
  • Then hold the buttons again for 30-60 seconds. At first they will flash white, after 10-20 seconds. twice red-white and then again red-white. wait until they go out.
  • Place the earbuds in the case.
  • Remove from case, wait for synchronization and connect to smartphone.

Fast Bluetooth connection

  • Turn on the phone to search for Bluetooth devices.
  • Take the headphones out of the case and wait about 3 seconds until they turn on. Wait for switching on. the right one will blink white
  • Find Mi True Wireless EBs Basic_R in the manager and set up pairing.
  • If the synchronization was successful, then the charging level of each earbud will be displayed under the name of the device.

After the first connection, in the future, the headphones themselves will pair with the phone when turned on, the only condition is active Bluetooth.

Solving common problems

With long-term use of AirDots, various problems may appear:

Most of the time, Android, games and Bluetooth headsets are incompatible, there is often a large lag in audio. There is no solution to this problem, the reason is in the principles of audio processing from games by the operating system.

The Bluetooth channel is not stable, there are interference and interruptions. this is normal. However, if malfunctions are a constant symptom and with a slight shielding of the earbuds or the phone (for example, if you cover the speakers with your palms and the signal disappears), then this is a factory defect. A similar situation with fast discharge. the only solution to the problem is an exchange under warranty.

Find your lost earpiece using the Bluetooth Scanner software. It is necessary to give her access to the location and after moving in the place of possible loss, monitor the signal level of Mi True Wireless EBs Basic_R / L or Redmi R / L. The lower the number, the higher the signal.

Read more:  Monitor Does Not Turn On When Starting Computer

Or you can turn the volume up to maximum and try to find them by sound. But it’s worth remembering that the Xiaomi headset automatically turns off after 5 minutes and it will be difficult to find it in this way.

How to connect both Xiaomi AirDots headphones to the phone

Everyone is good at Xiaomi AirDots or Earbuds headphones: they are sold at an affordable price, they look beautiful, have a long battery life and sound very confident for their category.

But, unfortunately, there are no perfect products, users noticed a problem with Xiaomi headphones, which is expressed in the fact that sometimes they lose synchronization with each other.

Как правильно настроить наушники Xiaomi Redmi AirDots. Earbuds

Fully wireless earbuds (TWS) from Xiaomi work as follows: when you take them out of the case to listen to music, the first thing they need to do is automatically find each other and sync, after which one of the earbuds (most often the right one) becomes the presenter, and second slave. The lead earphone connects to your phone or computer.

It is the presenter who receives the sound or music from the source and transmits it to the slave headphone, so the connection of both is very important. But sometimes it breaks down, so you only hear sound from one Xiaomi earphone.

We connect both Xiaomi headphones

I am considering a situation in which the headphones worked normally before, but at one sad moment something happened, and you started to hear sound from only one of them.

I also assume that there is no physical breakdown, you did not drop them, water did not get on them and each battery is charged, then there is a chance to connect both and at once, as expected.

In this case, I propose to adhere to the following algorithm of actions, which in 95% of cases solves the problem:

    The easiest way is to break sync with your phone and reinstall it. To do this, in the “Bluetooth” settings on your smartphone, find TWS Xiaomi, click on the arrow next to them and in the menu that opens, select the “Unpair” command;

  • Put both earbuds in the case, wait 10 seconds, remove them. If they have not entered pairing mode on their own, press and hold on both of the touchpads for 10-15 seconds until they flash in different colors. This means they are looking for a new audio source to connect. Take your phone and from the Bluetooth menu under Available Devices select the name of your TWS. If they are designated as “L” and “R”. left and right respectively, always choose “R”. he must be the leader;
  • If the first two points did not work, then you need to reset the Xiaomi TWS settings, to do this, place them in the case, hold for 10 seconds, then remove and hold down on the touch panel of both for 40-50 seconds. They should beep and the LED should go out. Then place them in the case for 10 seconds and remove. In this situation, they should automatically enter pairing mode, find them in the menu on the phone and enjoy the operation of both headphones at the same time.
  • This can be helpful:

    Hi, my name is Timur. Since childhood, I have been fond of computers and the IT Industry, I like it, this is my passion. Over the past few years, I have been deeply interested in Xiaomi: ideology, technology and a unique approach to explosive business growth. I own many Xiaomi gadgets and share my experience of using them, but most importantly. solving problems and incidents that arise under unexpected circumstances on the pages of Mi-check.ru

    How to connect 2 Airpods to one phone?

    Connect your headphones to the iOS device. Launch the settings and go to the Bluetooth section. Open the case with your second Airpods and hold the pairing button (or the power button on Beats) until the light starts blinking. Wait for the headphones to appear in the “Other devices” section and select them.

    How to sync Redmi AirDots?

    First, read later, connect according to the instructions: Cancel pairing (remove the headphones) on all devices: smartphone, computer Remove both headphones from the case and unplug them: hold down the buttons for 6 seconds until the red LEDs light up again, hold down both buttons for 15 seconds: at first they will blink white, after 10

    How to connect two Airpods?

    Press and hold the pairing button on the second Airpods or Beats until their indicator light pulses white. When the headphones appear in the Other Devices section of the menu, select them and wait for the connection. Your iPhone now has two pairs of Airpods or Beats headphones connected.

    How to pair headphones with each other Redmi AirDots?

    Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if they are there.

    How to find the second Xiaomi earphone?

    How to find a lost earphone via Bluetooth?

    • Go to settings.
    • Find the item “Bluetooth → Bluetooth headset → Headphones and speakers”.
    • Find your device in the list.
    • Click “Connect”.
    • After connecting, give the command to emit a signal. this way you will quickly find them.

    How to make both wireless headphones work?

    • Open Bluetooth settings on your phone and turn it on.
    • Find these headphones in the list.
    • Remove them from the list.
    • Now turn off Bluetooth.
    • Take a case with charged headphones.
    • Take out both earbuds.
    • Hold the buttons on both earbuds and hold until both of them start blinking.

    Is it possible to connect wired and wireless headphones at the same time?

    If you are lucky, all headphones and audio source support the Multipoint function, then you can try connecting 2 pairs of wireless headphones to one source at once, in which case you do not need to worry about anything else. you will not be able to connect 2 pairs of headphones to your phone or TV.

    What to do if wireless headphones won’t pair with each other

    If the headphones stop syncing or are not working correctly right after purchase, you can fix the problem yourself. At first, only one turns on. it starts flashing characteristically. Then the second device is activated. Now the power button is pressed twice quickly. If the connection is successful, you will be able to pair two headphones.

    • Resetting the settings manually. There is a special button on the case of some models, but if you are not there, you will have to get both headphones and press the power button for about a minute. The LED will light up and then start blinking and then go out. This means that the settings have been reset, and now you have to re-create the connection to the phone.
    • Cancel pairing. A popular mistake among people is connecting a gadget without prior synchronization. To fix the problem, you have to force the phone to forget the device. This is done through the Bluetooth settings on the smartphone. After the connection is carried out on a new.
    • Resetting the settings manually in the case. For the procedure, the device is not removed from the box. it should be turned off while it is inside.
    • Resetting the settings on the case. Some chargers have a dedicated button. The headphones are placed inside, and then it is pressed and held for at least 60 seconds to reset the settings.

    After completing the required steps, you must turn on the device again and re-pair the headphones with each other, but this time follow the instructions. To facilitate the process, you can see

    When reconnecting, sometimes problems arise, for example, the headset does not connect to the phone. It is recommended to make sure that the charge is 100%. You will also have to restart Bluetooth on your smartphone and try to detect the model again. It is recommended to turn the phone itself on and off if the previous advice did not help.

    Often times, headset sync problems are caused by the person. It is recommended to carefully follow the instructions when connecting for the first time.

    How to connect two Bluetooth earbuds to one Android or iPhone phone at the same time

    Sometimes it becomes necessary to simultaneously connect two pairs of Bluetooth headphones to one phone. Some devices support this feature. The connection order depends on the operating system. The simultaneous inclusion of two devices on the iPhone is possible if the device runs on iOS and iPadOS 13. The function is supported by all smartphones, starting from iPhone 8. The option also works on iPad and iPod touch.

    To connect two devices at the same time, the AirPlay application is used. Another wireless, before adding, is first placed in a case and opened next to an iPhone or other device from Apple. The “Temporarily share audio” option is activated on the phone and the correct device is selected.

    Some Android phones can also pair two Bluetooth devices at once. For example, this feature is present on the Samsung Galaxy S8, S8, S9 and Note 8. called Dual Audio. To connect two pairs at once, go to the Bluetooth settings menu. Select the icon with three dots and Dual Audio opens. It remains to activate the function, after which it will be possible to connect to Android 5.0, 5.1 at once two pairs of identical headphones.

    How to sync Bluetooth headphones with each other

    Standard instructions are used to activate wireless models. Before the first synchronization, the next point is taken into account. Usually, one headphone is the main one and the other is the slave. From the first, signals are sent to communicate with the smartphone. First, the main one gets out of the box, otherwise the secondary will connect to the phone earlier. As a result, synchronization will not occur, and the headphones will only work one at a time. The main device is designed for the right ear.

    When connecting for the first time, you must follow the instructions so that there is no desynchronization. Otherwise, you will have to restore the factory settings and reconnect the gadget.

    • In the phone’s memory, in the list of paired devices, you have to find the model and click on “Forget device”. It will turn out to cancel the previous connection. This point and the next two are skipped by people connecting the device for the first time.
    • The device is taken out of the box, and the power buttons on the left and right elements are clamped. Hold for about 15 seconds. If there are no buttons, then the models turn on automatically when removed from the charging case.
    • Turn the headphones back on and enter pairing mode. To do this, the power button is pressed for 2 seconds.
    • If the device does not activate, you have to put it on charge. For some models, this requirement is considered mandatory before the first synchronization. It takes 1-2 hours to fully charge.
    • If the instructions are followed, it is possible to connect both headphones at once, and sometimes this is accompanied by light indexing or voice prompts.
    • If the process does not start automatically, you will have to initiate it manually. Hold the dedicated pairing button with the Bluetooth icon, it looks different on devices.
    • Bluetooth on the smartphone turns on and the settings open. Connectable headphones are selected from the list of available devices. If the model is not displayed, it is recommended to search again.
    • Some smartphones ask for a PIN code to connect the device. Enter the standard “0000” or the one written in the user manual.

    If there are no problems, it is possible to successfully connect both earbuds to each other, they should not lose connection with each other. Music plays without delay, no interference.

    Read more:  What is the difference between the version of Global Xiaomi

    What is pairing mode in Bluetooth headphones

    Many headphones are set to automatically sync with each other when connected to a device via Bluetooth. For people, the process goes unnoticed. At the first conjugation, signals are sent, data is exchanged between the right and left elements. The headset is unable to sync if something is causing interference.

    The fact that the headphones play separately is due to various reasons. For example, the synchronization procedure was performed incorrectly, because the user ignored the instruction to turn on the device. If the headphones are far from each other, they may work with interference, disconnect for a while. They are kept at a close distance, no more than a meter.

    Some devices cannot be removed from the charging box to work. You will have to press the power button on each, otherwise synchronization will not occur. Problems also occur if the devices are discharged, or there is a powerful Wi-Fi router nearby that blocks the signal. It is recommended to remove and send for charging, or move to another place where to try again.

    Some models only sync when pairing mode is on. To activate, the power or play button is held down for a few seconds. If pairing mode is off, the devices will not work correctly. On some models there is no power button, as the devices are paired when removed from the box.

    Sony headphones pairing buttons

    When troubleshooting a malfunction, you will have to focus on a specific gadget model. Along with it comes an instruction, which indicates the procedure for the first start. The manufacturer explains to the buyers the rules for using the model, informs about possible problems.

    How to sync two wireless bluetooth headphones with each other

    Wireless headphones are convenient because people don’t have to untangle wires. There are expensive and cheap models on sale. With the latter, problems often arise, for example, there are problems when connecting to the phone: the headset is not detected, or it does not work correctly. It is recommended to synchronize the headphones according to the instructions so that the problem disappears.

    Features of pairing different models and brands of headphones

    The principle of operation of the headset is similar for different brands, but there are some differences. For example, to connect Chinese Xiaomi Mi True Wireless with aliexpress, both headphones are removed from the case and the power buttons are simultaneously pressed for 5-6 seconds. The red indicators light up. Then the power buttons are pressed again and are not released for 15 seconds. The indicators flash at this time.

    The power buttons are pressed and held for 3 seconds. I manage to connect to my smartphone and use headphones.

    To connect Apple Airpods (original) to the device, the case with the device is opened and placed next to the smartphone. The screen saver of the configuration process and the “Connect” button appear on the display. To continue using, click “Finish”.

    To activate Redmi AirDots, the device is first charged. The indicator should change from red to white and then go out. The device will automatically pair when removed from the case. Both earbuds are removed and switched on after 2 seconds. The right indicator will blink white. The phone scans for available devices and allows contact sharing.

    It is allowed to connect JBL wireless earbuds, not fake, after fully charged. The pairing mode is activated on the headset after pressing the corresponding button for 3 seconds. Its presence is written in the instructions that come with the gadget. On some models, the power key is held down until it blinks. It will remain on the phone to turn on Bluetooth and find the option of interest in the list of available devices.

    Lenovo Wireless Headphones easily connect to another device. To activate, they are taken out of the case. the indicator flashes blue. If the light is off, pairing mode is activated beforehand. During the procedure, the device is not connected to other devices.

    For synchronization, the QCY headset is placed in the case, then the right earpiece is taken out, a finger is applied until the indicator blinks red-blue. A device appears in the phone settings, and a connection is made to it. Now the left is activated, the synchronization between it and the right happens automatically, you don’t have to switch anything.

    After purchasing a TWS device for connection, the case opens, but the headphones remain inside. The button on the charger is clamped. If there is nothing on the box, then the scheme of actions is different. The headphones are put on, and the button or touchpads are clamped on them, and released after 7 seconds. It remains to set up the connection to the headset on the smartphone.

    If nothing works to activate the wireless headphones, it is recommended to make sure that there are no breakdowns and system failures. To do this, you need to contact the master and diagnose.

    How to synchronize earbuds with each other

    Often, after connecting the Airdots, the sound comes from only one earphone. This may be due to the fact that the Xiaomi device did not have time to sync with each other. As a result, only one of them was connected via Bluetooth. In such a situation, you need to reconnect them by resetting the settings. You also need to remove the model name from the list of connected devices via Bluetooth. To do this, go back to the settings window and find AirDots in the list.

    Then click on the arrow opposite the model name. In the next window, select “Delete”.

    In some phones, there is a cross next to each connected device, clicking on which removes the device from the list of connected ones. To reset the settings on the headphones, you need to take both in your hands and hold down the button on them for 45 seconds. During this time, the indicators on the buttons should light up red. Then they should flash white about 10 times.

    When you have reset the settings, repeat the instructions for connecting them from the first section of the article. Thus, you will be able to connect both Xiaomi AirDots headphones to your smartphone or laptop with Bluetooth. The inserts may become out of sync with each other due to the fact that they have been lying on a shelf or in a desk drawer for a long time outside the charging case. This even happens with headphones that were previously paired with the phone and both worked synchronously. Therefore, it is important not to leave them out of the case.

    How to sync Xiaomi AirDots headphones with each other

    When buying a new device, we often encounter problems when setting up and connecting it. In this article, you will learn how to synchronize Xiaomi AirDots wireless Bluetooth headphones with each other.

    How to connect both Xiaomi AirDots headphones to the phone

    When connecting headphones, users are often faced with the fact that music plays in one headphone, but not in the second. Although both earbuds appear in the list of connected devices in the Bluetooth menu.

    Perhaps this is some kind of factory defect in the entire AirDots line. Or a flaw in the model with a synchronization problem. This is also due to the fact that the headphones can be separated. You can connect only one of them to the phone, while the second to the laptop. Or lend it to another user to listen to music on his smartphone.

    Even if you try to connect the second Xiaomi AirDots earphone in parallel, it will be connected, and the second one is disconnected. And so it will continue indefinitely. Let’s take a look at how to sync them correctly.

    When unpacking, you need to remove the case with inserts from the package:

    • You need to immediately make sure that the battery of the case and headphones has enough charge to connect with each other;
    • Remove both devices from the case and wait a few seconds. At the beginning, the indicators on their case will glow red;

    This manual will be useful for those who have not connected AirDots to the phone before. If you have already done this, but without success, read the next section of the article.

    What to do if Xiaomi AirDots headphones do not connect

    Even if the above recommendations are followed, users may have problems connecting AirDots with each other. Connect the case to the charger and place the headphones in. Leave them in this position for half an hour. The owner of the headphones should also take into account that in some cases, synchronization occurs even if the white indicator is not displayed. This means that after removing the device, you need to wait approximately 20-30 seconds. Then try to connect them to the phone.

    Features of using a wireless device

    The Redmi AirDots headphones do not have a touchpad like many other wireless devices. Instead, there are mechanical buttons on the case. Some people like them better, as the sensor often reacts to touch when we just adjust the earpiece. But there is also not enough. the mechanical button has to be pressed with effort. As a result, the earmold is pressed deeper into the ear, which causes discomfort.

    Using these buttons, we synchronize the wireless headphones of the Xiaomi AirDots model with each other. We can also control the music player in the phone. By clicking on any of them quickly twice on the button on the phone, we will call the voice assistant.

    If you press the button once, the music playback will stop. Press again and the music will continue to play. Each earphone has a built-in microphone that transmits sound to your interlocutor with a fairly high quality during a conversation. Most users also have no complaints about the sound quality of this device.

    How to pair headphones with each other Xiaomi?

    • Press the buttons on both earbuds until a red light appears.
    • Place the headset in the charging case.
    • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
    • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), the connection will be made.

    How to sync Airpods with each other?

    On your iPhone, go to the Home screen. Open the case that contains your Airpods and place it next to your iPhone. The iPhone displays a setup animation. Click “Connect” and select “Finish”.

    How to sync two Airpods?

    • Place both Airpods in the charging case;
    • Open the cover and check the status light.
    • Connect the case to a power source, close the lid and wait 40 minutes;
    • Then open the cover, press and hold the setting button on the back of the case for a few seconds.

    How to connect 2 Mi True Wireless headphones?

    First, read later, connect according to the instructions: Cancel pairing (remove the headphones) on all devices: smartphone, computer Remove both headphones from the case and unplug them: hold down the buttons for 6 seconds until the red LEDs light up again, hold down both buttons for 15 seconds: at first they will blink white, after 10

    How to reset Bluetooth headphones?

    To reset both the over-ear and over-ear wireless headphones, unplug them. Then press the three buttons simultaneously (Call, Volume and Mute) and hold for 3-5 seconds. Wait until the indicator light flashes red or blue 1 time.

    How to pair two Bluetooth headphones?

    Enter the Bluetooth settings on the phone (Bluetooth must be on) Find the name of the headphones you want to connect in the list of available devices Click on them and wait a few seconds, after which the connection will be established and the headphones will be connected to Samsung.