How to turn on ringtone on iPhone 7

Do Not Disturb Mode

When Do Not Disturb is activated, the iPhone will remain silent and the screen will remain off for incoming calls and messages. However, you can set up exceptions so you don’t miss an important call.

turn, ringtone, iphone

There are two ways to enable Do Not Disturb mode. The simplest of them is to slide your finger across the screen from bottom to top, calling up the “Control Center”, and click on the crescent-shaped icon.

The crescent moon icon in the Control Center status bar will also indicate that Do Not Disturb is on:

You can also go to “Settings” → “Do not disturb” and slide the switch opposite “Do not disturb”.

You can choose a specific time when you want the iPhone (iPad) to go into silent mode (for example, at night from 23.00 to 6.00). In addition, the settings allow you to select contacts from whom you can receive calls even when the Do Not Disturb mode is activated. Allow Calls allows you to allow calls from everyone, anyone, selected users, or specific contact groups.

The “Repeated calls” option allows you to receive repeated calls from especially persistent ones, if they were made within three minutes after the first one. Silence mode lets you turn off beeps whenever or when iPhone is locked.

Why is my iPhone not ringing

How to properly configure Do Not Disturb mode on iPhone, iPad and Mac, we talked in detail in this article.

Silent mode on iPhone

The easiest way to turn off the sound on your iPhone is to use the toggle switch located above the volume buttons on the left side of the case. Surely many are already instinctively reaching for the switch, going to the cinema, school, church, etc., without even realizing it.

Calls and sound notifications included:

Calls and sound notifications are turned off:

The above method turns off the sound of calls, messages, notifications and even games, however, when an incoming call is made, the iPhone will still vibrate, and when an SMS is received, the screen will light up. You can turn off vibration by going to “Settings” → “Sounds, tactile signals” and moving the switch to the left opposite “Vibration in silent mode”.

Even though vibration will be disabled, the screen will still light up when there is an incoming message.

IPhone Silent Mode vs. Do Not Disturb Mode Differences

IOS provides two ways to prevent your iPhone from ringing when inappropriate situations. For example, you can turn on silent mode (using the toggle located on the side) or configure the software Do Not Disturb feature. Both methods turn off the sound, but there are significant differences between them, which are not known to everyone.

When is Silent Mode or Do Not Disturb Mode Recommended?

The main difference between the above two modes is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your or bag, then there is nothing easier than mute the sound by sliding the switch with one movement of your hand. However, keep in mind that vibration can be just as annoying and eye-catching as a ringtone.

If you always hold the device in your hand, on your lap or on a table, then it is best to use the Do Not Disturb mode so that the luminous screen does not catch your eye and does not cause unnecessary attention.

How to turn on the ringer volume on iPhone

On iPhone, you can mute an incoming call. This can be done using a dedicated switch or through the settings. Below we will show you how to turn sound on or off on iPhone.

This method is relevant for iPhone 7 and newer. For older models go to Sound Settings.

No sound on incoming call on iPhone. Do Not Disturb is activated

If the ringtone on your iPhone stops ringing, check to see if Do Not Disturb is turned on. Users often mistakenly activate this mode without noticing it. If you see a crescent-shaped icon at the top of the screen, it means that you have Do Not Disturb mode turned on, which turns off all sound notifications.

Solving this problem is as easy as shelling pears. Open Control Center and turn off Do Not Disturb mode. The beep should now appear again.

You can change the Do Not Disturb settings by going to Settings → Do Not Disturb.

Troubleshooting with AssistiveTouch

Go to Settings → Accessibility → Touch.

Go to the AssistiveTouch section and activate this function through the corresponding toggle switch. A virtual button with additional menus will appear on the screen, which can be positioned anywhere on the display.

Tap on the AssistiveTouch menu and select “Apparatus”.

On the right there should be a “Mute” icon with a crossed-out bell (if not, then put this function in this position), and on the left, tap on the “Louder” (volume up) button to increase the ringer volume.

Read more:  How To Sync Contacts On iPhone With Icloud

Disable AssistiveTouch as unnecessary.

Turning on

It is not difficult to turn on the sound of an incoming call: you need to switch the toggle switch on the side of the gadget. It is intended to be in a position where the red stripe is not visible.

Silent mode enabled

But sometimes the settings get lost, or the mode of use is chosen that is not suitable for the situation.

The ring signal is configured in a standard way. Check the position of the switch on the side of the machine. If at the top, beeps will be heard. If at the bottom, the sound is completely turned off and the owner will not wait for notifications about calls, messages “out loud”. Try to switch, the problem most often was this.

The call is not accompanied by a sound signal due to the out of order settings of the gadget. Try:

  • open the “Settings” of the phone;
  • select the item “Sounds”;
  • go to “Calls and alerts”.

If the slider is on the right: the melodies are heard. Left: iPhone is muted. You may have selected the wrong mode, or accidentally turned on Do Not Disturb or Airplane. Options exclude receiving signals, messages, notifications. Information is available through the menu, “Settings”.

How to turn off sound on iPhone

The easiest way to put your iPhone on silent is with a dedicated switch on the left side of your smartphone. It is located above the volume buttons and serves to mute the sound on the iPhone.

When the switch is closer to the back of the smartphone and the orange indicator is visible, the sound is muted. When you slide the switch to this position, an icon with a crossed out bell will appear on the screen.

To enable ringtone on iPhone, slide the switch closer to the front of your smartphone. The bell icon reappears on the screen.

How to turn on flash on iPhone 7 on calls and SMS notifications

Unlike androids and other phones, the iPhone 7 does not have a dedicated indicator for notifications.

Instead, it features for the deaf or hard of hearing, a feature that uses flash to provide a visible signal for incoming notifications. This is in addition to the usual vibration already provided by the system.

Whether you need flash notifications on call or just want to turn them on, after enabling this feature, all you have to do is leave your phone in sight so that you don’t just hear incoming notifications, you see them.

Your iPhone 7 will blink a flash when you receive call, SMS and message alerts.

When enabled, the LED will blink several times for every call or message on the device, even if it is in silent mode.

This wonderful technology offers an obvious visual cue with a bright blinking light when any warning or notification arrives. a great feature that isn’t very well known, but I’ll show you how to turn it on.

How to set a flash on an iPhone 7 on a call

The use of LED flash for notifications is possible in all modern versions of iOS and iPhone devices. This is how you can customize this feature for your.

Click on the Settings app and then on General / General. Select “Accessibility / Accessibility” in Settings.

Find “Flash for Alerts” and click on that. Now flip the switch to the active green position.

Upon receiving an incoming message, phone call, or alert, the LED flash on your iPhone 7’s camera will blink, showing a visual indicator that notifications or alerts are being received on the device.

Undoubtedly useful not only for those with hearing problems, but also really useful for those of us who constantly keep our phones muted, volume down or just want something more obvious.

This setting is supported by all modern versions of iOS, although it has been around for quite some time and this setting may look slightly different on newer and older models.

Please note that once you turn on LED alerts, you have another option to turn them on when your phone is turned off. Also, this feature only works when your screen is locked.

Another useful option is the Call Alert feature, which can be found in Settings → Phone → Voice Calls.

Siri will announce the name of the caller to make it easier for you to decide if you want to answer or ignore him.

You can choose to have Siri always announce calls, with headphones and car only, or with headphones only.

How to disable flash on iPhone 7

Keeping iPhone 7 in LED flash mode may negatively impact battery life.

Therefore, you should consider disabling the mode as soon as you are done with the need to use this alert mode during calls and SMS notifications.

Actually, there is nothing to describe, since this is just the reverse process. Press Settings, General, tap Accessibility and scroll down.

There click on the LED flash for alerts. On the next screen, you can disable it by moving the switch to the OFF position (make it white). Also, turn off on the mute option. Have a good day.

How to set your own vibration pattern for a call?

In the next window, click on the topmost item “Vibration”.

Here you can choose one of the standard options, or specify an arbitrary one. To do this, select “Create vibration”.

You will need to specify an individual vibration by touching the screen.

This way you will have your own original vibration on the iPhone.

Call mode

To put iPhone into Ring mode, slide the switch to the position where the orange mark is not visible.

How to turn off vibration during a call or in silent mode

When it comes to disabling vibration, most often they mean the vibration that appears during a call in normal or silent mode. If you also want to turn off this particular vibration, then you need to follow these steps.

Open your iPhone settings and go to the settings section called “Sounds”.

Then scroll down the settings until you see the “Vibration” subsection. Two functions will be available here: “During a call” and “In silent mode”.

The During Call feature is responsible for enabling and disabling vibration that appears during an incoming call. If you disable it, then during a call, only a beep will be played. And the “In silent mode” function is responsible for enabling and disabling vibration from an incoming call during silent mode. If you turn it off, then in silent mode, the iPhone will not make any sounds or vibrations at all.

Read more:  How to transfer to the cloud on iPhone

Features of disabling the function on different iPhones

The vibrating background can accompany both melodies of incoming calls and work in silent mode. Let’s take a closer look at how to configure its absence on iPhone.

We remove vibration signals on old models

We recommend starting the disconnection procedure on the iPhone 6s from the desktop of the gadget:

How to Change ringtone iPhone 7/7

  • Select the “Settings” app,
  • Enter the “Sounds” section,
  • Deactivate the switches in the “During a call” and “In silent mode” lines. The absence of a bright green tone in the window will indicate that vibro does not work on iPhone 5s, 6 and more rare gadgets.
  • Confirm the correction by pressing the Home button.

Troubleshooting with AssistiveTouch

Go to Settings → General → Accessibility.

Go to the AssistiveTouch section and activate this function through the corresponding toggle switch. A dot will appear on the screen with additional menus, which can be positioned anywhere on the display.

Tap on the AssistiveTouch menu and select “Apparatus”.

On the right there should be a “Mute” icon with a crossed-out bell (if not, then put this function in this position), and on the left, tap on “Louder” to increase the ringer volume.

Disable AssistiveTouch as unnecessary.

Check the volume switch

Despite the simplicity of this method, it is he who, in a huge number of cases, becomes a lifesaver for iPhone users. Of course, more often for new owners of Apple smartphones who have not yet figured out the capabilities of their device.

The ringtone may not play on the iPhone due to the fact that the smartphone is switched to silent mode with the volume switch, which is located on the left side of the case. Make sure your iPhone is not in silent mode by flipping the switch if necessary.

iPhone needs restart

If the volume switch is in the correct position, but the ringtone still does not sound, your device may need to be rebooted. A hard restart will fix software bugs that could have caused the ringtone to disappear. We talked about how to restart iPhone (4 ways) in this article.

No sound on incoming call on iPhone. Do Not Disturb is activated

If the ringtone on your iPhone stops ringing, check to see if Do Not Disturb is turned on. Users often mistakenly activate this mode without noticing it. If you see a crescent-shaped icon at the top of the screen, it means that you have Do Not Disturb mode turned on, which turns off all sound notifications.

Solving this problem is as easy as shelling pears. Swipe up from the bottom of the screen, open Control Center and turn off the mode. The beep should now appear again.

The issue is related to a problem with the iPhone hardware, such as the speaker

The loss of sound can be caused by a breakdown of some component in the device itself.

For the sake of experiment, try resetting the settings (Settings → General → Reset → Erase content and settings), and if this procedure did not help, then you can completely eliminate the software error by restoring the iPhone via iTunes with the subsequent setting “Like new”.

If this did not help to return the sound with an incoming call, then a trip to the service center cannot be avoided. We recommend using the services of only official Apple service centers, of course, if there is one in your city or country.

There are several ways to put a ringtone on an iPhone. There are a number of useful software and utilities for this, a similar function is available on the phone itself. The user can install a new melody in just a few minutes, but there are a number of features to consider. Let’s take a closer look at the procedure and possible problems with synchronizing devices and transferring music from PC to smartphone.

What to do if there is no sound (disappeared) of an incoming call on iPhone

Despite the fact that the iPhone is a very reliable thing, sometimes users are faced with a sudden disappearance of the ringtone when making a call. There is an incoming call, but there is no beep, what should I do? Below we will tell you how you can solve this problem.

Conversion and WALTR 2

If you do not want to install a melody via iTunes, you can use third-party software. WALTR 2. The official website is available to download paid and free software versions. With its help it is possible to download files of any suitable format with any length to the iPhone. When transferring, the selected file is converted automatically, which is much more convenient than in iTunes.

To transfer a track via WALTR, use the instructions:

  • Immediately after installation, the program will search for available devices via Wi-Fi, so this option must be enabled on the phone.
  • After the software finds the desired device, it will reflect it on its interface. Click on the “Drop file here” button
  • After that, it is enough to find any track in the computer folder and drag it with the mouse to the main program window. After the transfer is complete, the melody will appear on the phone and it can be set to the ringtone.
  • It should be remembered that it is best to pre-cut the track to 15-30 seconds of duration so that it will be reflected in the list of ringtones on the phone. Otherwise, it will be reflected in the explorer, but not recognized by the smartphone as a new call.

At the moment, only the English version of the program is available, but software management does not cause any particular problems even for those who do not know the language.

The program supports both Mac and Windows operating systems, so you can import tracks from non-Apple equipment.

Conversion and WALTR 2

If you do not want to install a melody via iTunes, you can use third-party software. WALTR 2. The official website is available to download paid and free software versions. With its help, it is possible to download files of any suitable format with any length to the iPhone. When transferring, the selected file is converted automatically, which is much more convenient than in iTunes.

To transfer a track via WALTR, use the instructions:

  • Immediately after installation, the program will search for available devices via Wi-Fi, so this option must be enabled on the phone.
  • After the software finds the desired device, it will reflect it on its interface. Click on the “Drop file here” button
  • After that, it is enough to find any track in the computer folder and drag it with the mouse to the main program window. After the transfer is completed, the melody will appear on the phone and it can be set to the ringtone.
  • It should be remembered that it is best to pre-cut the track to 15-30 seconds of duration so that it will be reflected in the list of ringtones on the phone. Otherwise, it will be reflected in the explorer, but not recognized by the smartphone as a new call.
Read more:  How to Quickly Delete Contacts from iPhone

At the moment, only the English version of the program is available, but software management does not cause any particular problems even for those who do not know the language.

The program supports both Mac and Windows operating systems, so you can import tracks from non-Apple equipment.

Turn off Do Not Disturb mode

Another rather simple way to solve the problem is to turn off the “Do not disturb” mode. Many users activate it accidentally, or set the wrong settings to turn it on automatically. Do not disturb mode on iPhone is indicated by a crescent moon icon in the status bar.

It is very easy to turn off Do Not Disturb mode. Swipe up from the very bottom of the screen to go to Control Center and turn off the mode by clicking on the corresponding button (shown in the screenshot). If the problem was precisely in the “Do not disturb” mode, then the ringtone on the iPhone will play again.

Perform a forced reboot

Also, a forced restart, which clears various software errors, can help get ringtone playback back on iPhone. To execute it, you need to simultaneously hold down the Power and Home buttons (the volume down button on the iPhone 7/7 Plus) and hold them until the Apple logo appears on the screen. After turning on the device, you need to check if the ringtone is working or not.

Check the volume switch

Despite the simplicity of this method, it is he who, in a huge number of cases, becomes a lifesaver for iPhone users. Of course, more often for new owners of Apple smartphones who have not yet figured out the capabilities of their device.

The ringtone may not play on the iPhone due to the fact that the smartphone is switched to silent mode with the volume switch, which is located on the left side of the case. Make sure your iPhone is not in silent mode by flipping the switch if necessary.

Troubleshooting with AssistiveTouch

Go to Settings → General → Accessibility.

Go to the AssistiveTouch section and activate this function through the corresponding toggle switch. A dot will appear on the screen with additional menus, which can be positioned anywhere on the display.

Tap on the AssistiveTouch menu and select “Apparatus”.

On the right there should be a “Mute” icon with a crossed-out bell (if not, then put this function in this position), and on the left, tap on “Louder” to increase the ringer volume.

Disable AssistiveTouch as unnecessary.

Check your sound settings

It is possible that problems with the ringtone arose due to incorrect sound settings. Open “Settings”, select “Sounds” and set the appropriate ringtone and notification volume for you. Here you can also enable “Change with buttons”, which will allow you to adjust the volume of the ringtone using the volume button on the left side of the iPhone.

How to put music on a call via iTunes

You can put a song on an iPhone call through iTunes. To do this, you must first install the software on your computer and synchronize the devices using Apple ID.

  • Open the program and go to the “File” menu. Select the column “Add folder to the library”.
  • You will be taken to the computer explorer, where you need to select a previously prepared folder with music downloaded from the Internet. All of it must be in m4r format, otherwise the iPhone will not recognize the tracks.
  • Load the folder into the program library and select the desired track. After that open the “Details” of the file.
  • Next, go to the “Parameters” subsection. Here you need to select the start and end time of the track. the segment of the melody that will be set to the call. You can leave the original values ​​if necessary (from beginning to end).
  • Click “Ok” and close the window. Then return to the list of tracks and right-click on the track already “cut” under the ringtone.
  • Click “Create ACC version” and wait for the end of the conversion. This is the format that iPhone ringtones should have.
  • A copy of the track will appear in the general list of songs. Click on it and choose “Show in Explorer”. From the folder that opens, drag the track to the iTunes window.

You can change the ringtone in this way on all modern models of the brand. 5s, 6s, 6, 7, 8.

After all the above steps, you need to connect your phone to your computer and wait for synchronization with the program. The created ringtones will become available in the “Sounds” section of the phone settings menu.

How to Fix iPhone Not Ringing for Incoming Call (100% Works)

When installing a ringtone through iTunes, you do not need to buy a track, it is absolutely free, but it may take some time.

If file extensions are hidden on the computer, then it will not work to install the ringtone in this way. You will need to disable the option in advance.

iPhone needs restart

If the volume switch is in the correct position, but the ringtone still does not sound, your device may need to be rebooted. A hard restart will fix software bugs that could have caused the ringtone to disappear. We talked about how to restart iPhone (4 ways) in this article.