How To Turn On A Usb Flash Drive On A Samsung Tv

Samsung

How to turn on bluetooth on Samsung and LG TV

Modern televisions are not just TV sets. These are entertainment media centers that allow you to surf the Internet, play various games, connect various media devices. In the latter case, the operation is performed using a Bluetooth connection that pairs the TV with the desired device. Many users don’t know how to activate this option. In this article, we will analyze how to enable bluetooth on LG and Samsung Smart TVs. And also we will describe the steps that we need for this.

  • What you need to know about turning on bluetooth on Smart TV?
  • How to turn on Bluetooth on Samsung TV
  • How to activate the engineering menu on Samsung TV
  • Enabling Bluetooth on your LG TV

How to turn on Bluetooth on Samsung TV

To connect the desired audio device via bluetooth on your Samsung TV, you need to do the following:

  1. Go to the settings menu of your Samsung TV;
  2. In the menu, select the “Sound” section and click on “OK”;

This procedure is generally similar for most Samsung Smart TVs, differing only in details.

How to activate the engineering menu on Samsung TV

As we wrote above, Bluetooth connectivity may be blocked for devices from other manufacturers. To resolve this issue, it will be necessary to activate the engineering menu in Samsung TV, and configure it to activate bluetooth and support third-party devices.

To activate the engineering menu on TV, do not turn off your TV. Leave it on, then quickly press the following buttons on the remote:

Mute 1 1 9 (OK / Select)

The “OK / Select” button is located in the center of the “Left”, “Right”, “Up”, “Down” buttons. After dialing this sequence, a secret menu will open, which will allow you to turn on / off the desired bluetooth mode (for example, “BT Audio ON”).

What you need to know about turning on bluetooth on Smart TV?

As you know, not all Samsung and LG TVs support bluetooth. Therefore, it will not be possible to turn on bluetooth on all TVs. Usually, this requires the presence of a Smart TV and a hardware module responsible for the operation of the specified technology.

You can find out if your TV supports Bluetooth connection by examining the specifications of your TV. To do this, type in the full model name of your TV into a search engine, and study the technical characteristics of the device. Specialized web resources like fullspecs.Net can also help.

If you have Samsung, Sony, LG, Philips Smart TV brands with Bluetooth support, then it is likely that your device will not allow you to connect via Bluetooth from other manufacturers. For example, many Samsung models only allow you to connect soundbars from the same manufacturer. And do not interface with other brands of audio devices.

Nevertheless, in many TVs, you can activate a special system menu that allows you to unlock Bluetooth functions and connect the desired device to your TV. Below we give options for a set of buttons on the remote, allowing you to access the specified menu.

Let’s figure out how to enable Bluetooth on your home TV from Samsung and LG.

Enabling Bluetooth on your LG TV

As you know, LG Smart TVs use their own operating system “WebOS”, which previously only supported branded sound devices from LG. Starting with the third version of webOS, you can connect devices from other manufacturers to your TV.

You can activate Bluetooth module on LG Smart TV as follows:

  1. Press the “Menu” or “Setting s” button on your TV remote control;
  2. In the menu that opens, select the “Sound” section;
  3. Check the box next to “LG Sound Sync / Bluetooth”;

If the full work with Bluetooth on your TV is blocked, we recommend using the capabilities of the engineering menu.

To call it, press and hold the OK buttons on the remote control, as well as on the TV panel for a few seconds, and the service menu will appear on the screen.

For some TV models, you may need to press the “Menu” buttons on the remote control and on the TV panel at the same time for a few seconds to access the service menu. On some TV models, both methods work and open different service menus.

If a password is requested in the service menu, enter 0000 (four zeros). If 0000 doesn’t work, try 7777 or 0413 or 8741 or 8743 or 8878.

Then you can make changes to the desired settings. Press the button on the remote control to save the changes.

Instruction

In the following, we will show how to enable the engineering menu and enable the bluetooth option on a Samsung or LG TV.

Click here to learn about auto tuning on an F-series TV

Connect the wire from the antenna to the AIR / CABLE connector.

How To Turn On A Usb Flash Drive On A Samsung Tv

Select source: press Source button, select TV.

Enter the TV menu: depending on the remote, press either the Menu button or the button and select Menu on the TV screen.

Select Auto Tuning, then Auto Tuning again.

The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.

In the Antenna item, select:
Antenna (if using a common house or indoor antenna)

Or Cable (if using cable TV).

Select channel type. Digital.

If you are tuning cable TV, set the Search Mode to Full.

Select Scan to start searching for channels.

Wait for the auto-tuning to complete.

When auto-tuning is finished, select Close.

To exit the menu, press the Return button on the remote.

Click here to learn about auto tuning on an E-series TV

Connect the wire from the antenna to the AIR / CABLE connector.

Select source: press Source button, select TV.

Enter the TV menu: press the Menu button on the TV remote.

Make sure Aerial is set to Aerial. If selected differently, select Antenna.

Select Auto Tuning, then Auto Tuning again.

The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.

In the Antenna item, select:
Antenna (if using a communal or indoor antenna) and Digital ,

Or Cable (if using cable TV) and Digital.

Click Next.

If you are setting up cable TV, set the Search Mode to Full and click Next.

Wait for the auto-tuning to complete.

When auto tuning is finished, select OK.

To exit the menu, press the Return button on the remote.

1. How to find and configure channels

To make the TV show channels, run auto tuning. Auto Tuning helps you quickly find and arrange channels in order. Below you will find instructions for the various Samsung TV series.

Click here for Auto Tuning on H Series TV

Connect the wire from the antenna to the AIR / CABLE connector.

Select source: press Source button, select TV.

Enter the TV menu: depending on the remote, press either the Menu button or the Keypad button and select Menu on the TV screen.

Select Auto Tuning, then Auto Tuning again.

The TV can receive free (terrestrial) channels from a common house (it stands on the roof and is used by the whole house), an indoor antenna (a portable antenna, usually looks like two metal rods) or from a cable operator (a common house antenna or a separate wire can be used). If you do not know what kind of television you have, contact the management house company.

In the Antenna item, select:
Antenna (if using a common house or indoor antenna)

Or Cable (if using cable TV).

Select channel type. Digital.

If you are tuning cable TV, set the Search Mode to Full.

Select Scan to start searching for channels.

Wait for the auto-tuning to complete.

When auto-tuning is finished, select Close.

To exit the menu, press the Return button on the remote.

3. If the TV does not support the DVB-T2 standard

You will not be able to watch digital channels. Solving the problem is simple. Buy a DVB-T2 set-top box. Its average price is 1000 rubles at the beginning of 2020.

2. If the TV does not find channels

If the TV did not find any channels, the problem is in the signal. Check:

  • Whether the cable is damaged and is firmly connected to the TV;
  • Is the antenna correctly installed and tuned;
  • Is the correct signal source selected: cable or antenna. Try to find channels by changing the source type in step # 8 from Antenna to Cable or vice versa;
  • Does the TV support the DVB-T2 standard. Digital TV on the territory of the Russian Federation works only in this standard.
    The DVB-T2 standard is supported by some Samsung E-series TVs (for which the model code ends with 7, for example, UE40ES6547) and all Samsung TVs from the F-series (2013 and later).

If you can’t set it up yourself, contact support.

How to update software on a Samsung Smart TV via the Internet and a USB flash drive

There was a question “How to update Samsung Smart TV?” The article will help you understand the problem and find solutions. The software is installed for different models of TV devices. Smart TVs are equipped with the Internet. They do not need the help of third-party equipment. Because of this, you need to constantly update the parameters and download new firmware.

Application update instructions

Set new parameters throughout the STB. This will help you update apps automatically. Also install a system that will independently improve the firmware.

Do I need to update the firmware on Samsung Smart TV?

Software installation is required for any TV. It provides normal operation without crashes and glitches. There are several methods to download new versions. The first is when using additional storage. The second. Using the Internet and a browser.

The developers recommend updating the STB’s firmware. Otherwise, permanent failures are possible. After a while, all functionality will stop working. The device will be constantly buggy and freeze. You won’t be able to watch the series either. Alas, users do not attach importance to this process. In fact, there are no difficulties here. To complete it you need a little free time, external media and access to the free Internet. Updates provide an opportunity to fix problems that were present in earlier versions.

Which TVs can be upgraded?

First, determine if the technician needs new software. Find out information on the official website of the Samsung company. Another option is to look at the sticker on your TV. It is located on the back panel. It says the model number. These data must be entered in a separate field on the electronic page. Use the data to understand if a vehicle is subject to upgrade.

How to update Samsung Smart TV over the Internet?

This method is relevant for devices with built-in Smart TV. Other models require the use of external media or a USB stick. The steps are pretty simple:

  1. We connect the TV device to the Internet. Checking the signal quality. Note! Bad WI-FI will not handle the load during updates.
  2. Using the control panel, launch the device menu and go to the “Technical support” folder.
  3. In the drop-down list we find the item “Software update”.
  4. Click on the “Update now” button and move on.
  5. The TV will start adjusting the new settings. In case of an error, the screen will display a signal.
  6. We confirm the operation and click on the “OK” button. The device will reboot and turn on again.

This method is free and simple enough. There is only one drawback. Power may be cut off during the update. In such a situation, the settings will fail. You will not be able to fix the device yourself. We’ll have to resort to the help of specialists. Despite this, the system needs to be constantly improved. Introducing new settings will help you sync multiple devices together with your TV. Now, spend time on social networks without opening from watching a movie or TV series.

What to do if the update is not available on Samsung Smart TV?

If you have any questions or complaints. Let us know

Method 2

You can start the operation of the USB drive using a set-top box for watching digital TV. Such receivers are equipped with all the necessary connectors, including USB. The device should be connected via HDMI, but if the TV is a very old release, then you need to use the CRT inputs (tulips).

After connecting all the devices, insert the USB flash drive, select the required for viewing in the MENU tab, press the PLAY button.

Instructions

Diagram of connecting the drive to the TV directly:

  1. Download the desired, or piece of music.
  2. On the side of the TV, you need to find a USB connector (sometimes the connector is on the back panel), insert a flash drive with the uploaded content into it.
  3. Turn on the plasma panel, a menu will appear on the screen, where all the materials contained on the media are displayed.
  4. The user must select the movie or program of interest for viewing from a flash drive on the TV, press the “play” key.
  5. Then the content will start playing.

This is the basic method for connecting a USB stick to a TV. Suitable for most modern models of Samsung, LG.

Other connection methods

How to connect a flash drive to a TV that does not have a connector. Usually these are older models, where the function of viewing from external devices is not yet provided. Therefore, many are interested in how to connect a USB flash drive to an old TV. This can be done with DVD and TV tuner, ANDROID set-top box.

Ways to connect a flash drive to a TV

How to connect a USB flash drive to a TV to watch a movie downloaded on the Internet, vacation photos, or listen to musical compositions, this question is often asked by the owners of modern models.

Almost all new panels are equipped with a USB socket for connecting a flash drive. If there is no connector on the TV, then this problem is easily solved by special devices. You should also be aware that you can only upload movies or other materials to the media from certain portals and in formats supported by the device.

Method 1

All players are equipped with connectors for flash drives. Therefore, using a player connected to the TV, you can view information from the drive.

To do this, you need to install the flash drive in the player, turn on all devices, select the desired movie in the menu and start watching.

Method 3

Viewing from the media is carried out using the ANDROID prefix. The device is equipped with the same connectors as the digital tuner, so the connection is made in the same way. There are different models on the market, you can choose a set-top box at a fairly economical cost.

All methods are also suitable for all well-known brands of TV LG, Samsung, Sony.