How to turn off iPhone XS

fourHard reset to disable iPhone safe mode

If your iPhone is frozen in Safe Mode and unresponsive, you can completely erase iPhone data to make it brand new. Here we bring you the powerful iOS Data Eraser, iPhone Eraser to help you get your job done.

iPhone Eraser is one professional utility that can help you remove all iOS files and settings including photos, videos, messages, password, call logs and more on iPhone, iPad and iPod touch. All junk files and faulty extensions on iPhone will be scanned and removed for free.

Step 1Click the download button above to quickly install and run iPhone Eraser on your computer. Connect your iPhone to it with a USB cable. It will recognize the iPhone automatically.

Step 2iPhone Eraser provides 3 levels, Low, Medium and High erasing. You can choose your preferred option based on your needs.

Step 2Click Start to completely erase all iOS data and settings. After that, your iPhone will exit Safe Mode and become new and normal.

iPhone XS / XS Max: How to Shut Off or Turn Off (3 Ways)

turn, iphone

2Restart your computer to disable iPhone Safe Mode

You can hold down the Power and Home buttons at the same time until your iOS device shuts down and restarts.

How to turn Safe Mode on or off on iPhone

Disable Safe Mode on iPhone

This post will mainly talk about iPhone Safe Mode.In fact, for one reason or another, you will need to enable or disable Safe Mode on iPhone XS / XR / X / 8 / SE / 7/6/5 / 4. This post will give provide you with valuable information about iPhone Safe Mode. Also, you will learn how to turn Safe Mode on and off on iPhone.

How to Disable Safe Mode on iPhone XS / XR / X / 8 / SE / 7/6/5

With the above method, you can easily boot iPhone in Safe Mode. But how to disable iPhone in Safe Mode can still be confusing. Sometimes, your iPhone may freeze in Safe Mode. This Part Will Show Some Effective Ways To Exit iPhone Safe Mode.

oneRestart to Exit iPhone Safe Mode.

Reboot. this is the easiest way to turn off iPhone Safe Mode. Click Restart when you receive the Safe Mode pop-up message. This operation will return your iPhone to normal.

How to put / boot iPhone into Safe Mode

You can manually put iPhone into Safe Mode when it starts to malfunction. This way, you can easily uninstall the last installed tweak to get your iOS device back to normal. This part will show you boot iPhone in Safe Mode in detail.

Step 1Turn off your iPhone in the usual way.

Step 2Wait a few seconds and then turn on the iPhone.

Step 3When your iPhone lights up, keep pressing the Volume Down button until the Apple logo appears on the screen.

Your iPhone will boot into Safe Mode. You can now uninstall any tweak or theme that is causing your iPhone to malfunction.

3Hard restart to disable iPhone safe mode

Step 1Hold down the Power and Home buttons until the iPhone shuts down completely and restarts.

Step 2Release the buttons and wait for the start screen to appear. Here you can ignore “Slide to Unlock”.

Read more:  Possible Unlock iPhone 4s

What is iPhone Safe Mode

You May Know iPhone Recovery Mode and iPhone DFU Mode and What is “Safe Mode” on iPhone?

IPhone Safe Mode is one way to run iOS on a jailbroken iPhone. Just like Safe Mode in a computer’s operating system, which helps you remove faulty processes that can cause operating systems to malfunction. IPhone Safe Mode lets you remove any problematic or faulty extension that could crash a jailbroken iPhone.

You will feel familiar with it if you have jailbroken your iPhone. IPhone Safe Mode can help you troubleshoot your iPhone or remove the underlays that are causing such problems. In short, iPhone will boot in safe mode while jailbreak extension crashes iOS.

How to turn off iPhone if sensor is not working

When a reboot is not needed and you only need to turn off the smartphone, the aLGorithm of actions changes somewhat. The shutdown procedure is similar to the one discussed, only you need to hold down the lock and Home buttons for 4-5 seconds until the screen turns off and then immediately release it, without waiting for the logo to appear. In this case, the phone will not be switched on again (rebooted). To restart the smartphone after a hard shutdown, standard actions will be required. hold the power button for two to three seconds.

How to turn off iPhone if the screen is not working

If the touch screen stops responding to touches, this is not a reason to rush to the workshop. just try restarting your smartphone first. How to turn off the iPhone if the screen does not work, we will tell you in this article.

The first thing that is advised to do in case of any malfunction or freeze of the smartphone is to restart the device. However, the non-functional touchscreen makes the standard reboot procedure impossible. Below is a detailed description of how to turn off your iPhone if it freezes and the sensor does not work.

How to restart iPhone if the screen is not responding to touches

In a standard situation, to reboot after pressing the lock button, you need to confirm the action by swiping your finger across the screen. But you can reboot your smartphone even if the sensor does not respond. This procedure is called “Hard Reset” or “Hard Reset”. To do this, you must simultaneously press the lock and “Home” buttons on the phone. You need to hold them for a few seconds (about 10) until the screen turns off and the Apple logo appears on the display. This means that the smartphone has rebooted.

Potential consequences of rebooting without using a sensor

The “hard reboot” procedure is marked in the instructions as a last resort for cases when other, more secure, ways to turn off or restore the smartphone to work do not help. In fact, if you do not abuse the “Hard Reset” and do not use this method all the time, then there will be no negative consequences for the smartphone. However, with frequent use, there is a possibility of losing information that is stored in the smartphone’s memory. Hard reboots can crash or completely damage the iPhone memory module. The number of hard reboots and module failure are not directly related, but the probability increases over time. Thus, do not neglect regular data backups to iCloud and try to use “Hard Reset” as little as possible.

Breakdown reasons

Unstable operation or complete failure of the touch screen is often associated with the following reasons:

  • Mechanical impact (due to impact or falling of the phone).
  • Ingress of moisture into the case (moisture protection for Apple smartphones does not guarantee complete impermeability).
  • Overheating of the smartphone.
  • IOS software crash or freeze.
  • Poor quality protective glass or bumper.

And if it is better to contact the service center with mechanical problems, then in other cases it is worth trying to restart the iPhone. In the overwhelming majority of cases, this will be enough to restore performance. How to turn off the iPhone if the screen does not work, we will tell you in the following sections.

If all else fails

If the described methods did not work or you do not want to perform a hard reboot, then try other options. “Hard Reset” is a quick and easy way, but not the only one. Two more methods on how to turn off the iPhone if the sensor does not work are described below.

The safest option would be banal waiting for the battery to drain. The iPhone will turn itself off and to turn it on again, you just need to connect the charger to it. This method is the safest for the phone and does not create additional risks.

Read more:  How to find out the Screen Time passcode on iPhone

Another fairly harmless and uncomplicated option would be to restore your smartphone through the iTunes media service. You will need a computer with the installed program and Internet access. Connect iPhone to PC with original USB cable and wait for iTunes to find and detect your device. If the identification stage has passed successfully, find the “Restore iPhone.” button on the “Overview” tab and confirm the action.

In the process of updating and restoring factory settings, the program will automatically restart the phone. This iTunes function will delete all media files and other data from the device while it is running. Therefore, before starting the restore, be sure to make a backup and save it to iCloud.

Video instruction to hard reset iPhone:

How to turn off iPhone X S Max

The main shutdown method is still using the key on the side of the smartphone. but only in combination with any of the volume control buttons.

They must be clamped at the same time and held until the operating system displays a special slider.

Please note that if you used an increase in the volume and did not hold down the keys, but only quickly pressed them, then instead of the shutdown procedure, you will get a screenshot.

When the slider appears on the display, drag it to turn off the device.

Such a mechanism looks not the easiest, but almost completely eliminates the likelihood of spontaneous shutdown in your .

But if you prefer not to wear out the keys unnecessarily, then take a closer look at the software method to turn off the iPhone X Max. It appeared in the 11th version of iOS and works well on the tenth iPhone. The sequence of actions in this case will be as follows:

  • Open the settings section and go to the main parameters of the device.
  • At the bottom of the list, find a sub-item with the self-explanatory name “Turn off” Click on it.

After that, the same slider will appear as if you had used the previous option with a keyboard shortcut. Drag it to the other side to turn off the device.

Finally, there is another way how to turn off the iPhone XS Max. activate the AssistiveTouch system function, which will place a special button on the screen for quick access to various actions.

The option is turned on in the same basic settings, you just need to select universal access and then AssistiveTouch.

Or you can simply ask Siri to turn on AssistiveTouch.

The button can be moved to any edge of the display so that it does not interfere with normal operation of the device.

By default, it has a sub-item “Device” (or Device). click on it, then touch the lock screen and hold your finger. The system will display the standard disable slider.

How to turn off iPhone X S Max

In new products from Apple, such changes often appear that an unprepared user can be confused. And we are talking about even the most trivial operations like turning off the device. Yes, yes, when switching to a fresh model, it is better to familiarize yourself with the control methods in advance. Otherwise, you will have to urgently look for advice on how to turn off the iPhone X S Max.

The roots of the problem lie in the fact that the iPhone X S Max does not have such an option at all how to turn it off with the side button. If you use only this control, you can lock the device, wake up the smartphone, launch the voice assistant, switch to Apple Pay. in general, do anything except the shutdown itself. No, of course, you can wait until the device completely discharges the battery, but the process can drag on. So it’s better to study the available methods, choose the best one for yourself and fully manage your smartphone.

How to Force Restart iPhone XS Max

For a forced reboot, you will need to perform a “dance” on the control keys:

  • Press and immediately release the volume up;
  • Press and immediately release the volume decrease;
  • Hold and hold the button on the side until the logo appears.

After that, the device will start in normal mode.

Quick reboot

If the iPhone starts to behave strangely, for no reason to think or just slow down, you can simply reboot the device. You can do this in a similar way.

Instead of the Screen Lock button in the AssistiveTouch menu, add the Restart option.

iPhone XS/ XS Max: How to Turn Off / Power Down (2 Ways)

Now, to restart, you need to press the AssistiveTouch virtual key, select the Restart item and confirm the action.

Read more:  iPhone says that headphones are connected

Conveniently enable / disable AssistiveTouch

Turning off and restarting the device is not needed every day, but the virtual button will regularly appear on the screen. You can configure its quick hiding and display.

Go to Settings. General. Accessibility. Keyboard shortcut and select AssistiveTouch. After that, triple pressing the Home button will toggle the AssistiveTouch menu on and off.

And how to turn on the turned off iPhone now

Without the Power button, you will have to turn on the iPhone by supplying power to the device. It is enough to connect it to a computer, charger or PowerBank and the device will turn on instantly.

Remember this before turning off your iPhone with a broken power button.

thank re: Store for useful and interesting information.

Shutdown

Without a physical button, you will have to use its virtual counterpart. To do this, you need to enable AssistiveTouch.

We follow the path Settings. General. Accessibility. AssistiveTouch and activate the main switch.

Opening the Top Level Menu section.

Select any unnecessary button from the existing ones or add an additional icon to the menu.

Selecting the Screen Lock option.

Now, in the AssistiveTouch menu that appears when you click on the virtual button, you can see the screen lock button. Pressing will turn off the display, and holding it will call the iPhone mute slider we need.

How to turn iPhone off and on when the power button isn’t working

One of the common breakdowns in the iPhone of different models is the failure of the on / off button of the device. In this case, repairs are inexpensive, but not everyone can stay for several days without their favorite gadget.

This is not necessary, because there is a way to use the device even with a broken button.

In the first test version of iOS 11, the developers added a special menu item along the path Settings. General. Disable. It brings up the menu to turn off the device without pressing the power button.

There are still several months before the official release of the firmware, and you can use a device with a broken button right now.

Artyom Surovtsev

I love technology and everything connected with it. I believe that the greatest discoveries of humanity are yet to come!

How to turn off the flashlight on this phone?

How to turn on the flashlight on a Galaxy with Android 10, 9, 8, 7, 6

  • Swipe the screen from top to bottom two times to fully unfold the “shutter”.
  • Find the Flashlight icon. To do this, scroll through the icons with your finger from right to left.
  • Click on the icon to enable or disable the flashlight.

How to turn off the flashlight on your Huawei phone?

The flashlight will turn on. Tap the screen to turn off the flashlight. To turn it back on, tap the screen again. Swipe left on the smartwatch screen to turn off the flashlight function.

How to turn on the flashlight on iPhone 11?

Turn on the flashlight on your iPhone from the control center

  • In the control center, press the flashlight button and the flash on your iPhone will light up instantly.
  • To turn off the flashlight, press the flashlight button in the control center again.
  • Fire up the flashlight on your iPhone using Siri.

How to turn off the flash during a call?

To turn off the flash blinking on a call: Open the application Deactivate the slider next to Incoming Call.
.
How to set up flash when ringing on your phone

  • Download the one that you like, for example, an application with a Russian interface
  • Launch it and in the “Flash alert” section activate the items “Incoming calls”

How to turn off flash on iPhone?

Select the “Basic” section, go to “Accessibility”.

  • Scroll down to Flash Alerts.
  • Activate this function or disable it as unnecessary.

How to put a flashlight on an iPhone?

How to turn on flash on incoming calls and notifications on iPhone with iOS 5. iOS 12

  • Go to Settings and select the General section.
  • Scroll down and enter the Accessibility menu.
  • Select the Hearing section and activate the Flash alerts switch.

How to turn off the lights on iPhone?

Open the settings and go to the “General” section. Select Accessibility. In the “Hearing” section, select “Flash alerts”. If you need to completely disable the operation of this function, move the slider next to the “Warning flash” parameter to the off position.