How to Turn Off iPhone 11 Pro Max

What to do if iPad charges but won’t turn on?

Clogged or broken charger connector

If your iPad won’t charge (and therefore won’t turn on), it’s possible that the charging slot is clogged or broken. Proceed as follows: blow out dust from the connector; clean it with a special paper clip

How to turn off iPhone x if the screen does not work?

How to Force Restart iPhone X in Force Mode

  • Press and release the volume up key quickly;
  • Press and release the volume down key quickly;
  • Press and hold the side button until the smartphone turns off.

How to Turn Off iPhone with Broken Screen?

Therefore, the procedure is as follows:

  • On your device, hold down the Power key and wait a few seconds (3-5 seconds);
  • If your screen is partially broken, but the sensor works, just pull the slider in the right direction and the phone turns off;

How to Restart iPhone 10 If Screen Doesn’t Work?

algorithm to reload it:

  • Hold and quickly release the volume up button.
  • Hold and quickly release the volume down button again.
  • Hold down the power / lock button (Power key). Hold it until the iPhone screen darkens.

How to turn off iPad if sensor does not work?

How to turn off iPhone without sensor? You just need to hold down the lock and home keys at the same time, hold them for 4-5 seconds. Then the device turns off without confirmation. After that, you can simply turn on.

What to do if iPad won’t turn off?

If iPad does not turn off and freezes, you can repair the device yourself.
Basic Ways to Solve iPad Freeze Problem

  • hold and hold simultaneously the buttons “Home”, “Power”
  • wait for the tablet to start (the start-up logo appears)
  • check the device is working

How to restart iPad if the screen does not work?

To completely restart your iPad, follow these steps:

  • unlock device
  • hold down the Power and Home button for 10 seconds
  • release the buttons at the same time after the logo appears

What to do if an apple is on on an iPhone and won’t turn on?

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds. Then release the Power button and continue holding the Home button until iTunes detects the device in recovery mode (about 10 seconds). Step 4.

What to do if iPad has a black screen?

If the screen is dark or unresponsive

You can force the device to restart even if the screen is dark or does not respond to button presses. Follow the steps below. On iPad models with Face ID: Press and quickly release the Volume Up button. Press and quickly release the volume down button.

Hard (forced) reboot of the device.

The first thing to try whenever your iPhone crashes is to reboot your phone. If you cannot reboot the iPhone in the standard way, then you should use the special keyboard shortcuts of the device to force the phone to reboot. The methods for hard resetting iPhone differ slightly depending on the model. Let’s consider each of them.

    To restart iPhone 11, X, XS, XR, 8, and 8 Plus:

Quickly press and release the volume up button.

Repeat this procedure for the volume down button.

Hold the side button until the Apple logo appears on the phone screen.

To restart iPhone 7:

Press the side button and volume down button at the same time.

Hold the buttons until the Apple logo appears on the phone screen.

To restart iPhone 6s and 6:

Press the side button and the Home button at the same time.

Read more:  What Happens If Two Headphones Are Connected To The Iphone At The Same Time (Lightning Earpods And Earpods From 3, 5

Hold the buttons until the Apple logo appears on the phone screen.

To restart your iPhone SE, 5s and earlier:

Press the top button and the Home button at the same time.

Hold the buttons until the Apple logo appears on the phone screen.

If restarting the device did not help, the “apple” is still on on the iPhone, and it does not turn on, you can try updating the operating system of the device or restoring it to factory settings using iTunes, which is available to every user of “apple” products.

Update or Restore iPhone 11 via iTunes.

Using this method may delete data on your phone, so back up your iPhone if possible. If this is not possible at the moment, after restoring your phone, you can use only the last created backup, new files will be irretrievably lost. Before starting work, make sure that you have the latest version of the program installed. To update or restore iPhone using iTunes, follow the steps below.

Start iTunes on your computer. Connect USB cable to PC, but don’t connect iPhone itself yet.

Put your iPhone into recovery mode. The methods will vary slightly depending on the model. Let’s consider each of them.

IPhone 8 or later: Hold down the side button and one of the volume buttons and wait for the Power off slider to appear on the screen. Move the slider to turn off your phone. While pressing the side button, connect your iPhone to the pre-connected USB cable. Do not release the side button until the recovery mode screen lights up.

IPhone 7 and 7 Plus: Hold the side / top button of the device and wait until the Power Off slider appears. Move the slider to turn off your phone. While holding down the volume down button, connect the iPhone to the pre-connected USB cable. Do not release the volume down button until the recovery mode screen lights up.

IPhone 6s or earlier: Hold the side / top button and wait for the Power Off slider to appear. Move the slider to turn off your phone. While holding down the Home button, connect your iPhone to the pre-connected USB cable. Do not release the Home button until the recovery mode screen lights up.

After successfully putting iPhone into recovery mode, wait until the device displays the offer to restore or update iPhone. Select the Update option to reinstall the operating system and save your phone data. If this option did not work, repeat the previous steps, and then select the “Restore” option. In this case, files and settings will be erased, and the iPhone itself after restarting will need to be restored from a previously created backup or configured as a new one.

How to Turn Off iPhone 11 Pro Max

If the above methods failed to help, and you do not know what to do if the iPhone does not turn on, but the “apple” hangs, then we offer you the easiest and most effective way to solve this problem.

Why iPhone 11 Won’t Turn On Apple Burns?

First, let’s analyze the possible reasons why the iPhone 11 does not turn on, and the “apple” is on the screen.

If the iPhone does not turn on, and at the same time the “apple” is on the screen and goes out, then, perhaps, the reason lies in the lack of battery power. To check this version, connect the phone to the charger and after a while try to turn on the iPhone again.

There is a power problem

If during the connection of the device to the charger there was a power outage, a power surge, then this can cause device errors and cause the iPhone to freeze on the “apple”.

Damaged power button

Sometimes during an “unauthorized” disassembly of the iPhone (by yourself, and not in a service center), some parts break, in particular, the phone’s power button. Then the user may notice that the iPhone restarts on the “apple” or the “apple” is lit on the iPhone, but it does not turn on. In this case, it is better to contact the service center for diagnostics and replacement of the part.

Damaged motherboard

In this case, the device may still work, but over time, the apple logo will appear on the screen more often, and will soon freeze on it, finally losing its functionality.

There is not enough free space on the phone

During the installation of updates on the iPhone, there may not be enough space available, then the restart cannot be carried out and the phone freezes at the logo.

If the reason is still not in the battery, and mechanical damage has nothing to do with it, you can try to solve this problem yourself. Undoubtedly, you can immediately contact the Apple service center in your city for phone repair. However, this will most likely delete all of your iPhone’s data, so be sure to secure yourself in advance by making a backup copy of all files to your device. If you decide to fix the problem on your own. by choosing one of the methods outlined in this article, you can save both time and money, and also keep your device data safe and sound. So, there are several main ways to solve the problem “iPhone 11 is frozen on the” apple “.

Read more:  Contacts are missing on iPhone What to do

General way to solve iphone 11 stuck on apple

Next, we will consider each of these methods individually, so that you can choose the one that suits you best.

What to do if the iPhone 11 does not turn on, the apple is on and off?

Smartphones have firmly entered the life of a modern person, we spend the whole day, periodically or for a long time looking at the screen of our iPhone. All information is loaded into the phone and is continuously used by us. Images, audio and video recordings, contacts, text and voice messages, documents. all this is “securely” stored in our iPhone, with which we are inseparable. But if one system failure occurs, and all data is out of reach, and even at risk of loss. What to do and where to run if the iPhone does not turn on, the screen lights up “apple”, and then it turns off? In this article, we will look at the main reasons for the iPhone freezing on the Apple logo during boot, so that later you can avoid repeating this situation, and also offer top 3 ways to get out of it.

What to do if iPhone gets stuck on Apple logo

Tenorshare’s ReiBoot is a dedicated application designed to fix any operating system error or glitch on iOS devices. The unique advantage of the program is the minimum effort from the user: you just need to make a couple of clicks of the computer and the seemingly insoluble problem will already be eliminated from your iPhone.

So, let’s look at the very few clicks that you need to make in this program. First of all, download the program from the official Tenorshare website and install it on your computer. Next follow these steps.

Step 1 Run the utility on your PC. Connect iPhone to computer with USB cable and unlock it.

Step 2 In the program window, select the “Enter recovery mode” option. Wait until the iTunes icon appears on the screen of your iPhone.

Step 3 After that, in the program window, click on the option “Exit recovery mode” that has become available. After that, your iPhone will be restarted normally and is available for use.

As you can see, the instruction is extremely simple and does not require any special knowledge or special efforts. At the same time, the result cannot but please. 100% return of iPhone functionality in a matter of minutes. However, in addition to this function, the program has a number of other features that may interest you and encourage you to have this utility in your “desktop” programs.

  • The program supports all iOS devices: iPhone, iPad, iPod, including recently released models such as iPhone 11.
  • The utility is compatible with all versions of iOS, works on a computer with both Windows and Mac.
  • Can be used to fix a wide variety of iOS system crashes and errors: over 50 different system bugs in total.
  • A unique feature of the utility is the ability to fix the device’s system without losing the data stored on it. an indispensable feature in a situation where it is impossible to make a backup.
  • In addition to updating the system, the program allows you to carry out the reverse operation. downgrade the system, just as quickly and efficiently.
  • The program can also help in case of problems with tvOS.
  • User-friendly interface, ease of use, tips accompanying the user in the process, make the use of the utility pleasant and comfortable.
  • The availability of the program installation in Russian expands the circle of potential users.

Update 2020-05-21 / Update for iPhone 11

What to do if iPhone is frozen on apple

After updating or restarting, it may happen that the iPhone freezes on the apple and does not turn on. How to solve this problem and start the smartphone again, read our article.

The long-awaited iOS 13 update was released recently. we talked about its main features in a separate article. Sometimes an upgrade carries not only cool features, but also a bunch of bugs. Sometimes installing an update leads to the fact that the smartphone freezes at the boot screen and does not want to turn on. Also, this problem may occur after restarting the device. Sometimes iPhone freezes when connected to PC or unsuccessful Jailbreak. what is it, read here.

Less commonly, the problem occurs due to the hardware. usually after an unsuccessful or self-repair. To prevent such a sad outcome, we advise you to use only the advice of Apple Authorized Service Centers.

Read more:  How To Control An Iphone

Fortunately, in many cases, everything is easy to fix on your own without contacting the service. We will show you a few proven ways to help revive the iPhone, which turns on and off before the apple.

Using Recovery Mode if iPhone won’t turn on

In order not to lose information on the iPhone, you can try using the recovery mode, aka Recovery. This method is most effective if the problem occurs after a failed system update. The smartphone will reinstall iOS without erasing your personal data.

  • Connect iPhone to Computer Using Lightning Wire.
  • If you have an iPhone 7 or older, press the Power and Volume Down buttons at the same time. If the older iPhone is the Home and Power key.
  • Wait for the notification that the smartphone is put into recovery mode and follow the advice on the PC screen.

How to Hard Reset iPhone without Button

New iPhones don’t have a Home button. Namely. on the iPhone X, iPhone XS / XS Max, iPhone XR, iPhone 11/11 Pro / 11 Pro Max. But even for them, you can perform a forced restart if the iPhone does not turn on, and the apple is on.

The process is a little more complicated than for older models.

  • Press the volume up button and release it.
  • Then press the volume down button.
  • Hold down the power button and hold it until the screen goes out (the Apple logo disappears) and the device starts to reboot.

Hard restart when iPhone won’t turn on and apple is on

Turn it off and on again. this method helps in most cases, not only with broken iPhones, but also with PCs, routers and mobile gadgets. The process for starting Hard Reset depends on your iPhone model.

Recovery through DFU mode

In case your iPhone does not turn on, the apple burns and goes out when you reboot, there is a special firmware update mode, also known as DFU (Device Firmware Update) mode. When it is a forced rollback of the system, error diagnosis and emergency device update.

If the reboot and recovery option did not help you, then DFU will become a kind of “plan B”. We still do not recommend starting with it. try Hard Reset and Recovery first, and if nothing works, proceed to recovery via DFU.

DFU mode works mostly on older iPhones. Here’s how to turn it on.

  • Connect iPhone to PC using iTunes.
  • Press the Power and Home buttons at the same time, as in a reboot, for ten seconds.
  • Release the Power key, but hold Home until a message appears in iTunes about entering the smartphone into DFU mode.
  • Follow the instructions on the screen to reset iPhone settings.

Unlike the Recovery mode, the DFU works with the screen off, on which no icons are displayed. All data will be deleted from the iPhone during the firmware update: you will have to re-enter your Apple ID and adjust the iOS settings. To avoid losing important files when you reset your device, save them in advance to another medium or in the Apple cloud. We wrote more about backup in a separate article.

How to Force Restart iPhone with Home Button

Older iPhones are still equipped with a Home button. these are all devices from the first iPhone to the iPhone X. The most popular ones are: iPhone SE, iPhone 5 / 5s, iPhone 6 / 6s / 6 Plus / 6s Plus, iPhone 7/7 Plus, iPhone 8/8 Plus.

  • If you have a sixth iPhone or an older model, to restart, you need to hold down the Home button and the power key for about 10 seconds until the apple icon disappears from the screen. Also it shouldn’t blink.
  • If you have an iPhone 7 or older, press and hold the Volume Down and Power buttons at the same time until the white manufacturer logo disappears.

During the restart, the phone will restore all disturbed processes and start up normally. Remember that after this you will need to enter the password from your Apple ID account.

Contact service

If the tips above didn’t work for you, it might be a hardware issue. Recently repaired your iPhone with a questionable service? Or maybe they tried to replace something inside the device themselves, and after the repair there were extra parts left?

If you bought a gadget recently, you can contact Apple support and take advantage of the warranty. If the device is more than a year old, you should find a reliable service center and show the device to specialists. Read more about iPhone repair. on the manufacturer’s official page.