How to stream from computer to TV

TV requirements

In order to be able to transfer images from a laptop using a wireless connection, the TV must have a wireless adapter. In the process, he will be connected to a home router and will receive video from it.

Modern models of Sony Bravia, Samsung and others may adopt Wi-Fi Direct technology. In this case, the TV itself creates a wireless network. In this case, a router is not required to organize communication between devices.

Important! You can even transfer videos to a TV that does not have a wireless adapter or Wi-Fi Direct. For this, the presence of an HDMI input is sufficient. In this case, a mini PC the size of a USB flash drive can be connected to it.

Displaying images using Wi-Fi (mirroring the laptop screen on a TV)

To use the TV screen to mirror the image on the display, you need to use Miralinks technology or Intel WD.

Output and broadcast of images from a computer to a TV via Wi-Fi

Sometimes it is convenient to watch videos both on the computer and on the TV. Modern wireless technologies make it possible to provide this opportunity. To do everything right, you need to figure out how to transfer an image from a computer to a TV via Wi-Fi. This article will detail the ways on how to do it.

Options for connecting a laptop to a TV via Wi-Fi

In order to be able to receive data from a computer and select it on the screen, the following methods can be used:

• If there is a router in the house, and there are wireless adapters in the TV and computer, then you can send files between them via a local wireless network. In this situation, there is an access to media files located on the computer and plays them on your screen.
• Many modern TVs (for example, LG, Samsung) are equipped with devices that use Wi-Fi Direct technology. Its peculiarity is that you can create a wireless local area network without using a router. In this case, the connection to the PC occurs directly. This technology is similar to “Bluetooth”, but has a longer range. it is up to 200 meters.
• Miracast technology is a wireless communication protocol that is supported by the latest versions of Windows and most models such as LG, Panasonic, Samsung.
• Intel WD is another Wi-Fi protocol for communication between devices. It is used by computers with an Intel processor.
• MacBook can be connected using AirPlay.
• The use of a mini PC is possible. They are computers the size of a USB flash drive. One of the modern operating systems is installed on them. Connection to TV is via HDMI input.

Note! Using any of the listed options makes it possible to display video and images from a computer on the screen.

WiDi technology

To transfer this way, you need a computer that uses an Intel processor. It must be 3rd generation or older. A built-in wireless adapter from this company is required. You will need to install the Intel Wireless Display program from the Intel official website.

To make a connection, you need to do the following:

• Enable WiDi support.
• The laptop requires the Intel Wireless Display application to be running. All devices that have been online will be displayed. We need to find a wireless monitor. Security key may be required during connection.

After completing these steps, the image from the computer display can be duplicated on the screen.

Miracast technology

Previously, there was a need to separately purchase a Miracast wireless adapter. Now, most TVs are equipped with this communication protocol out of the box or receive it when the firmware is updated. This solves the problem of how to display the image from the computer to the TV via Wi-Fi.

The computer must be equipped with a wireless adapter that supports Miracast.

The connection procedure is as follows:

• In the TV settings, you need to enable Miracast support. Samsung TVs call this feature Screen Mirroring. If it is not possible to set the desired settings, then in this case you need to make sure that Wi-Fi is turned on.
• On a laptop, you need to open the Charms bar. In Windows 8.1, it is located on the right side of the screen. Then go to “Devices”, then. to “Projector (Transfer to Screen)”. After that, you need to click on the item “Transfer to wireless display”.

Note! If it is not possible to find the last item, it means that the computer does not support this method of communication. In some cases, it will be able to if you transfer the wireless adapter driver to a new version.

Miracast support in Windows 7 and above is built-in. For example, in this operating room, in order to use the TV as a monitor via Wi-Fi, you need to do the following:

• Press the WinP key combination. It is not necessary to press it for too long, as in this case the screen may go out.
• After that, the screen will show the menu related to design. In it you need to click on the line “Connection”.
• The operating system will provide a list of devices connected to the wireless network.

After that, the broadcasting process will begin.

How to Cast Video from Computer to TV Using Google Chromecast

This device is a minicomputer running on the Android operating system. It is connected to the HDMI input of the TV. It can receive from a laptop and duplicate one of the tabs of the Chrome browser on the screen. In addition, it can work directly with the YouTube.com service. In this case, the laptop can be turned off, and the device will broadcast video directly from this site or broadcast TV programs.

How to connect a computer to a TV via Wi-Fi

In this article, we will tell you how to properly connect a computer via WI-FI to a TV, consider several of the most popular options today. The meaning of such a connection is the ability to conveniently watch video files and photos stored on a computer or broadcast over the Internet on a large screen.

What you need to establish a wireless connection?

Since Wi-Fi involves the exchange of data via a radio channel, first of all, you need to make sure that your Smart TV, like your computer, is equipped with a built-in Wi-Fi module or optionally supports this technology.

As for laptops, almost all of their modern models have a hardware built-in Wi-Fi module. If you want to connect a stationary desktop to the TV, then you will have to additionally purchase a special Wi-Fi adapter for it.

The adapter can be made in the form of a PCI-card built into the system unit with an antenna or an external USB-module, which looks like a regular USB flash drive. The same external Wi-Fi adapter may need to be connected to the USB connector of the TV, if it is not initially equipped with a built-in module. To avoid connection and setup problems, it is best to purchase adapters from the same brand as your TV.

It will not be superfluous to pay attention to the version of the Wi-Fi standard that the modules support. Better to dwell on the most current and fastest version of IEEE 802.11n. It has a wide bandwidth and will not cause delays and freezes on the TV screen. Also, do not forget to update the driver versions for all network devices.

Wireless transfer of images or music from a computer (laptop, tablet) to a TV is easiest to organize in the following ways:

How to Stream Video From Your Laptop to HDTV | Intel

• Local area network LAN via Wi-Fi router (computer. router. TV).
• Intel Wireless Display (WiDi) or Wi-Fi Miracast (wireless monitor).

Connecting the TV to a Computer Using a Wi-Fi Router (DLNA Technology)

To organize wireless data transfer between several devices, it is required that they have built-in or external Wi-Fi modules and be combined into a single local network via a Wi-Fi router. At the same time, the TV must support DLNA technology. a set of universal standards for multimedia exchange. The availability of this feature can be checked in the accompanying technical documentation, although today all Smart TVs support DLNA.

We turn on the Wi-Fi router, configure it to work in DHCP mode (automatic distribution of network settings) and assign a password to enter the local network.

How To Cast Computer to TV. How To Cast Your PC To Your TV. Screen Mirror PC Windows 10 to TV

We connect the TV to the local network

From the remote control we enter the TV menu, go to the “Network” item and open the “Network Settings” tab. In the opened wizard for configuring network connections, activate the item “Wireless connection”. From the list that opens, select your Wi-Fi network, wait for the connection check, and enter the access password.

If the router supports WPS technology, then connecting the TV to a Wi-Fi network can be even easier. It is necessary to select the appropriate item (WPS / PBC) in the TV setup wizard and hold down the WPS button on the router for a while until the connection is established.

Installing a media server on your computer

Simply put, in order to transfer files to a TV over a local network, you will need to create several folders on your computer to store various types of multimedia files (video, music, photos). After that, these folders should be opened with extended access from all devices connected to a common network, including from the TV.

How to screen mirror/ stream laptop/ PC to TV. wireless, no adapters!

The easiest way to do this is using any media server program that is convenient for you, which is designed to organize access to network resources from various connected devices. There are a lot of programs that solve this problem: AllShare (Samsung Link), Samsung PC ShareManager, SmartShare, Serviio media server, Plex Media Server, Home media server and others.

The program should be downloaded to a computer, installed, conveniently configured and launched. After starting the media server, you need to go to the TV settings, where you will see the folders you have assigned with the multimedia content available for demonstration. Now you can view computer files by launching them directly from the TV screen.

Connecting the TV to a Computer Using WiDi / Miracast Technology

Unlike DLNA technology, this option for wirelessly displaying multimedia information from a computer to a TV allows you to view not only files recorded and stored on the computer‘s hard disk, but also those that are played online on its built-in web browser.

True, the WiDi / Miracast technology (screen mirroring) is very demanding on computer resources, so it is supported only by individual computers (laptops, tablets) with powerful hardware. And, of course, these advanced technologies must be implemented in the TVs themselves. If the TV only optionally supports WiDi / Miracast, then you will have to additionally purchase a special adapter, which can then be connected to one of its HDMI ports.

The principle of wireless monitor technology is that the picture that is currently displayed on the screen of your computer is compressed using a special algorithm, after which it is mirrored over the Wi-Fi radio channel to the large TV screen. At the same time, it is not at all required to connect the TV to a local Wi-Fi network together with a computer using a router: the TV receiver organizes a separate mini-network for communication only with a PC.

To start transferring an image, you need to install a special Intel Wireless Display application on your computer (if it was not preinstalled) and start broadcasting in it. In the TV Menu, the WiDi / Miracast function must be activated. This can be done in its settings by going to the “Network” tab, and then go to the item “Miracast / Intel WiDi”.

If the materials in this article did not help you solve your question, ask it on our forum.