How to share the Internet from your phone to iPad

Third-party programs

You can also use third-party programs to connect. Here you need to understand that in history you had to do everything by hand and commands before. So developers started making beautiful apps that let you do it all in one click. In fact, these programs do the same thing and I do not see much point in installing them.

But for the review I will show a few. There are for all phone models. look in your stores.

FoxFi

Download from the market. Go into the application. set network name, password, activate the network. Same steps, just a little less (or with installation more) unnecessary movements.

Osmino

Another one. but with a simpler interface and in Russian. But you can not make more than one program of your own. So choose any one, download it and use it. But it is better to learn how to do it without third party software. less risk of bringing yourself some kind of infection on your phone.

How to distribute the Internet from iPhone or iPad

Users of iPhone and iPad (with cellular module) have the ability to share the Internet from their mobile devices. It is possible to connect to the network via such a distribution not only via Wi-Fi, but also via Bluetooth and USB. This manual will tell you about what devices the function is available, how to configure it and what to do if the error “Modem mode” is lost as a result.

On which devices modem mode is available

• iPhone 4 and newer models.
• iPad 3 Wi-Fi Cellular and newer models with cellular.
• iPad mini Wi-Fi Cellular and newer models with cellular module.

How to unblock Internet from iPhone or iPad

Before you turn on modem mode on your iPhone or iPad, you need to make sure that you have Internet access enabled on your device. To do this, go to “Settings” → “Cellular” menu and activate the “Cellular data” switch. In the same menu under “voice and data” you can select the network standard.

Go to “Settings” → “Cellular.

Select “Modem Mode”.

Turn the “Modem Mode” switch on.

Wifi sharing from your iPhone or iPad will start. You’ll be able to connect to the Internet via your mobile device via Wi-Fi, Bluetooth and USB.

If you connect via Wi-Fi on another device or computer, you will need to enter a password. The system will generate it automatically. For your convenience, you can specify your password by going to “Wi-Fi password” section.

“Modem Mode” is gone. what to do

The “Modem Mode” tab may disappear after updating iPhone or iPad to a newer version of iOS. To restore the item, and at the same time the functionality of the function, you can specify the settings of mobile Internet manually.

To do this, go to “Settings” → “Cellular” → “Cellular data network” and enter the network settings of your mobile operator:

APN: internet.mts.APN: internet User name: mts Password: mts

APN: internet.beeline.ru Username: beeline Password: beeline

APN: internet Username: gdata Password: gdata

APN: internet.tele2.User name: leave blank Password: leave blank

iPad Hotspot Tether with iPhone (2021)

APN: internet.smarts.Username: leave blank Password: leave blank

Immediately after specifying the settings “modem mode” becomes available for use.

How to give out WI-FI from android and iPhone?

Are you familiar with the situation when your friend has run out of internet traffic, and he asks you to give out WI-FI? Almost every person who has recently graduated from school or college is familiar with this situation. Fortunately, it’s pretty easy to do, even for those people who are far from modern smartphones.

How to share WI-FI with android?

In all versions of android there is a function to enable the access point. That is, the owner of a smartphone “turns” his gadget into a router. Then another user connects to his fellow user’s network and sits on the Internet. Now let’s look at the whole process in more detail.

First of all, the person who wants to share the network must enable data transfer. Next, we recommend that you follow the instructions below. Do not forget that different Android versions may have different partition names, but usually the names are very similar.

• Go to settings.
• Go to “WI-FI hotspot”.
• Click on the “Access Point Setting” button.
• In the window that opens, type in a name first, to make it easier for a friend to find your network.
• Now select the type of protection, it is recommended to use WPA/PSK2, it does not slow down the internet connection. You can also put it without protection, but then anyone in the vicinity can connect to your network.
• Now you must enter the password (if you choose not to protect it, then skip this point). It must be at least 8 characters long. Do not forget it, because after a while your friend will have to enter the password.
• All that remains is to configure the number of users.
• Now click the “Accept” button.
• The last step is to activate the access point, by moving the slider at the top right of the screen.

To connect to the network on the second smartphone, enter the settings, then the section “WI-FI”. On the screen you will see all the available WI-FI traffic. Need to find the desired network by name, click on it, then enter the password and click on “Connect”. After a few seconds, if the password was entered correctly, the smartphone will connect to the access point.

How to share WI-FI from the iPhone?

In general, most versions of iPhone and iPad do not have this function. The developers of iOS insert the access point in some versions, and remove it in others. Why they do it is still unclear. Nevertheless, it is still possible to share the Internet.

• Go to settings.
• Go to “Cellular data transfer”.
• At the very bottom will be a section “Modem mode”, you need to open it.
• In front of you will be the fields called “APN”. They need to enter the word “internet” without quotes.

You should now see a section called “Modem Mode” in the main menu. Once you enter it, you will also need to enter the network name, password, etc. (see “How to share WI-FI from android”). Connection occurs exactly the same way as in Android.

Why the speed of Internet is low?

It often happens that the user is connected, but the Internet does not load or loads very slowly. First, you need to check the Internet on the first smartphone. If it loads browser pages in the standard mode, then this is not the case. The second step is to check if the password is entered correctly. We recommend lowering the encryption level, then the connection is likely to be restored.

If the internet is present, but its speed leaves much to be desired, then it is worth to check the signal level. If the “main” phone is connected to 2G Internet there is nothing surprising in the slowness of the Internet. It is better to have 3G or 4G signal and unlimited internet.

Also the speed depends on the connected users. Often people do not password protect a network and “unauthorized” people connect to it. To avoid this it is strongly recommended to put a password. It is better to distribute the Internet no more than 2-3 users at a time. But even that many people will quickly spend more than one gigabyte of traffic.

Whoever said what, but the modem mode on the phone is quite a useful feature. Anyone can figure out how to activate it. However, if it is absent, as on the iPhone, it will have to try to distribute the Internet. Do not forget that giving out WI-FI, you spend your internet traffic. So it’s better to think a few times before you do it. Especially if you have limited traffic.

• Follow all the steps of the first item to activate the “Modem mode” and turn on the Bluetooth.
• Connecting iPhone with iOS or Android device. Press “Pair” and enter the password that appears on the other gadget
• All that remains is to allow the apple device to use the Internet.

On the device you want to connect, select “Settings” Wi-Fi and find your iPhone or iPad in the list. Then click the Wi-Fi network that you want to connect to. Enter the password for modem mode, if necessary.

If modem mode is not available

But it may be that the item “Dial-up mode” in the settings is disabled (highlighted in gray) or even absent. In this case, select “Cellular” in the settings and enable data transmission (“Cellular data”).

It is also useful to go to the “Data settings” section. “Cellular data network” and scroll down the page to make sure the APN, Username and Password fields are filled in and match the cellular carrier you are currently using.

Usually ISPs configure the Internet connection automatically. But failures and abnormal situations are possible. If the listed fields are not filled or filled incorrectly, you need to get the actual parameters from the operator.

The appearance of iOS settings has not changed much over the years. Knowing how to distribute the Internet via Wi-Fi or USB from iPhone 5s, you can easily figure out how to connect the most modern mobile gadgets from Apple.

How to share internet from phone to tablet and vice versa. Settings for Android and Apple

Most mobile devices support Internet Sharing. It’s a quick process with the same working principle on all operating systems and models. So how to distribute the internet from your phone to your tablet is no problem.

Streaming Internet from your phone to your tablet can be useful in many cases. For example, you need to do some action online, but necessarily through your tablet computer. In the same way you can distribute Internet from your tablet to your smartphone or computer.

The principle of distribution of Internet from a smartphone is that the phone becomes an access point of the wireless network. To do this, use a 3G or 4G mobile connection.

Therefore to give out the Internet from phone it is possible only if on SIM-card the positive balance and there is an Internet traffic.

Important! Mobile operators have a separate billing and speed limitation for distribution. You need to know if your active tariff supports this feature and if there is no extra charge for it.

There is no extra charge in most tariffs, but there is a limit to charging specifically through the giveaway. So if the smartphone is connected to the network, but if the tablet connects but does not access the World Wide Web when the access point is active, then the problem is clearly in the tariff.

Creates an instant attention from the lock screen

You can use apple, pencil with a compatible iPad to create instant attention from the lock screen or pick up where you left off on your last Note. To change these settings, go to the Note Settings menu, tap Note, access from the lock screen, and select the option.

Tap the lock screen with an Apple pencil and create a note. All that you create automatically saved in the notes.

• Open the Settings on your smartphone or tablet.
• Select the Wireless category and go to
• Open Modem mode and activate Wi-Fi hotspot.
• In the access point settings, specify the name of the future network and a password for it.
• Open “Settings” menu and select “Mobile Data / Cellular” item, or Mobile /Cellular in older versions of the operating system.
• In this section enter the Personal Hotspot submenu and set the Personal Hotspot slider to On.

It does not matter what version of Android you have, and what kind of smartphone (Samsung, Xiaomi, etc) you have, what kind of wireless network is supported?д.), the access point is enabled in the same way on all phones! In order to distribute the Internet you need to turn on the access point:

• Open the settings and go to “Connections.
• Go to “Mobile hotspot or modem”. It may be called a little differently, but “AP” should be:

Done! You have successfully activated the access point and your smartphone acts as a Wi-Fi router. To find out/change your network name, password and range, just press mobile hotspot and you’ll get a page like this:

In order to change the network name or password, just press the corresponding field and enter a new name/password.

Also, there is a “Connected Devices” section at the bottom of this page where you can see and control all connections:

In the bottom left corner, there is another very handy button/function called “QR Code”, when you click on it, it will open a full screen QR Code that other users can point to without entering a password:

Just in case I write: on the device with which you want to connect, you just need to turn on the camera and point it to this QR Code.

If you want to distribute Internet from your phone in other way then in settings, section “Mobile hotspot” you can switch on “Bluetooth modem” or “USB modem”:

So you can use the phone as a modem for a computer and other devices that can not connect to WI-FI.

Video instruction with a clear example of how to create an access point and use a USB modem: