How to Set Up Your TV Through a Box

IPTV is a digital television, it can be connected both to a TV, and to a computer, smartphone, media player. There are several ways to connect IP TV to the LED panel, which makes it possible for any user to configure and view digital channels based on their own capabilities, you just need to know how to do it correctly.

How to Set Up Your TV Through a Box

General Connection Information

Today, interactive TV is a serious alternative to cable or satellite television. Broadcast quality is fully consistent with the modern characteristics of TVs, and additional functionality significantly expands the possibilities of using TV content. Over, a new generation of interactive television has some advantages regarding broadcasting or cable broadcasting. It is better sound, better picture. Over, the cost of content is more than affordable. Given the capabilities of modern high-resolution TVs, it makes sense to set up IPTV on a TV. In addition, IPTV owners can use other services related to television content: recording programs, broadcast archive, the ability to pause the broadcast, etc.

You can connect digital TV in any convenient way, each of which has its own nuances:

  • Through the connected iptv prefix;
  • Through a router through a wireless connection;
  • Using special applications;
  • Through an internet browser.

Features of connecting the console

Connecting a digital set-top box is not much different from installing various TV tuners. The connection to the router is via a standard Ethernet connector, and wireless setup via wifi. If you wish or some difficulties, you can use the wire and connect it to the LAN-connector.

On any set-top box for IPTV there are other outputs:

  • AV for connecting to older TVs;
  • HDMI for more modern panels;
  • USB connector (usually located at the front).

To receive digital television on the TV, there is either HDMI-output, or AV. Connection with the prefix is ​​carried out through the inclusion of the corresponding wire. This is the physical connection to the prefix.

Set-top box setup

After connecting the console, it must be turned on. To watch IPTV, a menu is displayed on the TV. Setting up software is generally quite simple. There is a Setup button on the remote control, after pressing it, you need to make the following settings.

  1. Set the clock and date in the Advanced Settings window. This is necessary to use various options, such as timeshift and on Demand.
  2. For a wired connection, you need to configure a network connection: for this, select the type (Ethernet connection) in the “Network Configuration” menu.
  3. Next, in the next tab, click AUTO (DHCP) and activate it, confirm the command by clicking OK.
  4. In the “Network Status” tab, check the status of the Ethernet connection.
  5. Open the “Servers” menu, register pool.Ntp.Org. In the NTP servers field.
  6. After that, you can configure the by opening the “Settings” tab, disable the “Force DVI” and “automatic / automatic frame rate switching” items. Then it remains to set the screen resolution parameters, set the output mode (here you will need instructions, for example, in older models it is called PAL).
  7. Save the settings and restart the console.

In the event of technical breakdowns, marriages or other difficulties, incorrect operation of the console is possible. If after all the manipulations the device gives errors, you can repeat the setup, see the explanation of the problems in the instructions or contact your provider or the manufacturer of the set-top box for technical support.

How to configure IPTV through a router

You must be logged in. In the router menu via the browser. Depending on the manufacturer and model, the procedure may differ, but in general the sequence of actions is similar, so based on the recommendations below, you can figure out how this is done on a particular router.

On D-Link the setting is different for different connection options. If you plan to watch through the set-top box, you should select the “IP TV” item (may be called “connecting multimedia devices”) in the main menu and reserve one of the ports through which the set-top box will be connected. Further, all settings are carried out directly on it.

When watching IPTV directly through the TV.

  1. In the router menu you need to enter the advanced settings. Select the “network”. “WAN”. “add” section. Scrolling down the page below, in the “miscellaneous” section, check the “IGMP” item. Save the result.
  2. We return to the main menu, look for the “additional”. “routing” section, click add. A line appears in which you need to enter the values ​​manually. The destination network is “”, the network mask is “”, the gateway is the IP address assigned by the provider, the metric is “1”, and through the interface it is “automatically”. Save the result.
Read more:  How to Remove Instagram Phone Number

At D-link Dir-300 Series routers you need to go into the settings, find the Advanced Network tab, check “Enable Multicast Streams”. After rebooting the device, IPTV will start working.

At ASUS you should enter its settings, open the LAN section and select the “route”. We activate the option “multicast routing” and save the result.

TP-Link Routers have a multicast function, that is, IPTV support. By default, it only works on fresh firmware. Just update the router to make it work.

At Netgear devices you need to enter the “quick jump menu”, open the settings and “Internet port settings”. Next, indicate the desired connector. It is reserved for IPTV.

At ZyXEL in the device menu you need to click on the globe in the panel below.

  1. We are looking for the “connection” tab, select “broadband connection” and open it.
  1. Choose the connector through which the set-top box or TV will be connected. A window will open for adjusting its parameters, mark “use to access the Internet”, “enable”, IP parameters. “automatically”, “use the IP connector” and save the result.
  2. Next, open the “components” item. Activate “IGMP / PPPoE Proxy”.
  3. In the “home network” menu of Broadband Connection we set the value “to the provider”, for the Home Network you need to specify “to the home network”, activate “IGMP Proxy” and save the result.

Wireless connection

If the user does not want to lay extra wires, then you need to familiarize yourself with how to connect digital TV via the Internet. Consider the algorithm on the example of popular brands of TVs.

For owners of LG technology Wireless IPTV available and broadcasting digital channels on a TV through a specially designed SS program IPTV. To access it, you will need an Internet connection. You can install the application from a USB-drive or after downloading.

To download and run the program, you need to go to the Smart menu, open the Smart World tab. In the address bar, write the name SS IPTV and set the search command. When the utility is displayed in the list, it must be installed and then opened. Connecting interactive television to TVs of other brands, such as Philips or Samsung, is carried out by a similar algorithm of actions.


In Philips TV panels, you need to connect to the Internet by connecting to an access point (router). Then press the Home button on the remote control, open configuration menu. In the network settings, select “Operating mode” and register the value of DNS. To connect to digital television, just download any of the available widgets.


To watch IPTV on a Samsung TV, as in the previous methods, you need to configure your Internet connection and install a special utility.

  1. On the remote control, open the Smart Hub menu, press the “A” button. Here you need to create an account, enter the Develop login and password.
  2. Then enter the settings and open the “Development” item. In the IP address field, enter, or use the alternative set
  3. After selecting the “Application Sync” tab, when the process is over, press Enter.

Now in the list of applications the user will be available special utility nStreamPlayer to watch IPTV television.

You can learn more about the wireless connection of the TV set to the Internet from the article on the capabilities of TVs with Wi-Fi.

“How to set up digital channels on Samsung TV?”. An urgent issue for users of devices of this brand. Digital TV has existed on the market for several years and has not yet lost its popularity. This is logical, because the user after a one-time installation will no longer waste time and nerves on tuning the antenna. Or constantly re-tune the TV to watch another channel. This method of signal transmission provides for the possibility of heavy snowfall, heavy rain or strong winds. With prolonged exposure to adverse weather conditions, interference can sometimes occur, but operation does not stop completely. About connection methods and configuration methods in this article.

Preparation and basic settings

To set up digital channels on a Samsung TV, calling a wizard is optional, since the process is not complicated. The main thing is that the model supports the DVB-C tuner. The methods for setting up Samsung TVs differ, depending on the particular series, but general recommendations apply to each device.

  • Press the button on the remote control that opens the menu. The appearance and location of the button depends on the model. The instructions have a picture that shows all the buttons with signatures and their main functions;
  • Find “Options” / “Automatic search options”;
  • Select “Digital Signal”;
  • Expect the window to open automatically to display the signal quality;
  • Indicate the type of signal reception, frequency of reception and range.
Read more:  How to update your iPhone 5 to iOS 12

The main point remains unchanged, regardless of the specific model. The main thing is to start, then the configuration takes place on an intuitive level. If you encounter difficulties at a particular stage, you can always perform a factory reset and start over.

The principles of television and what you need to receive a signal

Manufacturers to set the signal offer several options.

  1. Analogue It works by transmitting radio waves. It functions by connecting an antenna. The method is outdated, therefore, active steps are being taken to completely eliminate it.
  2. Interactive. Produces of any quality. During data transfer, the content does not go through the encoding process. To work, you need a special cable to connect to the Internet, so the TV must have an appropriate connector for it.
  3. Digital Prior to the transfer, the content is encoded. It comes in a compressed form, but without losing high quality indicators. As a result, a large amount of information arrives in a short period of time. You can configure digital signals via satellite or cable.

Each method is characterized by a certain transmission quality and the level of ease of operation.

Essential (DVB-T / T2)

DVB-T / T2 is characterized by the greatest demand among users. To establish work do not need special devices and a lot of money. The user must have:

  • A receiver for transmitting a signal;
  • A decoder for processing the received information into a format that is easily received by the device.

This method is considered the easiest to connect.

Channel (DVB-C)

The image on the TV appears due to the transmission of a digital signal without using an antenna. The user receives a common converted signal. Internet service providers activate the service and bill it monthly.
The advantages of this option are:

  • You should not spend a lot of money and time for special equipment. The provider independently provides everything necessary and simply includes the price of services in the current package;
  • A large number of available channels. The user chooses a package that includes what he himself noted.

The signal comes through a prefix, which transmits the image to the screen. Providers offers a receiver taking into account its cost in the connected package. The user can purchase the device immediately upon the activation of services or pay a monthly rent before the expiration of the contract. Detailed information on tariffs on the site “Dom.Ru BCS”.

Satellite (DVB-S / S2)

DVB-S / S2 is considered universal because it is characterized by:

  • The ability to fix any frequency. All parameters are indicated in the menu in a specific option;
  • Perception of a high power signal, that is, the user does not lose the image in bad weather;
  • A wide range of channels, which allows you to independently choose the main topic of television shows.

Depending on the needs, different packages have been developed that are distinctive in price and services.

If you have any questions or have complaints. Please let us know

Using connectors

To set up your Samsung TV to receive digital television, you need to understand what connectors are and what they are for:

  • AV. Previously used to set the signal to the old format. In modern models, it serves as the connection between the TV and the satellite:
  • RCA. Consists of three plugs. The most popular type, due to the high level of bandwidth;
  • HDMI. Cable that improves picture quality;
  • RE IN. Sets the signal through the antenna to the satellite;
  • LAN. Required to install modern interactive tools from the Internet;
  • USB. Adapter between devices for the exchange of information.

Such a number of abbreviations and connectors often scare users who rarely encounter technology. But all connectors are responsible for a specific function. The method of their work becomes clear after the first use.
It is important for your own safety to comply with the connection rules. First install all the cables and then plug the device into a power outlet.

How to set up your Samsung TV to receive digital TV channels

Successful reception depends on the sequence in which the user executes the instruction. If this rule is violated, the signal does not arrive or is characterized by low quality.

The setting is one of two options.

  1. Manually. Channel selection takes place in an automatically generated list. This is done in order to get additional channels without deleting already produced ones.
  2. Automatically. It involves the choice of the frequency range in which channels are determined without human intervention.

Before determining the method, you need to set up the TV. Open the general settings, select the language, region and code to save data from loss. As a rule, the digital code is in the documentation that is provided with the device.

Read more:  Recover iOS 6 On iPad 3

Auto Channel Search

You do not need to use additional devices to activate automatic search. The process itself, as a rule, takes no more than 15 minutes. To activate the work:

  • Open the menu with the remote control and activate “Broadcasts”;
  • In the new window open “Auto tuning”;
  • Indicate the source of supply. Indoor antenna, satellite, cable;
  • In the “Type”, select digital broadcasting;
  • Make the transition “Mode” / “Full” / “Scan”.

The system automatically searches for available channels. At this point, you do not need to do anything yourself. You need to wait a few minutes until the process ends. Search stops after pressing the Stop button.

Upon completion of the search, it is recommended to test the signal quality. If there are channels that display the picture in poor quality, you can reset all the settings and start the search again.

If you don’t want to repeat the actions and these channels are not needed, delete them separately. Perform the Transition / Dispatcher transition. Check the boxes for what you want to delete. Confirm the solution with the “Tools” button located on the remote control.

Follow the steps carefully, since when connecting to the automatic search, it is possible to delete channels from the already established list.

Manual channel search

Manual search requires more action from the user than automatic. Assumes the following points:

  • Open antenna settings;
  • Select manual type of settings;
  • Indicate broadcast frequency and module type;
  • Step up the search process;
  • Wait for the results of the specified time;
  • Save your changes.

The method does not involve complex actions. It is only necessary to follow the established algorithm.

Configure old devices

First install the cables in the appropriate connectors. Next, use the remote control to display the menu, activate manual search.

Smart tv

Connecting channels in smart TVs is similar to the standard rules. Only automatic search in smart is much simpler, since this device offers you to independently determine the type of signal reception. If the user decides to delete the old channels, they are automatically replaced by new ones.

Cable TV

Cable TV is similar to the rest of the options. You can find the channels after preliminary entering the frequency parameters.

Satellite television

Setting parameters starts with the broadcast frequency. First select a signal source, then go to the search. The search for channels available all over the world is automatically activated. The user can select any option as desired.

How to connect digital TV to a Samsung TV without a console

The development of innovative technologies made it possible to watch TV without a console. On this below.

IPTV setup

Interactive TV works without a set-top box, but requires an Internet connection. After you configure the IPTV scanner to search the system for IP addresses. Broadcasting works in a stream, so each channel works independently of the others. For a good image and the absence of freezes, you need the Internet at a speed of at least 50 Mb / s.

IPTV. Active for wireless internet. But keep in mind that the actual WI-Fi speed is in the range of 15. 30 MB / s, which results in a limited number of channels.

TVs supporting DVB-T2

Modern models with DVB-T2 support offer digital TV to tune in automatically or manually. DVB-T2 is the second generation European standard. To configure the user does not need any additional devices except the antenna. Such a TV already has a tuner that catches and transmits a signal.

Possible problems and solutions

Self-tuning may cause minor problems. Before you call the wizard, try to eliminate them yourself.

  1. Lack of image. See if all the plugs are firmly attached, whether the cables match the required connectors. For verification, it is better to repeat the connection process again. The cable may be damaged; inspect it carefully. If there is no mechanical damage and the cables are in the appropriate connectors, reset all settings and reconnect in the same sequence.
  2. Poor picture quality. Often occurs due to improper connection via cable. If reconnecting does not help, it is recommended that you use HDMI.
  3. There is no image with a valid signal. If the problem persists after checking the cable, then the channel is either not free or is prohibited for the region.

Connecting digital television to a Samsung TV will not create additional difficulties if you initially read the instructions and follow them step by step. You can get information about a specific series in the Samsung TV Guide. Access to it is open in the system settings. You can also read the paper instructions.