How To Set Up A Microphone On An Iphone

How to clean the speaker, microphone and other iPhone elements from dirt and dust: instructions for models 4, 4s, 5, 5s, 6, 6s

In whatever case or case the iPhone is located, it is impossible to completely protect it from dust and foreign particles. Sooner or later it will need to be cleaned, to return to its original shine. Next, we will tell you how to properly clean the speaker, microphone and other components of the iPhone 4, 4s, 5, 5s, 6, 6s.

Why clean your iPhone yourself

Agree, contacting a service center and giving money to clean your iPhone is not always true. It’s one thing if inside is not just moisture, but a sticky liquid like sweet coffee. and another thing when the microphone, headphone jack, speaker, etc. are dusty. Cleaning these holes and recesses does not require disassembling the gadget.

For example, a Lightning connector is not a problem to brush with a toothpick

What can be cleaned

You can clean it on iPhone:

  • speakers;
  • microphones;
  • headphone jack;
  • an interface jack to which “charging” or a computer’s USB port is connected;
  • SIM tray (requires special care);
  • general cleaning of the iPhone.

I would especially like to say about the main connector. In older iPhone models (up to the 4x generation), this is a classic 30-pin connector, vaguely reminiscent of the original interfaces of mobile Siemens, Nokia, Samsung (SGH series) of the 2000s. release. In newer ones (starting with 5x) this is a Lightning type connector. a simplified and faster interface.

As a guide to action. cleaning from dust and dirt is precisely the microphones and speakers on the iPhone. Attention! Before cleaning, turn off your iPhone and disconnect all cables.

How to clean your iPhone yourself

The general step-by-step instructions for cleaning your iPhone are as follows.

  1. Prepare cleaning products and materials.
  2. Turn off the iPhone and unplug the charger (or USB cable) and headphones, if connected.
  3. Turn the iPhone over so that the cleaner doesn’t flood there.
  4. Apply a small amount of cleaning agent to a cloth or napkin and thoroughly wipe the contaminated area. When using pointed objects to remove stuck particles, proceed very carefully.

Do not overdo it! An extra cleaning agent can leak inside and interrupt the gadget for several days or weeks. There are cases when, for example, the volume control buttons were poured with alcohol, and one of them was pressed by itself for several days after such cleaning. particles fell onto the conductive tracks of the button and served as a conductor, working no worse than the closing membrane of the button itself.

Microphone Cleaning

On modern iPhone models, starting with 5x, at least three microphones (previously there were only two). The use of more than one microphone, as you know, allows you to more effectively deal with the noise of streets, entertainment centers, cinemas and other public places during a conversation.

One is located in front, the other in the back, the third in the bottom

Microphones are cleaned with a toothbrush, toothpick or cotton swabs soaked in alcohol. Take care. a toothpick or toothbrush bristle can damage the microphone membrane. You can apply a purge. in the suction mode.

How to clean the speaker and iPhone interface jack (4, 4s, 5, 5s, 6, 6s)

The iPhone speakers are located below, next to the Apple iGadget interface connector. it is similar for all iPhone and iPad and serves to connect “charging” and a PC.

You can use any means at hand, including toothpicks

It is cleaned in the same way as microphones. The latest iPhone models have speakers protected not by a grid, but by rows of holes. but this does not change the approach to cleaning them.

What do you usually clean iPhone and other gadgets

Do not use any means in the nebulizers. a stream of small droplets escaping from the atomizer will drive them deep under the body. The danger for gadgets is also ammonia (ammonia water).

Read more:  How to Choose an Iphone 6 Mobile Phone

As for the material, for large parts, any clean, lint-free rag is suitable (not synthetic, if you still decide to use a different solvent other than alcohol), but to clean the holes for the microphone or speakers, you can’t do without cotton buds or toothpicks.

Attention! When cleaning the holes for the speakers, microphone and connectors, turn the device over so that the cleaning agent does not leak into them! Any solvent can easily damage the membrane of the speakers and microphone.

It is not recommended to use different gels, household detergents (such as Domestos), wet wipes. excluding wipes for cleaning optics. etc. Paper should not be used as a cleaning cloth. it is very “dusty”.

Be careful with the needle. it can easily pierce the speaker or microphone and lose sound. If you use it, carefully monitor your actions.

Do not use water-based solvents. these include impregnation of wet wipes. Water, once inside in the form of any mixture, will disrupt its operation. Use volatile fluids that easily dissolve sebum with your everyday impurities, regardless of their nature.

Do not use electrifying fabrics, such as natural wool and silk. Static electricity, having got on the conclusions of the Lightning-connector, leads to a breakdown of the interface controller. the iPhone from this can stop charging and / or connect to a PC (depending on which conclusions of the connector it got).

How to Set up a Microphone on an iPhone

Purging inaccessible places helps to remove only dust and specks. The vacuum cleaner or compressor should work in the suction mode. do not use it to clean the iPhone in the blowing mode, and do not use cylinders with compressed air, as this can drive the particles inside. Service centers use special vacuum mini-vacuum cleaners. they are used to clean both laptops and gadgets. Blowing away does not work on stubborn dirt and various stickiness. in the latter case, if the liquid penetrated deeply and froze in the form of stickiness, only disassembling the iPhone and cleaning it with ordinary alcohol will help.

Other cleaning methods

Anything can come to an inquisitive person. even using a micropore-cleansing cream on your face to clean small holes like microphones on your iPhone. But this is associated with the risk of driving the “cleaning agent” deep into the device, blocking this hole.

The most effective way is a complete cleaning, combined with disassembling the gadget. But this procedure is better to entrust to the “specialists” working with Apple gadgets. In the arsenal they also have polishes, special grinding pastes and other exotic means that help restore the original shine to the screen and the iPhone case.

Video: a universal way to clean your iPhone with a toothbrush

Cleaning the microphone or speakers on the iPhone is not a difficult task. You will succeed!

  • Author: George Kuleshovsky

How to clean the speaker on iPhone 6? Easy way

iPhone 6. This is a problem smartphone in terms of sound. Often users complain about a bad sound. These posts are usually teeming with different forums. Sometimes it’s enough to simply blow through the speaker, and sometimes a weak sound is the result of a software flaw and is eliminated by software. But more often than not, the speaker needs to be either cleaned or replaced. Therefore, it is important to know how to clean the speaker on the iPhone 6. This may well return your smartphone to its previous high-quality sound.

Causes of poor sound from the speaker

There may be several reasons. If the phone spills water, then the sound is bad from the speaker. This is a logical consequence. Also, the speaker could become clogged with dust, and even worse. the sand. Therefore, remember if the device fell on the sand on any beach.

It is worth noting that iPhones have a special metal mesh over the speaker. It serves as a protection, but during operation it becomes clogged naturally.

Software is rarely the cause. There are reports on the forums that the issue of quiet sound was resolved after a software update. So for starters, just try installing the latest software or, if it isn’t already, roll back to your previous iOS. If this does not help, then read the article below, which will tell you how to clean the speaker on iPhone 6. Try to adhere to the tips.

What is needed for cleaning?

We need only 2 ingredients or tools:

  1. Brush with a hard pile. If you find a brush with a soft pile, then that’s okay. Just trim the pile; it will be hard at the base of the bristles. This one is perfect for us. You can use a cotton swab, but it is worse in terms of effectiveness.
  2. Some kind of liquid containing alcohol. It can be cologne or alcohol itself. It is available to use gasoline for lighters (high purification).
Read more:  How to Create an Account on Iphone 4

All this is in almost any home. Prepare a brush and liquid. Let’s say it will be gasoline.

How to clean the speaker on iPhone 6? Instruction manual

Pour gasoline into some small container. You need to pour a little bit. The main thing is that the brush can be dipped in gasoline and moistened, no more. Do not allow gasoline to drip from the brush.

Moisturize the brush and very carefully process the speaker grid. Disassemble the phone and get the grid is not necessary. Simply moisten the assembled phone grid with a brush. Repeat this procedure several times and very carefully. After the second or third brushing, visually you will see that the speaker has become much cleaner.

After that, simply wipe the remaining gasoline from the speaker grid and from the phone with a cloth. Now the smartphone should work better. Check if the interlocutor is better heard. If not, then you have to clean it from the inside. This will require special tools. At the very least, you need a screwdriver with an asterisk, which only people who repair phones and small electronics have. You also need the skills of disassembling and assembling smartphones, because when you remove the cover of the case, you can accidentally break the cable. Therefore, if you do not know how to clean the speaker on the iPhone 6 from the inside, then it is better not to go inside, but give the phone for repair.

Although usually the simplest external cleaning helps with a hard brush and an alcohol-containing solution.

How not to clean?

Some users do not know how to clean the speaker on the iPhone 6, and try to do it with a toothbrush, but do not need to. The toothbrush is very stiff and with long hairs, so it can damage the mesh, which can later clog the speaker itself.

It is also advisable to use alcohol solutions, rather than alcohol itself. Although the latter is also suitable. But in no case do not use water. Water is oxidizable and not a degreasing agent. Alcohol and solutions based on it degrease the surface and are not susceptible to oxidation, which is why they are ideal for cleaning.

Alternatively, you can safely use disposable alcohol wipes, which are usually intended for hands. But make sure that a piece of the napkin does not stay on the speaker grid. Also, do not use alcohol-free wipes, because most wet wipes do not contain it now, although they also slightly degrease the surface. Some users try to do this with a toothpick. Do not use it to clean smartphones, no matter how. To clean the speaker on the iPhone 6 at home with a toothpick will not work. You just break the net, which is already not durable.

Now you know how to clean the speaker on iPhone 6 S and other models.

How to prevent clogging of the speaker?

It is impossible to advise anything new in this regard. Standard smartphone care tips will do. Just do not spill water on it, do not throw it in the sand and try not to drop it at all. In any case, sooner or later the speaker will clog, and the interlocutor will again be hard to hear, no matter how well you monitor the state of your smartphone. But now you know how to clean the speaker on the iPhone 6 plus at home, and you won’t be afraid of any blockages. Use this method and recommend to friends.

Iphone microphone does not work. Fix

If the iphone microphone does not work, many important calls will be missed. For example, a person does not hear you during a telephone conversation, or in FaceTime chat, etc. In addition, when recording, there will be no sound. How to get rid of this annoying problem? There are several ways to fix this, everything is quite simple, including rebooting your iPhone, cleaning the microphone and headphones, and also updating the software. Without further ado, let’s move on to solutions.

See also: 5 New Ways to Improve iPhone Battery Life

Microphone Check

Before we go any further, trying to take some troubleshooting steps, first check your microphone on the iPhone. There are various ways to do this.

Using Voice Memos

  • Open voice notes of the application, which you can find on the main screen.
  • Make sure your fingers do not cover the microphone.
  • Click on the record icon (red circle) and try talking. As soon as you finish recording your voice, click on the red button.
  • Now, play the voice recording by clicking on the play icon next to the red button. Make sure you can hear your own voice recordings clearly.
Read more:  Mute Shutter Sound Iphone 6

Try to access Siri and ask something. Press the home button a little longer until Siri appears. Try talking to Siri and asking her something. If Siri does not answer your question or question correctly, try again louder.

Using App Camera or FaceTime

You can also use the function in the camera application or FaceTime to record audio. Launch the camera app and install it on the. Then record your voice and play to check if you can hear your voice clearly or not.

Remove iPhone Case

Try removing your iPhone case, screen protector, and anything else that might cover the speakers and microphone on the iPhone. Check if the microphone in iphone works after the above steps.

Turn Off Noise Cancellation

Noise reduction is a useful feature that you can find on the iPhone. This can help reduce ambient noise when you make a phone call. To disable it, go to settings and press. Then select the availability, scroll down and you will find the “Noise Canceling Phone”. If you see a green button next to it, just click on it to turn it off.

Reboot IPhone

The reboot process may remove the application that has an error or freezes. In many cases, the iphone microphone problem does not work, it can be solved by rebooting the device. To do this, press and hold the sleep / wake button until the red slider appears and slide right to turn it off. Wait a few seconds, then turn it on again by pressing the same button until you see the Apple logo.

Clean Microphone

If there is dust or dirt covering your microphone on the iPhone, this may affect the sound quality recorded with the microphone. She can block the sound, preventing him from reaching the microphone. You can clean it from dust with a brush or cloth. In addition, you can use a toothpick or needle to clean it from dirt, but do it gently and carefully.

Check Headphone Jack

Remove the headphone accessory from the iPhone and make sure there is nothing inside the headphone jack. You can clean it to make sure there is no dirt or dust that blocks it. Use the same tools that we already mentioned in the “Clean the microphone” solution.

Check Microphone Settings in IPhone

If the problem only occurs when using certain applications, check your microphone settings on iPhone. Make sure the apps have permission to access the microphone. Open settings privacy click on the microphone.

IOS update

Check if there is a new update for iOS on your iPhone. Go to Settings General software update. If there is a new iOS update, it is recommended to download it. This method can help you solve the problem with broken microphones in iPhone. To receive the update, simply click on the “install” button in the software update window.

Reset All Settings

If you did all of the above, but nothing helped, and the iphone microphone does not work, try resetting all the settings. This method will reset all settings on your iPhone, including microphone settings. The steps are so easy. Click Settings General Scroll down and select Reset. Then choose to reset all settings. You may need to enter a password before continuing with the process. Then click “reset all settings” on the pop-up window.

Erase IPhone

If resetting all the settings did not fix your microphone problem, try erasing your iPhone. This method will not only reset all iPhone settings, but also applications and content inside. Therefore, it is recommended that you back up your data before starting the process. To erase iPhone, go to Settings General discharge reset all content and settings enter password on the popup window, click erase iPhone.

IPhone Recovery

You can restore your iPhone to factory settings via iTunes. You will need a computer to do this method, as well as a good internet connection. Here are a few steps:

  • Make sure you have the latest version of iTunes.
  • Connect iPhone to Mac / PC.
  • Launch iTunes.
  • Click Restore iPhone in the dashboard.
  • Click the restore button to confirm your action.
  • Wait for the process to complete.

These solutions are effective on iPhone 4, iPhone 4S, iPhone 5, iPhone 5 c, iPhone 5S, iPhone 6, iPhone 6 plus, iPhone 6S and 6S plus pictures, iPhone SE, iPhone 7 and iPhone 7 plus.

If the article was useful to you share it on social networks.