How to set up a gps on android without internet
How to connect a navigator in your phone
Among the functions of the smartphone. Location and route guidance. One of the most frequently used. That’s why questions often arise about how to configure the navigator in the phone. In this article we will discuss the most common applications of this segment and system settings for the correct operation of the service.
The whole beauty of the navigator in full measure appears when you are in an unfamiliar area. With the help of positioning and trajectory planning system you can easily orient yourself in any city. Modern gadgets have a built-in navigation function. It only remains to install the appropriate application.
There is already a free navigator in the phone’s firmware, it is called “Maps”. If it is missing, you can download it from Play Market.
How to check if your tablet or smartphone has GPS and turn it on
The easiest way to find out if your phone has built-in GPS and turn it on is to use the special GPS Test app.
If you know that your device has it, then you can go directly to turning it on.
If you are not sure, download an app from Play Market that automatically detects the signal strength. Once installed, you should see a screen similar to the one below.
If the status window has a green icon in the upper left corner, it means that GPS is on. If the icon is red, it’s off. Then you need to turn on geo data.
The app will automatically take you to the geolocation options, where you have to turn the GPS (geo data) on. Note that the location of this menu may vary depending on the device and operating system version.
How to set up GPS on Android in your phone menu
Enabling geolocation on the phone does not in all cases allow you to immediately determine your location with the help of maps. Thus, in order for the sensor to function, it needs to be configured. Fortunately, there’s nothing complicated about performing this operation.
First, you need to turn on GPS in any of the previously suggested ways. Secondly, allow the location through different sources:
This will allow with greater accuracy to navigate on the map. Besides, it is necessary to set the permission for the sensor to work in various applications. If you do not do this, the conditional Google Maps navigation will not work.
You can set the permission for the GPS to work through the “Location” menu mentioned earlier. If necessary, it is allowed to prohibit the use of the sensor for individual programs. Here you have a full breadth of choices. The main thing is that geolocation is confirmed for all kinds of navigators.
At last it is necessary to activate GPS in the app. Open, for example, Google Maps and tap on the “Go” icon. Depending on the program you use, it may look different, but the point doesn’t change.
How Gps Works Without Internet
And now we can say that you have managed to fully configure the GPS on the phone. The service should work smoothly if a satellite is available.
Update almanacs of satellites via Engineering menu
Sometimes the GPS connection can be unstable or may not work at all. This is due to the fact that the manufacturer of the smartphone settings were made taking into account the region of production, so in our latitudes the module will not work correctly. Then there is a sense to adjust satellites for the district, to make corrections through the engineering menu. How to do it:
- Find the “Date and Time” section in the settings, deactivate the item “Time Zone by network”, in the item “Time Zone” set your own, and then re-activate “by network”.
- Next, open “Settings”, go to “Location”, activate the item AGPS (“By all sources”), then, lowering the curtain, enable “Transmission of geodata” (see “Geodata”). Above in the screenshot).
- After that, in the dialing line enter the code to enter the engineering menu ##3646633## Depending on the model of the gadget this code can be different:
If the above methods do not work and you have a smartphone based on MediaTek, you can use a special application MTK Engineering Mode, which will help you get into the engineering menu, but it will need the rights of Super User (ROOT). After starting the program, press “MTK Settings” and enter the “Telephony” entry in the engineering menu.
So, after we got into EngineerMode (engineering menu), and it does not matter which way, scroll further and go to the tab “Location”, select “Location Based Service”, this is the basic settings, from which we need to go to the AGPS tab:
Further, moving on this section, we set the settings, focusing on the screenshots, then, go to the tab GPS and also set the necessary values:
Now open the EPO tab and activate (check the boxes) in the field Enable EPO, as well as Auto Download. To make it clear, the EPO is the system file that stores both the coordinates of all the satellites and their flight paths. Now you can go back to “Location” and open “YGPS. Here we will see our GPS module with satellites in red color, it means that the module “does not see” them:
Now we need to go to the tab “Information”. Here in the line “Status” it says “Unavailable”, and the TTFF parameter, which shows the time to determine the coordinates, is in “Counting”. In this case we need to do a complete reset of the search, for this press the button “Full” and after a couple of seconds start AGPS again (button “AGPS Restart”). It turns out that by resetting the halted process we get rid of the original settings and reset the module., which as a result of this manipulation will start looking for satellites, as they say “from scratch”. Wait a few seconds, and then you can open the tab “Satellites” to see how the satellite signals appeared, and after a while the GPS-module of our smartphone will connect to them:
Important: it is better to perform manipulations not in the apartment, but outdoors.
If your smartphone is on the MTK 6592 processor, I suggest you to watch the video how to proceed in this case:
As an afterword: if you can not call yourself a confident user, but you want to configure GPS on Android through the engineering menu, it is better to trust the expert. And at this point I say goodbye to the next topic with best of luck.
Viewing the number of visible GPS satellites
In the same GPS Essentials you can see how many satellites your smartphone is connected to. If it is big enough, the navigation chip is not to be blamed. The problem is in one of the programs. To view the satellites in the menu of the application to select the Satellites.
Why do you need a geopositioning system on your smartphone??
Interaction with the GPS module, for a long time already does not limit to the mere possibility of viewing one’s location. Programmers from different services have learned to interact with received navigation data and use them in their products. Let’s look at the main applications that use location data and, most importantly, why they do it:
- Google services. Use information to track the places a person visits. A special chronology is created with division into days, which you can view or turn off in your personal profile. In this case, for convenience, actively visited addresses are marked with tags: home, work, etc.Д.
- Search for the lost device: in case of loss, the data from the smartphone is sent to the server of the company, showing the current location of the device. Read more about what to do with the missing phone, you can in the article: How to lock your phone?
- Maps and navigators are an obvious example, mapping services help route to a given point and learn about the location of interesting places nearby.
- Stores. Shopping platforms offer current offers, according to the region of residence. For example, Yandex Market automatically switches the area and shows the stores, where the goods are available according to the city.
- Social networks and dating apps. Constantly collecting information to show people the user might be familiar with. Promotional offers and posts in the “recommendations” section, 80% are collected based on location and mutual friends.
There are still a huge number of local examples, which use information from the GPS on your smartphone. So it’s hard to deny the importance of having geolocation turned on when working with software and in everyday life.
How to enable GPS positioning on Android?
Let’s look at how to find and configure the location feature on Android. Go to system settings. This can be done by tapping the gear icon in the notification bar, or, by using the separate “Settings” app.
From the list, select the “Security & Location” section. Go down to the “Privacy” section and click on “Location”.
This window is responsible for setting up and tracking all the geographic data used. To turn on the GPS features, move the slider at the top. Unlike specialized devices, there will be no questions here: “How to configure the navigator in your Android tablet or phone”. Just turn on Yandex or Google maps and lay the route.
Important: To speed up the connection to the navigation satellites, it is required to activate the parameter that increases the accuracy of. Choose “Location Detection” and give permission for more precise detection. Now mobile internet and Wi-Fi networks will be used for acceleration.
Problems with the hardware
Chinese cheap smartphones (Leagoo, Oukitel, Ulefone and others) are often equipped with poor-quality satellite modules. Replacement of the corresponding module in the service center can correct the problem. Malfunctions occur on both Android and iOS phones.
Occasionally, the internal antenna (a small thing on the board) falls off, which also affects the quality of satellite signal reception. It is difficult to repair them yourself.
When adjustment is required: Mediatek curiosity
Today the company Mediatek (also known as MTK) is one of the leaders in the production of mobile processors. Even the giants like Sony, LG or HTC create smartphones with MTK processors today. But there was a time when the processors of this Taiwanese company were used only in miserable clones of the iPhone or two-simmer “dialers.
In 2012-2014, Mediatek produced quite decent chipsets, but they constantly had a problem: the incorrect operation of GPS. Satellites with these devices behave according to the quote: “I’m hard to find, easy to lose”
5 Best Free GPS Apps For Android of 2022
It was all about setting up the EPO auxiliary service. This service, developed by Mediatek, helps to calculate in advance the orbits of navigation satellites. But here’s the trouble: the default EPO data in Chinese phones is calculated for Asia and fails when used in Europe!
It’s easy to fix in today’s models. Remember all these instructions are suitable for MTK-based smartphones only:
- Download and install the MTK Engineering Mode Start application, which allows you to enter the engineering menu of your smartphone (https://play.Google.Com/store/apps/details?ID=com.Themonsterit.Engineerstarterhl=en).
Yes, it’s not the easiest procedure. Depending on the MTK CPU version (we have described the procedure for the MT6592 platform) the procedure may be slightly different, but in essence it remains the same. But after these actions, the GPS on the smartphone will work perfectly.