How to run BIOS on Lenovo laptop

BIOS entry options on a Lenovo laptop

An ordinary user rarely needs to enter the BIOS, but if, for example, you need to update Windows or make any specific settings, then you will have to enter it. This process in Lenovo laptops may differ depending on the model and release date.

Enter BIOS on Lenovo

The newest Lenovo laptops have a dedicated button that allows you to launch the BIOS on reboot. It is located near the power button and is marked with an icon with an arrow. The exception is the Ideapad 100 or 110 laptop and similar state employees from this line, since they have this button on the left side. As a rule, if there is one on the case, then it should be used to enter the BIOS. After you click on it, a special menu will appear where you need to select “BIOS Setup”.

If for some reason this button is not on the laptop case, then use these keys and their combinations for models of different lines and series:

However, some laptops have different entry keys than those listed above. In this case, you will have to use all keys. from F2 to F12 or Delete. Sometimes they can be combined with Shift or Fn. Which key / combination you need to use depends on many parameters. laptop model, serial modification, equipment, etc.

The required key can be found in the documentation for the laptop or on the official Lenovo website by typing in your model in the search and finding basic technical information for it.

It is worth remembering that the most common BIOS keys on almost all devices are F2, F8, Delete, and the rarest ones are F4, F5, F10, F11, F12, Esc. During the reboot, you can try pressing several keys (not simultaneously!). It also happens that when loading on the screen, the inscription with the following m “Please use (required key) to enter setup” is briefly displayed, use this key to enter.

Entering the BIOS on Lenovo laptops is quite simple, even if you did not succeed on the first try, then most likely you will do it on the second. All “wrong” keys are ignored by the laptop, so you do not risk your mistake to disrupt something in its work.

Removing the battery

If the owner of a Lenovo laptop is also an extreme lover, he can enter the BIOS by partially disassembling the device case and removing the round battery from the motherboard for a few seconds. and then reinstalling it.

bios, lenovo, laptop

As a result, a minor system failure will occur, and with a high degree of probability, upon the next startup, the laptop will automatically boot into BIOS mode, without even asking for permission from the owner.

How to enter BIOS on Lenovo laptop?

An experienced user who remembers how to enter the BIOS on a stationary computer probably knows not only about the peculiarities and potential risks of the process, but also has an idea of ​​how to get out of the basic I / O system. Another question is laptops: there are countless models of them today, and almost for each the manufacturer assigns its own key combination that allows you to enter the BIOS. How to do it on Lenovo laptops. let’s try to figure it out.

Keyboard shortcuts

Fortunately, Lenovo has established a single key combination for almost all models of its laptops: Fn F2, where Fn is a special “function” button, usually located in the lower left corner.

Much less often, in order to enter the BIOS, you have to use another Fn F1 combination or just press the Delete (Del) key.

In general, the procedure for user actions is reduced to two steps:

  • Open the “Start” menu and, by clicking on the virtual power button, select one of the options. shutdown or restart.
  • Turning your Lenovo laptop back on or waiting for it to start up after restarting and using one of the above keyboard shortcuts to enter BIOS is as easy as understanding the benefits of UEFI Boot.

If everything is done correctly, the user will see the BIOS menu in front of him. Now he can configure the BIOS, set the operating system boot sequence and perform other required manipulations. if necessary, after entering the password.

Tip: If your Lenovo laptop starts up too quickly or you can’t enter the BIOS after rebooting, it makes sense to turn it off using the physical button by pressing and holding it for a few seconds.

Now, having given the Lenovo laptop a little “rest”, you should start it again. and do not forget to use one of the above combinations in time to enter the BIOS.

Shift key

By holding and holding this key (it does not matter whether it is right or left) and holding it during the reboot, you can enter the BIOS on Windows 10. in particular, on some laptop models from Lenovo. The method works quite rarely, however, you should not neglect it. at least because, holding Shift, you do not have to rush with key combinations.

NOVO button

Owners of Lenovo ThinkPad notebooks, as well as some other models, can enter the BIOS without using key combinations. just use the special NOVO button located next to the power button or on the end of the device.

After turning off the Lenovo laptop, you should press NOVO and hold it for a few seconds; by selecting the BIOS Setup item in the window that appears, the user can finally enter the BIOS. and continue working in the basic input-output system.

Tip: sometimes, instead of the NOVO button, there is a special hole on the body of the device, near which the same icon is located. In this case, you can open the BIOS menu by inserting a special paper clip for an iPhone or smartphone or a regular paper clip into the connector and lightly pressing on the contact for two to three seconds.

Firmware parameters

To enter BIOS on Lenovo laptops running “Eights” or “Tens”, you can use the built-in Windows option:

  • Open the “Start” menu and click on the gear image in the leftmost column.
  • In the “Windows Settings” window that opens, enter the “Update and Security” section.
  • Switch to the “Recovery” tab.
  • In the section “Special boot options” click on the “Restart now” button. It is important to remember: the process will start immediately and without additional prompts, and therefore, before clicking, you must close open documents, save the changes made to the system and take other precautions.
  • In the “Select action” menu, click on the “Troubleshooting” button.
  • Next. go sequentially to the subsections “Additional parameters”.
  • That’s all. it remains to click on the “Restart” button and wait until the BIOS menu appears on the Lenovo laptop screen.

Important: although, in theory, the specified algorithm should run exactly UEFI, on Lenovo laptops, the BIOS is set by default for the initial boot. In addition, even if the owner is in the “extended interface”, he will be able to perform all his tasks in it, bypassing the basic I / O system.

Summing up

To enter the BIOS on a Lenovo laptop, you need to use the Fn F2 key combination when turning on (less often. F1 or just Delete). Other options are to press the NOVO button, exit to Firmware Options, or hold down the Shift key while restarting. Finally, the owner can remove the power battery from the motherboard and then reinstall it in place. of course, it is better to turn off the laptop before this.

General information on entering the BIOS boot menu

Just as to enter the BIOS (or configure the UEFI software) when turning on the computer, you must press a certain key, usually Del or F2, so there is a similar key to call the Boot Menu. In most cases, these are F12, F11, Esc, but there are other options, which I will write about below (sometimes information about what you need to press to call the Boot Menu appears immediately on the screen when you turn on the computer, but not always).

over, if all you need is to change the boot order and you need to do this for some one-time action (installing Windows, checking for viruses), then it is better to use the Boot Menu, and not set, for example, boot from a USB flash drive in the BIOS settings.

In the Boot Menu, you will see a list of all devices connected to the computer from which it is potentially possible to boot at the moment (hard drives, flash drives, DVDs and CDs), as well as, possibly, the option to boot the computer network and start restoring a laptop or computer from a backup partition.

How to enter the Boot Menu on Lenovo laptops

For almost all Lenovo brand laptops and all-in-ones, you can use the F12 key to enter the Boot Menu when turning on.

Also, additional boot options for Lenovo laptops can be selected by clicking the small arrow button next to the power button.

The next most popular model of laptops and monoblocks with us is Acer. Entering the Boot Menu on them for different BIOS versions is carried out by pressing the F12 key when turning on.

However, on Acer laptops there is one feature. often, entering the Boot Menu by F12 on them does not work by default and in order for the key to work, you must first enter the BIOS by pressing the F2 key, and then switch the “F12 Boot Menu” parameter to the Enabled state, then save the settings and exit the BIOS.

Features of entering the Boot Menu in Windows 10 and Windows 8.1 (8)

For laptops and computers that originally came with Windows 8 or 8.1, and soon with Windows 10, entering the Boot Menu using these keys may not work. This is due to the fact that shutdown for these operating systems is not in the full sense of the word shutdown. This is more of a hibernation, and therefore the boot menu may not open when you press F12, Esc, F11 and other keys.

Read more:  Lenovo Ideapad Reinstall Windows

In this case, you can do one of the following:

  • When you select “Shutdown” in Windows 8 and 8.1, hold down the Shift key, in this case the computer should turn off fully and when you turn on the keys to enter the Boot Menu should work.
  • Restart your computer instead of turning it off and on, when restarting, press the desired key.
  • Disable Fast Startup (see How to disable Fast Startup in Windows 10). In Windows 8.1, to do this, go to the Control Panel (the view of the control panel is icons, not categories), select the “Power supply” item, in the list on the left, click “Actions of the power buttons” (even if it is not a laptop), disable the item “Turn on fast launch “(for this you may need to click” Change parameters that are currently unavailable “at the top of the window).

One of these methods should definitely help with entering the boot menu, provided that everything else is done correctly.

Other laptop and motherboard models

For other laptop models, as well as PCs with different motherboards, there are fewer features, and therefore I will simply give the Boot Menu entry keys for them in the form of a list:

  • HP AiOs and Notebook PCs. F9 or Esc followed by F9
  • Dell Laptops. F12
  • Samsung Laptops. Esc
  • Toshiba Laptops. F12
  • Gigabyte motherboards. F12
  • Intel motherboards. Esc
  • Asus motherboards. F8
  • MSI motherboards. F11
  • AsRock. F11

It seems that I took into account all the most common options, and also described the possible nuances. If suddenly you still cannot enter the Boot Menu on any device, leave a comment indicating its model, I will try to find a solution (and do not forget about the points related to fast boot in the latest versions of Windows, which I wrote about above).

How to enter the Boot Menu on laptops and computers

Boot Menu (boot menu) can be called at startup on most laptops and computers, this menu is a BIOS or UEFI option and allows you to quickly select which drive to boot the computer this time. In this manual I will show you how to enter the Boot Menu on popular models of laptops and PC motherboards.

The described feature can be useful if you need to boot from a Live CD or a bootable USB flash drive to install Windows and more. it is not necessary to change the boot order in the BIOS, as a rule, a single selection of the desired boot device in the Boot Menu is enough. On some laptops, the same menu gives access to the recovery section of the laptop.

First, I will write general information on entering the Boot Menu, nuances for laptops with Windows 10 and 8.1 preinstalled. And then. specifically for each brand: for Asus, Lenovo, Samsung and others laptops, Gigabyte, MSI, Intel motherboards, etc. At the bottom there is also a video showing and explaining the entrance to such a menu.

Entering the Boot Menu on Asus (for laptops and motherboards)

For almost all desktops with Asus motherboards, the boot menu is entered by pressing the F8 key after turning on the computer (at the same time when we press Del or F9 to enter BIOS or UEFI).

But with laptops, there is some confusion. To enter the Boot Menu on ASUS laptops, depending on the model, you need to press when turning on:

  • Esc. for most (but not all) modern and not so models.
  • F8. for those Asus laptop models whose name begins with x or k, for example x502c or k601 (but not always, there are models on x, where you enter the Boot Menu by pressing the Esc key).

In any case, there are not many options, so you can try each of them if necessary.

Removing the battery

If the owner of a Lenovo laptop is also an extreme lover, he can enter the BIOS by partially disassembling the device case and removing the round battery from the motherboard for a few seconds. and then reinstalling it.

As a result, a minor system failure will occur, and with a high degree of probability, upon the next startup, the laptop will automatically boot into BIOS mode, without even asking for permission from the owner.

Common ways to sign in on a Lenovo laptop

The most common and well-known way to enter the BIOS is by pressing the Delete key on the keyboard. However, some computer and laptop manufacturers, including Lenovo, have defined other login methods for their systems.

When choosing a Lenovo manufacturer when purchasing, you need to remember that the computer equipment of this company is produced, as a rule, with an already installed operating system. If you want to reinstall the software on your laptop, you may face a problem: almost all modern models ignore the operating system you want, trying to return the computer to the original one. For this, you will need the ability to enter the BIOS on your own in order to get around this problem.

Depending on the Lenovo model, you can enter the BIOS in several ways:

  • press and hold the F1 or F2 keys;
  • press the DELETE button;
  • press the Novo Button.

Almost all modern Lenovo laptops have a Novo Button on their panel or side edge. Finding it is not difficult. The manufacturer highlighted it with the appropriate pattern. a curved arrow.

If you need to get into the BIOS on a Lenovo laptop, then instead of the power button, you need to press the Novo Button. At boot, the system will enter BIOS.

Please note that the BIOS will not appear on the monitor immediately. To enter the program, you need to perform one more step. find in the “Novo Button” menu the option to boot the laptop “BIOS Setup”, which is selected with the mouse button. After selecting, press the Enter key on the keyboard. You are logged into the software.

Summing up

To enter the BIOS on a Lenovo laptop, you need to use the Fn F2 key combination when turning on (less often. F1 or just Delete). Other options are to press the NOVO button, exit to Firmware Options, or hold down the Shift key while restarting. Finally, the owner can remove the power battery from the motherboard and then reinstall it in place. of course, it is better to turn off the laptop before this.

Thank the author, share the article on social networks.

Lenovo is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Lenovo equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process, the question is raised: how to enter Lenovo BIOS?

First, you need to figure out what BIOS is and what it is eaten with. So, the BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and the OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is on any computer, be it Lenovo B560, Lenovo S21 or M5400.

To date, several different versions of Bios have been created, which differ slightly in appearance, but as for the functions, everything is identical here. Each of the versions is used for the initial setup of the computer and for testing it. The BIOS functionality includes:

  • Date and time setting;
  • Selecting the boot sector. the device from which the operating system will be installed or loaded;
  • Checking system components, including checking the health of RAM and hard drives;
  • Connection protection. password on your laptop to protect personal data.

Every novice user should understand that the BIOS software is the system by which the basic settings for the fast and functional operation of the laptop are set. And therefore, changing them, you must clearly understand what exactly you are doing. It is better for unsure users to consult with a specialist or entrust him with testing a laptop.

Keyboard shortcuts

Fortunately, Lenovo has established a single key combination for almost all models of its laptops: Fn F2, where Fn is a special “function” button, usually located in the lower left corner.

Much less often, in order to enter the BIOS, you have to use another Fn F1 combination or just press the Delete (Del) key.

In general, the procedure for user actions is reduced to two steps:

  • Open the “Start” menu and, by clicking on the virtual power button, select one of the options. shutdown or restart.
  • Turning your Lenovo laptop back on or waiting for it to start up after restarting and using one of the above keyboard shortcuts to enter BIOS is as easy as understanding the benefits of UEFI Boot.

If everything is done correctly, the user will see the BIOS menu in front of him. Now he can configure the BIOS, set the operating system boot sequence and perform other required manipulations. if necessary, after entering the password.

Tip: If your Lenovo laptop starts up too quickly or you can’t enter the BIOS after rebooting, it makes sense to turn it off using the physical button by pressing and holding it for a few seconds.

Now, having given the Lenovo laptop a little “rest”, you should start it again. and do not forget to use one of the above combinations in time to enter the BIOS.

Booting Lenovo laptop from USB flash drive via BIOS

Most often, this operation is performed by specialists in order to cure a laptop from viruses. Various software is written to removable media, but booting from it is usually not so easy. The problem is that all the latest Lenovo laptop models from the 2013 release have UEFI BIOS software that has Secure Boot certified security keys. They allow you to boot a laptop only when using a licensed Windows 8 installation disc.

In order to boot from the media in such a BIOS, you must disable Secure Boot in it by following these steps:

  • Immediately after turning on the laptop, press two Fn F2 keys on the keyboard or use the BIOS entry through the Novo Button.
  • After entering the “InsydeH20 Setup Utility” (as a rule, in all the latest Lenovo models it is installed), go to the “Security” section.
  • Then select “Disabled” in the “Secure Boot” item, thereby disabling the security protocol.
  • In the appropriate section “Boot” change the installed parameter “UEFI” to “Legacy Support”.
  • Save your changes by going to the “Exit” section and selecting the “Exit Saving Changes” option. From the options offered by the computer, select “Yes” and wait until the reboot occurs.
  • We insert the removable media into a free USB-input and again get into the BIOS by pressing the keys necessary for this Lenovo model.
  • In the “Boot” section we see the appeared USB flash drive. As a rule, it is registered in the menu as a USB HDD. By simultaneously pressing the Fn F6 keys, we determine the media as the first in the list of devices to boot the system.
  • We repeat the actions described in paragraph 5.
Read more:  How to Unlock Lenovo Phone PIN Code

After all the steps taken, the laptop will start the next boot from the USB flash drive.

Please note that for some Lenovo models, disabling just one Secure Boot setting may not be sufficient. You may need to enable Compatibility Mode to boot the system from removable media.

In various models, it can be called as CSM OS, CSM Boot, Legacy BIOS, UEFI and Legacy OS, or simply CSM.

NOVO button

Owners of Lenovo ThinkPad notebooks, as well as some other models, can enter the BIOS without using key combinations. just use the special NOVO button located next to the power button or on the end of the device.

After turning off the Lenovo laptop, you should press NOVO and hold it for a few seconds; by selecting the BIOS Setup item in the window that appears, the user can finally enter the BIOS. and continue working in the basic input-output system.

Tip: sometimes, instead of the NOVO button, there is a special hole on the body of the device, near which the same icon is located. In this case, you can open the BIOS menu by inserting a special paper clip for an iPhone or smartphone or a regular paper clip into the connector and lightly pressing on the contact for two to three seconds.

NOVO button

One of Lenovo’s proprietary developments is Lenovo OneKey Recovery software, a system for backing up and restoring data on computers manufactured by the manufacturer. To start the system, a special hardware button is used, which even has its own name. “Novo”. Almost all relatively new laptop models are equipped with this button.

The solution can be made in the form of a key and located near the power button, or on the side edge of the laptop case near the connectors for connecting peripheral devices.

Also in the new models there is a design in the form of a small hole in the computer case. A small switch is hidden inside the hole. In this option, a paper clip or other thin, but not sharp object is used to press.

Despite the fact that calling BIOS settings is not the main function of the “NOVO” button, its use for solving this problem is very convenient and quite justified.

  • Turn off the laptop completely by holding the power button for at least 10 seconds.
  • Press the “NOVO” button for 1-3 seconds and release it.
  • The laptop will start and a small window with a selection of functions will be displayed on the screen.

Select the “BIOS Setup” item using the arrow keys on the keyboard and press the “Enter” key.

Keyboard shortcuts

The most common and frequently used way to enter BIOS settings is by pressing a certain key or key combination on the keyboard, immediately after turning on the device. On the switched off laptop, the power button is pressed and, almost immediately, we press one of three options:

  • In very rare cases, on older Lenovo notebook models, the F1 key is used.
  • How to run BIOS on Lenovo laptop

    Almost every user of a modern laptop at least once during the operation was faced with the need to enter the BIOS. Users of Lenovo solutions did not stand aside either. The manufacturer has a very wide range of laptop computers, which entails a variety of methods for performing certain operations, including procedures for entering BIOS settings. Let’s try to collect all the ways together.

    When does it become necessary to enter BIOS on a laptop? While Lenovo strives to provide its users with a superior product that requires a minimum level of service and hardware configuration knowledge from the user, it is important to understand that no laptop is immune to the sudden onset of critical errors and crashes. At such moments, you may need to adjust the parameters.

    If we disregard the idle curiosity of some owners, then entering the settings of the basic I / O system is a necessity when:

    • enable / disable certain hardware components (touchpad, network card, USB controller, sound processor, etc.);
    • configuring the operating modes of the disk subsystem;
    • choosing boot options for devices and operating systems;
    • diagnostics of hardware components;
    • setting many other specific parameters (depending on the specific configuration of the device) of individual components and the entire system as a whole.

    Reset

    This way of entering BIOS is quite cardinal. It can be recommended only for experienced users, as it implies opening the laptop case, and in some cases its complete disassembly.

    The method is as follows. In order to reset the BIOS settings, you need to disconnect for a while a special CMOS battery connected to the laptop motherboard. After resetting the settings, the system will “understand” that the parameters may be set incorrectly and will offer to enter the BIOS for configuration, or will open the settings screen automatically.

    A laptop CMOS battery usually looks something like this:

    But there may be options:

    In addition to the various types of batteries used, it is also worth noting the lack of standardization in the location of the battery on the motherboard. Quite often, you can access the battery just by opening the cover of the hard drive bay:

    But there are also common cases in which to access the battery you will have to disassemble the laptop almost completely and even remove the motherboard:

    In general, the methodology of the method is as follows:

    • Disconnect the laptop from the power supply, remove the battery.
    • We get access to the battery and disconnect it from the laptop motherboard.
    • We are waiting for 10-15 minutes.
    • We connect the battery in place, assemble the laptop, connect the power and start the device.
    • If successful, a screen will appear prompting you to enter the BIOS, or the settings window will automatically open.

    Windows 10

    In the newest version of the Windows operating system, the ability to reboot to UEFI using the “Special Boot Options” screen was inherited from Windows 8. Only the “Computer Settings” window is opened differently.

      Press the Settings button in the Start menu.

    Or open the notification panel by clicking on the icon in the lower right corner of the screen and press the button “All parameters”.

    In the “Windows Settings” window that opens, select “Update and Security”.

    In the next window, go to the “Recovery” tab and click the “Restart now” button in the “Special boot options” section.

    A reboot takes place, and we get to the “Select action” screen.

    Optional: For a quick reboot to the diagnostic and system recovery screen, you can use the command line (this method works in Windows 8 / 8.1 as well).

      We launch the command line on behalf of the Administrator by right-clicking on the “Start” button and from the menu that opens, selecting “Command line (Administrator)”.

  • A reboot will occur within 60 seconds.
  • Further, by analogy with the steps in Windows 8: “Troubleshooting”. “Advanced Options”. “UEFI Firmware Options”. “Restart” button.
  • Common mistakes when using the method

    If the window with a choice of functions does not appear, you should make sure that the device has been turned off completely. You can remove and install the laptop battery back if it is removable. In addition, you should not “overexpose” the “NOVO” button, or vice versa, “do not press”. One short but firm press with a slight delay.

    Laptops from Acer

    Another popular manufacturer of mobile computers. The devices of this company can boast not only high performance, but also an elegant appearance. The company’s ultrabooks are especially popular. Therefore, it makes sense to analyze the question of how to run the BIOS on these laptops. In older versions of laptops, you often need to press the F1 key. The Ctrl Alt Esc combination may also work. As for the relatively new models, there are several options for entering the BIOS. You need to hold down the F2 or Del button. If you are not sure which generation you have, then you can experiment by healing all the above keys in turn. Something will definitely work. Consider laptops from another well-known manufacturer. They are also popular in the domestic market.

    ASUS Laptops

    ASUS makes good devices: powerful, beautiful and easy to use. But how to run BIOS on ASUS laptop? It all depends on the specific model. ASUS Transformers, for example, require you to press the F2 button on a physical keyboard. It is worth noting that the laptop must be turned off. You need to press and hold F2 and at this moment press the power button. Keep F2 pressed until the BIOS menu appears on the screen. Some ASUS laptop versions require slightly different steps. When you turn it on, you need to hold down the Esc button and wait until the boot menu appears. In this menu, select the “Enter Setup” item. After that, the BIOS of the device will be loaded. As you can see, even laptops from the same manufacturer can have different keyboard shortcuts for entering BIOS. But it’s pretty easy to do it if you know exactly how. The answer to the question on how to run BIOS on ASUS has been received. Now let’s move on to devices from other manufacturers.

    Hewlett-Packard

    HP notebooks are popular with many users around the world. How do I run BIOS on these laptops? For Pavillion series devices, you need to hold down F1 when the company logo appears on boot. In the Tablet PC line, the F12 or F10 button is required. But there is one peculiarity. For some reason, it is in the laptops of this company that the BIOS has the most complex and incomprehensible structure. Therefore, you need to delve into the settings of this laptop with extreme caution. There is one more peculiarity of entering BIOS. And it is not connected with the manufacturer of the device, but with the installed operating system. It is necessary to analyze in detail the moment when using “Windows 8” and above. Since the process is significantly different from that when using the classic “seven”.

    Lenovo Laptops

    The Chinese manufacturer is gradually conquering the mobile computer market. He makes powerful and quality devices and sells them at a reasonable price. Therefore, they are widespread in Russia and the CIS countries. So how do you run the BIOS on a Lenovo? It also depends on the specific laptop model. B series laptops require you to hold down the Enter button. There is also an option with pressing the F12 button. This action will enable the boot menu. There you just need to press the F1 button. This action will launch the BIOS menu. Thinkpad and Ideapad models require F1 and F2 respectively. In general, it is not difficult to enter the laptop BIOS. The main thing. don’t get lost among the many settings and choose the right parameters. But that’s a completely different story. Now you know how to run BIOS on Lenovo. So let’s move on to models from other manufacturers.

    Read more:  Lenovo Ideapad How to Repair Windows 8

    What is BIOS?

    BIOS (from the English BIOS). it is the basic I / O system. Basically, this is the firmware of the computer’s motherboard. A kind of graphical interface that allows you to configure some of the parameters of the machine. Or rather. installed equipment. There are several sections in the BIOS structure. They are all responsible for specific equipment. All items are spelled out in English. However, it is not difficult to understand what’s what, because the terms are all familiar. BIOS settings greatly affect the overall performance of the computer. Unknowingly, there you can wind up such that the PC will refuse to work at all. The good thing is that you can easily reset the settings to the factory defaults. But first you need to understand how to run BIOS on a laptop. Most manufacturers have their own recommendations in this regard. There is no universal key. Therefore, it is required to disassemble all possible options with laptops from different companies. So, let’s begin.

    Features of different Windows versions

    The trouble is that different versions of the operating system use different boot parameters. If the user knew how to run the BIOS on Windows 7, then with the “eight” he may have certain difficulties. The fact is that the G8 can use UEFI mode by default. And he does not allow you to just enter the BIOS. You need to select the “Options” menu in the loaded operating system and go to the “Recovery” sub-item there. Here you need to select the “Special download options” item. It will read “UEFI Firmware Settings”. It also needs to be pressed. After that, you need to restart your laptop. If the operating system does not load, then in the command line when booting the computer, you need to type the command “shutdown.exe / r / o”. It will reboot the PC and allow the device BIOS to start. The situation is exactly the same with “Windows 10”. In general, Secure Boot is a lot of hassle. And its use is completely unjustified, since there can be no talk of any security. It’s Microsoft. Their operating systems are a priori full of holes and vulnerabilities. Older laptop models have the option to disable UEFI and Secure Boot. But the owners of new models are doomed to use non-standard ways to enter BIOS.

    How to run BIOS on a laptop?

    Computer equipment is characterized by stability, which cannot be said about operating systems (especially the Windows family). Sometimes the user has to reinstall the OS. And then it is simply vital for him to learn how to run the BIOS on a particular laptop or personal computer. It is worth noting that the login options differ on different machines. It all depends on the developers of this or that BIOS. We will certainly analyze the ways to log in on different laptop models. But first, some general information.

    How to update BIOS on Lenovo laptop

    The BIOS on a laptop is a set of programs that are stored in the computer’s memory. They perform several functions at once: testing computer components at the moment of turning on, loading the OS into memory. You should not change the BIOS settings if you have no idea what this or that parameter is responsible for. Today we are going to talk about whether it is worth updating the BIOS on a Lenovo laptop and how to do it.

    When to update BIOS?

    If the computer is operating normally, then the BIOS does not need to be touched. Installing an update may not bring benefits, but additional problems. Previously, the process of updating this component was quite difficult (it was necessary to use DOS), but now there are special utilities that allow you to update the software version in just a few clicks.

    You should update the BIOS on a laptop only if:

    • During the operation of the computer, various errors occur, and they are fixed in the new BIOS version (the list of changes is usually available on the official website of the manufacturer).
    • There was a need to install new equipment. Periodically, some manufacturers add support for new components (processor, etc.) to the BIOS.

    The BIOS update process may differ for each computer, so there is no single instruction. If you install the wrong update, you may experience serious system problems. That is why you need to carefully read the information on the manufacturer’s website and install the new version only if it is really necessary.

    How to update BIOS?

    In order to update the BIOS version, you need to go to the manufacturer’s website. Further steps may differ, since the official resources of popular brands have a different structure. Let’s consider the process of updating drivers for BIOS using Lenovo as an example.

    • Go to support.lenovo.com, select “Laptops” from the list. Specify series and model.
    • On a new page, scroll to the list of components, then select the BIOS driver from the drop-down list.
    • See the list of drivers, their release date, version and changes (you need to open the Readme for this).
    • On the computer, using the search in the “Start” menu, start the msinfo program In the window that opens, find the BIOS version and compare it with the version on the website.
    • If an old assembly is installed on the laptop, then you need to download the file from the official Lenovo website, run it and follow the instructions.
    • After the installation is complete, the computer will reboot, then you need to go to the BIOS menu, load the default setting, save, exit and restart the system again.

    The update process is quite simple, but it is still worth noting once again that you only need to update the BIOS if you need to add support for new devices or fix errors.

    Downloading the updater

    Now let’s proceed directly to the update. First you need to download and prepare the required files. All actions are carried out in special auxiliary software from Lenovo. You can download it to your computer like this:

    • Use the link above or through any convenient browser to go to the Lenovo support page.
    • Scroll down a bit to find the Drivers and Software section. Then click on the “Get Downloads” button.

    In the line displayed, enter the name of your laptop model. If you do not know it, pay attention to the sticker on the back cover. If it is erased or you cannot read the inscription, use one of the special programs that help you find out basic information about the device. Check out the best representatives of such software in our other article at the link below.

    Among the list of drivers and software, find the “BIOS” section and click on it to open it.

    Click on the name “BIOS Update” again to view all available versions.

    Find the latest build and click on “Download”.

    Wait for the download to finish and run the installer.

    It is better to start and further actions under the administrator account, therefore we strongly recommend logging in under this profile, and only then proceed to the next step.

    Updating BIOS on Lenovo laptops

    Almost all current laptop models from Lenovo are updated in the same way. The whole procedure can be conventionally divided into three steps. Today we will take a closer look at each action.

    How to enter the BIOS on most Lenovo ThinkPad laptops. The easy way!

    Before starting the process, make sure the laptop is connected to a good power source and the battery is fully charged. Any even slight fluctuation in voltage can provoke malfunctions during the installation of components.

    Updating BIOS on Lenovo Laptops

    BIOS is a collection of programs that are stored in the memory of the motherboard. They serve for the correct interaction of all components and connected devices. The BIOS version determines how correctly the hardware will function. From time to time, motherboard developers release updates to fix problems or add innovations. Next, we will talk about how to install the latest BIOS for Lenovo laptops.

    Preparation

    It is imperative to prepare for the update. You are required to do the following:

    • Find out the current version of your BIOS to compare it with the one on the official website. There are several methods for determining. Read more about each of them in our other article at the link below.

    Disable your antivirus and any other security software. We will only use files from official sources, so do not be afraid that malicious software will get into the operating system. However, the antivirus can react to certain processes during the update, so we advise you to turn it off for a while. Check out the deactivation of popular antiviruses in the material at the following link:

  • Reboot your laptop. The developers strongly recommend that you do this before proceeding with the installation of the components. This may be due to the fact that now the laptop is running programs that can interfere with the update.
  • Setup and installation

    You now have an official utility loaded on your computer that will automatically update the BIOS. You just need to make sure that all the parameters are correct and, in fact, start the process of installing the files. Perform the following manipulations:

      After starting, wait until the end of the analysis and preparation of components.

    Make sure that the marker is marked “Flash BIOS only” and the specification of the new file is saved in the system partition of the hard disk.

  • Do not perform any other procedures on the computer during the upgrade. Wait for success notification.
  • Now restart your laptop and enter BIOS.
  • In the “Exit” tab, find the item “Load Setup Default” and confirm the changes. This will load the basic BIOS settings.

    lenovo boot key & Bios Setup

    Wait for the laptop to restart. This completes the update procedure. Only then you can return to the BIOS again to set all the parameters there for yourself. Read more in an article from another of our authors at the following link:

    As you can see, there is nothing difficult about installing a new BIOS version. You just need to make sure that the parameters are correct and follow a simple guide. The process itself does not take much time, and even a user who does not have special knowledge or skills can handle it.