How to reset your Samsung Smart TV
For the parameters to be automatically reset, you need to follow the same principle as in the step-by-step instructions for the J series models.
- Take your remote control.
- Press the “Menu” button.
- In the menu that opens on the screen, select the “Settings” section.
- Go to the “Support” tab.
- Click on the “Self-diagnosis” command.
- From the offered list you need to select “Reset“.
- Enter PIN and press yes.
When turned on, you will notice that the parameters you set have been erased.
On J-series vehicles, released in 2015, to reboot, you must:
- press “Menu” or “MENU / 123” on the control panel;
- go to the “Settings” tab;
- open the “Support” tab, after. “Self-diagnosis”;
- click “Reset”;
- specify the PIN-code, click “Yes”;
- wait for the TV receiver to reboot.
As practice shows, the rollback to the default values on all Samsung TVs is approximately the same. The only difference is in the names of the menu items. Now we will determine how to reset the settings on a Samsung D series TV.
First you need to open the TV section, then press the “Exit” button on the remote control. Hold this key for about 10 seconds. This will open a new dialog box. The alert text indicates that all default values will be restored. This applies to both the parameters of the TV itself and Smart TV. To start the reboot, click on the “OK” button.
First, experts strongly recommend updating your Smart TV, if the error persists and the TV reboots randomly, then reset your user settings.
M, Q and LS series
- Press the “Home” button.
- Select the “Menu” section.
- Go to the subsection “Settings”.
- Switch to the “Support” tab.
- We select the command “Self-diagnosis”, and then “Reset”.
Before you can return to the default settings, you need to specify the PIN.
Use the remote to access the TV options menu. On the left side of the screen, you will see an option called By pressing this button, you will go to the support menu. there you need to activate the automatic diagnostic mode. Next, you will need to select the function of resetting the settings and also activate it. After that, the parameters entered earlier will be reset to the original factory settings.
How to restart a Samsung TV
To adjust the operation of Samsung equipment, you need to know the series and model of the device. This process is performed differently on different devices.
- For some D-series models, to restore their settings, press and hold the Exit button on the remote control for ten seconds to enter the reboot menu. If the actions are performed correctly, a window will appear on the screen, notifying about the start of the function of reloading the parameters to the default values. You need to click “OK” to confirm the action. If this method does not work, go to the “Menu” by clicking on the corresponding button on the TV remote control. Here you should select the “System” section, then. “PlugPlay”. Click “OK”, enter the pin code (by default. “0000”, if the user has not changed it to his own). Parameters will be restored to factory defaults.
- To reboot the E, H and F series TVs, you need to click on the “Menu” button, go to the “Support” tab, and from there. to the “Self-diagnosis” section. Now you should click on “Reset”, after which the TV receiver will prompt you to enter a pin code to continue the task. As soon as the numbers are specified, a message will appear on the screen, notifying about the reset of the parameters. You need to click “Yes” to confirm the action. If you need to restore the parameters of not the entire TV receiver, but only the Smart TV menu, you need to press the “Smart” button on the remote control and select “Reset”. Then dial the pin code and select “Ok”. The TV receiver Smart Menu will be reset.
- You can reload J, K, M, Q or LS series vehicles in the following way. It is necessary from the remote control by pressing the “Home” or “Menu” key to open “Settings”, then. “Support”, then “Self-diagnosis” and press the “Reset” button. Now you need to dial the pin code and select “Reset” or “Yes”, depending on the series. After these steps, the TV restarts, turns off and restarts with the factory settings restored. Depending on the TV series, the items on the screen may differ slightly in their names, but the general meaning will remain the same.
Using the remote control, you need to open the TV menu and go to the settings options. Find the “Support” feature. If you select the “Self-diagnosis” option, then you will be taken to a new menu, where from the list that appears, you need to select the reset function.
To activate this option, you must enter a digital code on the control panel, which consists of 4 zeros.
After entering this code, your TV will start updating in automatic mode, and all manual parameters you entered earlier will be deleted.
How to reset Samsung Smart TVs
In rare cases, we may need to reset the LCD TV settings to the factory settings or “Default” settings. This can be done by resetting with the remote control.
Basically, on all modern Samsung TVs, the reset is the same. The only thing that may be different is some of the names of the menu settings.
Consider the process of resetting the settings to factory settings using the example of a Samsung TV from the D series.
Using the remote control, go to the TV section. To do this, press the “EXIT” key on the remote control. We hold it for up to 7-10 seconds.
After holding down the key, a new window will appear. See the photo below.
The window that opens offers the opportunity to restore all default settings, both the general TV menu and the Smart TV and Smart Hub settings. To do this, you just need to click and confirm the “OK” button.
In some Samsung F, H series models, this key does not work. Therefore, owners of LCD TVs of this series, in order to reset the settings to the factory settings, will need to do the following manipulations.
It is necessary to press the “MENU” button on the Samsung TV remote control and go to the “Support” section of the menu.
After that, select the subsection of the menu “Self-diagnosis”.
Next, you need to select the “Reset” menu item. You will be required to enter a security PIN. The default is 0000. A reset warning window will appear. We agree with him and press the screen key “Yes”.
There is a similar option on D series TVs.
We also press the “MENU” button on the remote control. Then go to the “System” section of the menu. Go to the “Plug Play” subsection.
Press the “OK” button. In the window that appears, enter the security PIN. Settings will automatically reset to factory defaults.
After that, it will be possible to re-configure the TV from setting the time, country, setting up TV channels, video, audio and others.
The next step for a factory reset is to go to Smart Hub. Press the “Smart” button on the remote control.
Next, select the settings section by pressing the blue key on the remote control. See the photo below.
Next, in the window that appears, select the “Reset” section. Look at the image above. this section is the second in the list. Again, enter the default password 0000. After that, the remaining settings will be reset.
Smart TV will reboot. After restarting, you can see that all the widgets that you previously installed will be removed.
If you now try to log in under the “Develop” account, we will see a window that will indicate that the account will need to be created anew. In this case, you will need to re-accept the terms of the service agreement.
After that, the services will be updated and the services and widgets will be installed.
Factory reset using Smart Hub
- In the settings window that opens, select the “Reset” section.
- In the same way as in the methods above, enter the PIN code by default. it’s four zeros.
- After confirming your actions by clicking the “Ok” section, the settings will be automatically reset and the TV will reboot.
After this procedure, all widgets will be deleted, the settings will be updated, and the account will have to be created anew.
We hope you were helped by one of our suggested options to return your Samsung TV to factory settings.
You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.
Engineering (system) reset of all settings in Samsung TVs.
Consider a solution to the problem when resetting the installed settings in the TV to factory settings does not help. That is, after a reset, some settings remain in place.
In this case, the so-called engineering or system reset can help us. It is done the same on different Samsung TV models.
There are two options for this reset. Let’s get to know them.
Turn off the TV with the remote control. The TV will only be plugged in. When the TV is turned off, you will need to quickly and consistently press the following buttons on the remote control.
1st option: press the buttons “INFO”, “MENU”, “MUTE”, “POWER”.
2nd option: press successively buttons “MUTE”, “1”, “8”, “2”, “POWER”. See image below.
After dialing a combination of these buttons, the TV turns on and the following menu appears on the screen, as in the image below.
Here we select the first menu item “Option”. Press the “Enter” button on the remote control.
Let’s move on to the next window. In it we are interested in the “Factory Reset” subsection. This is the top line. See image below.
Press the “Enter” button on the remote control twice. All previously set TV settings will be completely reset.
Then the TV will start after such a reset from scratch, with the installation of the general initial settings. the menu language, country network settings, etc.
Next, you will need to configure the channels and so on. Detailed lessons on such a TV setup are available on the network.
When accessing the Smart TV menu, we will make sure that all installed settings, widgets have disappeared. Have to accept the service agreement again.
Next, you will need to restore Samsung and Smart TV accounts.
You will also have to go through the standard procedures for all updates, create a Develop account. A lesson on creating an account also exists on the net.
Recall that before performing such a system reset, try first performing a standard factory reset. If this does not help, then you can turn to this option.
Instructions on how to reset general settings, Smart TV and Smart Hub on Samsung TVs
Before proceeding with the description of the steps for resetting the settings to the factory level, we must warn you that there must be good reasons for such a decision. If you understand the seriousness of this procedure and its consequences, then follow our recommendations. We’ll show you how to completely reset your Samsung TV (D, H, F series).
ATTENTION. If you have any questions about the operation of your device, contact an experienced technician for advice or professional repair of Samsung TVs.
Reset to Reset on Select D Series Models
It should be noted that on some D-series TVs, which we talked about earlier, resetting the settings to the factory level also occurs similar to the previous one, but there are minor differences. If necessary, you can consult the Samsung helpers service center by leaving a request on the website. So, if you have a Samsung TV (D series), however, by the very first method that we described, you could not reset the settings on it, it is likely that you need to go the other way:
- Take the remote to your TV and press the “Menu” button on it.
- After that go to “System”.
- Then you will need to select the “Plug Play” option from the proposed list. Confirm the selection of this item with the appropriate “Ok” button.
- When you do all this, a window will pop up in front of you in which you will need to enter a pin code. Once you enter this code, all settings on your Samsung TV will automatically reset to factory defaults.
Reset settings on Samsung D series TVs (not all models):
- If you did everything correctly, then such a window will appear in front of you.
- In this window, you can reset absolutely all settings to the original level, and in the menu, you can reset not only the general settings of your TV, but also the Smart TV and Smart Hub settings. To reset all previously set settings, it will be enough to press the “OK” button.
Reset settings on Samsung TVs (H, F series)
With this simple procedure, you can reset the settings only on Samsung TVs that belong to the D series, but not on all of their models, but we will talk about this later. If your TV is an H or F series, this procedure will not help. Owners of TVs of these series, in order to reset the settings to factory settings, you need:
- After that, go to the “Support”.
- And select the “Self-diagnosis” tab in it.
- After these steps, you click on the “Reset” section.
- Please note that for this you will need to enter a pin code. Note that the standard pin code consists of four zeros, but if you changed it for various reasons, you will need to enter the code that you asked.
- After you enter the correct PIN code, a warning will appear on your TV screen that all settings will be reset to the original level. If you agree with this, then just click “Yes”.
Signs and Causes of Software Failures
There are a number of reasons that can lead to software glitches. The first of them is changing an outdated firmware version to a new one. This usually indicates the unsatisfactory quality of the installed software. In this case, it is enough to update the version to the latest one when it appears. But sometimes, when downloading, the connection is broken, or the user installs the wrong firmware from third-party developers. The result of such actions is a system failure.
A drop in voltage is the next reason why the TV receiver does not work or is not functioning properly. This happens if the equipment is not connected to a voltage stabilizer or at least to a surge protector. Then software failures are the least consequence of a surge in electricity, in the worst case, the TV receiver can burn out.
Children’s pranks, as well as incorrect user actions are another likely cause of system failures that cannot be fixed. In some cases, resetting the remote control, carried out by removing the batteries, and then reconfiguring the TV receiver, helps. But often the parameters of the equipment are so knocked down that the problems can be eliminated only by restarting the TV to the factory settings.
Improper installation of applications or loading widgets from unverified sources is the next reason that the TV is frozen or shows other signs of unstable operation.
How to Factory Reset Samsung Smart TV Fix it Now
As a result of these and other reasons, the TV panel works so badly that the only solution to the problem is to reboot it or, in other words, reset it to factory settings. This is an extreme measure, and after it you will need to re-configure the Smart TV receiver for yourself: log in, search and sort channels, activate pre-installed and install additional applications, and so on.
Reboot different Samsung Smart TV series
The owners of Samsung Smart TV panels sometimes notice that the equipment does not work correctly: applications and the operating system freeze are detected, errors appear on the screen and other atypical phenomena occur. If the self-diagnosis function is not available or does not produce results, then the problem is not at the hardware level, and in order to solve the problem, you should restart the Samsung Smart TV. In most cases, after the procedure, all software-related glitches are completely eliminated. How to correctly reboot Samsung TV receivers of different series will be described step by step in our material.
The reboot process for K series TVs released in 2016 includes a number of the following manipulations:
- selection on the remote control “Menu” or “Home” (depending on the model);
- entrance to the “Settings” section;
- go to the “Support” tab;
- selection of “Self-diagnosis”;
- clicking on “Reset”;
- PIN-code input;
- clicking “Yes” to confirm the execution;
- waiting for the end of the automatic reboot of the TV set.
Reload algorithm for different series
The steps you need to take to reset your Samsung equipment may differ depending on the year of manufacture of your TV receiver. You can determine when the device was produced by its labeling. So, in the name of the model, for example, UE46F6400, the letter U means the type of screen. LED, 46. the diagonal, F. the year of manufacture (2013). The first digit after the letter F is 6, it means 6 series of the TV. The more technologically advanced the device, the higher the serial number of the series (4, 5, 6, 7, 8, 9). It does not affect the reboot process.
Resetting the TV set is performed using the remote control. Without a remote control, the procedure can be performed only on those Smart TVs that can be controlled from a smartphone (through a special application). On older versions of TV receivers, access to the menu is available using the control buttons on the case, but on new devices this is not possible.
M, Q and LS series
TV sets of the M, Q and LS series were released in 2017. A complete reset of the settings to the factory settings on them like this:
- from the remote control by pressing the “HOME” button, you need to select the “Settings” section;
- then you need to open the “Support” tab;
- then you need to go to the “Self-diagnosis” section and click “Reset”;
- there you need to enter the PIN code;
- at the end, press “Reset” again and wait for the device to reboot.
Procedure for 2014 H Series TV Panels:
- press “Menu” (or “Keypad” on the remote control and select “Menu” on the device screen);
- alternately open the tabs “Support” and “Self-diagnosis”;
- select “Reset”;
- enter the PIN code;
- confirm the action by clicking “Yes”.
Then you also need to wait until the equipment turns off, and then turns on again, and start tuning.
For 2013 equipment of the F series, RESET is carried out as follows:
- on the remote control you need to press “Menu” (or “” and select “Menu” on the display of the TV set);
- then you need to open the “Support” tab, and then. “Self-diagnosis”;
- then you should press “Reset” and specify the PIN-code;
- the last step is to click “Yes” to approve the action.
How to Factory Reset (Back to Original Settings) on Samsung Smart TV
That’s all. you need to wait until the process is completed and the subsequent reboot of the device, and then start setting up the TV receiver again.