How to Reset Password on Phone If I Forgot

Find out what to do if you forget your iPhone’s password or if you see an iPhone disconnect message.

If you enter the wrong password several times in a row, a message appears informing you that the device has been disconnected. If you cannot remember the password, you will need to erase all data from the iPhone, along with the settings and password.

If you backed up your iPhone, you can restore data and settings after restoring your iPhone. If you have never backed up your iPhone device data before you forget your password, you won’t be able to save data to iPhone. To remove a password, follow these steps:

Delete password code on iPhone X or later, iPhone SE (2nd generation), iPhone 8 and iPhone 8 Plus

1. Make sure your iPhone is not connected to a computer.
2. Press and hold the side button and one of the volume buttons until the “Turn off” slider appears. Move the slider to turn off the iPhone. While holding the side button, connect the iPhone to the computer. Hold the side button until the recovery mode screen appears.
3. If you have a backup of your iPhone data, after deleting the password, restore the data and settings.

Password Removal for iPhone 7 and iPhone 7 Plus

1. Make sure your iPhone is not connected to a computer.
2. Press and hold the side button until the “Turn off” slider appears. Move the slider to turn off the iPhone. While holding down the volume down button, connect your iPhone to your computer. Hold the volume down button until the recovery mode screen appears.
3. If you have a backup of your iPhone data, after deleting the password, restore the data and settings.

Delete passcode on iPhone SE (1st generation), iPhone 6s and earlier

1. Make sure your iPhone is not connected to a computer.
2. Press and hold the side (or top) button until the “Turn off” slider appears. Move the slider to turn off the iPhone. While holding the Home button, connect the iPhone to the computer. Hold the Home button until the recovery mode screen appears.
3. If you have a backup of your iPhone data, after deleting the password, restore the data and settings.

IPhone Data Recovery

1. Select the iPhone device on the computer. When prompted to perform a restore or upgrade, select Restore. The Finder or iTunes app will download the software for the iPhone. If this takes more than 15 minutes, the iPhone will exit recovery mode and you will need to select the iPhone model again and repeat the steps to delete the password (see above).
2. Wait for the process to complete. Then set up your iPhone.

Still need help?

If you cannot update or restore your iPhone in recovery mode, or you cannot enable recovery mode due to broken or sunken buttons, contact Apple Support. Then follow the steps to complete your iPhone maintenance.

Hi friends! Not so long ago, I bought my wife an iPhone 7, and she is a forgetful lady and a problem arose: how to unlock iphone if you forgot your password? At this moment, I realized what the next topic of my article will be.

Despite the fact that most iPhone models have finger scanners, many out of habit continue to use digital passwords. There are also owners of phone models 4 and 4s, in which the fingerprint scanner is not built-in. Plus there is a chance of glitches on the scanner. That is why thousands of people still face the problem of a forgotten password.

1. How to unlock iPhone if you forgot your password: 6 ways

After the tenth attempt, your favorite iPhone is blocked forever. The company is trying to protect the owners of the phone as much as possible from hacking data, therefore it is rather difficult to recover the password, but there is such an opportunity. In this article, we will give you as many as six ways to unlock an iPhone if you forget your password.

1.1. Using iTunes in the previous sync

If the owner has forgotten the password on the iPhone, this method is recommended. Prudence in recovery is very important and if you are lucky to have a backup copy of the data, no problems should arise.
For this method you will need a computer that previously synchronized with the device.

1. Using a usb cable, connect the phone to the computer and wait until it appears in the list of devices.

2. Open iTunes. If at this step the phone starts asking for a password again, try connecting it to another computer or use the recovery mode. In the latter case, you will have to postpone the question of how to unlock the iPhone and restore the access password first. About it in method 4. Do not forget to check if you have the latest version of the program, if you need to update the program here. http://www.Apple.com/en/itunes/.

3. Now you need to wait, some time iTunes will synchronize the data. This process can take several hours, but it’s worth it if you need the data.

4. When iTunes indicates that synchronization is complete, select “Restore data from iTunes backup.” Using backups is the easiest thing to do if you forget your iPhone password.

5. A list of your devices (if there are several) and backups with their creation date and size will appear in the program. How much information remains on the iPhone depends on the creation date and size, changes made since the last backup will also be reset. Therefore, choose the latest backup.

If you are not lucky to have a pre-made backup copy of your phone or if you do not need the data, read the article further and choose another method.

1.2. How to unlock iPhone via iCloud

This method only works if the “Find iPhone” function is configured and activated. If you still wonder about how to reset your password on an iPhone, use any of the other five methods.

1. First of all, you need to go to the link https://www.Icloud.com/#find from any device, no matter if it is a smartphone or a computer.
2. If before that you did not enter the site and did not save the password, at this stage you need to enter data from the Apple ID profile. If you forgot your account password, go to the last section of the article on how to reset the password on an iPhone for Apple ID.
3. At the top of the screen you will see a list of “All devices”. Click on it and select the device you need, if there are several.

4. Press “Erase (device name)”, so you will erase all phone data along with its password.

5. Now the phone is available to you. You can restore it from an iTunes or iCloud backup, or reconfigure it as if it had just been purchased.

Without an Internet connection, most ways to crack a password on an iPhone will not work.

1.3. By resetting the counter of invalid attempts

If your gadget is blocked after the sixth attempt to enter a password, and you hope to remember the password, try resetting the counter of incorrect attempts.

1. Connect the phone to the computer via the usb cable and turn on iTunes. It is important that Wi-Fi or mobile Internet is turned on on your mobile.

2. Wait a while until the program “sees” the phone and select the “Devices” menu item. Then click “Sync with (the name of your iPhone).”

3. Immediately after the start of synchronization, the counter will reset to zero. You can continue to try to enter the correct password.

Do not forget that the counter cannot be reset just by rebooting the device.

1.4. Using recovery mode

This method will work even if you never synced with iTunes and didn’t connect the function to find iPhone. When using it, both the device data and its password will be deleted.

1. Connect your iPhone via usb to any computer and open iTunes.

2. After that you need to hold down two buttons simultaneously: “Sleep mode” and “Home”. Keep them long, even when the device starts to reboot. You need to wait for the recovery mode window. On the iPhone 7 and 7s, hold down two buttons: Sleep and volume down. Hold them for as long.

3. You will be prompted to restore or update the phone. Select recovery. The device may exit recovery mode, if the process drags on, then repeat all steps again 3-4 times.

4. At the end of the recovery, the password will be reset.

1.5. By installing a new firmware

This method is reliable and works for the vast majority of users, but requires the selection and download of firmware, which weighs 1-2 Gigabytes.

1. Using your computer, find and download the firmware for your iPhone model with the extension.IPSW. This extension is the same for all models. For example, almost all official firmware can be found here.

2. Enter Explorer and move the firmware file to a folder at C: \ Documents and Settings \ username that you use \ Application Data \ Apple Computer \ iTunes \ iPhone Software Updates.

3. Now connect your device to the computer via the usb cable and enter iTunes. Go to the section of your phone (if you have several devices). Each model will have a full technical name and you will easily find your own.

4. Press CTRL and Restore iPhone. You will be able to select the firmware file that you downloaded. Click on it and click “Open.”

5. Now it remains to wait. In the end, the password will be reset along with your data.

1.6. Using a special program (only after jailbreak)

1. Download the program at https://semi-restore.com/ and install it on your computer.

2. Connect the device to the computer via a usb cable, after a while the program recognizes it.

3. Open the program window and click the “SemiRestore” button. You will see the process of clearing devices from data and password in the form of a green bar. Expect the mobile might reboot.

4. When the snake “crawls” to the end, you can use the phone again.

2. How to reset password for Apple ID?

If you do not have an Apple ID account password, you will not be able to log into iTunes or iCloud and reset. All methods of how to recover the password on the iPhone will not work for you. Therefore, you will first need to reset your Apple ID password. Most often, the account identifier is your mail.

1. Go to https://appleid.Apple.com/#!Page = signin and click on the “Forgot Apple ID or Password?” button.

2. Enter your ID and click on “Continue”.

3. Now you can reset your password in four ways. If you remember the answer to the security question, select the first method, enter the answer and you will get the opportunity to enter a new password. You can also receive an email to reset your password to your primary or backup email account. If you have another Apple device, you can reset your password using it. In case you have connected a two-step verification, you will also need to enter the password that will come to your phone.

4. After you reset your password in any of these ways, you will need to update it in other Apple services.

Which method worked? Perhaps you know life hacks? Share in the comments!

Stop the panic. These steps will help you unlock your device on Android and iOS.

How to unlock your Android phone. 1. Use the Smart Lock function

The Smart Lock function automatically unlocks the screen when a certain condition is met. For example, if the device is in your home or another device is connected to it via Bluetooth.

You can use the function only if you activated it in advance and selected a condition for unlocking. In that case, just do it. For example, if you chose to automatically unlock when a trusted Bluetooth device is connected, turn on the wireless module on both. When the connection is made, the phone can be unlocked without entering a PIN code, password or key.

If Smart Lock has not been configured in advance or you cannot fulfill the specified condition, then this method is not suitable.

Now reading

• 200 free services for all occasions

2. Bypass protection with your Google Account

Some devices on Android 4.4 and older versions of the OS allow you to unlock the screen using your Google account. Provided that the device is connected to the Internet.

To check if your smartphone supports this method, enter any password, PIN or pattern key five times. After five incorrect attempts to enter, the message “Forgot your password?” Should appear on the screen. Or similar hint. Click on it and enter the login and password from the Google account with which your device is synchronized.

After successful login, the screen is unlocked. If you forgot your Google account password, try restoring access to it using the company’s special service.

3. Use the service from the smartphone manufacturer

Some brands offer owners of their devices additional unlocking tools. For example, Samsung has a Find My Mobile service, with which you can delete a pattern, PIN, password, and even a fingerprint. To do this, your device must be connected to a Samsung account, support the service and be online.

To find out if there are similar services for your model, look for this information in the instructions or on the official website of the manufacturer.

4. Reset the machine to factory settings.

If other options do not give a result, it remains to restore the factory settings. This will lead to the loss of all data, copies of which were not saved in your Google account and other cloud services. But you can remove the protection from the screen.

Turn off your smartphone and remove the memory card if it was inside. Then try these key combinations in turn until one of them works (you need to hold down the buttons for 10-15 seconds):

• Volume down key; power button;
• Volume up key; power button;
• Volume down key; power button; Home key;
• Volume down key volume up key power button.

When the service menu appears on the display, select Recovery, and then the Wipe data (or Factory reset) command. If none of the key combinations work or you do not see the necessary commands in the menu, look for the reset instructions for your device model.

After that, the smartphone should return to the factory settings within a few minutes. The device may request a username and password from a previously connected Google account, but you will no longer need to unlock the screen. After entering the old account, the system will restore the settings and data synchronized with it.

How to unlock iPhone

If you forgot the password for your Apple smartphone, you have only one way out. Reset to factory settings. This procedure unlocks the screen, but also erases from the iPhone all data not saved on your PC or in iCloud.

To reset, you need a USB cable, a Windows or macOS computer, and iTunes. If it is not installed, download it from the official Apple website. If your computer is running macOS Catalina or a newer version of the OS, use the Finder application instead of iTunes.

To perform a reset, turn off the smartphone and follow the instructions for your model.

• If you have an iPhone 8, iPhone 8 Plus, iPhone X or newer: while holding the side button, connect the device to the computer via the USB cable and do not release it until the recovery window appears.
• If you have an iPhone 7 and iPhone 7 Plus: while holding the volume down button, connect the device to the computer via the USB cable and do not release it until the recovery window appears.
• If you have an iPhone 6s or older: while holding the Home button, connect the device to the computer via the USB cable, and do not release it until the recovery window appears.

When a dialog box appears on your computer’s display, click Restore and follow the prompts from iTunes or Finder. First, the system will return to the factory settings, and then offer to restore the saved data. As a result, the screen will be unlocked.

If the wait time exceeds 15 minutes, the device will exit recovery mode. In this case, reconnect the smartphone to the computer, again holding down the corresponding button until the desired window appears. Then click Restore again.