How to reset Mi Band 3 without a phone
Mi Band 3. no pairing, no reset, nothing
Through the app
To delete the parameters stored in the memory (for example, the distance traveled or information messages), the following utilities are used:
- Mi Fit (original program from Xiaomi that deletes data by changing accounts);
- Diagnostic (products from alternative developers, allowing forcibly zeroing the device memory).
Mi Fit
Before starting to clear the memory, you need to disconnect the bracelet from the smartphone through the application menu. The owner needs to open the profile, find the Mi Band 3 wrist device in it, and then scroll through the page with the settings to the end. At the bottom there is a button that allows you to break the connection between products. If the tracker was not tied to a smartphone, then you must first pair the devices, and then disconnect the communication channel. After the bracelet is untied from the account, you need to create a new account and bind the bracelet to it.
The software will display the license agreement, which you must accept. After sending a vibration signal confirming the binding, it is necessary to turn off the Bluetooth transceiver unit on the smartphone (through the settings). If the user leaves the Bluetooth channel active, then problems arise when deleting information. Then the saved data stored in the cache of the Mi Fit program is cleared. After deleting the information, the operation of the wireless communication channel is restored and the operation of the wristband is checked.
Extreme measures
Among the owners of Mi Band 3 equipment, there are ideas that the factory parameters can be restored without the help of a smartphone. The techniques are based on discharging the battery or applying short current pulses to the charging circuit. A method of long-term storage at low temperature is proposed. All these methods will not lead to the desired result, but to equipment breakdown (the defect will not be recognized by the warranty).
Mi Band 3 How To Hard Reset
Through lowering the charge level
To return the parameters to the factory settings, some users recommend a deep discharge method of the battery built into the bracelet. After the equipment is in a discharged state, the parameters will return to their original values. However, in practice, this phenomenon does not occur, since the memory unit of the bracelet is non-volatile. The wrist product can be stored without recharging for years, the settings are not reset.
Shock freeze
Another erroneous technique for resetting the Mi Band 3 bracelet is the procedure for lowering the temperature of the product. After cooling to 18.20 ° С (for example, in the freezer of a household refrigerator), according to a number of owners, it will be possible to reset the settings. However, this does not happen, but there is a possibility of irreversible damage to electronic components, the battery or the plastic case of the bracelet, which are not designed for a low temperature.
For iPhone owners
To remove the settings, you need to download the distribution kit of the Mi Fit program, adapted for Apple smartphones. After installing the application, an attempt is made to pair with the bracelet, information about the error will be displayed on the smartphone screen. Then the iOS operating system will offer to reset the bracelet settings. After pressing the confirmation button, the information stored in the memory of the wrist equipment is deleted.
Several ways to reset Mi band 3 to factory settings
Electronic equipment during operation may begin to malfunction, which are caused by errors during setup or during software operation. The owner needs to know how to reset Mi Band 3 to its original settings. The manufacturer does not officially declare the possibility of deleting the settings from the memory of the bracelet, the procedure is carried out through the application menu.
For iPhone owners
To remove the settings, you need to download the distribution kit of the Mi Fit program, adapted for Apple smartphones. After installing the application, an attempt is made to pair with the bracelet, an error information will be displayed on the smartphone screen. Then the iOS operating system will offer to reset the bracelet settings. After pressing the confirmation button, the information stored in the memory of the wrist equipment is deleted.
Several ways to reset Mi band 3 to factory settings
Electronic equipment during operation may begin to malfunction, which are caused by errors during setup or during software operation. The owner needs to know how to reset Mi Band 3 to its original settings. The manufacturer does not officially declare the possibility of deleting the settings from the memory of the bracelet, the procedure is carried out through the application menu.
Through lowering the charge level
To return the parameters to the factory settings, some users recommend a deep discharge method of the battery built into the bracelet. After the equipment is in a discharged state, the parameters will return to their original values. However, in practice, this phenomenon does not occur, since the memory unit of the bracelet is non-volatile. The wrist product can be stored without recharging for years, the settings are not reset.
Through the app
To delete the parameters stored in the memory (for example, the distance traveled or information messages), the following utilities are used:
- Mi Fit (original program from Xiaomi that deletes data by changing accounts);
- Diagnostic (products from alternative developers, allowing forcibly zeroing the device memory).
Diagnostician
Before starting to clear the memory of the equipment, you need to download and install the application on your smartphone. The software is distributed freely, but since the product is not official, it will not be possible to save the distribution through Google Play or the App Store. After downloading the utility, installation is performed; additional settings are not required. The utility was originally created by Chinese developers, the menu is translated into Russian.
Algorithm for resetting the settings on a phone with the Android operating system:
- Launch an application that automatically checks the connected devices. The wrist product must be connected to the smartphone via Bluetooth wireless technology in advance.
- After scanning is complete, a dialog box will display a list of the equipment associated with the phone. You must select the Mi Band 3 bracelet from the list.
- To reset the settings, you will need to click on the restore and factory reset button located in the dialog box. The program automatically erases information stored in the phone‘s memory.
- Then a short action is made on the key located on the front of the wristband.
- It is necessary to check the parameters of the product, since the developers of the application do not guarantee the final result of the work. The creators of the program warn the owner in advance about possible problems leading to the loss of the bracelet’s performance. If necessary, the utility allows you to update the firmware, the improved software eliminates failures and malfunctions of the equipment.
Shock freeze
Another erroneous technique for resetting the Mi Band 3 bracelet is the procedure for lowering the temperature of the product. After cooling to 18.20 ° С (for example, in the freezer of a household refrigerator), according to a number of owners, it will be possible to reset the settings. However, this does not happen, but there is a possibility of irreversible damage to electronic components, the battery or the plastic case of the bracelet, which are not designed for a low temperature.
How to hard reset MI band 3 without mobile APP | factory reset| HINDI
Mi Fit
Before starting to clear the memory, you need to disconnect the bracelet from the smartphone through the application menu. The owner needs to open the profile, find the Mi Band 3 wrist device in it, and then scroll through the page with the settings to the end. At the bottom there is a button that allows you to break the connection between products. If the tracker was not tied to a smartphone, then you must first pair the devices, and then disconnect the communication channel. After the bracelet is untied from the account, you need to create a new account and bind the bracelet to it.
The software will display the license agreement, which you must accept. After sending a vibration signal confirming the binding, it is necessary to turn off the Bluetooth transceiver unit on the smartphone (through the settings). If the user leaves the Bluetooth channel active, then problems arise when deleting information. Then the saved data stored in the cache of the Mi Fit program is cleared. After deleting the information, the operation of the wireless communication channel is restored and the operation of the wristband is checked.
Extreme measures
Among the owners of Mi Band 3 equipment, there are ideas that the factory parameters can be restored without the help of a smartphone. The techniques are based on discharging the battery or applying short current pulses to the charging circuit. A method of long-term storage at low temperature is proposed. All these methods will not lead to the desired result, but to equipment breakdown (the defect will not be recognized by the warranty).
Method 4. Linking Mi Band 3 or 4 to another account
This method can be used when binding a smartphone to a new bracelet. It is necessary to synchronize the devices, then:
- Enter the smartphone settings;
- Open “All Applications”;
- Find or install the official “Mi Fit” application and open it;
- Click “Clear” and select “Cache”;
- Confirm Action.
After that, the settings of the old fitness tracker will be deleted, the data will be reset.
Method 2. Unlinking an account
In some cases, the settings of the fitness bracelet will be restored by default if you unlink the account you are using on your smartphone.
- Open the application for managing the bracelet on the phone;
- Enter the “Profile” tab;
- Click on the name of the device;
- Click on the “Disable” button (“UnPair” or “Pair”).
The bracelet will reboot and the default settings will be restored.
Factory reset Xiaomi Mi Band 3 and 4: 5 ways
Resetting Xiaomi Mi Band 3 or 4 to factory settings will help return your bracelet to normal operation if it starts to glitch or freeze.
We offer you as many as 5 ways to reset. Please like the one you like best to help other visitors to our site. The results can be seen at the end of the article.
Please note that if you want to reset to factory Xiaomi Mi Band 2, then go directly to the 3rd method, because the first two will not work.
Method 3. Third Party Application
To reset the settings of the Xiaomi bracelet, you can use the Mi Band Diagnostic application. It is compatible with the entire line of Xiaomi Mi wearable devices, including the Mi Band 2.
The Mi Band Diagnostic application is not available in the Play Market and App Store. Therefore, to install it, you need to download its.apk file. (use a search in Yandex or Google).
- Open the application and wait until it detects the bracelet;
- Click on the name “Xiaomi Mi Band (2,3 or 4 depending on your model)”;
- Select the option “Restore factory settings”;
- Confirm the action by clicking on the notification that appears on the tracker screen.
After that, the Xiaomi Mi Band will be reset to factory settings.
Method 1. Reset without phone
This method allows you to reset Mi Band 3 or 4 without a phone through the bracelet menu. For this:
- Open the settings menu;
- Find the item “Details”;
- Move to the left until you get to the item “Reset settings”;
- Press and hold the touch button of the bracelet;
- Confirm the action if necessary.
That’s all. After that, the Xiaomi Mi Band will be reset to the factory.
If for some reason this standard and simplest method does not suit you, use the others below.
Method 5. Discharging the Battery
The Mi Band watch settings will be restored automatically if you perform the following steps one by one:
- Fully discharge the Smart-bracelet and wait until it turns off;
- Do not turn it on for several days;
- Then put on charge and turn on.
The settings set on the watch should reset themselves.
