How to Remove Password From iPhone If Forgot

Unlock Android Smartphone

The recommendations below are very dependent on the version of the operating system installed and on what additions the smartphone manufacturer has made to it. However, each is worth a try.
On the old now, version of Android 4, unlocking a PIN or pattern can be quite simple. after several attempts to enter incorrectly, you will have a link to restore access. And if you remember the password for your Google account, which is registered on your phone, then you can easily remove the lock via remote access! Here the truth is to make a reservation. the smartphone must be connected to the mobile Internet or to a Wi-Fi network.
Another method that works on newer versions of the operating system is Android remote control. It is available here. link. This is a very convenient and rather functional tool with which you can track your device, as well as control it from a computer.

To unlock your phone, first select “Lock” and set a new password. Then unlock and log into the device with a new password. Profit!

For smartphones and tablets Samsung there is a special proprietary utility Dr.Fone. It also allows you to restore access to the phone’s operating system, reset the graphic password or SIM card lock.

Sometimes you can unlock Android as follows:

At the bottom of the screen, tap on “Emergency Call”.
2. Enter ten times the character “”
3. Double click on the entered character string and select “Copy”.
4. Paste the copied characters at the end of the already entered sequence of asterisks.
5. Repeat the action. This should be done until the machine has filled the entire field length and refuses to insert characters. The result will be the copied long-long line of stars.
6. Return to the lock screen. Open the Camera app by swiping up from the bottom of the screen.
7. Open the settings by clicking on the gear icon.
8. Android will ask for a password. Click on the field and hold until the “Paste” command appears. Paste the copied stars into the input field.
9. Repeat the procedure until the screen is unlocked and access to the system appears again.
10. Profit!

In the case when you need to unlock the phone in order to use it and at the same time the data is not important. you can reset to factory settings through the boot menu of the device.

To do this, turn off the device, hold down the volume rocker downward along with the power key. We keep them in this state until the phone boots into Recovery mode. We select the option “wipe date / factory reset”. After that, the device should reset all current parameters and settings, which will help to remove the lock through a pin code or pattern.!

How to unlock your phone if you forgot your password or PIN

Human memory is the most extensive data storage in the world and the most unreliable, too. What to do if you forgot your PIN and how to unlock your Android or iOS phone if you forgot your password. The whole complexity of the situation lies in the fact that the device usually stores necessary or important data and contacts, which you do not want to lose at all.
At the same time, it is quite difficult to hack the hardware protection of modern smartphones and tablets.

And in some cases, on the contrary. the data is not so important, how much you need to unlock your phone in order to use it corny. I want to give you some tips that any user can follow. And if they don’t help, you just have to carry the gadget to the service center.

How to Unlock iPhone

The situation with Apple phones from Apple is even more complicated. The way to unlock the device depends on which version of iOS is installed on the iPhone. Based on this, you need to search the Internet for vulnerabilities that allow you to bypass the blocking.

Also, sometimes this can help. Press the “Home” button on the smartphone lock screen. This will allow you to call the Siri voice assistant. Ask the question. “What time is it now.” In response, a clock should appear on the screen. First tap before the clock, and then tap the plus sign in the upper right corner of the display. Next, you need to enter several arbitrary letters into the input line. Select them and copy them. Then double-click on the entered letters to bring up a context menu. select the arrow and the item “Share”. Select the “Messages” option and paste the previously copied characters into the “To” line. We wait a few seconds and press the “Home” button. The phone should then unlock. Done!

Here’s another way to unlock your iPhone:

If there are no other options other than resetting to factory settings, you can try this option as well. Reset iPhone can be done through the iTunes application directly from the computer to which you will need to connect the phone with a cable. Of course, all data will be erased.

Reset picture password with ADB

The pattern can be removed using ADB. You need to connect the device via USB to the computer and enter the required commands. All details in the instructions →

The method will only work when USB debugging is enabled.

Removing gesture.key (unlock graphic pattern) and password.key (reset password)

The method is intended for owners of phones and tablets with root-rights and CWM Recovery. Its action is to delete the system files “gesture.key” and “password.key”, which are responsible for displaying the graphic lock and password, respectively.

This requires the Aroma file manager. Download the archive from the link and drop it onto your phone or tablet without unpacking. Then turn off the device and go to the Recovery menu. To do this, instead of the power button, hold down one of the possible combinations (or read the FAQ for specific models):

• Volume up “ON”
• Volume Down “ON”
• Volume up / down Power Home

Using the volume up and down buttons, you move up and down, respectively, and confirm the selection with the power / lock button. In new smartphones, Recovery may be touch sensitive.

In the CWM Recovery menu, select “Install zip”.

Then click “Choose zip from / sdcard” and go to the folder where you dropped Aroma or use “Choose zip from last install folder”. In the second case, you will see all the last downloaded archives, among which you will find the desired one.

Select the archive with Aroma Explorer.

Next, the file manager itself will open. Go to the path / data / system / and delete the files:

• “Gesture.key” (“gatekeeper.pattern.key” in newer firmware)
• “Password.key” (or “gatekeeper.password.key” instead)
• “Locksettings.db”
• “Locksettings.db-wal”
• “Locksettings.db-shm”

Select them and click “Delete” in the additional menu.

Finally, reboot your device. You can enter any password and the phone will be unlocked. Then feel free to go to the settings and set a new lock.

Backup PIN on LG

When installing a screen lock on LG, you need to set a backup PIN-code, which can be entered instead of a pattern or password, and unlock the phone.

To do this, draw the wrong graphic pattern until the message about blocked input for 30 seconds appears. Click “OK”, at the bottom select “Forgot your pattern?”, Enter your PIN and click “OK”.

We use the service “Find device”

Google created Find My Device, which has a Hard Reset feature. The lock is reset accordingly.

If the device is not connected to the Internet, open the quick settings panel and connect to a mobile or Wi-Fi network (open or the one to which you have connected before).

From a computer or other device, go to https://www.google.com/android/find and log in.

The service will determine the location of the phone and when it was last online. In the list of options, select “Clean device”.

Click on “Clean device” again.

To confirm the deletion, click on the “Clear” button.

When the device is offline, Wipe will be done the first time you connect to the Internet.

How to reset password and unlock pattern on Android

If you’ve forgotten your Android password or pattern, there’s no reason to panic. You can restore access to your smartphone, and there are several ways to remove the lock. The updated instructions detail each of them.

How to reset password or lock on Android

(!) The article contains the main ways to reset a password / pattern, ranging from the simplest (when you remember the username and password of your Google account) and ending with the more complex: Hard Reset, deleting the “gesture.key” and “password.key” files. Read all the points carefully, follow the indicated links for detailed instructions, and everything will work out!

How to remove graphic lock via TWRP Recovery

TWRP Recovery has a file manager. through it, files that display a password or a pattern are deleted, without installing Aroma File Manager. To do this, put your mobile gadget into recovery mode (see the previous method) and open “Advanced”.

Then click “File Manager”.

Go to the / data / system / folder and delete the following files:

• “Gatekeeper.password.key” (in older Android versions the file is called “password.key”)
• “Gatekeeper.pattern.key” (in older firmware. “gesture.key”)
• “Locksettings.db”
• “Locksettings.db-wal”
• “Locksettings.db-shm”

Tap on one of the files and select “Delete” in the list that appears.

Swipe right to confirm.

Then click “Back” and follow the same steps with the remaining files.

To reboot Android, go back to the main menu and select “Reboot” → “System”.

How to unlock the pattern on Chinese phones with MTK processors

Smartphones Meizu, Xiaomi, Lenovo, Fly, Elephone, Blackview, ZTE, Bluboo, Doogee, Oukitel, UMI and other Chinese manufacturers running on MTK chips are flashed with the SP Flash Tool. Using it, you can easily install custom Recovery without clearing the rest of the partitions, and through TWRP or CWM, you can delete the files “password.key” (or “gatekeeper.password.key” in newer versions of Android), “gesture.key” (“gatekeeper.pattern.key “),” locksettings.db “,” locksettings.db-wal “and” locksettings.db-shm “.

(!) For some Chinese smartphones with a locked bootloader running on Android 7.0 Nougat and higher, this method will not work. They need to activate the item “Factory unlock” (“OEM unlock”). This is done through the menu “Settings” → “For Developers”, which cannot be reached on a locked phone.

Download the current version of the program from the official website: http://spflashtool.com/, a link to USB drivers for MTK chips is in the Fastboot installation instructions. Download the Recovery image file and “. scatter.txt” for your processor. they can be found in the topics of the corresponding models on forums such as w3bsit3-dns.com, XDA-Developers, Needrom. Place the files in one folder so that the path does not contain Cyrillic characters. Rename the image to “recovery” with the extension “.img”.

Unzip SP Flash Tools to “C: \” drive. Open the folder and run “flash_tool.exe” as administrator.

Click on “Scatter-loading”, go to the folder where “recovery.img” is located and select the scatter file.

Only the “recovery” section will be marked. At the top, click “Download”.

Now turn off the smartphone, remove the battery (if possible) for a few seconds, insert it back and connect the switched off device to the PC via USB.

A red bar “Download DA 100%” will appear.

Next is yellow, which will show the percentage of the firmware process completed.

At the end, the “Download Ok” window will appear, which means the successful installation of Recovery.

Then you need to immediately start Recovery so that the stock does not overwrite the custom one when you first turn it on. Usually, on Chinese phones, you need to hold down the power and volume up keys until a special menu appears. Use the Volume “UP” button to move to the “Recovery” item and confirm with the Volume “Down”.

Now go to steps 5 or 6 (depending on the installed Recovery: CWM or TWRP) and delete the forgotten password.

How to remove the pattern on Samsung phones using “Find My Mobile”

Owners of smartphones of the most popular brand have the ability to unlock the device if the Internet is turned on and a Samsung account is added. You need to go to https://findmymobile.samsung.com/, click “Login” and enter your login and password.

After detecting your tablet, Samsung phone, on the side in the options, click “Unlock”, then again “Unlock” in the pop-up window, and re-enter the password.

Done. a notification will appear in the Android curtain about removing the key or pin from the screen.

How to Reset Screen Time Passcode on iPhone?

On iPhone, iPad or iPod touch

• Make sure your device is updated to iOS 13.4 or iPadOS 13.4 or later.
• Select Settings Screen Time.
• Click Change Screen Time Passcode, then click Change Screen Time Passcode again.
• Click “Forgot your password?”.

How to Reset iPhone Passcode without Computer?

Recovery Mode to Unlock iPhone if Forgot Password

• Turn off your phone.
• Connect it to your computer.
• Select Recovery Mode from the menu that appears.
• Turn on iTunes, click OK and then “Restore iPhone”.
• If a message appears about auto-checking for updates, click on the “check” button.

How to remove an old owner’s Apple ID without knowing the password?

If a password request appears and the data has not been erased from the device, ask the previous owner to unlock the device and go to the Settings menu General Reset Erase Content and Settings. After that, you will need to enter the Apple ID and password of the previous owner.

How to reset iPhone password?

On iPhone, iPad or iPod touch

• Go to the “Settings” menu.
• Click [your name] Password & Security Change Password.
• If you are signed in to iCloud and have password enabled, you will be prompted for the password for your device.
• Follow the onscreen instructions to change your password.

How to remove passcode from iPhone ? How to Remove Passcode from iPhone 7?

How to remove password on iPhone and iPad

• Go to Settings → Touch ID & Passcode.
• Enter your passcode.
• Select “Disable passcode” and follow the further system instructions.

How to disable iPhone lock feature?

Go to Settings. General. Accessibility. Guided Access. 2. Enable the option and set the disable code. Conveniently enable Touch ID to quickly turn off the mode.

How to unlock the screen on iPhone?

To do this, go to Settings. General. Accessibility. Home and activate the “Swipe to open” option. So pressing and holding the Home button for a short time will turn on the display and unlock the gadget. May 21, 2017.

How to unlock iPhone if the screen is unresponsive?

To do this, you need to perform a “hard reboot” of the device by simultaneously holding down the buttons “Home” and “Power off / on the device.” After 15-20 seconds, the smartphone screen will turn off, after which the Apple icon will light up on it. this means that the reboot was successful.

How to Reset iPhone to Factory Settings Using Buttons?

Now for this you need:

• Press and release the volume up button.
• Press and release the volume down button.
• Press and hold the side button until the Apple logo appears.
• So to implement a Hard Reset, you need to hold down the volume down and Power buttons until the Apple logo appears.

How to remove passcode on iPhone 5?

On an older iPhone, go to Settings Touch ID & Passcode. On devices that don’t support Touch ID, go to Settings Password. This section contains various parameters and functions. Disable Passcode: Select this option to disable passcode.

How to Factory Reset iPhone without Passcode?

To do this, follow these steps:

• Go to the device menu in the “Settings” “General” “Reset”.
• Click “Erase Content and Settings”.
• Enter your device password or Apple ID password to confirm.

Can I Unlock iPhone 5?

Unless you made a backup beforehand. Despite this, you can still unlock your iPhone. To do this, you will have to erase all data from the device (including the numeric password).

Is it possible to unlock iPhone?

If you’ve forgotten your iPhone passcode, or your iPhone is turned off. If you can’t remember your passcode, you’ll need to erase all data from your iPhone along with your settings and passcode. If you backed up your iPhone, you can restore data and settings after restoring iPhone.

How to remove password from iPhone 5? How to remove code password?

How to remove screen lock password on Android phone in settings?

• Next, make a swipe across the display and you will be prompted to enter your desktop password.
• Next open the settings.
• Find the section “Screen lock and passwords”.
• Click on “Password”.
• Enter the password to unlock the device again.

What to do if you forgot your iPhone 5 password?

Recovery Mode to Unlock iPhone if Forgot Password

• Turn off your phone.
• Connect it to your computer.
• Select Recovery Mode from the menu that appears.
• Turn on iTunes, click OK and then “Restore iPhone”.
• If a message appears about auto-checking for updates, click on the “check” button.

How to factory reset iPhone 5 with buttons?

Entering Recovery Mode

• Press the “Home” and “Power” buttons simultaneously.
• The device will show a shutdown slider and then the screen will turn off.
• Wait until the device starts to boot and release the “Power” button.
• After 10-15 seconds, a cable image and an iTunes icon will appear on the screen.

ITGuides.ru. Removing BIOS password

If the user is tired of constantly entering the code when turning on the computer, or he just wants to delete it, then you need to do the following:

• Go to BIOS and select “BIOS Setting Password”.
• When a window with a new password appears, you do not need to enter anything, just press the “Enter” key.
• When the message “Password uninstalled” appears (ie the password has been removed), press “Enter” again.
• Save the result by pressing “F10” and then “Enter”.

The password will be removed. But this is not yet a password reset, but only deleting it. Password reset will be needed if the user does not know (or has forgotten) the required combination.

Questions and answers in the field of it technologies and PC customization. How can I reset the BIOS password of a computer and laptop

Sometimes curious users of personal computers, or those who seek to protect their data as much as possible, constantly put passwords on everything they can: from a Word document or a folder to a password on Windows and even BIOS (it is advisable to put a code on the BIOS only if if you know how to remove the password from the BIOS). In addition to all this, each user also has accounts on social networks, mailboxes, various programs (like Skype) or websites. and there are passwords everywhere. And if they are all different, then quite often these combinations are forgotten or just confused.

The loss of the BIOS password is especially difficult. password to boot the system. In this situation, it turns out that if the user forgets the code from the BIOS, he will not even turn on the computer. In addition, he will not be able to enter the BIOS to try to reinstall Windows, thereby resetting the password. Such cases quite often end with the purchase of a new motherboard (this is where the BIOS is stored). However, all this can be avoided by taking advantage of some of the weaknesses of the computer architecture. Despite the fact that the BIOS is considered to be quite a powerful means of protection, there are still “secret paths” with which you can bypass the password set in the BIOS. Fortunately, the developers of motherboards have foreseen the likelihood of such situations and deliberately left several options (“back doors”) with which you can reset the password on the BIOS.

Video guide to reset BIOS password. Setting a password in BIOS

Before describing the process of resetting a password, you first need to know how to install it, remove it, and also whether it is effective to install it to protect your computer specifically on the BIOS.

Setting a password in BIOS to protect your computer is considered more effective for several reasons. If, for example, you set a password when you enter the operating system, then it can be easily hacked programmatically or even bypassed (for example, through safe mode). Doing the same in the BIOS is unlikely to work. This is the first plus. In addition, the password set in the BIOS is requested immediately when the computer is turned on (even before the operating system is turned on), so that those who do not know the combination will not even be able to turn on the computer. To enter the BIOS settings and change or delete the password, you will also need to enter the existing code, and this is another plus for such protection.

Of course, any protection can be hacked or bypassed, and BIOS is no exception. To do this, you just need to open the system unit or laptop and perform certain manipulations. But not everyone will be able to cope with such a task, and quite often such users simply turn to specialists at the service center.

So, how do you set a password on a BIOS? First, you need to restart your computer (or just turn it on if it was turned off before) and enter the BIOS by pressing the “Delete” button. You can click several times until the BIOS opens. there is nothing wrong with that. But not all BIOS calls are made using this button. It all depends on the computer / laptop and the installed motherboard. You can find out which key calls up the BIOS when you turn on the computer (even before the operating system boots). the required key will be written at the bottom of the screen. It can be “Delete”, “F1”, “F2”, “F10”, etc.

You can set the BIOS password by going to the “Security” tab of the BIOS Setup menu

After the BIOS opens, you need to find the item “BIOS Setting Password” in the main menu. After pressing the “Enter” button, a small window will open in which you can set a password. The maximum possible combination size also depends on the BIOS, for example, 6 characters. So, in this case, you can come up with a good password up to 6 characters, enter it and press the “Enter” key. At the same time, it is advisable to write this combination somewhere else. Further, the system will give the user another window of the same type, where he will need to confirm the password. You must enter the same code again and click “Enter”. After that, the system will display the message “Password installed” (ie, the password is set) and you can click “OK”.

That’s it, the combination is set, but it will be requested only when trying to enter the BIOS. The computer, as before, will turn on without a password. If you need to make sure that the code is requested even when the computer is turned on, then you will need to perform one more configuration.

In the same menu, you need to find the “Advanced BIOS Features” tab and click on it. Then you need to find the item “Password Check”. Usually, opposite it is the “Setup” item, which means that the combination will be requested only when entering the BIOS. In this case, you will need to change this parameter to another. “Always”. Now the installed code will be requested both when you turn on the computer and when you try to enter the BIOS. It remains only to save all the changes. To do this, press the “F10” key, and then. “Enter”. The computer (or laptop) will immediately reboot, and when turned on, a window will appear asking for a password. It is necessary to enter the set combination and press the “Enter” key. After that, the operating system will start loading.

How to reset BIOS password?

There are several ways how to remove the password in the BIOS:

• using a battery;
• using the emergency CMOS button;
• using the DOS environment.

Without the motherboard battery, all your BIOS settings (not just the password) will be reset to factory defaults

The first two are the BIOS battery and the emergency button. These parts are found on the motherboard. The battery acts as a constant recharge to save all data. In this case, this very BIOS battery will be able to help reset the unknown code: for this you need to remove it for a while (preferably for a day). Then you need to return the battery to its original place and you can turn on the computer.

The method is effective, but long, and time is a very valuable resource that a user or an IT specialist may not have. In addition, on some motherboard models, the battery is very difficult to remove, especially on laptops. It is because of such features that this option becomes not very practical and is used only in extreme cases.

A more practical way, which is described in the instructions for the motherboard, is to use the CMOS emergency button. Many motherboards have connectors for clearing CMOS memory. As a rule, such connectors are located near the battery. You can find out the exact location using the instructions for the motherboard or on the manufacturer’s official website. To clear the CMOS memory, you need to press this button, after which the unknown code will be reset (of course, before that, you need to turn off the computer from the outlet and spin the system unit). Then you can turn on the computer.

And the last option, how to unlock the forgotten code, using the DOS environment. But for this you need to boot into pure DOS, and not the emulator from Windows. You can remove the password using certain combinations. For example, for Award and Ami BIOS, enter the following:

-O 70 17
-O 71 17
Q

And for Phoenix BIOS, the command will look like this:

-O 70 FF
-O 71 FF
Q

The letter “O” stands for “output”, “Q” stands for “quit”, the first number is the port, and the second is the number of bytes (hexadecimal).

These are the ways you can get access to a locked computer. You also need to remember that resetting a BIOS password is quite expensive, especially on laptops. Therefore, it is highly discouraged for paranoid people and those who like to set passwords wherever possible, to put it on the BIOS. you can do without it. Otherwise, after a year or two, such users will forget the password, and, perhaps, this unnecessary precaution will cost them a pretty penny.

Thank me, share the link with your friends on social networks:

How to Remove Activation Lock from iPhone?

The previous owner is not near you

• Sign in to iCloud.com with your Apple ID.
• Open Find My iPhone.
• Click “All devices” at the top of the screen.
• Select the device you want to remove from iCloud.
• Click Erase [device].
• Click “Remove from Account”.

How to Unlock iPhone 5?

In order to remove the password, you must reset all settings to the factory settings for iPhone 5. To do this, enter the phone in DFU mode and connect it to a computer with iTunes installed for recovery. To do this, hold and hold the On / Off buttons. and “Home” for about 10 seconds.

Can I Unlock iPhone 5?

Unless you made a backup beforehand. Despite this, you can still unlock your iPhone. To do this, you will have to erase all data from the device (including the numeric password).

How to remove six-digit passcode on iPhone 5s?

Changing the password or its settings

On devices that don’t support Touch ID, go to Settings Password. This section contains various parameters and functions. Disable Passcode: Select this option to disable passcode. Change Passcode: Enter a new six-digit password.

How to remove passcode from iPhone 5s if forgot?

Recovery Mode to Unlock iPhone if Forgot Password

• Turn off your phone.
• Connect it to your computer.
• Select Recovery Mode from the menu that appears.
• Turn on iTunes, click OK and then “Restore iPhone”.
• If a message appears about auto-checking for updates, click on the “check” button.

How to reset password on iPhone 5?

How to remove password on iPhone and iPad

• Go to Settings → Touch ID & Passcode.
• Enter your passcode.
• Select “Disable passcode” and follow the further system instructions.

How to Factory Reset iPhone using Buttons?

Now for this you need:

• Press and release the volume up button.
• Press and release the volume down button.
• Press and hold the side button until the Apple logo appears.
• So to implement a Hard Reset, you need to hold down the volume down and Power buttons until the Apple logo appears.

What to do if you forgot your Apple ID and password upon activation?

Typically, you use your email address as your Apple ID. If you’ve forgotten your Apple ID, we’ll help you recover it. If you’ve forgotten your password, you can reset it on your device or on your Apple ID account page.