How to properly adjust the colors LG TV
TV tuning tips
For starters, what is “proper tuning.”. If you’ve been to an electronics store at least once, you’ve probably noticed that all the televisions on display show differently. What it has to do with? Which one is better?? Let’s get this straight.
I think you will agree that a TV should not only show a picture, but it should also present the least amount of distortion of the original content. The content is always created based on industry standards and recommendations, and the main purpose of any TV is to bring you the exact image you want to see. Everything matters: the tone of the actor’s skin, and the color of the sky at sunset, and what details of the image should be visible and what is hidden. There are international standards that describe how the picture on your TV screen should look. You’ve all probably met the abbreviations PAL, NTSC, or HDTV, but behind these letters and hide the properties of the video signal and the different parameters of the image. With the arrival of HDTV into our lives, most of the standards immediately became obsolete, and, in fact, the most relevant now is the REC709 standard, which is used in high definition television (HD) and in Blu-ray video. The general parameters of a proper picture are:. 6500K color temperature (D65). gamma is linear, with a recommended value of 2.22, for darkened room 2.4. recommended brightness ~120 cd/m2. REC709 color gamut (similar to sRGB gamut).
The only sure way to get the correct picture on your TV is to do a hardware calibration. It consists in that the reference images are fed to the input of the TV set and the measurements are taken from the screen. Then you adjust the TV settings until the picture is as close to the required standard as possible. But this setup is quite time consuming, requires knowledge, and above all equipment.
Is it possible to get a truer picture on your TV without having to do a hardware calibration?? Here are some tips based on my experience of tuning different TVs.
Which picture mode to choose (standard/dynamic/cinema)? On the vast majority of TVs, the most correct mode is Cinema/Cinema. Do not use Dynamic mode for viewing: because of the non-linear gamma the image is always wrong, and because of the greatly increased brightness of this mode strains the eyes, especially if you watch TV in dim light or in the dark.
Which color temperature mode to choose (cool/standard/warm)? On the vast majority of televisions the Warm mode is the closest to standard color temperature (6500K). If you have a choice of Warm1/Warm2 (on Samsung TVs), determine for yourself which one is best. Usually it is Warm2, but there may be exceptions.
Which settings are recommended to turn off to get the best image? It is necessary to disable all settings that adjust the brightness/contrast at the discretion of the TV. That is, you should turn off “dynamic contrast”, “power saving mode”, “light sensor”, “dynamic backlighting” and not use the “Dynamic” image mode.
How to set the “contrast” parameter correctly? In fact, this parameter is incorrectly called “contrast”, since the contrast is the ratio of the maximum brightness of the white field (white level) to the black level (the minimum luminosity level of the panel). So, the parameter “contrast” in the menu of the TV changes the white level, that is, the level of maximum brightness of the image.
For plasma:. it is better to adjust the parameter “contrast” in the dark;. to display an image with a white level window (100IRE) (links at the end of the article);. set the “contrast” parameter to a value close to the maximum (90-95);. reduce the “contrast” parameter, until the picture with white level (100IRE) will not “cut eyes”.
Samsung plasma TVs have a parameter “cell brightness” (cell light), which has a large impact on the overall picture brightness. You can immediately set it to a value close to the maximum (18-20), and then follow the recommendations.
LCD TVs are constructed in a slightly different way. they have a parameter “backlighting brightness” (sometimes called “backlight contrast”) which has the greatest value for the overall image brightness.
For LCD/LED:. better adjust in the dark;. set the “contrast” parameter close to maximum value (90-95);. display the image with the white level window (100IRE) (links at the end of the article);. set the “backlight brightness” parameter to maximum or obviously higher value than it is necessary;. decrease the “backlight brightness” parameter until the image with white level (100IRE) stops “cutting the eyes.
I do not recommend using the maximum values of the “contrast” parameter, because some TV sets have non-linear color temperatures when set to the maximum value. Excessively bright picture (and for the real brightness in the TV responsible “contrast” / “brightness of the backlight”) strains your eyes and leads to eye fatigue, remember this when you adjust these parameters.
How to set the “brightness” parameter correctly? The “brightness” parameter determines the black level. You can use the special image “Pluge pattern” to set it to the right position. In this picture the leftmost vertical line is black. To adjust the Brightness setting as needed, first increase the setting until you can see all the bars clearly, then decrease the Brightness setting until the left-most vertical bar fades into the background. You can also use special setup CDs, such as AVSHD (link at the end of the article), where in “Basic Settings” you will find the necessary images to configure the basic TV parameters.
How to adjust the picture on any LG TV
One of the main points of the initial adjustment of the TV, are the image parameters, such as brightness, sharpness and others. So you can set the values that suit the particular owner, which will fully enjoy watching TV channels. In addition to manually changing the setting modes, there is a whole list of preset parameters, which were originally set by the manufacturer. We’ve devoted this article entirely to this topic.
All you need is a TV remote control and a few minutes of your time. Adjusting the picture itself will not cause any difficulties. On the P/C press “setting” or “menu” button, depending on the model of the device. Then go to the tab “picture” and here adjust the required parameter: brightness, sharpness, color intensity, color combination, as well as the contrast. Thus, you can adjust the TV for your personal viewing comfort.
Image settings from the manufacturer
On each LG TV set, initially provides a choice of preset image settings, for this purpose, the remote control has a special button. This button allows you to switch between presets, without any additional action. Minimum number of available modes is three to five, this is enough for any program or movie.
“Dynamic”, “Standard”, “Cinema”, “User”, “Soft”. The list of available picture modes looks like this, although depending on models it can differ a little. Naturally, all these modes will differ in all parameters, brightness, color saturation, sharpness and so on, so each user can choose the most suitable for a particular movie, clip or TV show.
The custom mode requires a separate consideration, it switches the device from the factory settings to those that you set yourself. In essence, this is all that the owners of LG TV sets need to know about adjusting the image, these tips are sure to help you cope with the task yourself.
You can ask a question the masters of our service center by calling or writing your question on the feedback form.
Is it difficult to set up the TV properly? I’ll need the help of a wizard?
To achieve a proper display of the picture, is no more difficult than to perform the settings of the channels. It takes no more than 20 minutes of your time. To make your TV set a joy to the eye, you only need to adjust the image settings so that the test pictures are correctly displayed on the screen. How exactly it should be “right” you will see below. The test pictures have been chosen by experts so that you can enjoy any scene in terms of brightness, color, clarity, and contrast after adjusting.
Each single picture is used to configure one parameter. The Burosch test includes:
- Pictures for adjusting five basic parameters: Format, Brightness, Contrast, Color and Focus.
- Test pictures for simultaneous adjustment of several parameters
- Pictures for professional calibration
- Here are some real pictures to test
Test pictures for each setting
Used for single parameter adjustment. After adjusting this option, you will need to switch to a different picture and adjust another option.
Test pictures with multiple test zones
For use when quick adjustments are required or when an inexperienced user makes adjustments. With these pictures you can adjust five basic settings at once.
How to correctly adjust the picture on your LG TV
Many users wonder if they need to adjust the picture on their TV after purchasing. Producers of LG equipment, despite the large volume of production, perform debugging of all functions of TVs. But nevertheless it is worth considering that no less important role is played by factors and conditions in which to operate your LG TV. The source of the signal, the height at which it will be mounted or hung, the distance from which you plan to watch the TV, the size of the room and even the level of light in the room. Everything can play a part. So you can adjust the picture “for yourself” only at home after installing and running your TV. It’s easy to do it yourself, without calling a technician at home.
As with any technique, you should start adjusting the picture in your LG TV by reading the User Manual (instructions).
All modern LG TV models run on a Web OS operating system, which makes controlling options intuitive. The easiest way to adjust the image. turn on “Smart Picture Mode” function. When this mode is active, the TV itself selects the best picture settings for each broadcast.
- Press the Home button on the remote control. Locate the “Settings” (Gear icon) menu and then select the three dots in a row on top of each other in the upper right corner of the screen.
- Find “Screen” in the list that opens, in it you will see the line “Smart Picture Mode”.
- Activate the “Smart picture mode” with the “On” button.
Important: This option is not available in all regions.
If in your country Smart Mode is not active, you can adjust the picture on your LG TV manually.
- Press the “Home” button on the remote control. Find menu item “Settings” (gear icon), then in the upper right corner of the screen, select the three dots, located in a row on top of each other.
- Find the “Screen” line in the menu that opens. “Picture Mode Settings”. “Screen Mode”.
- All you have to do is decide which mode you want, depending on what kind and genre of content you’re currently watching.
Image setting modes in LG TV sets
“Standard”: Brightness, contrast and clarity settings in standard mode.
“Bright”: Once you turn on this mode, the picture on your TV will be brighter, contrastier, and clearer by increasing the values of these settings.
“Eco / APS” (depending on the model): When you activate this mode, the picture settings save power consumption.
“Cinema”: A mode designed for watching movies and TV series.
“Sports / Soccer / Cricket” (The presence of the mode and its name, depending on the model and country): Image settings allow you to watch sporting events in the best quality, including by increasing the sharpness of moving at high speed objects.
“Games”: Mode designed specifically to connect LG TV to game consoles. In particular the image is displayed without delay.
“Photo” (only available on Ultra HD televisions): A mode optimized for viewing images with minimal color loss.
ISFccc “Expert”: This mode is reserved exclusively for ISF-certified image setters.
In this mode, you can adjust the image with the help of test tables and samples.
What other picture settings you can adjust on your LG TV
In the “Picture Mode Settings” menu section (see above for how to open it), you can also adjust other. above), you can also adjust other picture settings:
“Backlight”: The stronger the backlight, the brighter the screen image.
“OLED Light”: Adjust the brightness of the OLED panel backlight.
“Contrast”: Adjusts the contrast of the light and dark parts of the image.
“Brightness”: Adjusting the brightness of the screen image.
“Sharpness”: Adjusting the picture sharpness.
“Color”: Adjusting the intensity of the colors in the image.
“Hue: Adjust RGB color balance. The closer to R50 the stronger the red tones are. The closer to the G50, the richer the green tones.
“Colour temperature”: Adjustment of the color balance from cooler to warmer shades.
Also in the “Image Settings” menu there is a sub-item “Advanced Settings” / “Advanced. Settings”. You can adjust a number of other settings here:
“Dynamic Contrast”: Corrects the difference between light and dark areas of the screen.
“Dynamic Color”: Adjusting the saturation and brightness of colors on the screen.
“Color Corrector”: Optimizes the color ratio of the screen for the visual perception of the viewer.
“Preferred Color”: Corrects individual image settings according to the owner’s personal preference.
“Super Resolution”: Increasing the clarity of a cloudy picture.
“Expanded Edge: Increase the detail on the edges of the screen.
“Sample”: Tables for setting used in “Expert” mode.
“White Balance: Adjust picture to warm or cold tones.
To reset the selected picture settings you need to select “Reset” item in “Picture Mode Settings” (how to open it, see above”).
Setting and sorting channels on LG TVs
Press SETTINGS on the remote control to begin making adjustments.
In the window that appears on your TV, select the CHANNELS tab, press the OK button. By pressing the OK button again we select the Auto search item.
Autosearch menu will appear on screen, select CABLE TV item, press OK button.
Operator selection item. Select OTHER OPERATORS and press OK.
Press ARROW DOWN button on the remote control to preset the cable TV type.
At the search options item, without changing anything, press EXECUTE
Automatic channel search process and its completion. At the end press the NEXT button
Press DONE button to complete the channel setting
Press LIST button on the remote control to start sorting the channels.
On the list appearing, press RED button on the remote control with one white dot.
Select channel to be moved using arrows on the remote control. To switch the channel list from digital to analog press upwards arrow on the remote control until the DIGITALS are marked. CAB.Switch TV to CABLE TV. After selecting the desired channel, press OK button. Press YELLOW button with three white dots.
Select a new channel position. Use the arrow buttons on the remote control to select a new channel position, if it is a digital channel, you can set a new channel number with the digits of the remote control.
Channel will save its new position after pushing ОК button.
You can sort digital channels in the same way
You can see a list of analog channels for your city here. You can use it as a guide when sorting.
Do not forget to select your city in the top menu.
Adjusting the picture on your LG TV. Adjusting the TV picture
For starters, what is a “proper TV setup”. If you’ve been to an electronics store at least once, you’ve probably noticed that all the televisions on display show differently. What does that have to do with it?? Which one is better? Let’s find out. I think you would agree that a television should not just show some picture, but should also introduce as little distortion as possible to the original content. The content itself is always created with an eye to industry standards and guidelines, and the main goal of any television. Bring you exactly the picture they want to show you. Everything is important here: the actor’s skin tone, the color of the sky at sunset, and which details of the image should be visible and which should be hidden. There are international standards that describe how the picture on your TV screen should be. You all probably met the abbreviation PAL, NTSC, or HDTV, but behind these letters the video signal properties and various image parameters are hidden. With the arrival of HDTV in our lives, most of the standards are immediately obsolete, and, in fact, the most relevant now is the REC709 standard, which is used in high definition television (HD) and Blu-ray video.
The general parameters for a proper picture are:. 6500K color temperature (D65). gamma linear, recommended value 2.22, for darkened room 2.4. Recommended brightness ~120 cd/m2. color gamut by REC709 (similar to sRGB gamut).
Unfortunately, modern manufacturers adjust their products frankly bad, because they are not interested in the fact that their displays conform to existing color standards, but in increasing sales of these displays. In an effort to sell more TVs, manufacturers are constantly trying to present “brighter blues” and “vibrant reds” than their competitors. They purposely intensify the brightness of certain colors to make products look more enticing on store shelves compared to their counterparts from other firms. At counters with seemingly identical products, the buyer will choose the brightest TV, or the one with colors that seem “deeper”. If manufacturers paid enough attention to the proper tuning of their products, all the televisions on the shelves would show a very similar picture.
The only sure way to get the right picture on the TV screen. hardware calibration. It consists in feeding reference images to the input of the TV and taking measurements from the screen. Then adjust the TV settings until the image parameters are as close as possible to the required standard. But this setting is quite difficult, it requires knowledge and above all the equipment.
Is it possible to make the picture on your TV more faithful without resorting to hardware adjustments? Here are some tips based on my experience of tuning different TVs.
What picture mode to choose (standard/dynamic/cinema)? On the absolute majority of TV sets the most correct mode is Cinema/Cinema. Don’t use the “Dynamic” viewing mode, it always gives a false image because of the non-linear gamma, and the brightness is too high, making it hard on the eyes, especially if you watch TV in a dimly lit or dark place.
Which color temperature mode to choose (cool/standard/warm)? On the vast majority of TV sets the Warmest mode is the closest to the standard color temperature (6500K). If there is a choice of Warm1/Warm2 (on Samsung TVs), determine for yourself which one is better. Usually it is Warm2, but there can be exceptions.
What settings are recommended to turn off to get the best picture? You must disable all settings that adjust brightness/contrast at the discretion of the TV. That is, you should turn off “dynamic contrast”, “power saving mode”, “light sensor”, “dynamic backlighting” and not use “Dynamic” image mode.
How to set the “contrast” parameter correctly? In fact, it is not correct to call this parameter “contrast”, because the contrast. is the ratio of the maximum brightness of the white field (white level) to the black level (the minimum luminance level of the panel). So, the parameter “contrast” in the TV menu changes exactly the white level, that is, the level of maximum brightness of the image.
For plasmas:. It is best to adjust the “contrast” setting in the dark;
Samsung plasma TVs have a parameter “cell brightness” (cell light), which has a great influence on the overall picture brightness. You can immediately set it to a value close to the maximum (18-20), and then follow the recommendations.
LCD TVs are set up a little differently. They have a “backlight brightness” parameter (sometimes called “backlight contrast”), which has the greatest impact on overall picture brightness.
For LCD/LED:. it is better to adjust in the dark;. Put the “contrast” parameter close to the maximum value (90-95);. Display the image with the white level window (100IRE) (links at the end of the article);. to set the “brightness of the backlight” parameter to the maximum value;. decrease the parameter “backlight brightness” until the image with white level (100IRE) stops “cutting the eyes.
I do not recommend using the maximum values of the “contrast” parameter, because some TV sets have non-linear color temperatures when set to the maximum value. Excessively bright picture (and for the real brightness in the TV are responsible “contrast” / “brightness of the backlight”) strains your vision and leads to eye fatigue, remember this when you adjust these parameters.
How to set the Brightness setting correctly? The parameter “brightness” defines the black level. To set it in the right position you can use the special image “Pluge pattern”. In the image the leftmost vertical line corresponds to black. To adjust the “brightness” parameter to the desired position, first increase it until you see all the bars clearly, then decrease the “brightness” parameter until the leftmost vertical bar fades into the background. In addition, you can use special setup disks, such as AVSHD (link at the end of this article), where in the “Basic Settings” section you will find the necessary images to set the basic TV parameters ( ).
Manually adjusting the LG TV picture. Adjusting the TV picture
In the store, all televisions show differently, and the customer usually chooses the brightest TV. But it has to do more than just show pictures. It has to distort the picture as little as possible. You’ll be offered the right settings when you buy a TV in a store, but you’ll have to pay for it. LG TVs have Smart TV technology, so the “smart TV” user can set it up independently, free of charge.
Plug the power cord of your TV into the mains. Connect an antenna or cable. Turn on your TV with the “Input” button on the remote control, pointing it at the screen. The TV comes with two remotes, a regular remote and a Magic remote, or you can attach a USB computer mouse. The easiest way to control your TV is with the Magic remote control. It looks like a mouse, but it works in space, not on the surface. The control of the settings is simple and intuitive. You can find an electronic version of the instruction manual on your TV screen. If the TV is turned on for the first time, the factory settings screen will be displayed. At partial or full tuning of your TV set the broadcasting of the last active channel will switch on. Press “TV” button to switch the TV mode on. To access the factory settings, go to “Options” in the main menu.
Select the TV settings by following the on-screen instructions according to your preferences. Press “Ok” if necessary. Specify the language of the display, “Home View”. as a setting of the best quality viewing mode, select the country of residence. Item “Auto search” allows to automatically scan channels and save the available programs.
Press “Menu” button to access the main menu for automatic program tuning. Use the navigation buttons to navigate to “Setup”. To start automatic tuning select “Execute” item. Start scanning and saving available programs. When scanning is complete, press “Exit” or go back to the previous menu, “Back”.
To select “Antenna” in the setting, press “Setting”. “Auto search”. “Antenna” in the main menu. Select “Execute” to start the automatic setup, then “Exit” to finish. Cable” mode is different in that you have to select “Cable” and then “Other operators” in the “Setting”- “Auto search” menu. Use the navigation buttons to select “Default”, “Full” or “User”. Make the appropriate setting using the numbers or navigation buttons (except “Full” mode). Then. “Close”. “Execute”, scanning and saving channels will start, when the process is completed. “Exit”.
If you select “Cable” mode, the selection of the cable service provider may vary from country to country, depending on the state of the networks. Finding and adjusting channels takes time, some channels may be missing. In doing so, follow the steps: “Setting”. “Auto Search”. “Cable” and enter additional values: frequency, gradient. characters, network ID. Get all these parameters from your cable service provider. You can manually enlarge the list of channels by means of “Manual tuning”. “DTV”. go to the number of the required channel, add programs.
Configure additional settings if necessary. Set the picture format by means of the menu “Ratio”, as well as by means of the quick menu and the main menu. For best results, select “16:9” mode.The screen is filled horizontally, “Original”. the best quality lossless image, “Normal”, “Full screen”, and others.
Make screen adjustments if you don’t like the factory settings. In order to change the picture mode, for optimal adjustment enter the main menu and select “Picture Mode” item. Use the navigation buttons to select one of the modes: “Vivid”, “Standard”, “Cinema”, etc.д. For the selected mode select the parameters for the best image quality: “Brightness”, “Backlight”, “Contrast”. In RGB mode, adjust the parameters of the image output from the computer: main menu, “Screen”.
Make sound quality adjustments. To do this, select “Sound”. “Sound Mode” in the main menu. Set the desired sound quality with the following modes: Standard, Music, Movies, Sports, Games. For the selected sound mode set the desired parameters: treble, bass, Surround X. The “Reset” function returns the settings to the factory defaults.
Your modern TV set can easily replace a computer. You can connect it to the Internet via Wi-Fi, connect it to a computer, use it as a monitor, watch movies in various formats from an external media, watch 3D movies using the included stereo glasses kit, watch digital quality (HD) movies.
For starters, what is the “right setting”. If you’ve been to an electronics store at least once, you’ve probably noticed that all the televisions on display show differently. What it has to do with? Which is better?? Let’s find out.
I think you will agree that the TV should not just show some picture, but also introduce as little distortion to the original content as possible. The content itself is always created based on industry standards and recommendations, and the main goal of any television. To give you exactly the picture you want to see. Everything is important: the tone of the actor’s skin, the color of the sky at sunset, and which details you want to see and which you don’t. There are international standards which describe what the picture on your TV screen should be. You must have met the abbreviation PAL, NTSC, or HDTV, but behind these letters they hide the properties of the video signal and the different parameters of the image. With the arrival of HDTV in our lives, most of the standards immediately became obsolete, and, in fact, the most relevant now is the REC709 standard, which is used in high-definition television (HD) and in Blu-ray video.
Enter the service menu
It’s also called the engineering menu. Intended to return all settings of the equipment to the factory settings at the time of installation, in other words, to the default settings. This service is available in all modern TVs and LG televisions are no exception. If the technique starts to work incorrectly and to give failures, then address to the service menu.
In all LG TV models the principle of connection to the service is practically the same, except for some differences. For Smart-TV equipment the actions are according to the following plan:
- Guided by the remote control, pressing the Menu button, enter the TV settings.
- Then find and enter the Default settings section.
- Select Reset parameters and set TV equipment to Default mode.
In this video you will learn about the TV settings in detail:
Most LG TV models can be returned to the Factory Settings mode with a separate remote control. This special device to perform the function of return is available in every LG service center. This remote control is not given.
There is a way, which replaces the special remote. It is enough to have an infrared smartphone based on the Android operating system at hand. The Smart Remote app is installed on it. Activating it and directing the phone to the TV you can freely use the engineering menu with the TV remote control.
Channels for LG TV models are different:
- The first thing to do is to visit the website of the operator of signal broadcasting services in the area;
- copy the parameters necessary to enter the “Settings” of the TV;
- Through the “Menu” you need to find the line “Channels” and go into it;
- selects the type of signal reception and the data copied from the provider’s website is entered;
- The “Search” is turned on.
- Modern televisions have a Home key on the remote, which you can use to enter setup mode. In older models adjustment is made through the “Menu”.
- Next, you must enter “Options” mode and select the country. Its name depends on the year of manufacture of TV. If the equipment is released after 2011. is set If an earlier manufacture, select one of the European countries.
- Check the installation language, it should be Russian.
- In the Settings section, select “Auto Search”.
- You should be prompted for Cadel. It will not appear only for two reasons: the wrong country or missing in the TV-receiver.
- You will be prompted to enter the data modulation, speed, network and frequency.
- Starts the “Search” and automatically sets the digital and on-air channels.
All LG models have the function “Auto update”, which can be deactivated, so you do not have to reset the TV after each reset. To do this, go into “Settings”, find and select Digital Cable Setup and lock “Auto Update”.
Don’t forget to turn off the auto-update