How to open the cover of a redmi 7 phone

08.09.2021 Buris Article

How to open a Xiaomi Redmi phone case

How to open a Xiaomi phone is a question that may arise for owners of phones of this brand. There are many reasons for this. Starting from replacing a card or battery, ending with the need to carry out serious manipulations. The article provides information on how to open the phone cover yourself. How to replace the necessary parts. What are the benefits of such manipulation?

Sequencing

When the latches have succumbed to action, slowly and carefully remove the back cover on Xiaomi Redmi or Mi Max. Smoothly open the case, seeing there a train connecting the back surface to the touchscreen. Carefully remove the ribbon cable to detach the front panel.
Now we have before us the “stuffing” of the Mi smartphone. Here we see the top panel with the installed chip and cameras. The battery is located under them. Most often, the question of how to remove the back cover of Xiaomi Redmi or Mi Max appears when it is necessary to replace the cameras or the battery. It is also relevant if the touchscreen is damaged, but without additional complex equipment, you definitely cannot solve this task at home.
Although the insides of the smartphone are open to us, we still cannot extract them. In addition to cameras. we can get them if we open the seal, which can be easily pushed off with any flat object at hand.
If you disassemble the phone to replace the battery or dig into the chip, then you have to work with a screwdriver. Internal elements are bolted to the cover. We unscrew them with a screwdriver, be sure to fold them in a conspicuous place so as not to lose, and only after that we can continue parsing. Loose bolts need to be given special attention. those that are attached from the top are longer than those screwed from the bottom. Therefore, put them in different places so as not to get confused.
After unscrewing the bolts, open the protective panel from above, and a chip will appear in front of you. It is not recommended to make any changes to its configuration on your own.
I close the back cover in the same way as I open it, but, of course, the steps are performed in the reverse order. The main thing is to be careful and act carefully, and then everything will work out.

To get a more accurate idea of how to properly open the Mi Max phone and other models from Xiaomi, we suggest that you familiarize yourself with the training videos.

Xiaomi has made affordable smartphones from the very beginning, while maintaining the quality of the devices themselves. From year to year, they have developed their Redmi line, gradually improving the characteristics of smartphones, their build quality and the materials from which they are made. The first smartphones of the Redmi line made it easy to open the devices, change the battery, all this was possible thanks to the removable back cover. But modern Redmi devices, for the sake of design, are deprived of such an opportunity. You will not be able to remove the back cover in a couple of seconds, as it was, for example, in the Redmi 2. Now, to disassemble the smartphone, you will need a special tool (preferably) and some free time. So, as you understood from the name, in this article we will analyze how to open the cover of Xiaomi Redmi 4A.

How to open a Xiaomi phone?

Having prepared the necessary elements, you can start opening your smartphone. The sequence of actions how to open the back cover of Xiaomi is as follows:

The tray for the SIM card comes out. There is no need to leave it. It will interfere with the removal of the cover.
Latches open along the perimeter of the gadget. It is important to make an effort here, but do it carefully. It is necessary to proceed gradually from one corner of the phone to the next.
The back cover of the smartphone is carefully and slowly removed. A loop will appear, which connects with the back surface to the touchscreen. The train is neatly removed. This will open up the front camera for video.

After removing the back cover, the user will see the chip and cameras. A battery is installed under them. It can be replaced if necessary. This must be done with a screwdriver. The elements located inside are secured with bolts.

After unscrewing the bolts, open the protective top panel. The chip will be presented to the attention. It is not recommended to touch it. You shouldn’t make your own changes to the configuration.

Disassembly tools required

To open the phone cover yourself, it is worth preparing special tools. Neatly, without damage and scratches, it will be possible to carry out the manipulation with the help of such things as:

Spatula for parsing phones;
If it is not there, you can take a plastic card;
Paperclip to remove the SIM card;
Screwdriver or tweezers;
New items.

The latter must be purchased in advance from a trusted seller. The quality of the parts to be replaced must be worthy. Otherwise, parsing the phone will not bring the desired result.

How to open the SIM card slot?

Without opening the SIM card slot, it is impossible to carry out subsequent work related to the disassembly of the device. The tray is removed like this:

Using a spatula, carefully pry off the joint. This is where the back panel adjoins.
After detaching the fasteners, the case opens.
A sensor cable is located under the back side. It detaches from the back panel.

The user will now be able to see the phone’s 4x battery and its processor. The mechanics of the device are attached to the body with small bolts. After unscrewing them, you can disconnect the battery or change the lens.

On Redmi devices or this one, you can replace everything except the display. After completing the repair work, it is necessary to collect. Required to proceed in reverse order.

It is difficult to disassemble Redmi or note phones without special tools. Their back covers are securely fixed. There are no voids. The ideal option would be to use a spatula. With its help, you can carry out minor work related to disassembly and repair technical processes.

Apart from the scapula, nothing can be used. Sharp objects can damage your miui gadget. Additionally, you need to have a paper clip and a screwdriver at your disposal. You cannot change the SIM card and battery without them.

Tool

For this operation, how to open the cover of Xiaomi Redmi 4A, we need a special spatula for opening mobile devices. It is made of plastic and the likelihood that it will somehow damage your phone during opening is minimal.

As we can see in the picture above, there are different types of scapula, but for our operation it does not really matter which scapula we use. If there is no such instrument, and it is not possible to find it, then you can use any other thin but solid object, for example, a guitar pick or something like that, the main thing is not very sharp.

Summing up

If you need to disassemble a Xiaomi phone 4 x, max and 5a, it is not necessary to seek professional help. This Chinese manufacturer produces exclusively monolithic smartphones. Accordingly, the procedure for disassembling devices can be difficult. It is for this reason that the case must be disassembled with special tools. Follow the instructions and act very carefully.

We offer you a short instruction on how to open the back cover on Xiaomi Redmi phone (including models 3 and 4), Mi Max, etc. Since almost all phones have the same design, this guide can be used for most mobile gadgets.

How to open the phone cover of Xiaomi Redmi 5

In this article, I want to show in detail and visually how to remove the cover on the Xiaomi Redmi 5, 5A, 5S and 5X phone. Why, for example, to change the battery of your smartphone yourself. Previously, this did not present anything difficult and you could do everything yourself. Now, on modern thin devices, this has become much more difficult. And still, if you are more careful for at least a day, you can do everything yourself! The instructions will also be relevant for those who want to open the lid on Xiaomi Redmi 4, 4S and 4X.

For this simple process, we need a strong, thin plastic spatula or spatula. It is also advisable to have a plectrum or at least a plastic card (credit card, discount card, etc.) at hand. It is undesirable to use metal instruments, as they can damage the device.

Attention! Before opening your smartphone, be sure to remove the SIM card tray from it using the supplied key. Otherwise, she will not let you disassemble the phone.

To open the cover of Xiaomi Redmi 5, we take it in our hands and turn it towards us with the end side, on which the charging connector and speakers are located.

We try to carefully detach the phone case with a spatula so that a gap forms. It is best to do this from the corners, since it is the easiest way to pick up the case cover there.

How to Open Back Cover Redmi Note 7, 7 Pro | Remove Back Panel | Redmi Note 7 Pro Back Cover

After you have managed to make a gap, you need to enlarge it along the rest of the case, carefully disconnecting the latches along its edges using a pick or a plastic card. As soon as you manage to detach most of the latches, you can open the cover of the Xiaomi Redmi 5, but this must be done carefully. The fact is that there is a fingerprint scanner on the back of the smartphone. If you pull the cover hard, you will tear off the cable going to the scanner.

Therefore, it is necessary to carefully detach the cable from the device. Only after that, you can remove the phone cover completely and then change the battery, repair it, or perform other operations with the device.

How to open the back cover of Xiaomi?

The back cover can be removed in another way. This process is required when it becomes necessary to replace the battery of the Mi gadget. The user must perform the following actions:

A paper clip prepared in advance is inserted into a special hole for a SIM card and pressed;
The tray is removed;
To prevent scratches, it is worth sticking glass or film on the screen;
A special blade moves along the body, along the perimeter;
If one edge snapped off, while others remained closed, you do not need to jerk the cover off. You can open the device with a suction cup or scissors;
After processing the latches, you can lift the cover;
The plume is lifted separately with tweezers.

This process is relevant for Xiaomi models. There may be only minor differences. Phones without a fingerprint may not have a menu ribbon cable. Then you can start replacing the battery.

If you use basic tools, have a certain amount of time at your disposal, you can change the battery yourself. To achieve this goal, you need to follow these steps:

The phone is disconnected. The SIM card slot is removed. The end screws are removed with a screwdriver.
Pick up the lid with a mediator. This should be done in the place where the two halves of the case are connected.
Light sliding movements need to increase the gap between the elements of the body along the perimeter.
Xiaomi cover opens and removable.
The power cable is disconnected from the system board. To do this, you need to pick up the plug.
Screws are removed with a screwdriver.
The module is removed.
You need to pull on both black labels on the battery. This will remove the protective film from the battery.
The battery is pushed in with a sharp object and pushed out of the hidden slot.

The old battery can then be replaced. If you follow this guide, you can replace the charger without losing the quality of the phone itself.

Redmi 7 how to open back cover

How to open a Xiaomi phone?

Having prepared the necessary elements, you can start opening your smartphone. The sequence of actions how to open the back cover of Xiaomi is as follows:

The tray for the SIM card comes out. There is no need to leave it. It will interfere with the removal of the cover.
Latches open along the perimeter of the gadget. It is important to make an effort here, but do it carefully. It is necessary to proceed gradually from one corner of the phone to the next.
The back cover of the smartphone is carefully and slowly removed. A loop will appear, which connects with the back surface to the touchscreen. The train is neatly removed. This will open up the front camera for video.

After removing the back cover, the user will see the chip and cameras. A battery is installed under them. It can be replaced if necessary. This must be done with a screwdriver. The elements located inside are secured with bolts.

After unscrewing the bolts, open the protective top panel. The chip will be presented to the attention. It is not recommended to touch it. You shouldn’t make your own changes to the configuration.

How to open the cover of a Xiaomi phone

We offer you a short instruction on how to open the back cover on Xiaomi Redmi phone (including models 3 and 4), Mi Max, etc. Since almost all phones have the same design, this guide can be used for most mobile gadgets.

Sequencing

When the latches have succumbed to action, slowly and carefully remove the back cover on Xiaomi Redmi or Mi Max. Smoothly open the case, seeing there a train connecting the back surface to the touchscreen. Carefully remove the ribbon cable to detach the front panel.
Now we have before us the “stuffing” of the Mi smartphone. Here we see the top panel with the installed chip and cameras. The battery is located under them. Most often, the question of how to remove the back cover of Xiaomi Redmi or Mi Max appears when it is necessary to replace the cameras or the battery. It is also relevant if the touchscreen is damaged, but without additional complex equipment, you definitely cannot solve this task at home.
Although the insides of the smartphone are open to us, we still cannot extract them. In addition to cameras. we can get them if we open the seal, which can be easily pushed off with any flat object at hand.
If you disassemble the phone to replace the battery or dig into the chip, then you have to work with a screwdriver. Internal elements are bolted to the cover. We unscrew them with a screwdriver, be sure to fold them in a conspicuous place so as not to lose, and only after that we can continue parsing. Loose bolts need to be given special attention. those that are attached from the top are longer than those screwed from the bottom. Therefore, put them in different places so as not to get confused.
After unscrewing the bolts, open the protective panel from above, and a chip will appear in front of you. It is not recommended to make any changes to its configuration on your own.
I close the back cover in the same way as I open it, but, of course, the steps are performed in the reverse order. The main thing is to be careful and act carefully, and then everything will work out.

To get a more accurate idea of how to properly open the Mi Max phone and other models from Xiaomi, we suggest that you familiarize yourself with the training videos.

How to open the SIM card slot?

Without opening the SIM card slot, it is impossible to carry out subsequent work related to the disassembly of the device. The tray is removed like this:

Using a spatula, carefully pry off the joint. This is where the back panel adjoins.
After detaching the fasteners, the case opens.
A sensor cable is located under the back side. It detaches from the back panel.

On Redmi devices or this one, you can replace everything except the display. After completing the repair work, it is necessary to collect. Required to proceed in reverse order.

Summing up

If you need to disassemble a Xiaomi phone 4 x, max and 5a, it is not necessary to seek professional help. This Chinese manufacturer produces exclusively monolithic smartphones. Accordingly, the procedure for disassembling devices can be difficult. It is for this reason that the case must be disassembled with special tools. Follow the instructions and act very carefully.

Most modern Xiaomi phones have a case without a removable cover. Therefore, in order to gain access to the battery and other contents of the gadget, you will have to disassemble it. If you do not know how to remove the back cover on Xiaomi Redmi 5 Plus. the following step-by-step instruction will help you.

In what situations might you need to remove the cover? When you need to replace the battery with Xiaomi Redmi 5 Plus, or make a “testpoint” to resurrect the phone after an unsuccessful firmware. Or, for example, to later replace the screen.

Disassembly tools required

To open the phone cover yourself, it is worth preparing special tools. Neatly, without damage and scratches, it will be possible to carry out the manipulation with the help of such things as:

Spatula for parsing phones;
If it is not there, you can take a plastic card;
Paperclip to remove the SIM card;
Screwdriver or tweezers;
New items.

The latter must be purchased in advance from a trusted seller. The quality of the parts to be replaced must be worthy. Otherwise, parsing the phone will not bring the desired result.

How to remove the back cover?

1) First of all, turn off the phone. This is done to avoid glitches and device malfunctions.

2) We take out the SIM card slot. It interferes with the removal of the cover and can deform the microcircuits.

It is advisable to use special tools in the process of work, such as a thin pick or a plastic spatula. Alternatives: plastic card or nails.

The process requires caution and concentration on your part. The lid itself is fastened with plastic latches over the entire area of the case, which must be carefully pry off with a tool.

If you need to remove the back cover on Xiaomi Redmi 5 Plus, but you are afraid of damaging the phone, then it is better to contact any ASC (authorized service center) Xiaomi for this task. Experts will help you solve this problem for a fixed fee indicated in the price list and without hidden fees.

You can cope with the task yourself. The main thing is not to be afraid, be careful, and follow the instructions to disassemble the phone case and remove the back cover on Redmi 5 Plus.

We start at the corner of the bottom end of the case, where the micro-USB port and speaker grill are located. Prying the latches on all sides, you will find that a gap has formed between the cover. All that remains is to carefully detach the back cover from the phone.

4) In the phones of the Xiaomi Redmi series, there is a fingerprint scanner on the back panel. Inside the scanner sensor is connected to the board with contacts. In order not to damage anything, you need to carefully disconnect the contacts.

After completing these simple steps, you will remove the back cover on the Xiaomi Redmi 5 Plus and get access to the “internal stuffing” of the phone.

Warning: A non-numeric value encountered in /home/xiaomi7/xiaomishka.ru/www/wp-content/themes/publisher/includes/func-review-rating.php on line 212

Warning: A non-numeric value encountered in /home/xiaomi7/xiaomishka.ru/www/wp-content/themes/publisher/includes/func-review-rating.php on line 213

Hello dear friends! My name is Mikhail Xiaominko, I am a fan of Xiaomi technology, gadgets and smartphones. Having access to information, I try to provide interesting and high-quality content for Xiaomi readers. I share the latest news and exclusive materials.

Weather

In the “Weather” application, you can see the current weather conditions and the forecast for 5 days. Start page displays 24-hour forecast, wind speed and direction, perceived temperature, UV index and pressure.

Key features and functions

Brief overview of technical characteristics:

Characteristic	The value of Xiaomi Redmi 7A	The value of Xiaomi Redmi 7
OS version	XiaomiMiu based on Android 9.0 Pie	Xiaomi Miu based on Android 9.0 Pie
Number of Cores	eight	eight
Processor frequency	1.95 Hz	1.8 Hz
RAM size	2 GB	3 GB
Built-in memory	16 GB or 32 GB	32 GB
Display (type, diagonal)	IPS, 5.45	IPS, 6.26
Resolution, pixel density	1 440х720, 295PPI	1 920×1 080,
Main camera	15 megapixels	122 megapixels
Front-camera	5 megapixels	8 megapixels
Maximum memory card size	256 GB	512 GB
Number of slots for SIM-cards, type	2, nano-SIM	2, nano-SIM
Battery type	Lithium polymer, non-removable	Lithium polymer, non-removable
Battery capacity	4000 mAh	4000 mAh
Dimensions (HxWxT)	146.3×70.41×9.55 mm	158.72×75.58×8.47 mm
Weight	165 g	180 g

The fingerprint scanner.
Fast charging technology.
Automatic subscriber location.

h2 3.0.0.0.0.-

How to set up your camera

The quality of the Xiaomi Redmi camera provides good photos with standard settings. It is also possible to set the optimal settings yourself. It is better to do this following the detailed, original instructions for the device.

Advice! If after trying to configure the camera, it starts to shoot worse, use the factory reset option to return to the original settings.

Scanner

The app scans QR codes, barcodes. The factory settings of Xiaomi Redmi 7 (7A) help to identify items, track time, manage documents, make translations from Chinese to Russian. Work with the scanner is carried out through the video camera of the smartphone.

In addition to scanning barcodes and QR codes, you can also recognize codes on images saved in the gallery by clicking on the icon in the upper right corner of the start page.
Scan the product you want to purchase to find it on online e-commerce platforms.
This feature allows you to save scanned documents as images or OCR text and save it as a note. The recognized text can also be copied to the clipboard.

h2 36.0.0.0.0.-

Camera control

Voice control of the camera is located in the “Camera” application, in the “Modes”. Receiving and executing a command is signaled by the sound of the opened shutter and a pulsating circle at the bottom of the screen.

Calculator

Access to the calculator is through the “Settings Menu”. Xiaomi Redmi 7 has several types of calculators:

Regular calculator.
Engineering calculator can perform operations with trigonometric functions, angular radians and calculate roots.
The converter allows you to convert currencies, as well as convert values from one measurement unit to another.
Mortgage calculator simplifies financial planning as it can calculate repayment methods and interest rate.

h2 33.0.0.0.0.-

Calendar, clock, weather

Opening and managing the calendar, setting the clock, weather notifications are configured through the “Settings” menu. The option to update the time and time zone from the Internet is available.

Gestures

To activate the function, you need to enter the “Settings menu”, then into the “Borderless screen” and switch to the “Full screen gestures” window.

Controlling icons, menus, keyboard input using gestures:

Touch the display: open an application, select a menu item, press a button or enter a character using the on-screen keyboard, tap.
Press and hold: To access options, press and hold an item for more than 2 seconds.
Swipe: Swipe left or right on the desktop or Apps screen to view other panels. Swipe up or down to scroll through a webpage or list.
Pinch: Spread your fingers apart on a webpage, map or image to zoom in, and vice versa towards the center to zoom out.
Move: press and hold an item to move.
Double tap: Double tap on a web page or image to zoom in.

Important! The function of customizing gestures is on the Miui 9.5 firmware.

Tool

For this operation, how to open the cover of Xiaomi Redmi 4A, we need a special spatula for opening mobile devices. It is made of plastic and the likelihood that it will somehow damage your phone during opening is minimal.

Precautions

During the execution of such work, nothing should bother you (i.e. there should be a workspace and there should be no unnecessary things). In addition to all this, you must not use sharp objects. Some users open the lid with a knife, which is strictly prohibited. You can damage the screen, battery, board, case, break the latch, and much more. If you do not have a special tool, it is better not to start disassembling.

Xiaomi smartphone how to open the back cover

The process itself

First of all, you need to remove the SIM card tray, so grab a paper clip and pull out the tray. At the same time, it is advisable to turn off the power of the smartphone.

Then we take a spatula and we will need to pry off the back cover of the smartphone. Since the cover snaps into place around the entire perimeter, you will have to do it along the entire body of the phone. This action will require a lot of effort and most likely the first time you may not succeed.

After you follow the process shown above around the entire perimeter of the case, the back cover can be easily removed from the back of the smartphone.

At this point, the process can be considered complete, as you can see, opening the cover of Xiaomi Redmi 4A turned out to be very easy. Yes, it is more difficult than in older models, but this option for attaching the back cover also has its advantages: more interesting design and less chance of unwanted backlash and squeaks.

Everything about the Internet, networks, computers, Windows, iOS and Android

Actions

It is necessary to open it along the perimeter, and not from different angles and sides, otherwise you can break half of the latches, and then the lid will not hold.

We lift the lid very carefully, and we see the cable, which must be disconnected. If there is no cable, then just remove the cover. The main thing is not to make sudden movements, so as not to damage the insides of the phone.

If the lid does not open and you fail, it is better to stop further actions.

How to open the phone cover of Xiaomi Redmi 5

Attention! Before opening your smartphone, be sure to remove the SIM card tray from it using the supplied key. Otherwise, she will not let you disassemble the phone.

To open the cover of Xiaomi Redmi 5, we take it in our hands and turn it towards us with the end side, on which the charging connector and speakers are located.

We try to carefully detach the phone case with a spatula so that a gap forms. It is best to do this from the corners, since it is the easiest way to pick up the case cover there.

After you have managed to make a gap, you need to enlarge it along the rest of the case, carefully disconnecting the latches along its edges using a pick or a plastic card. As soon as you manage to detach most of the latches, you can open the cover of the Xiaomi Redmi 5, but this must be done carefully. The fact is that there is a fingerprint scanner on the back of the smartphone. If you pull the cover hard, you will tear off the cable going to the scanner.

Xiaomi is a well-known brand. They make pretty high-quality smartphones, and in addition to the proprietary MIUI shell, they are famous for their excellent build. But sometimes there are times when you need to disassemble a smartphone, and instead of taking your device to a workshop or service center, the user begins to try to disassemble it himself. This is what this article will be about.

The thing is that Xiaomi smartphones are non-separable, that is, you simply cannot remove the back cover and see there a battery with connectors for SIM cards and a flash drive. To open the cover of Xiaomi Redmi 4, 4a, 4x, you need to try hard and put a lot of effort.

Attention! This article is written for informational purposes only and is not a call to action. All manipulations you perform at your own peril and risk, therefore the site administration is not responsible for your actions.

So, to remove the cover on a mi4 or 3s, you need a special tool. There is a small metal spatula with which the masters disassemble the phones. If you don’t have one, then you need at least a guitar pick, or, in extreme cases, a plastic card.

This manual applies to models 5 plus, Mi a1, note 3, laptop versions, pro, etc.

Why remove the cover?

People disassemble their smartphone for various reasons: someone needs to change the battery, someone has a loop unhooked, and someone just for the sake of interest and for personal experience. In general, you can think of many reasons to open the back cover, but if your phone is working fine, then it is better not to open it, because due to lack of experience, you can make an unexpected breakdown.

Sources:

http://set-OS.ru/kak-otkryit-kryishku-Xiaomi-Redmi/
http://9726552.ru/kak-otkryt-kryshku-telefona-ksiaomi/
http://gadget-bit.ru/nastroyka-Xiaomi-Redmi-7-7a/
http://xnb1aagcxydktij4ge.xnp1ai/smartfon-Xiaomi-kak-otkryt-zadnjuju-kryshku/