How To Make A Stick For Phone

Probably, many smartphone owners are interested in how to make a stylus with their own hands. This is due to the fact that such details are again beginning to be increasingly implemented in many devices. Usually these unique products come with tablets or phones, but if you lose them, you will have to buy new mini pens, and they cost a lot of money.

The easiest way to create a stylus

How to make a stylus for a tablet with your own hands? This process is very simple and economical, since everyone has the necessary materials on the farm. Thanks to the creation of such a part, it will become much more convenient to work with a smartphone. For the effective functioning of the device, it must be arranged so that it can serve as a conductor of static charge between the fingers and the display of equipment. Before making a stylus for a smartphone, you need to prepare:

  • dense aluminum foil;
  • cotton swab;
  • pen (ballpoint);
  • Scotch;
  • scissors.

How to make a stylus on your own? To do this, open the ballpoint pen and remove the rod from there. Then you need to take a cotton swab and cut it at an acute angle. After this process, it is required to apply the obtained element to replace the rod. You need to fix the stick using tape. At the end of this stage, you should take the foil, wrap the handle a little higher than the cotton swab. It is recommended to wrap tightly, after which you need to fix the upper part of the handle with tape. Next, moisten a cotton swab. After that, you can already start work. It is very important that the fingers touch the foil. This will facilitate the passage of static electricity, which will allow you to interact with the screen. But such a home-made stylus has a small drawback: it requires periodic wetting of the cotton tip. Therefore, before creating it, you need to think about your convenience.

How to Make a Stick for Phone

Stylus for capacitive touch screen

You can make a stylus for a capacitive screen with your own hands. To make it thin and convenient to use, it is necessary to apply:

  • steel washer;
  • aluminum rod;
  • skein of thread.

If the inventory list is at hand, and it is completely satisfied, then you can go directly to creating a stylus. To do this, solder the handle / rod to the washer at an angle so that it becomes as compatible as possible with the natural position of the human limb. But such a design can scratch the display, and the thinner it is, the worse. You can fix this defect with the help of threads. To do this, it is necessary to wrap them around the annular edge of the device. To strengthen the contact, you need to bring your finger close to the smartphone. Such a device does not leave scratches on the capacitive surface, and a thin screen responds very quickly, so there is no need to press on the device. Also, if you make a stylus for a smartphone or tablet with your own hands according to this scheme, then you can not worry about the appearance of traces and scratches on the screen. It is convenient to use and even able to wipe the display, so that it will always be clean.

If you know how to make a stylus for your phone, then you can not spend money on the purchase of such a device.