How to make a homemade phone case

Article

25 Amazing DIY Phone Case Life Hacks! Phone DIY Projects Easy and Cheap

Fabric mobile phone case

You will need: thick fabric, thread with a needle, acrylic paints, colored paper, scissors, glue, stencil, ruler.

Master Class

  • Lay a sheet of paper horizontally.
  • Put your phone on top.
  • Wrap the phone to the end of the sheet.
  • Fold the bottom of the paper several times up to the phone.
  • Fold the triangles at the bottom of the sheet up.
  • Fix the folds with glue.

DIY | How to make an Silicone Phone Case | Tutorial

I recommend watching the video master class!

Master Class

  • Pour some beads onto the table.
  • Apply a drop of hot glue to the cardboard.
  • Dip the tip of a toothpick into a drop of hot glue.
  • Touch the bead with a toothpick.
  • Dip the bead in a drop of hot glue.
  • Glue the bead to your phone.
  • Glue the rest of the beads on the back and side covers of the phone in the same way. Please note that the work is painstaking and will take a certain amount of time, but you need to work at a pace, as hot glue quickly hardens.

Master Class

  • Cut out the sheets and sides of the notebook with a clerical knife.
  • Divide one side of the notebook in half, marking with a simple pencil.
  • Cut along the mowing line to the outermost fiber of the notebook cover with a clerical knife, then cut a half-centimeter-wide strip at this point for future folds.
  • Glue the inside of the notebook cover.
  • Contour the cover of the notebook with felt and cut it out.
  • Place the felt on the inside of the notebook cover, then cut the felt along the side fold.
  • Glue a felt blank to the cover of your notebook.
  • Outline the phone on a piece of cardboard, then cut out the blank.
  • Glue the cardboard to the felt and cut it to the shape you want, stepping back from the cardboard a centimeter.
  • Cut in two corners of the felt on each side, then glue the corners.
  • Glue two elastic bands across to this workpiece.
  • Glue the workpiece onto the bending edge half.
  • Put on your phone case.

I recommend watching the video master class!

Master Class

  • Take a balloon, inflate it and don’t tie it.
  • Place the phone face up on top of the balloon.
  • Press the phone into the balloon, gradually deflating it.
  • Release the balloon when there is little air and continue to press the phone into the balloon.
  • Wait until the balloon wraps around the phone, this is a sign that the case is ready.

I recommend watching the video master class!

Master Class

  • Measure the dimensions of the phone, add a centimeter to the length, and two to the width, remember the parameters.
  • Make two identical leather blanks with the desired parameters.
  • Round the corners of the workpieces.
  • Make small round holes in the cardboard template with a distance of 5 mm.
  • Fold the leather blanks with the inside side to each other and attach the template.
  • Make holes with pliers along the bottom and sides. Clamp the template.
  • Thread two needles on both sides.
  • Sew from the side in this way: go through the first hole with one needle, straighten the thread, then sew in turn with two needles, pulling them into one hole, but in different directions.
  • Sew the entire cover, then secure the thread several times.
  • Make two through holes centimeter apart on the top of the case.
  • Put on the ends of the decorative thread Egleta.
  • Pass a decorative thread through the through holes and tie a bow.

I recommend watching the video master class!

make, phone, case

Mobile phone case made of rubber bands

You will need: elastic bands of 3 colors in the amount of 500 pieces, a hook, a weaving machine (there should be 2 rows on it: the holes in the bottom row should look to the right, and the upper ones. to the left).

Master Class

  • Draw two times the phone on cardboard with a distance of half a centimeter and cut.
  • Make two folds along the lines, in the center of the workpiece.
  • Glue one side of the case to the back of your phone.
  • Attach a thin elastic band to the case so that the case can be closed.

I recommend watching the video master class!

Master Class

  • Put on the elastic bands from the top row of the second pin, then put them on the cross on the third pin of the bottom row.
  • Slip the elastic bands cross to cross, from the second pin of the bottom row to the third pin of the top row.
  • Slip the rubber bands in the same way from the third pin of the top row to the fourth pin of the top row. There should be three crosses.
  • Pass two pins in the center, weave four more crosses in the same way. There should be four crosses and two free pins should remain at the edges of the machine.
  • Put the rubber bands on the top and bottom pins of the next row facing opposite. In the same way, put the rubber bands on all the pins of the last row.
  • Turn the machine vertically towards you so that the top pins are facing you.
  • Put on without crossing the first elastic by one bottom and one top.
  • Attach without crossing the rest of the elastic along the top row. one after the other, without missing the two middle pins.
  • Make the bottom row in the same way, connecting with an elastic band on the second side.
  • Crochet two rubber bands from the bottom row of each pin.
  • Pass the middle pins, there should be two rubber bands on each pin.
  • Take rubber bands of a different color and make the next row in the same way as the third.
  • Remove the two lower loops in a circle and again put on elastic bands of a different color in a circle, then remove the lower loops.
  • Make two rows in the same way, alternating colors. (For one row. put on the eyelets once, then remove).
  • Make a hole for the screen in this way: turn the machine vertically, the bayonets of the left row should be facing you. Remove the bottom elastic from the third pin of the left row and put it on the fourth. The last loop should be thrown onto the seventh pin.
  • Remove the remaining tab from the middle five pins. There should be three pins with rubber bands on the sides.
  • Work the next row in this way: start with the third working pin to weave elastic after elastic in a clockwise direction. Leave five pins on one side.
  • Remove the lower elastic bands, there should be two loops on the pins.
  • Knit eleven more rows, alternating colors in the same way.
  • Work a row, clockwise, filling in all the pins.
  • Remove the lower rubber bands from the pins, and do not remove from the five not previously used.
  • Pass two work pins in the row where the pins are not tied, remove the lowest loop from the third pin and slide it over the next pin. Do this until the last two pins are empty. Knit one row.
  • Take the machine vertically, remove the lower loop from the right row of the second working pin and put it on the next bayonet. The last loop should be put on the fourth working pin.
  • Remove the lower hinges from the third and second pins.
  • Slip on the loops in a circle, leaving two pins empty, then remove the lower loops.
  • Slip the elastic to the next row using all pins. Remove the hinges and do not touch the pins, which have two elastic bands.
  • Swap the top and bottom stitches on the first pin, transfer the top loop to the next pin. Connect the structure.
  • Remove one lower loop from the next two pins and transfer them to the next pin.
  • Knit a row in the usual way.
  • Close the cover in this way: make a row of crosses as in the beginning, using all the pins. Make the next row between opposite pins with crosses.
  • Remove the bottom loops and leave the elastic bands from which the eights were made. There should be three loops on the lower pin.
  • Slip the bottom loop of each pin onto the next pin. In the same way, do the next row.
  • Make a knot with an extra elastic band on the right side, then remove the cover from the machine. Hide the knot and straighten the protruding hinges, then put the case on the phone.

I recommend watching the video master class!

Master Class

  • Pour some beads onto the table.
  • Apply a drop of hot glue to the cardboard.
  • Dip the tip of a toothpick into a drop of hot glue.
  • Touch the bead with a toothpick.
  • Dip the bead in a drop of hot glue.
  • Glue the bead to your phone.
  • Glue the rest of the beads on the back and side covers of the phone in the same way. Please note that the work is painstaking and will take a certain amount of time, but you need to work at a pace, as hot glue quickly hardens.

Leather mobile phone case

You will need: leather of any color, scissors, clips, thick thread, a cardboard template, tongs for setting eyelets, two gypsy needles, for decoration (two eglets, decorative thread), a pen, a ruler.

Mobile phone case made of cardboard

You will need: a sheet of cardboard of any color, scissors, glue, a marker, an elastic band.

24 AWESOME DIY PHONE CASE IDEAS TO MAKE IN NO TIME

Master Class

  • Take the phone, put it on the felt and circle the phone, stepping back from the edge of a centimeter. Make two such blanks.
  • Sew the workpieces with the outside seam together.
  • Cut out small balloons and a house from felt.
  • Glue the house down below.
  • Embroider with a dotted line for the balls.
  • Glue the balls in layers.
  • Wait until it is completely dry and use the cover.

I recommend watching the video master class!

Mobile phone case made of threads

You will need: yarn, scissors, glue gun, scotch tape, parchment paper, ruler, baking paper.

Mobile phone case made of rubber bands

You will need: elastic bands of 3 colors in the amount of 500 pieces, a hook, a weaving machine (there should be 2 rows on it: the holes in the bottom row should look to the right, and the upper ones. to the left).