How to Install Mac Os on a Laptop

Apple’s operating system is rightly considered exemplary. And indeed it is. The combination of perfect looks and amazing performance has always made “Mac OS” much better than the Bill Gates brainchild. And this is not discrimination at all, but a statement of fact. Operating systems from “Microsoft” always lagged behind “Makov” in terms of design and performance. One day, Apple decided to switch to processors from “Intel”. From now on install “Poppy” on a regular PC made possible. However, not all so simple. Installation “Poppy” on a PC or laptop can result in severe nervous breakdown, because not all hardware is supported “Poppy”. And to get it under it is very problematic. But we still try. So, before you instructions on the topic “Install Mac OS on a laptop“.

What are the risks when installing on a PC

There are a lot of risks, because this operating system is not intended for our wooden computers.

• Firstly some “vital” PC components may not work. Will it be possible to run them or not. is unknown.
• Secondly, installation “Mac OS” on a PC or laptop, it is accompanied by an increased consumption of nerve cells, which can lead to equipment failure (you won’t install anything the first time).
• Third, install “Poppy” to a computer other than the original “Maca”is a punishable offense. But if this does not scare you, then please.

And installing Mac OS on a laptop is always fraught with risks. laptops are for the most part problematic devices for “Maca”. If on a PC you can somehow change the configuration to a compatible one, then this will not work with laptops. Full launch “Maca” on laptops only possible with the help of numerous “crutches”. And the more “crutches”, the more unstable the system will behave. So you still want to try installing “Poppy” on a laptop or pc? Then let’s continue.

What you need to install

First you need a computer with a compatible processor. Without this, nothing will come of it. Currently supported processors from “Intel” Core and Atom families. The processor must support Ivy Bridge and the SSE instruction set. If you do not have such a processor, then it is better to immediately abandon this venture. Now about the owners of processors from AMD. Theoretically, you can make “Poppy” run on these processors, but stability is not guaranteed. over, the probability of frequent crashes and reboots is very high, because AMD is not intended for “Maca”.

If your laptop has a suitable configuration, then you can start preparing the USB-drive for installing the operating system. It is recommended to have a flash drive with a capacity of 16 gigabytes or more (in most cases, the image of the installed system will be deployed to the flash drive, and “weighs” it’s about 10 gigabytes). And the last thing to stock up on. it’s free time and patience: installing Mac OS on a laptop from a USB flash drive (if this is your first time doing it) will take 4-6 hours and waste your nerves. The installation itself will be quick, but not everything works the first time. And setting up the system takes a lot of time. So let’s go.

Preparing a flash drive and distribution image

Since we will put the original “Poppy” with small crutches, you will first have to download the system image from the App Store. Currently the most sane version is Mac OS X Yosemite. We will install it. As practice shows, the best option for creating bootable media is to create it from under the installed “Mac OS”. But not everyone has it at hand. So, you need to put it on a virtual machine (at least) and already make bootable media under it. Let’s pretend that “Mac OS” installed on the car. What is the next step?

The next step is to download special programs (crutches) that will help to trick the system and make it believe that it is installed on an Apple computer. These programs are called UniBeast and MultiBeast. Next, format the USB flash drive in Mac OS X Extended (journal) format. Then we start UniBeast and everywhere we click the Continue and Agree button until we reach the choice of OS version. Here we select our distribution and enable support for laptops (Laptop Support). After that, click Continue and Install. The image will be recorded within half an hour. Now go to the next paragraph of the instructions “How to install Mac OS on a regular laptop”.

Before installation

There are a few useful things you should know before you start the installation. First of all, we will have to play a bit with BIOS (if you do not disable some of its options, then the installation will fail). So, go to BIOS and disable AHCI support completely. Then we turn off the discrete graphics card (for those who have Optimus), because it will not start, no matter how dancing. Well, we set the boot from the USB-drive to the first place. Everything seems to be with BIOS. Some may ask how to install Mac OS on an ASUS laptop if the card cannot be disabled in BIOS. Answer: just do not disconnect. She herself will not start.

It will also be useful to check the memory and disk for errors before installation. “Poppy”. very moody system. The slightest mistake can lead to sad consequences. Do you need it? If there are no errors, then you can start the installation process by first inserting the USB flash drive into the connector on the laptop. Yes, do not forget to turn off BIOS settings to standard before disabling AHCI and cards. Believe me, it will be better.

Installation

The Chameleon shell is loaded first. She suggests choosing a boot method: from a flash drive or from a hard drive. We choose the method of loading from a flash drive, but with the installation log displayed. So it will be easier to understand what kind of error occurred (if it occurs) than in graphical mode. After loading the necessary kexts the installer will load “Mac OS”. Now you need to format the partition. Choose “Disk utility”, the desired section and format it in “Mac OS X Magazine”. We click “Further” and the installation process begins.

If nothing crashes anywhere, then after creating the account you will be immediately thrown to the desktop of the installed system. If the installation stopped for some reason, it is important to find out what the reason is. In most cases, the installation is stopped due to the card. Then you need to restart the laptop and, when choosing to boot from a USB flash drive, register the GraphicsEnabler-Yes key. After that, everything should take its course. Many are interested in how to install Mac OS on an Acer laptop with hybrid graphics. Answer: exactly the same. By disabling the discrete adapter.

After installation

If the installation went without a hitch, then it’s time to start setting up the installed system. This is absolutely necessary. If this is not done, then after rebooting the system simply will not start due to the lack of the necessary keksts. For settings “Maca” you need to run the previously downloaded MultiBeast utility. It is she who will help us in the setup. How to install Mac OS on a Lenovo laptop and then configure it? Similar. Although with “Lenovo” There are some features that will be useful to learn. Some models are equipped with Wi-Fi transmitters that do not run under “Poppy” in general (BCM 4313). Here, only replacing the adapter will help.

If we don’t “Lenovo”, continue to configure. In MultiBeast you need to select the drivers that are necessary for our laptop. In addition, you need to select the DSDT list of the laptop from Apple, which is most suitable for the characteristics of ours. Then it remains only to click on the Build button, then Install. After the installation of the necessary keksts into the system is completed, you need to restart the computer for the changes to take effect.

What absolutely does not need to be done during use “Maca” on a laptop

What you don’t need to do is also the cleaning process. “Mac OS” from unnecessary garbage using special programs. Remember “Poppy”. not “Windows”. There is no registry in it! And there is nothing to litter there. And programs like CleanMyMac can seriously damage the system. Further, do not hope that powerful software packages like ProLogic will start up with you. As a rule, they have serious problems with running on “step-Macs”. You can just kill the operating system. Well, do not install programs from unknown sources. Viruses under “Poppies”Of course, not many, but they are very tough and can kill your system for one or two.

What to read to get acquainted with the principles of installation and configuration

There are also many resources on which it is chewed in detail how to install Mac OS on a laptop. It also describes ways to solve the most common mistakes. Finding these resources is easy. Some craftsmen can even customize DSDT and kexts for you. Of course, for a fee. But it’s best to figure out the installation and configuration process yourself. over, it is not so difficult.

What distributions should not be used

In no case do not try to use distributions that are already prepared for installation on a PC. As a rule, they are very crooked because they tried to make a universal system out of an individual system. But this does not happen. It’s best to learn how to install Mac OS on a laptop and create a distribution for your machine “from scratch”. Stability will be much higher.

What to do if it fails to install

If you have thoroughly studied all the information on how to install Mac OS on a laptop, studied all the errors and know how to fix it all, but it still fails to install, this means that your laptop is absolutely not suitable for “Maca”. Change back on “Windows”, from “Poppy” nothing will come of you.

Conclusion

This manual is not a reference. It describes an example algorithm for installing “Maca” on laptops. The specific actions depend on the model of your laptop and its configuration. So you still have to read additional information. Go ahead, future “poppy breeders”. and you will succeed. Do not forget to strictly adhere to the instructions. “How to install Mac OS on a laptop“.