How To Install iOS 12 On iPad 2019

How To Install iOS 12 On iPad 2019

This guide will tell you everything you need to know about installing new versions of iOS, updating them, downgrading and restoring data. Here is what it contains:

How to safely update iOS on your iPhone or iPad

Make sure your data is safe.

Before starting any iOS update, make sure your iPhone or iPad data is saved. You have two options: backup iTunes or iCloud.

Save your files in a safe place if you back up iTunes. Make a backup of iTunes and a copy of it, which you can save to Dropbox or another computer, like “Plan B”. If you don’t know where iTunes files are located on your computer, check out this article.

After creating a new iCloud backup, turn off iCloud automatic backup after backup This will stop any unnecessary backup made after your upgrade. This is an important step, as your initial iCloud backup may be overwritten with an incomplete or backup of your phone in a failed state.

To disable iCloud automatic backup, go to “Settings →“ iCloud and click “Backup You will find the switch button. Turn off and confirm.

Once you have backed up your data, you are ready to perform a secure iOS update. The procedure is simple.

You have two options to upgrade your iPhone or iPad to the latest version of iOS, with iCloud or using iTunes.

If you are using iCloud or wireless updates (OTA), here’s what you need to do. In the Settings menu, select General, then select Software update. You will see the Download and Install option. Click on it to start the iOS update procedure. If you have restrictions on the PIN code on your phone, you will be asked to enter it.

If you decide to use the iTunes method, you should install the latest version of iTunes. Then connect your iPhone or iPad to your computer and select your iOS device. In the “Summary” section, select “Check for update, then select” Download and update. Wait for the update procedure to complete. Do not disconnect your iPhone until the iOS update is complete.

Common causes of failed iOS updates. And fixes #128105;‍⚕️

An iOS update may fail for many reasons. These are the most common fixes that should be used to ensure that the following update is successful:

Network error. If you use the OTA method, this is the most common reason for the failed iOS update. You will receive a message stating that “an error occurred while loading iOS.” If you tried to restart the iPhone or disconnected and re-activated Wi-Fi, but cannot make it work, you still have a solution: reset the wireless connection. Go to Settings → General → Reset and select Reset Network Settings Check your Wi-Fi connection after reset.

You need more free space on your iPhone. The default message for this error is “Not enough space to download.” Sometimes the reason for an unsuccessful iOS update is the amount of free space on the phone. To resolve this issue, allow the application to be deleted or, in the worst case, back up iTunes or iCloud, and then delete some files. If you have backups, you can return your files at any time after the upgrade.

Read more:  Download iOS 10 On iPad

Not enough download space when updating iOS

Power failure or cable disconnect. This is an unpleasant problem that is more difficult to solve. You should check if the iPhone is still working or not. The best decision. Connect it to the computer, and then start iTunes recovery. After recovery is complete, you can try upgrading your iPhone to iOS again.

How to get your data if iOS update failed

Sometimes, instead of upgrading to iOS, you are stuck with a failed upgrade or with an old version and a damaged backup. Even if the update goes wrong, you can get the data back if you use iPhone Backup Extractor.

Depending on where your data was saved, we recommend that you read our iCloud data recovery guide or how to return data from iTunes backups

If you’re stuck, please write to chat. We will be happy to help.

How to install iOS beta

Important Things to Know Before Installing iOS Beta

We highly recommend make a backup using iTunes or iCloud before upgrading your iOS device. In fact, these backups should be done regularly in case you ever need to rely on them. It will cover you if:

  • Itunes does not want to recover this data
  • You do not need all your data from iCloud or iTunes. Only specific files or
  • You want to access all the data of your iOS device offline on your computer

How do you access your data if the above happens? It’s simple. Use iPhone Backup Extractor on Windows or MacOS and access iTunes or iCloud backups with just a few clicks. Our expert support is always happy to help and share your knowledge and experience, so if you have any problems or need help, just contact us.

Phone Backup Extractor recovers iOS data

To install the full iOS beta image on your iPhone, iPad or iPod, you should use the latest released version of iTunes. If it is not installed, you can download it from the Apple website. However, current versions of iOS can be upgraded to beta using “over the air” backup (OTA). Ota updates are faster and easier and do not require the use of iTunes or even a computer.

If you need more help, don’t forget that Apple will publish a document on the use of its beta versions.

How to install iOS 13 beta on your device (also works for iOS 12, 11, and 10 beta). Via beta developer

On your iOS device, go to developer.Apple.com in Safari.

Click Account and sign in using your Apple Developer Credentials.

Select the download section

Find the latest beta version of iOS and click to download

Your iPhone will ask you if you want to set up a configuration profile: select to do this

On your iPhone, go to “Settings →“ General → “Software Update and click“ Download and Install

Wait for the installation and reboot. And you’re done!

Through public beta

On your iOS device, go to beta.Apple.com/profile and tap the Download Profile section to register your device.

Your iPhone will ask you if you want to set up a configuration profile: select to do this

On your iPhone, go to “Settings →“ General → “Software Update and click“ Download and Install

Wait for the installation and reboot. And you’re done!

About Apple Beta for iOS

Two types of iOS beta versions are available: public beta and developer beta available through the Apple Developer Program

The difference between a public beta and a developer beta is that the latter allows developers to create or update third-party iOS apps. Therefore, this may include access to additional resources compared to those included in the public beta.

It is not recommended to run beta versions on the main iOS device, not least, as they can lead to data loss and regular crashes, and rollback can be difficult At least without losing your data. However, this is where we help. #128074;

Read more:  iPad Air 2 Turns On And Off

The developer’s beta begins a few weeks before the public beta and is updated earlier, and sometimes more often.

Both versions include the Feedback Assistant application, which collects information from participants registered in the beta program. The Apple Beta Agreement includes a confidentiality agreement, so if you are registered, you cannot talk about software other than what Apple publishes. Beta versions of Apple must be installed on a device that is not available to others, and this is not your primary device. Installing a beta update will not void the hardware warranty.

Every year, it’s getting easier to join beta versions. Have a nice meeting!

How to install the old beta version of iOS (iOS 9 or lower)

Prior to the changes in iOS 10, which made the beta installation process easier, there were a few extra steps to installing beta versions from older versions of iTunes. In particular, you need to register the UDID of your device.

Signing up for your UDID and accessing beta versions requires Apple Developer Program Membership. This is an annual membership fee of 99.

Two ways to find the UDID of your iPhone. How to find UDIDs using iTunes

Connect your iOS device and launch iTunes

Choose your device

On the Summary tab, click on the Serial Number shortcut to open the 40-character UDID string

Right-click and select Copy.

How to find UDID using Xcode

Connect your iOS device and launch Xcode on Mac

Go to the “Organizer” and select your device

Highlight and copy the string UDID

How to register iPhone UDID in the User Center

With the UDID on the clipboard, go to the Apple User Center, click on “Certificates, Identifiers Profiles, and select“ Devices

Click on the symbol to register

Give your iOS device a name and paste the unique device identifier copied from iTunes or Xcode.

Click Continue and confirm your entry to complete the registration process.

After that, return to the Member Center page and go through iOS beta SDK, iOS and iOS beta Select your device and start downloading.

As a result, you will get the downloaded dmg or zip file for unpacking. These files contain the IPSW file required for installation.

Opening DMG files on Windows

Beta versions of iOS 7 and earlier were distributed as DMG archives. Windows users cannot open them in their own way, but our DMG Extractor application can do it for you.

Opening the iOS 6 beta DMG file with DMG Extractor

How to install IPSW recovery file on your iPhone or iPad

Before continuing, turn off “Find my iPhone” in iCloud “Settings →“ iCloud → “Find my iPhone

Connect your iOS device to your computer

Launch iTunes and select your device in the upper right corner.

Ios device connected to iTunes

If your iOS device asks you to trust your computer, agree and enter the code on your device

Create an up-to-date iTunes backup to keep your data safe.

We would recommend iTunes locally, as it’s faster for both backup and restore

Back up your iOS device

On the Summary tab, while holding down ⇧ Shift (on Windows) or ⌥ Option (on Mac), click the Restore or Check for Updates buttons.

Select the IPSW Beta iOS Image and click the Open button to complete the installation

Itunes iOS device recovery

Itunes will tell you that will update your iOS device (even if you’ve selected an older firmware) and will check this update with Apple; click “Update”

Your device will reboot after installation is complete; network connection is required to complete activation

When the device restarts, the message “Slide for update” will appear: unlock, enter the password, activate if necessary and wait for the installation process to complete

This is it! Now you should have successfully updated your beta version of iOS.

Read more:  What Games On The iPad Support The Joystick

How to upgrade from iOS beta or gold master before the official release

If you are a developer and use the golden iOS master release from the beta program for developers, you will know that often the golden master code is identical to the official release in binary format. In this case, you do not need to update. Sometimes, however, this is not so, and there is no obvious way to get into the final version.

The answer requires classic backup, upgrade, and recovery. You will need to download the Gold Master version for iOS before completing the steps above to install the IPSW recovery file

How to downgrade iPhone or iPad from iOS beta

Restoring an older version of iOS may mean that you won’t be able to get the data collected when using the newer version of iOS on your device. You won’t be able to restore iOS beta or iCloud backup to an older version of iOS. Besides. If you are a cheeky jailbreak user. Your saved drops will be lost after switching to an earlier version.

Restoring iTunes or iCloud backup data to iPhone or iPad is possible for most file backups, but this is not trivial. Here is our guide on how you can get some of the most important backup data back to your iOS device.

Important: before upgrading from iOS beta

Very important , to back up your iOS device to either iCloud or iTunes, so if that. Something goes wrong, you can recover your data. We talked about this before, but cannot say enough: make sure you back up your device before proceeding with the next steps.

Downgrading iOS may result in data loss or inaccessibility. Apple does not recommend downgrading, so use caution.

A downgrade is only possible if Apple continues to sign the firmware on which you want to install an earlier version. Typically, Apple stops signing earlier versions of iOS about a week or two after the new release.

If you get the error message “This device is not suitable for the requested build”, it may mean that either Apple stopped signing iOS firmware, or you downloaded the wrong version.

Here is our step by step to do this:

Download the old firmware for your device, make sure that you download the appropriate version for your iPhone, iPad or iPod

Before continuing, turn off “Find my iPhone” in iCloud “Settings →“ iCloud → “Find my iPhone

Connect your iOS device to your computer

Launch iTunes and select your device in the upper right corner.

Ios device connected to iTunes

Create an up-to-date iTunes backup to keep your data safe.

We would recommend iTunes locally, as it’s faster for both backup and restore

Back up your iOS device

Put your device into DFU mode To do this, turn off the device, hold the power button for 3 seconds, while holding the Home button for 10 seconds. Release the power button and continue to hold the Home button until iTunes shows confirmation of the recovery mode. Click OK.

Entering DFU Mode: iTunes

Then click the Restore iPhone button and select Restore and Update to confirm.

Request to restore and update iTunes from DFU mode

Itunes will provide you with some information about the iOS update and will wait for you to click the “Next” and “Agree” buttons. Ios will be downloaded and installed on your device.

Itunes downloads firmware in recovery mode

Your device will reboot after installation is complete; network connection is required to complete activation

When the device restarts, the message “Slide for update” will appear: unlock, enter the password, activate if necessary and wait for the installation process to complete

This is it! You are successfully demoted.

If you need help restoring an iOS backup from a newer iOS device to an older version of iOS, we have a guide for this here

Having a problem? Do not be a stranger: reach out or leave a comment below!