How to install glass on your smartphone. How to properly stick 3d glass on the phone

Is it necessary to have a protective glass on your phone, what kinds exist and how to choose correctly?

Buying a new smartphone, almost everyone asks the question. whether you need protective glass on your phone, and if so, what better to choose? At first you should determine what degree of protection you need, and in what conditions the gadget is used. Not so long ago, the most popular and widespread way to protect the touch screen display were special films. They protect resistive displays from scratches, quick rubbing and breakage if dropped. The disadvantages of this option include the fact that the film is partly worsens the review, does not have 100% transparency, poorly resists scratches, and can prevent the free sliding of the finger on the screen.

Thanks to the development of new technologies, there are on the market quite thin, durable transparent, and multilayer materials that combine aesthetic and protective properties. They are produced on the basis of silicate glass and various polymers. Today they became a worthy alternative to protective films. On assurances of manufacturers they can provide a high level of protection from scratches, scuffs and bumps, even in case of falls.

Prepare a place for gluing glass

To ensure that no dust appears between the protection and the smartphone, you should take care in advance about the room where you are going to glue the glass. It is best to do it in the bathroom, turning on the crane for a few minutes (or preferably shower) with hot water. the steam will settle the dust floating in the air and it will not interfere in the work.

Need scissors and scotch tape, glass cleaner, soft cloth and a squeegee (or plastic card). But usually the set of protective glass includes everything you need for its gluing. alcohol wipes, cloth, stickers and the glass itself.

Tips for better results

First, make sure that the place you have chosen for sticking the glass is sufficiently lit and the air in the room does not contain a lot of dust that can settle on the screen and prevent the glass from fully adhering to it. By experience, in domestic conditions, the bathroom is best suited for these purposes, as the high humidity is just minimizes the presence of dust.

Wash your hands thoroughly to remove any grease and dirt that may stain the screen and the adhesive layer of the protective glass.

Let’s move directly to the process of gluing. Usually a set of two wipes is supplied with the protective glass. The first cloth is impregnated with a special alcohol-containing solution. Use it to remove all grease stains, prints, dust, and other contaminants from the screen surface. The second cloth is dry, it is necessary to get rid of wet streaks after you wiped the screen with a wet wipe. If the kit does not have a tissue, you can use improvised materials: alcohol and pieces of microfiber or other soft cloth.

A set of special fixing stickers and an adhesive tape are usually included with the glass installation kit. If after cleaning the screen with a cloths some amount of dust or lint is left on the screen, you need to remove them from the surface with an adhesive film. Fixing stickers make the process much easier, allowing you to put the glass on the screen more accurately and neatly. Again, in the absence of any of the above, you can use a simple transparent adhesive tape. Fix the stickers to the upper surface of the glass, remove the film from the sticky layer and, holding the stickers, carefully lower the glass down to the screen with all buttons, holes and indicators on the screen in place. Be careful: to move the protective glass after its sticking is not possible. only remove and reinstall, during which it is very easy to damage the glass itself or ruin the adhesive layer. That is why we advise you to stick it the first time, with some practice in placing the glass on the screen before you remove the film from the sticky layer.

Once you have glued the glass, make sure there are no bubbles or dust between the surfaces of the screen and the glass. Air bubbles can be removed by smoothly squeezing them out over the nearest edge of the screen. A piece of flat plastic, such as a bank card or driver’s license, can help. In order to remove a particle of dust or lint, you need to carefully peel off the edge of the glass, remove it with adhesive tape or tape and put the glass back down on the screen.

Often problems arise when installing a protective glass of poor quality. Therefore, we advise you to choose this accessory responsibly, do not save money and buy protective glass only from proven manufacturers, so it will last you a long time and there will be no problems during the sticking and operation.

We hope that our article was useful to you and now you will be able to glue your own protective glass on the screen of your smartphone. If you have any questions or you want to use the service install a protective glass from our experts and get a guaranteed quality result, we will be happy to help you.

The mistake of attaching the safety glass

The main enemy of users. haste. So if you do not have time, it is better to postpone the installation. No less important are accuracy and precision.

Another common problem is insufficient cleaning of the screen, accessory and surfaces around. The remaining during the process of gluing dust and streaks significantly distort the image and spoil the appearance of the gadget. Remember that the inner layer of glass (adhesive backing) should not be wiped on the contrary. And the protective film on this side of the tempered glass is removed at the last moment.

Incorrect centering, especially in curved glasses, is usually the result of haste and inattention, but can be easily avoided if you take your time.

In addition, note an important point that applies not so much to gluing, but to the choice of glass. a mismatch between the accessory and the screen of the gadget itself.

Repositioning the safety glass

It was not possible to install protection from the first time? If you have purchased a quality accessory, the experience you have gained will come in handy when you glue the protective glass again.

If you have glued the glass on the phone badly, take a plastic card and very carefully move it under the weakest fixed corner (or the one that seemed to you as such). Slowly, so as not to break the glass, lift the glass protector until it comes off completely. Correct your mistakes and try again. the adhesive base of quality products will withstand these manipulations. However, if you fail and the second time, it is better to turn to a professional and most likely you will be advised to buy another accessory. Otherwise the fit will not be very good.

And yet we are confident that by following our tips you will easily cope with the installation of protection on your gadget on your own and from the first time.

What kinds of protective glass are there?

The technology of protective accessories do not stand still and develop along with smartphones. Now on the market there are glasses with high-quality oleophobic coating, rounded edges, as well as frames, repeating the design of gadgets. Conventionally, all types of protection can be divided into three categories:

• 2D. normal glass with straight edges, which do not reach the border of the screen about 1 millimeter;
• 2,5D. these variants have small smooth chamfers around the perimeter, which are combined with roundings of the body;
• 3D. special glasses with curved edges for smartphones with the screen coming to the sides.

How to glue a protective glass on the phone

Before proceeding to paste protective glass on the phone display must “dust-free” workplace or find a room with minimal dust. The most suitable are more humid rooms. a bathroom or a kitchen. Additionally, you can remove dust particles from the air by splashing water with a diffuser. You should also wash your hands and wear clothing made of materials that do not absorb dust. If your phone’s screen was previously covered by a protective glass, you must remove it.

How to remove the protective glass from your phone

Because glass is much stronger than a screen protector, it is also harder to remove. Note that the glass is tightly bonded to the touchscreen, but it is held in place not by the glue, but by the electrostatic properties of the material. Do not use sharp metal objects to remove the protective coating, as you can damage the screen itself. It is necessary to use the silicone suction cup with care too, as the protective glass usually keeps better, than the screen itself, and it is possible to damage trailers.

• the improper installation or the presence of dust under it;
• If the old glass is worn or visibly damaged;
• the previously installed glass is completely broken.

In the first case, the protective accessory can be removed using the tab that is on top of the glass. Old, undamaged glass can be removed by picking up its edge with a special tool, plastic card or plectrum (used for playing string instruments, including the guitar) and running them under the entire surface of the removed glass, peeling it off the smartphone screen. Will facilitate the removal of the protective glass from the screen silicone suction cup, which pull away the accessory from the screen, while picking it up from the bottom with a plastic card or other non-metallic object. If the glass is broken, it is necessary to carefully remove its separate fragments separately, first removing the largest part with an entire corner.

The next step of sticking protective glass on the iPhone or other smartphone model is to prepare tools, materials and devices. For this you will need:

• Liquid which will be used to clean the screen (antistatic, a special compound for cleaning displays or alcohol);
• a soft microfiber cloth (often included);
• Clerical or packing adhesive tape;
• a special scraper or plastic “credit card
• Knife and scissors.

After that you can proceed to degrease the surface of the display and remove dust particles. To do this use one of the types of liquids described above. Cover the screen with it and wait until it dries completely. You can also use wet wipes, available in stores. After that, the display is wiped dry with a microfiber cloth. This operation will be useful even if you have just removed the factory film to remove the remains of adhesive. Before you glue the protective glass on the screen of your smartphone, the device must be turned off.

After that, the lower technological film is peeled off from the protective glass, and it is positioned over the display without touching the surface. Aligning the protective glass with the screen elements, we lower the protection to the display. In this case it is necessary to hold the glass only along the edges, so that its surface does not get your fingerprints.

The accessory glues itself without any additional effort and without waiting for it to dry. If there are air bubbles under the glass, you can “expel” them with a cloth, pushing them on the surface and moving the air to the nearest edge. If there are dust particles under the protective glass you will need to remove the accessory from the screen again. The easiest way to remove dust particles is to use an adhesive layer of scotch tape.

If you are visually satisfied with the result of gluing, check the operation of the touch panel. Now the screen of your smartphone or tablet is protected from damage.

Now let’s combine the above information into a few general rules, which will be useful for everyone who decided to install a protective glass on the phone by themselves:

What exactly is the difference between glass and film

In the manufacturing process, the glass is hardened, making it strong, sturdy and armored. The thing more effectively protects the display from chips and cracks than a polymer film.

One of the factors for which you should buy this device is its innovative structure:

• Flexible. softens direct impact;
• Solid. is not afraid of contact with sharp objects (you can easily scratch the surface with keys, knife, nail. nothing will happen to the monitor anyway).

In case of fall the product is covered by “cobwebs” without sharp corners. Thus, the touchscreen remains intact and unscathed, and the glass comes time to replace. Believe me. it’s cheaper than fixing the device in a service center.

In addition, it is worth noting that the hardened protector consists of 5 layers:

• elastic silicone backing
• restraining layer
• glare layer
• protective layer
• Oleophobic coating (repels grease, oil, water and masks fingerprints)

The phenomenal structure makes the product inconspicuous visually and does not allow it to degrade the quality of the picture. By the way, nothing affects the response speed of the touch sensors either.

How to glue yourself a miracle creation, so you do not have to go to a craftsman?

How much does it cost?

On AliExpress there are many options, but I will point out the one that I tested.

A cheeseburger at McDonald’s costs the same money and hurts more.

The package arrived in 12 days at the post office. Free delivery.

In general, I am satisfied, I will definitely have such a thing in reserve and use it when sticking the glass. Makes the whole process easier and allows you to ignore errors. Tuck in the sauce and you’re done.

Bookmark