How To Insert A Xiaomi 8 SIM Card

Iphone 8 and iPhone X SIM card, how to insert and cut

So, you’ve just bought a new iPhone, what’s the first thing you do? Well, of course, insert your SIM card. It’s a SIMple task, but if you take a SIM card from an old phone, you cannot use the new nano SIM card format or the SIM tray where you have to insert this SIM card. How to insert a SIM card into an iPhone X?

First, you need to make sure you have the correct SIM card.

Since you need the smallest nanometer-sized SIM, you can go to your carrier to have your SIM cut or replaced with a new one, or you can do it yourself by following our easy step-by-step guide.
Once you have a SIM card of the right size, you will need a tool to remove the SIM cards (a paperclip or security pin will work too).

With all of these tools, you’re ready to get started. Follow these steps to change or insert a new SIM card in iPhone X, iPhone 8, and iPhone 8 Plus (The same applies to the SIM card in iPhone 7, iPhone 7 Plus, iPhone 6s, iPhone 6s Plus, iPhone 6 and 6 Plus. Iphone SE and earlier iPhone).

Iphone 8 and iPhone X SIM card, how to remove

SIM insertion and removal instructions can help with problems, activation errors, internet connection issues, and blank frozen screen.

Do not try to remove the SIM card while the device is on. This could damage the SIM card or device.

Make sure the device is turned off.

Pull out the SIM card tray from the right edge of the device. Use the SIM eject tool (or paperclip) to unlock the tray by inserting it into the provided slot.

Remove the SIM card from the SIM card tray. If applicable, see SIM card insertion.

What color to choose:

Iphone 8 and iPhone X SIM card how to insert

SIM insertion or removal instructions can help with activation problems / errors, browser connection issues, and blank frozen screen.

  • Do not try to insert a SIM card while turning on the device. This could damage the SIM card or device.
  • Do not change or alter the SIM card.

Make sure the device is turned off.

Pull out the SIM card tray from the right edge of the device. Use the SIM eject tool (or paperclip) to unlock the tray by inserting it into the provided slot.

Insert the SIM card into the SIM card tray. Insert the SIM with the Verizon logo and SIM number on top (gold contacts facing down).

Insert the SIM card tray. Press down on the tray to lock it in place.

Iphone 8 and iPhone X SIM Card How to Crop

As smartphones get thinner and more compact, every excessive fraction of an inch is cut to make room for tight-fitting components.

One such device is the SIM: Companies with Apple at the forefront pushed SIM miniaturization, and we quickly switched from a regular SIM (technically known as a “mini-SIM”) to a microSIM. And in recent years. To the nanoSIM card standard.

How To Insert A Xiaomi 8 SIM Card

Iphone X SIM

Don’t worry if you only need to cut out a small portion of the colored part. Just don’t go too far. The result may not look as pretty as you could with a dedicated SIM cutter, but if you really need to do it quickly, you can do it yourself.

How to insert a memory card

Anyone who has repeatedly inserted SIM cards into his Xiaomi knows that not only they are inserted there. The card in Xiaomi Redmi 4, as always, can be placed in another. Micro SD, which serves as an internal storage. It can store pictures, photos, music, videos, install applications and much more. You can do without a flash drive, but the built-in memory is not always enough, so users have to choose. Either two mobile numbers or additional space for files.

To install a memory card, you need to perform almost the same actions as in the previous paragraph. Insert a paper clip into the hole on the SIM tray, press until it clicks, pull out the tray and insert the SIM card into the first slot, and the SD memory card in the second.

How to insert a SIM card and a USB flash drive into Xiaomi Redmi 4

The now popular Chinese company Xiaomi has released several lines of phones, including such popular models as Xiaomi Redmi 4A, Xiaomi Redmi 3s, Xiaomi Redmi 4 Pro, and many others.

What these models have in common is that the SIM card can be inserted in exactly the same way. How to insert a SIM card in Xiaomi Redmi 4 (and in many other models, for example, in Xiaomi Redmi 4A). This is our article today.

To perform this operation, you will need the Xiaomi smartphone itself, plus a paper clip for opening the tray, which already comes with the kit in the box with the phone. The tray itself is located on the left side of the device, and you can also insert a microSD flash drive there instead of the second SIM card.

Sequencing

  • Insert a paper clip into the small hole in the tray;
  • Press until it clicks, take out the inserted paper clip;
  • We take out the tray from the phone.

Here you will see two places at once. For nano and micro SIM cards (in Redmi 3), and a hybrid tray in Redmi 3 Pro, 3X and 3S (instead of a second SIM card, you can insert a memory card there).

You need to install cards in the necessary connectors, then carefully insert the tray back into the smartphone. If done correctly, you will hear a click and feel that the tray is level with the phone body.

Simultaneous placement of two cards and an SD drive

Yes, yes, there is such a method, but we consider it our duty to warn you: any actions are performed at your own peril and risk, they can harm your smartphone. If you want your Xiaomi smartphone to SIMultaneously serve both phone numbers and a large number of personal files and programs, follow the instructions below.

To do this, you need to warm up the SIM card under the lighter for 15-20 seconds, and then carefully remove the electronic chip from the plastic shell and insert it, as well as the SD memory card into a special slot in the tray. But do this in such a way that the golden contacts do not overlap with each other, but can be recognized and separated by the smartphone as separate. After that, insert the tray into Xiaomi Redmi 4 Pro, as usual, and check the functionality of this method by turning on the gadget. With a high degree of probability, the phone will see both SIM cards and the memory card at the same time, however, we do not guarantee that the device will not malfunction.

In any case, we advise you to be careful and not once again risk the integrity and safety of your gadget. It is better to choose one of two real options than later regret your ingenuity over a broken phone.

SIM Cards Supported by Xiaomi

Most of the company’s devices support two SIM cards at the same time. Therefore, it will be possible to integrate both Nano-SIM and Micro-SIM into the device.

The device also has the ability to insert a Nano-SIM memory card, but then you can only use a memory card and Micro-SIM.

Modders on the net have come up with a method to use 2 SIM cards and a memory card. The reception is called “Sandwich”. It is not often possible to cut the Nano-SIM properly, it does not always fit.

Installing a memory card

It is not always possible to implement a SD card. Many devices do not use this opportunity, they already have a large amount of internal memory.

The flash drive is embedded either in an additional slot or in a mixed connector. In the latter case, the tray has two indentations of an unusual shape, while the user must choose whether to install one SIM and a memory card in the device, or just two SIMs. The second must be cut to Nano.

The SD card is installed in the same way as the SIM card. A mixed slot is marked with a standard icon; it cannot be confused. Contacts should be directed upwards. To remove the memory module, remove the tray using the above method and pick up the USB flash drive with a paper clip or fingernail.

Installing a second SIM or memory card

Next, you need to figure out how to insert a memory card into the device. It is not difficult to do this, the only difference is that in conjunction with the SIM-coy you should implement the drive and the tray.

Microsd has special cutouts that prevent it from being integrated incorrectly. It is necessary to look to ensure that they are completely combined. What it looks like is shown in the image below:

After that, just like with a single card, you should install the slot in the device. It is necessary to ensure that the content does not change position and completely falls into the desired guides.

How to insert a SIM card into Xiaomi. Step by step instructions

How to insert a SIM card into Xiaomi. This question is asked by many users who have become the owners of a new Xiaomi smartphone. Maybe it’s Redmi 4 or Redmi 5, or even Mi A1 or Mi 6. Of course, it can be any other option from the huge list of devices from this manufacturer from the Middle Kingdom. It remains only to congratulate! Great choice! Now you just need to turn on the device and insert a SIM card into it. For most users, this operation will seem extremely easy. But there are also those for whom the process of implementing SIM-ki will become a real problem.

Therefore, you need to consider this process in stages. After reading the manual, even a beginner will be able to easily integrate a SIM into a personal Xiaomi device.

Reinserting the SIM card tray

After that, the SIM card is installed with the tray again into the device case. Installing the card must be done carefully, as this fragile little thing is very easy to break.

The tray must click. Then you need to turn on the device and wait until the inserted SIM finds the operator and becomes active. The name of the mobile provider will be displayed in the top tray.

The device is ready for work and household functions.

That is, one for placing SIM1, the second for SIM2 or a flash drive. But there are models with a mixed slot that can accommodate 1 or 2 SIM at once, as well as a memory card (for example, Redmi 4a, Mi 5, Redmi 5, 5 Plus and others).

Using a paper clip to remove

You should take the package in which the device was shipped and take from it a special key (called a “Paperclip”). It can be found quickly as it is secured in a separate paper case.

A paper clip is supplied with every Xiaomi device, since they have a non-removable back panel. Thanks to this key, you will be able to access the SIM card slot.

If the wrench cannot be used for any reason, then a solid wire of suitable diameter can be used instead. Do not stick sharp needles in order not to damage the removal mechanism.

How to remove the SIM card tray

To embed a SIM, you first need to remove the tray. It is located on the left side of the device, and is removed using the paper clip supplied in the box.

  • Find the packaging and look into it;
  • After that, remove from there the iron paper clip shown in the image below. Thanks to her, it will be possible to open the smartphone;

Note! Be sure to turn off your device before proceeding to the next step.

  • Place the unit on something soft to avoid scratching the display. It is necessary to ensure that the device does not fall. Find the hole shown in the picture below. It is necessary to remove the tray;
  • Slowly push on the paper clip without applying excessive force, while the tray should slide out;
  • Pull the paperclip out and put it back. You no longer need it. Gently grasp the tray on both sides and remove it from the device.

Simultaneous placement of two cards and a CD-drive

If the developer did not provide for such an opportunity, then you can get out of the situation manually.

  • Remove the chip from the SIM card. To do this, you need to gently heat the plastic on the sides until it becomes pliable, then pry it with tweezers and get the gold microcircuit. You can use a lighter or hair dryer;
  • Carefully grind the chip from the bottom and along the edges with sandpaper, remove about 1-2 millimeters of plastic;
  • Use super glue to attach the chip to the SD drive. You need to look for information specifically on your SIM card additionally. The correct location of the chip differs for different communication providers.

Installing a SIM card in a new device is no more difficult than in the previous one. Xiaomi devices are SIMilar to each other and open using the same method. If a paper clip has been lost or was not supplied, you can use a standard paper clip by first unfolding one side of it.

Done! As you can see, everything is very SIMple, especially since this procedure does not need to be performed daily. You will have to change the SIM-ku or memory card only when switching to another operator or adding memory.

How to insert a SIM card into Xiaomi Redmi Note 8. How to put a SIM card into Xiaomi Redmi Note 8 and Redmi Note 8 Pro phones

The mobile phone has become a very important device in people’s daily life due to the large number of opportunities that it gives us with the advent of the Internet and social networks. Since then, its capabilities have grown to the point that today we use our mobile phone for almost everything. Reading information on the Internet, browsing social networks, sending or receiving mail messages or using navigators and travel guides are some of the most repetitive activities among users. Well, here, in fact, you know everything yourself ๐Ÿ™‚

If there is an element of fundamental importance in mobile devices, then it is undoubtedly a SIM card, since it is important not only to make phone calls or send and receive text messages. This is also because the SIM card allows you to store contacts by creating a phone book or phone book.

For this reason, one of the first things we do when a mobile phone gets into our hands is to insert a SIM card into it. And this is what we must do right in order for the device to work properly.

For this reason, we wrote this article, and in it we will tell you how to correctly insert a SIM card into Xiaomi Redmi Note 8 and Redmi Note 8 Pro.

The specifications of these devices can be found here, and if you wish, you can also purchase Xiaomi phones and other useful gadgets. So, let’s begin:

If it’s fast, everything is SIMple, the SIM card is inserted SIMilarly to Apple devices. Into a slot on the side that you need to get. Dallee. In detail.

To do this, you will need to follow the steps that you will see below, they are quite SIMple:

In this case, it is very important to have on hand all the necessary components for inserting a SIM card:

Key used to open terminal ports (or just a paperclip)

Nano SIM card. It is important to make sure that your SIM card is NANO in size, as this is the one that is really compatible with Xiaomi Redmi Note 8 and Redmi Note 8 Pro phones.

It is necessary to completely turn off the device so as not to damage the phone when replacing the SIM card. Although I do it like this, no shutdown ๐Ÿ™‚

There is a hole on the left side of your phone where you need to insert a special key, after which the rear slot will open automatically. It is sometimes difficult to find, which is why people often search the network for how to insert a SIM card into Xiaomi Redmi Note 8. Knowing this subtlety immediately decides everything.

Then, when you open the slot, the SIM card tray is in your hands. Just insert the SIM card correctly into it. There should be no difficulties here.

When you put the SIM card in, the tray needs to be inserted back into the slot, it is important to note that you must be sure that the NANO SIM card has been inserted correctly. That is, do not move or tilt the tray as this could result in loss of contact between the card and the device. Or she will just stand up crookedly (yes! It happened, you don’t need to have strength :))

Now all you have to do is turn on the phone, because with the correct installation of the card, you can make phone calls, as well as receive and send data. This is me about the Internet ๐Ÿ™‚ In general, there is only one Finn here. This is that the SIM card is inserted from the side, like on an iPhone. And it’s enough just to know about it. The rest is pretty SIMple. Good luck!

Installing a SIM card on a Huawei Honor 30 smartphone

Prepare the device for use following the instructions in the figures below.

Use the included SIM eject tool. Make sure that the SIM card is correctly installed in the slot, its beveled corner is in the correct position.

Setting up your preferred SIM or USIM card

When two cards are activated, you can assign voice calls, messaging and data services to specific cards.

Launch the Settings app, tap Connections โ†’ SIM card manager, and then set your preferred card options in the Priority SIM menu.

Installing a SIM card in a smartphone Xiaomi Redmi Note 9

Insert the special device that comes with your Xiaomi Redmi Note 9 phone into the hole located near the SIM card tray. Remove the tray.

Insert SIM cards and Micro SD card as shown in the picture.

Installing a SIM card in a Samsung Galaxy A50 smartphone

You can install two SIM or USIM cards to use two phone numbers or service providers on one device. In some places, the data transfer rate may be slower if two SIM cards are installed in the device instead of one.

Use only nano-SIM card.

Don’t lose or let others use your SIM or USIM card. Samsung is not responsible for damage or inconvenience caused by loss or theft of the card.

Insert the ejection pin into the hole in the slot to slide it out. Make sure the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged.
2. Carefully pull the slot out of the corresponding connector.
3. Place the SIM or USIM card in the tray with the golden contacts facing down.
4. Gently press on the SIM or USIM card to lock it into the slot. If the SIM card is not seated properly, it may fall out of the slot.
5. Insert the slot back into the corresponding slot.
If a wet slot is inserted into the device, it may damage the device. Make sure the slot is dry.
Insert the slot fully into the connector to avoid liquid entering the device.

SIM or USIM card activation

Launch the Settings app and tap Connections โ†’ SIM card manager. Select a SIM or USIM card and tap the switch to activate it.

Installing a SIM or USIM card

Insert a SIM or USIM card obtained from your mobile service provider.

You can install two SIM or USIM cards to use two phone numbers or service providers on one device. In some places, the data transfer speed may be slower if two SIM cards are installed in the device instead of one.

โœ“ Use only nano-SIM card.
โœ“ Don’t lose or let others use your SIM or USIM card.

1 Insert the ejection pin into the slot of the Samsung Galaxy A51 smartphone to slide it out.
Make sure the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged.

2 Carefully pull the slot out of the corresponding connector.

3 Place the SIM or USIM card in the tray with the gold-colored contacts facing down.

4 Gently push the SIM or USIM card to lock it into the slot.
If the SIM card is not seated properly, it may fall out of the slot.

5 Insert the slot back into the corresponding slot.
โœ“ If a wet slot is inserted into the device, it may damage the device. Make sure the slot is dry.
โœ“ Fully insert the slot into the connector to avoid liquid entering the device.

How to insert a SIM card into a smartphone

Choose a section

Using two SIM and USIM cards

Installing two SIM or USIM cards allows you to use two phone numbers or service provider with one device.

How to choose the size of the SIM card

If you have been using the same SIM card for a long time, it probably has standard dimensions of 25 x 15 x 0.76 mm. However, modern phone models, including iPhones, have switched to smaller format SIM cards:

  • Micro. 15 x 12 x 0.76 mm;
  • Nano. 12.30 x 8.80 x 0.67 mm.

Older iPhone 3G and 3Gs use a standard format SIM card. However, models 4 and 4S require a micro-SIM, and the iPhone 5 and beyond are already designed for a nano-SIM card, practically consisting of only one chip. You can set the size of the SIM card without looking at the model, according to the size of the slot for it.

To get a card of the required format, you should contact the communication salon of your mobile operator: there you will be given a new SIM card with the ability to break off its edges to the desired format (micro- or nano-). Your mobile number will remain the same. This service is usually provided free of charge. The old SIM card is blocked.

Some craftsmen cut their existing SIM-card to the desired size on their own using stencils (they can be found on the Internet). However, this does not always go smoothly: there is a risk of damaging the chip or cutting the edges of the card unevenly. After inept manipulation, the card can get stuck in the tray and prevent it from opening. Therefore, we do not recommend that you conduct such experiments at home.

How to find and open a SIM card slot in iPhone

Finding and removing the SIM tray is often difficult. We are used to the fact that in old mobile phones, the SIM card is inserted into the slot located directly under the battery. However, modern phones have a different design. The tray for the SIM card is almost invisible in them. And to open it, you don’t have to remove the back cover and take out the battery.

In the latest generation iPhones, the SIM card slot is located on the right side surface of the case (approximately in the middle). On older models, it may appear on the top edge of the case, next to the “Enable” button. Looking closely, you will see a tray cover with a small hole.

The hole is like a keyhole: the tray can only be removed when in use. Usually, when you buy an iPhone in a box, you also find a thin metal wire key. If you insert it into the hole of the plug, it will slide out, after which you can easily pull out the slot itself.

If the key is lost or for some reason your iPhone was not equipped with it, you can take a small paper clip and, by unbending it on one side, use it instead of the key. She will successfully replace him.

How to insert a SIM card into an iPhone

The question of how to insert a SIM card into an iPhone may seem irrelevant: if you buy a SIM card, the employees of the communication salon usually offer services to activate it and insert it themselves. But if you nevertheless decide to do it yourself or while using your iPhone, replace one SIM card with another (or insert an additional one), you may encounter problems:

  • Search and open the tray for the SIM card;
  • Fitting the SIM card to the required format.

Inserting a SIM card into the tray itself is SIMple, but for a beginner user, and this can cause certain difficulties.

How to insert a SIM card into an iPhone

Once you understand the location of the slot and the format of the SIM card, you can easily insert or remove it. The aLGorithm of actions is SIMple.

  • Disconnect iPhone if it was turned on.
  • Insert the key into the hole of the SIM card slot.
  • Push the key down. This action does not require any force: a little effort is sufficient.
  • The slot will pop out slightly. Pick it up with your fingers and gently pull it out of the iPhone.
  • Remove the old SIM card from the tray (if it was there).
  • Insert the SIM card into the slot. The notches in it will tell you how to do it right. If in doubt, check yourself: the SIM card contacts in relation to the surface of the slot should “look” down.
  • Reinsert the tray gently and push it back.
  • Turn on your iPhone. If you inserted a new SIM card, now is the time to start activating it and setting up the device.

If the iPhone is working properly, you can easily do these manipulations and insert the SIM card into it yourself. If something does not work out (most often the tray does not come out), contact the service center. And to begin with, under the pretext of replacing the SIM-card, you can come to the cellular salon. Operators will help you insert a SIM card and report a mechanical failure of the tray, if any.

What difficulties may arise

We decided how to insert a SIM card into Xiaomi, while users often have certain difficulties:

  • SIM card is not detected. Check if the card was inserted the correct way into the tray;
  • The special key to open the tray has been lost. You can replace it with a regular paper clip, just unfold it and use it instead of a key;
  • The tray does not fit back into the smartphone. Make sure the cards are light enough in the holes, do not try to insert a SIM card of the wrong size.

If all the manipulations were performed correctly, but the smartphone still does not see the card, contact your cellular operator to establish the reason for the lack of a network.

Do not try to open the SIM card tray with a pin or any other sharp object, otherwise it is likely to damage the part.

How to insert a SIM card into Xiaomi

How to insert a SIM card into Xiaomi. This question is asked by users who have just bought a smartphone from a Chinese manufacturer. If in old phones it was necessary to open the back cover, and sometimes remove the battery in order to place the SIM card in a special tray, then in new smartphones there is a separate tray for the SIM card.

For some users, the process of replacing a SIM card on a smartphone is difficult, so it is worth considering the procedure in stages to minimize the likelihood of damage to the SIM card and the phone itself.

How to insert a SIM card into Xiaomi: step by step instructions

Most modern smartphones from Xiaomi (especially budget-level models) have a hybrid tray that allows you to install either two SIM cards at the same time, or a SIM card and a memory card.

  • The box, along with the smartphone, comes with a special device for opening the SIM card tray. Basically, the SIM card tray is located on the side edges of the gadget, you can find it by a small depression.
  • We take any soft cloth, lay it out on the table or any other horizontal surface, lay the smartphone screen down on it. In this position, it will be easier to get to the SIM card slot.
  • We insert the key into a special hole and press lightly until it clicks. If all manipulations were performed correctly, the paper clip itself will bounce off the hole.
  • Finally, we take out the tray from the smartphone with our fingers.
  • We install one or two SIM cards. Most trays can hold one nano and one micro card. The correct position of the SIM is up with a gold-plated chip.
  • Insert the tray back into the phone and snap it shut.

Replacing the SIM card in modern devices can be done without turning off the gadget itself, the card will be detected automatically.

SIM cards supported by Xiaomi

Most smartphones from Xiaomi support two types of cards. Nano and micro. The hybrid slot also allows you to combine a nano-SIM card with a memory card in case you do not have enough main memory for storing personal files.

On the net you can find several ways to use two SIM cards and a memory card in a hybrid slot. Simka is cut in a special way and glued to the card.

How to use a memory card and two SIM cards at the same time

Some new smartphones have a tray that allows you to use two SIM cards and a memory card at the same time. If your device has a slot for only two SIM cards or a SIM card and a flash drive, then you can use the following trick:

  • Take the operator’s SIM card. Using a lighter, melt the plastic part of the SIM card to get the chip. Once the plastic has become more pliable, remove the chip with tweezers.
  • Remove the plastic from the back of the chip using sandpaper (no more than 1-2 millimeters).
  • Stick the resulting microcircuit on the back of the memory card (from the side of the gold contacts) on the free area. If you get raised edges, trim them slightly with sandpaper.

If all the manipulations were performed correctly, after installing such a sandwich, the smartphone will immediately recognize both the memory card and two SIM cards.

Please note that all manipulations with the memory card and SIM card you carry out at your own peril and risk, the information in the article is provided for information only.

How to open SIM card slot in Samsung / Lenovo / xiaomi redmi 3 / Meizu 2m / ASUS / Huawei and others

In order to open the “” of the SIM card, you need to find it. It’s not difficult. Examine the case carefully and you will find a small hole (like a needle).

Of course, I only write about the trays that drive out, because they are still ordinary ones, most often under the battery.

When you find, insert a key or straightened paperclip into the hole next to the .

A key is a small metal tool that you sometimes get with a new phone, but you can open the SIM card slot without a key.

How to properly open the SIM card tray without a key

If you are a lady or have a girlfriend, almost any earring can open the tray.

Earrings are the SIMplest and most common tool for this kind of business, and even if they are not at hand right now, but you can quickly find (borrow).

How to open the SIM card tray with a paper clip

A paper clip is the next most common thing if you happen to work in an office.

Just beware of a plastic-coated paper clip, any small paper clip will open the tray. Just straighten one end and press firmly.

When finished, don’t throw it away, but you can use it in your work to staple different pieces of paper together.

How to open the SIM card slot in your phone

Developers of phones, or rather smartphones, never cease to amaze with senseless innovations.

However, you have the right to disagree with my opinion, but, for example, I absolutely did not like, for example, a hybrid slot.

This code can be inserted into it either a SIM card or a micro SD flash drive. Maybe earlier, when there were no two slots at all, such a decision would have been accepted by everyone with a bang.

Only today, no one likes to constantly change cards, but many have to, especially those who call foreign countries.

The second “misunderstanding” is a slot for a key. Not only is it difficult to find, it also requires a key or something like it.

I donโ€™t know why they didnโ€™t like the traditional slot on an ordinary latch. I pressed it once, the slot opened, pressed it a second time, the slot was tightly closed.

If you can install only one SIM card in your smartphone, then there is a good way to install two. Read more here.

Simple and convenient, but if this happened, then I’ll show you how to open a slot for Samsung, xiaomi redmi 3, iPhone, Meizu, ASUS, Huawei, Lenovo and so on.

How to properly open the SIM card slot with a key

For those in the know, this may be obvious, but there are many people out there who might miss this micro-holes as they are not well integrated into the design.

Find a small hole on the body of the device.

Find the SIM card insertion tool inside your phone box. If lost, you can use something like a paper clip.

Insert the tool into the hole, press firmly and the slot should pop out.

Remove the SIM card from the tray or carefully place the SIM card or USB flash drive into it.

Insert the tray back into the phone and press it to close.

NOTE: you can use a paper clip, but beware and never use a sharp object like a pin. This will damage the tray. Also, do not use wooden sticks. They can get stuck in the hole.

How to properly open the SIM card slot with a needle

If you have repaired socks or trousers, you will definitely have a needle in the house.

Just use the non-pointed end that you will insert into the hole and press, for example, on the edge of the table.

I would not advise you to try this with your hand. If using sharp objects like needles, then use some hard surface to press.

RECOMMENDATION: do not push the needle into the phone tray with your hands. This is dangerous, because you will have to press on the sharp end.

Of course, there are many other alternatives, including toothpicks, safety pins, or just about any other pointy thing around you.

How to open SIM card slot on iPhone

The SIM card slot for iPhone 6 Plus, iPhone 6s, iPhone 5, iPhone 5s iPhone 4, iPhone 4s is on the side of the device.

As in the picture below, you can open it in exactly the same way as in the phone. The difference is zero.

But in the iPhone 3GS or iPhone 3G in a slightly different place. On the upper edge of the device.

SIM card slot does not open. What to do then

But what if the tray is stubborn and won’t open? First of all, try to press harder. Often the issue is resolved.

If it does not help, then first you need to put a key or other object into the hole, which is not subject to discussion.

Next, try to hook the slot with something. You can take a paper clip, bend it a little and try to drag it like a hook.

Some people try to glue something to the tray with superglue, but its strength is usually not enough. It comes off.

Just do everything carefully, otherwise you can pierce through some devices with a needle (you will even see a point of light). Therefore, if you use a pin, then it is better to break off the sharp tip (bite off sharper).

It is possible that the SIM card slot does not open due to the fact that it is broken, for example, the contact is bent and caught. If you pull it, you can break it off.

Also, the slot may not open due to the fact that the SIM card falls out of the groove and clings to the case connector.

Then you can try using a strip of foil or a blade and try to pull out.

Of course, if the slot does not open due to the fact that the SIM card got up crookedly, then it is better to give it to a specialist right away than to break it and only then send it for repair.

Even a professional will take time to disassemble some devices. So be careful, otherwise the consequences of inexperienced intervention can result in costly repairs.

I also suggest watching a video instruction on how and how to open SIM card slots in phones. Success.

What is the correct SIM size?

To make phone calls or use mobile data, you need a SIM card (subscriber identification module), which can be obtained from any telecom operator (MegaFon, MTS, Beeline, Tele2, etc.).

Technically, there are 4 different card sizes for mobile phones:

  • Full size SIM card. Often referred to as 1FF (1st form factor). This is a “giant” size: 85.60 mm x 53.98 mm x 0.76 mm. You probably won’t be able to find it on the market, and none of the Android phones used this size.
  • Mini-SIM (2FF). In some countries, it is commonly referred to as a “large”, “normal” or “standard” SIM card. Most of the phone carriers and manufacturers gradually phased out their production several years ago.
  • Micro-SIM (3FF). It is still the most popular smartphone size. Most mid to budget smartphones use this card. In some regions it is called a “small” SIM card.
  • Nano-SIM (4FF). This is the โ€œsmallestโ€ card available today for a smartphone. Most flagship smartphones require this.

Galaxy S8 and Galaxy S8 use Nano-SIM card.

If you just purchased a new flagship from Samsung, and before that you used a different phone, then you may have already used a nano SIM card in it.

For example, some popular phones using nano-SIM: Galaxy S7 (edge), Galaxy Note 5 and 7, Galaxy S6 (edge, edge), iPhone 7 (7), iPhone 6S (6S), iPhone 6 (6), iPhone 5, Moto X (including all generations) and many more. If you have / have any of these phones, the SIM will work for Galaxy S8 (S8) too.

You can always get a Nano-SIM from your operator (preferable), but you can cut the Micro-SIM card yourself to the desired size, for example, using a special cutter or a clerical knife.

How to remove or replace a SIM card?

You can remove or replace the SIM-card, by analogy with the instructions discussed above.

SIM Card in Samsung Galaxy S8. User Guide

You need a suitable SIM card for your Galaxy S8 and S8 and use it correctly.

This guide will tell you: what size applies, how to insert and change the SIM card, and how to use two SIM cards in the Dual SIM versions.

What is Slot 2 in SIM Tray?

As shown in the figure below, the tray has two slots, regardless of region.

Slot 1 is always for a SIM card.

Slot 2 is used for Micro SD cards and only in the Dual SIM version (model availability depends on your region) you can insert a second nano-SIM card into it.

How to insert a SIM card?

When installing, uninstalling or replacing, it is recommended to turn off the device, although this is not necessary.

To insert SIM card into Galaxy S8 and S8. You need to follow the next 5 steps as shown in the picture below.

Turn off your phone.

Insert the special tool (supplied) into the hole on the tray and push it all the way down to loosen the tray.

Pull the tray out carefully.

Place the SIM card in slot 1 with the metal parts facing down.

Secure it.

Reinsert the tray.

Step 5/1: Turn on your phone.

How to use two SIM cards in the Dual SIM version?

For the dual SIM version of the Galaxy S8 or S8, you are allowed to use 2 SIM cards at once.

Please note that there are some limitations:

  • This only works in Dual SIM version.
  • You cannot use a micro SD card when using two SIM cards at the same time.
  • They technically have a dual standby mode rather than two active ones. But on some mobile networks where 2G is phased out, both SIMs can connect to 3G / 4G networks, and both can work SIMultaneously as active dual SIM phones. Whether it can work like this depends on your operator’s network.

In the dual-SIM version, control is carried out in the “Settings. SIM-card manager” menu. You must indicate which SIM is for mobile data (although both can connect to 3G / 4G networks) and which will be the default for calls and messages. These settings can be changed at any time.