How to insert a SIM card into Xiaomi 8
How to open with a standard paper clip
All Xiaomi smartphones come with a metal clip (key).
The paper clip looks like an oval with a long wire at one end.
- Examine your smartphone. Usually the slot is on the left side (sometimes on the right).
- Find the small hole next to the tray and carefully insert a paperclip into it.
- Press down on the paper clip with some force until you hear a click.
- A tray will slide out of the phone case a few millimeters, which must be carefully pulled out with your fingers.
After that, do the manipulations you need with the sim card or memory card, and then simply insert the slot back all the way.
It is not necessary to turn off the smartphone during these operations.
What to do if the tray does not open (is jammed or bent)
Often, owners of Xiaomi smartphones are faced with a situation where the tray does not slide out at all when pressed, or it appears a couple of millimeters and does not come out completely.
This usually happens if the SIM card inside the case gets caught on internal parts. It may have been incorrectly cut to a micro or nano format, or inserted the wrong way.
Some users try to make a “sandwich”: they glue chips from a SIM card and a memory card in order to simultaneously use cellular communications and increase the phone’s memory. In fact, such homemade tools often lead to tray problems.
Regardless of the cause of the problem, the stuck slot needs to be removed somehow. There are several recommendations on this score:
- if you use a standard paper clip, try to apply a little more force (this will not hurt your smartphone, and the tray may well move further);
- do not poke a needle or pin into the hole, as they may pierce internal parts and cause serious damage to the device;
- if the tray is slightly extended, try to insert something thin (a blade, a piece of foil) into the slot, and gently shake the structure.
As a rule, as a result of such actions, the slot is still unhooked from the case.
Sometimes the contacts inside the smartphone bend, or the tray itself bends. In this regard, you should not press with a paper clip or pull the slot with all your might: the parts may simply break.
Finally, the last way to deal with the problem is to disassemble the phone. An ordinary user is unlikely to be able to do this, so it is better to contact the service center so as not to aggravate the situation.
How to open without a standard paper clip
Of course, the standard key is not always at hand. over, usually users use it only once: when they unpack the purchased smartphone and insert the SIM card. The fact is that there are many suitable items around that will help you get the tray:
- Paper clips. The first thing that comes to mind, because they are practically no different from a standard paper clip. You just need to bend the long end of the paper clip and insert it into the hole.
- Needles. As already mentioned, in no case should they be inserted with a sharp end, but the opposite end will quite cope with the task. Of course, the tip of the eyelet needle is sharper than the end of a paper clip, but it won’t cause any problems.
- Push pins. In this case, you need to choose not the sharpest products.
- Earrings (piercings). Regular stud earrings are great for getting out the tray, since their tip is wide enough and not at all pointed.
Basically, a tray opening item can be found in every home and office.
How to open the SIM card tray with a paper clip
Paperclip is the next more common thing if it happens to you to work in an office.
Just beware of a plastic-coated paper clip, no matter which small paper clip will open the tray. just straighten one end and press very hard.
When finished, do not throw it away, but you can use it in work to fasten different pieces of paper together.
How to insert a SIM card into a Xiaomi Redmi 8 Pro smartphone
1) There is a small hole on the top of the left side of the phone. 2) Carefully insert the key-clip that comes with the phone into this hole. 3) Remove the tray. 4) Install the SIM-card with the chip down (“shirt” up) into the last slot. If you insert the SIM card incorrectly, it will simply fall out of the tray. 5) Push the tray back and check the operation of the SIM card in the phone.
The SIM card slot does not open. what to do then
But what if the tray is stubborn and does not open? First, try more pressure. often the issue is resolved.
If it did not help, then first you need to shove a key or other object into the hole, which is not subject to discussion.
Then try to hook the connector with something. you can take a paper clip, bend it a little and try to drag it like a crochet.
Some people try to stick something to the tray with superglue, but its strength is usually not enough. it comes off.
Just do everything carefully, otherwise you can pierce certain devices with a needle (you will even see a point of light). Therefore, if you use a pin, then it is better to break off the sharp tip (bite off sharper).
It is possible that the SIM card connector does not open due to the fact that it is broken, for example, the contact is bent and caught. if you pull it, you can break it off.
Also, the connector may not open due to the fact that the SIM card falls out of the groove and clings to the connector of the case.
Then you can try using a strip of foil or a blade and try to remove.
Naturally, if the connector does not open due to the fact that the SIM card got up crookedly, then it is better to give it to a specialist right away than to break it and only then send it for repair.
Even a specialist will need some time to disassemble some devices. so be careful, otherwise the consequences of inexperienced intervention can result in expensive repairs.
How to insert SIM card into Xiaomi Mi 8
I also suggest looking at the annotation of how and how to open SIM card slots in phones. Success.
Installing a second SIM or memory card
Next, you need to figure out how to insert a memory card into the device. It is not difficult to do this, the only difference is that the drive and the tray should be inserted in conjunction with the SIM.
MicroSD has special cutouts that do not allow integrating it incorrectly. It is necessary to look so that they are one hundred percent combined. How it looks is shown in the image below:
Then, just like with a single card, you should install the connector into the accessory. It is necessary to ensure that the content does not change position and completely falls into the necessary guides.
What is the correct size of the SIM card?
To make phone calls or use mobile data, a SIM card (subscriber identification module) is useful for you, which can be obtained from any telecom operator (MegaFon, MTS, Beeline, Tele2, etc.).
On a technical level, there are 4 different card sizes for mobile phones:
- Full size SIM card. Often referred to as 1FF (1st form factor). This is a “giant” size: 85.60 mm x 53.98 mm x 0.76 mm. You may not be able to find it on the market and none of the Android phones used this size.
- Mini-SIM (2FF). In some countries, it is usually referred to as a “large”, “normal” or “standard” SIM card. Most of the operators and manufacturers of phones evenly finished their release a couple of years ago.
- Micro-SIM (3FF). As before, it is the most popular size for phones. Most of the medium and budget phones use this particular card. In some regions, it is called a “small” sim card.
- Nano-SIM (4FF). This is the “smallest” card currently available for the phone. Most flagship phones require this specific.
Galaxy S8 and Galaxy S8 use Nano-SIM card.
If you just got your hands on a new flagship from Samsung, and previously used a different phone, then maybe you already used a nano SIM card in it.
For example, some popular phones using nano-SIM: Galaxy S7 (edge), Galaxy Note 5 and 7, Galaxy S6 (edge, edge), iPhone 7 (7), iPhone 6S (6S), iPhone 6 (6). iPhone 5, Moto X (including all generations) and many more. If you have / have any of these phones, the SIM will work for Galaxy S8 (S8) too.
You can always get a Nano-SIM from your own operator (better), but you can cut a Micro-SIM card without the help of others to a suitable size, for example, using a special cutter or a clerical knife.
Which card where to insert?
Almost always, only one receiver can work in 4G, 3G, while the second is exclusively in the GSM spectrum. After installing SIM cards in the tray and starting the phone, go to “Settings” and at the end of the “SIM cards and mobile networks” section, set the defaults by assigning one call (or you will always have a pop-up window from which card to call), and the other web.
To set the type of network for the SIM card that will be used for the web, select the desired SIM. “Network type” and choose 4G, 3G or 2G.
It remains to make the last touch. this is to enable in the main section “SIM cards and mobile networks” the option “Data transmission”.
Enter the “SIM cards and mobile networks” section, then select the desired SIM card in the menu, then click on the “Disable” parameter.
If the mobile operator has not sent the web options for you, then go to the “SIM cards and mobile networks” section. select the SIM card that is used for the web. “Access point”.
How to unlock Xiaomi Redmi 8 Pro smartphone
Method 1. password recovery via Google account1 On the lock display, you need to enter the password by mistake 5 times in order, the inscription “Forgot your password?”. 2 By clicking on the inscription that appears in the next window, we see “enter username” and password from the Google account, of course, the device must be linked to the Google account. 3 The system will prompt you to change the phone password. 4 Enter a new password, repeat it and write it down either we save it in our memory so as not to repeat the recovery function.
restoring access with the help of Xiaomi’s own software1 Log into the PC to the official website of the company. 2 Download and install the Mi Unlock program on your computer. 3 Connect your phone via USB cable. 4 Log into your Mi account. 5 Turn off the device by holding down the power button immediately with the volume down button, enter Fastboot mode. 6 Again connect the device to the PC and press “Unlock”.
Method 3. System Reset (Hard Reset) This will completely reset all phone options, delete all extraneous applications and files, and all your contacts will be lost. Hold down the power button right away with the volume up button. Hold for more than 10 seconds until the specific vibration of the phone, release the buttons. The phone will load the options menu, where you need to select the Recovery item and then Wipe data. The phone will reboot and clear all data on the device, delete all previously set passwords and pattern keys.
Method 4. Removing Protective Files 1 You need to go to the Recovery menu and select Advanced and then File Manager. 2 You have entered the file system of the phone, where you need to select the Data-system item and delete 5 files that are responsible for the lock passwords of the phone itself «gesture.key, password.key, locksettings.db, locksettings.db-wal and locksettings.db- shm “. 3 Reboot your device and the case is finished, all passwords are removed from the phone, it starts in normal mode. And the lock screen will no longer disturb you.
Using Phone Finder 1 From a PC, go to the official phone finder website from Google. 2 Log in, wait for the website to determine the position of your phone. 3 After determining the location of the phone, click on the “Erase data”.
How to insert a SIM card into Xiaomi
How to plug a SIM card into Xiaomi. this question is asked by users who have just bought a phone from a Chinese manufacturer. If in old phones it was necessary to open the back cover, and from time to time remove the battery in order to place the SIM card in a special tray, then in new phones there is a separate tray for the SIM card.
For some users, the process of replacing the SIM card on the phone causes difficulties, therefore it is worth considering the function in stages in order to minimize the possibility of damage to the SIM card and the phone itself.
Reinserting the SIM tray
After that, the SIM card is installed with the tray again into the device case. Installing the card must be done carefully, as this fragile little thing is very easy to break.
The tray must click. Then you need to turn on the device and wait until the inserted SIM finds the operator and becomes active. The name of the mobile provider will be displayed in the top tray.
The device is ready to perform work and domestic functions.
Attention! Some Xiaomi devices have separate slots (Redmi 4 Prime).
That is, one for placing SIM1, the second for SIM2 or a flash drive. But there are models with a mixed slot that can accommodate 1 or 2 SIM at once, as well as a memory card (for example, Redmi 4a, Mi 5, Redmi 5, 5 Plus and others).
Installing a second SIM or memory card
Next, you need to figure out how to insert a memory card into the device. It is not difficult to do this, the only difference is that in conjunction with the SIM-coy, you should implement a drive and a tray.
MicroSD has special cutouts that do not allow integrating it incorrectly. You need to watch them completely combine. What it looks like is shown in the image below:
After that, just like with a single card, you should install the slot in the device. It is necessary to ensure that the content does not change position and completely falls into the desired guides.
Installing a memory card
It is not always possible to implement a SD card. Many devices do not use this opportunity, they already have a large amount of internal memory.
The flash drive is embedded either in an additional slot or in a mixed connector. In the latter case, the tray has two indentations of an unusual shape, while the user must choose. install one SIM and a memory card in the device, or just two SIMs. The second one must be cut to Nano.
The SD card is installed in the same way as the SIM card. A mixed slot is marked with a standard icon; it cannot be confused. Contacts must be directed upwards. To remove the memory module, remove the tray using the above method and pick up the USB flash drive with a paper clip or fingernail.
Simultaneous placement of two cards and a CD-drive
If the developer did not provide for such an opportunity, then you can get out of the situation manually.
Removing the chip from the card
- Remove the chip from the SIM card. To do this, you need to gently heat the plastic on the sides until it becomes pliable, then pry it with tweezers and take out the gold microcircuit. You can use a lighter or hair dryer;
- Gently grind the chip from the bottom side and along the edges with sandpaper, remove about 1-2 millimeters of plastic;
- Use super glue to attach the chip to the CD drive. It is necessary to look for information on your SIM card additionally. The correct location of the chip differs for different communication providers.
Correct placement of the chip on the drive
Gluing two cards is a difficult process, there is a chance to break a USB flash drive, internal contacts, or even completely lose the ability to remove the tray from the device. It is safer and easier to purchase a model that has an additional memory tray instead of a mixed slot.
Installing a SIM card in a new device is no more difficult than in the previous one. Xiaomi devices are similar to each other and open using the same method. If a paper clip was lost or was not supplied, you can use a standard paper clip by first unfolding one side of it.
Using a paper clip to remove
You should take the package in which the device was shipped and take from it a special key (called a “Paperclip”). It can be found quickly as it is secured in a separate paper case.
A paper clip is supplied with every Xiaomi device, since they have a non-removable back panel. Thanks to this key, it will be possible to access the SIM card slot.
If the wrench cannot be used for any reason, then a solid wire of suitable diameter can be used instead. Do not stick sharp needles in order not to damage the removal mechanism.
How to remove the SIM card tray
To insert a SIM, you first need to remove the tray. It is located on the left side of the device, and is removed using the paper clip supplied in the box.
- Find the packaging and look into it;
Packaging with a new smartphone
- After that, remove from there the iron paper clip shown in the image below. Thanks to her, it will be possible to open the smartphone;
Paper clip to eject the tray
Note! Before proceeding to the next step, be sure to turn off the device.
- Place the unit on something soft to avoid scratching the display. It is necessary to ensure that the device does not fall. Find the hole shown in the picture below. It is necessary to remove the tray;
Tray eject hole
- Slowly press down on the paper clip, without applying excessive force, while the tray should slide out;
The tray came out after inserting the key
- Pull the paperclip out and put it back. you no longer need it. Gently grasp the tray on both sides and remove it from the device.
How to insert a SIM card into Xiaomi. step by step instructions
How to insert a SIM card into Xiaomi. this question is asked by many users who have become the owners of a new Xiaomi smartphone. Maybe it’s Redmi 4 or Redmi 5, or even Mi A1 or Mi 6. Of course, this can be any other option from the huge list of devices from this manufacturer from the Middle Kingdom. All that remains is to congratulate! Great choice! Now you just need to turn on the device and insert a SIM card into it. For most users, this operation will seem extremely easy. But there are also those for whom the process of implementing SIM-ki will become a real problem.
Therefore, you need to consider this process in stages. After reading the manual, even a beginner can easily integrate a SIM into a Xiaomi personal device.
Mixed Dual Tray, Nano SIM Card, Micro SDi Card
SIM Cards Supported by Xiaomi
Most of the company’s devices support two SIM-cards at the same time. Therefore, it will be possible to integrate both Nano-SIM and Micro-SIM into the device.
Types of SIM-cards
The device also has the ability to insert a Nano-SIM memory card, but then it will be possible to use only a memory card and Micro-SIM.
Modders on the net have come up with a method to use 2 SIM cards and a memory card. The reception is called “Sandwich”. It is not often possible to cut the Nano-SIM properly, it does not always fit.
What to do if my SIM card is not recognized in my Xiaomi Redmi 8A?
If your Xiaomi Redmi 8A still does not recognize your SIM card, please go to the settings menu of your Xiaomi Redmi 8A. After that select “Connections” or “SIM cards and mobile networks”, then “SIM card management”. Secondly, select the SIM card and press the switch to activate it. Sometimes you want to activate two SIM cards on your Xiaomi Redmi 8A, do not hesitate to refer to our article.
How to activate the SIM card in your Xiaomi Redmi 8A?
When you insert a SIM card, your Android will usually automatically recognize the insertion of a new SIM card. Sometimes you will be asked to enter your card PIN. If this card is new, then the PIN code is 0000, otherwise the code will be the one you specified earlier.
How to put a SIM card on Xiaomi Redmi 8A?
After all, it will not always be easy to understand in what direction and in what place to put the SIM card. When you had to open this SIM and SD card slot of your Xiaomi Redmi 8A, you have to put the SIM card in the right place. Let’s see which SIM card matches your Xiaomi Redmi 8A.
How to Insert SIM in XIAOMI Mi 8. Install Nano SIM Card
How to open the SIM card drawer of your Xiaomi Redmi 8A?
You will need a paper clip or small metal object to open the compartment that will hold the SIM card. On one side of your android, you can see a small box, next to which you should have a small hole. You will need to insert a paper clip into this hole and press down hard enough. A drawer for the SIM and SD card will open. Pull the drawer carefully out of the slot.
How to insert a SIM card into Xiaomi Redmi 8A
You will need to open the SIM card slot as described in the previously described chapter. The SIM card chip should be in contact with the smartphone after closing the compartment. The easiest way is to follow the shape of the slot intended for your Nano-SIM or Micro-SIM.
How to remove the SIM card lock?
To remove the SIM card lock, it couldn’t be easier:
Redmi note 8 how to insert sim card and sd memory card
- Open the settings menu of your Xiaomi Redmi 8A
- Move menu down
- Select Biometrics & Security or Security or Security & Privacy.
- Then on Other security settings
- After that, select Set up SIM card lock or Encryption and the link.
- Uncheck the SIM lock box
How to insert a SIM card into Xiaomi Redmi 8A?
Are you looking for how to insert a SIM card into your Xiaomi Redmi 8A. Indeed, you need to change your SIM card, or you have changed the operator, or you have lost your SIM card. In this article, we will explain to you how to open your Xiaomi Redmi 8A’s SIM card drawer, and secondly, in which direction to place the SIM card. Then we will learn how to activate your SIM card. Later, you will learn how to unlock the SIM card case. Finally, we will learn how to remove a SIM card from an Android phone.
How to remove SIM card from Xiaomi Redmi 8A?
If you want to remove the SIM, you just need to do the opposite. Use the eject tool to open the drawer containing the SIM and SD cards. Place the compartment back in the same direction as you opened it. If you want to deactivate the SIM without removing it, you must go to the settings menu of your Xiaomi Redmi 8A. After that click on “Connections” or “SIM cards and mobile networks”, then “SIM card management”. Then select the SIM card you want to deactivate and deactivate it. If you are looking for other guides on your Xiaomi Redmi 8A, we invite you to read other articles in the category: Xiaomi Redmi 8A.
How to insert a SIM card into Xiaomi Redmi Note 8 Pro?
Are you looking for a way to insert a SIM card into Xiaomi Redmi Note 8 Pro. Indeed, you need to change your SIM card, or you have changed the operator, or you have lost your SIM card. In this article, you will see how to open the SIM compartment of your Xiaomi Redmi Note 8 Pro, the second one into which the SIM card can be inserted. Second, find out how you can activate your SIM card. We will then explain to you how to unlock your SIM card. At the end of this article, you will learn how to remove the SIM card from your Android phone.
Steps to Install SIM Card in Xiaomi Redmi Note 8 Pro
You will need to open the SIM card slot as described in the previous chapter. The SIM card chip should be in contact with the smartphone after closing the compartment. The easiest way is to follow the shape of the slot designed for your Nano-SIM or Micro-SIM.
What to do if my SIM card is not recognized in my Xiaomi Redmi Note 8 Pro?
If your Xiaomi Redmi Note 8 Pro still does not recognize your SIM card, go to the Xiaomi Redmi Note 8 Pro settings. And select Connections or SIM & Mobile Networks, then SIM Management. A second click on the SIM and pressing the switch activates it. Sometimes you want to activate two SIM cards on your Xiaomi Redmi Note 8 Pro, don’t forget to check our article.
How to remove the SIM card lock?
To remove the SIM card lock, it couldn’t be easier:
- Go to the settings of your Xiaomi Redmi Note 8 Pro
- Scroll down the menu
- Click Biometrics & Security or Security or Security & Privacy.
- Then on Other security settings
- And select Define SIM card lock or Encryption and link.
- Uncheck the SIM lock box
How to insert a SIM card into Xiaomi Redmi Note 8 Pro?
Indeed, it will be systematically difficult to understand in which direction to place the SIM card and in what place. After you had to open this SIM and SD card slot of your Xiaomi Redmi Note 8 Pro, you will need to insert the SIM card in the right place. Find out which SIM card matches your Xiaomi Redmi Note 8 Pro.
How to activate the SIM card in your Xiaomi Redmi Note 8 Pro?
As soon as you insert the SIM card, your Android will usually immediately recognize the insertion of a new SIM card. Sometimes you will be asked to enter your card PIN. If this is a new card, then the PIN-code will be 0000, if it is not, the code will be the one that you defined earlier.
How to open the SIM card compartment of your Xiaomi Redmi Note 8 Pro?
To open the compartment that will hold the SIM card, you will need a paperclip or eject tool that is provided with the purchase of the Xiaomi Redmi Note 8 Pro. On one side of your android, you can see a small box, next to which you should have a small hole. You will need to insert a paperclip into this hole and press down hard enough. The SIM and SD card compartment will open. Pull the drawer carefully out of the slot.